How to Make Waterproof Stickers on a Cricut | Die Cut Stickers with Cricut Print and Cut

[@JustMightDIY]

Hello friends! Since Cricut updated the Print Then Cut size and layout in 2023, we created an updated tutorial for you! There's a VERY important caveat about the news sizes that you don't want to miss. Check out the video here: kzbin.info/www/bejne/mJ6al6ykadWsZ9E

[@Thatorganicmom]

I've watched so many tutorials on making stickers with cricut, but yours is the FIRST one that actually made sense and walked through the steps. Thanks!

[@JustMightDIY]

Hey! Thanks so much for the kind words. We’re so glad this is helpful!!

[@Pabloworldwide]

I agree. Clear and concise instructions. ❤

[@dorismiranda4678]

Finally, someone that explains it clearly! Thank you

[@JustMightDIY]

We would recommend checking out our video with cricut's print then cut update kzbin.info/www/bejne/mJ6al6ykadWsZ9E Thank you for watching and leaving a great comment!

[@letsgetdowntobusiness-]

Husband and wife dynamic duo! I love it! reminds me of my wife and I.😂

[@JustMightDIY]

So close. kzbin.info/www/bejne/nKuyk5agZ9GfZsU Thank you for watching!

[@ManifestationsX]

Thanks y’all! Starting my sticker journey!

[@JustMightDIY]

Woo hoo! Good luck!

[@cammiemashburn2012]

I didn't even think about turning the offset to basic cut and contouring. Thank you for that tip

[@JustMightDIY]

Thanks so much for checking out our channel! Glad we could help!

[@StellasScrappyCrafts]

same

[@Splemsby]

Vinyl Stickers, Laser Printer, and Laminate! This addresses my needs precisely. Thank you.

[@JustMightDIY]

Awesome! We’re glad it’s helpful!

[@tanyaamato9619]

I have probably watched 10+ videos about how to make stickers and I want to share that the other 9 left me with too many questions (info overload) and not easy to follow. Your video was easy to listen to, clear instructions and to the point! I made my first stickers today and they turned out exactly as they were suppose to! New subscriber, THANK YOU!

[@JustMightDIY]

Thank you! We appreciate such positive feedback. It's very nice to hear🤩

[@wahabmajeed4307]

This video made me subscribe to your channel. You guys are the best at explaining in detail with the added funny and humour not to make the video boring. Thumbs up!!

[@JustMightDIY]

Thanks so much and welcome to our channel! We’re glad this was helpful. 😄

[@ksigmon6325]

Video was simple and concise but had everything it needed.

[@JustMightDIY]

Thank you! Thanks for checking us out and leaving a nice comment!

[@TheQueenTom]

Finally someone with a laser printer. More often than not, I find inkjet supplies and I'm always so hesitant to stick something in my printer that may damage it... Thank you for the awesome tutorial!

[@JustMightDIY]

Thank YOU for watching! We’re glad it’s helpful.

[@sabrinalong2764]

BEST video I've ever watched regarding Cricut sticker DIY! Thank you so much

[@JustMightDIY]

Thank you so much for such a great remark! And taking the time to check us out!

[@farreldebaltzo]

I so appreciate this video! I am brand new to Cricut-ing - I just got my Maker yesterday! - And this is one of the main things I wanted to do with it. I feel like I can start off with confidence! Thanks y'all!

[@JustMightDIY]

We love you found this so helpful! Since this video came out cricut updated their print then cut. You should also watch this kzbin.info/www/bejne/mJ6al6ykadWsZ9E Thanks for checking us out!

[@farreldebaltzo]

@@JustMightDIY Incredibly helpful! Thank you!

[@Cindyjs93]

lol the most funniest quirkiest tutorial I've ever seen! Keep the jokes coming! Amazing info! Thank you!

[@JustMightDIY]

Glad you enjoyed it!! 😆

[@boydcombsakaGster]

Nice job, guys. Also, the clear listing for all the products and machines shown in the video was great. Thank you!

[@JustMightDIY]

Thank you!

[@lindseyrodrigue9714]

Great video! Loved the easy going nature of y'all and your jokes!

[@JustMightDIY]

Thank you!

[@chutesmith6075]

I want to share a joke my 7 year told me: What did the coach say to the vending machine? Give me my quarter back.

[@JustMightDIY]

Haha - that’s awesome! 🏈

[@Tpforbunghole]

Tell your boy that is HILARIOUS 😂😂☠️☠️

[@donnarivelli6758]

😂😂 cute Good one 👏

[@Studio_Gigi]

Absolutely the best video on Cricut sticker making I've found! Thank you!

[@JustMightDIY]

Thank you so much! We’re glad it’s helpful. 😄

[@loristrout4741]

My husband draws little people and characters. I can't wait to make stickers with them. I have made a few from design space so I know most of what you showed but I have not used all of them, but now I know why you have to flatten them and how to use the contour feature. I have a feeling I will be subscribing to more than just Cricut Design Space. Just imagine!

[@JustMightDIY]

Sounds like you're going to have so much fun. If you post any pictures on Instagram tag us @justmightdiy

[@sozoblogs7826]

thank you! The 306 cut settings is what solved my problem

[@JustMightDIY]

Nice! We’re so glad to hear this helped you figure it out!

[@russbales43]

306 pressure and 2x cut with suggested materials - perfect. Thank you folks a bunch and Merry Christmas.

[@JustMightDIY]

That's great, merry Christmas to you and yours as well! 🎄

[@russbales43]

@@JustMightDIY That Laminate, Oy Vey! Bubble, bubbles toil and trouble! You guys make it look easy. Perhaps a slo-mo video: here's how to do no bubbles. :)

[@JustMightDIY]

It took a bit of practice. JZ is way better at it than I am. We will put that in our list of possible upcoming

[@russbales43]

@@JustMightDIY Thanks. This is my go-to channel for tutorials. I'm brand new to Cricut.

[@russbales43]

@@JustMightDIY After several attempts, I have finally mastered the dreaded bubbles using a twelve-inch ruler with a rounded edge. I took a little sandpaper to the edge of a wood ruler to produce a rounded, smooth side opposite the metal edge side. Apply light pressure. Zero bubbles on 8 1/2 x 11. Yahoo.

[@migmagingenieria]

Great vid, mega useful!!! Thanks a lot for sharing guys and good luck! Cheers from Alberta- Canada!!!

[@JustMightDIY]

Hi José from Alberta! Thank you for watching and taking the time to leave great comment!

[@TiaBryce]

This video is cute. I like how you guys interact. Anyways thanks for helping me make my stickers!

[@JustMightDIY]

Thank you!

Hello friends, Thank you for showing you how the labels are made. A detailed and beautiful narration. I also learned the cutting technique. Thank you for sharing. See you. I wish you have a nice weekend. Big greetings.

[@JustMightDIY]

Thank you! So glad you learned a lot from the video. Have a great weekend!

[@killerkreations6799]

The best tutorial I have come across. Thank you

[@JustMightDIY]

Thank you! So glad you like it. 😄

[@aungsay3283]

Thank you so much for this guide. It’s amazing. It was very helpful.

[@JustMightDIY]

We're so happy to hear that this was helpful!

[@sllashbr]

You guys remind me of Hal and Joanne McCloud from back in the day! Great video! Entertaining to watch 😁 Thanks for sharing!

[@JustMightDIY]

Hey! Thanks so much for the kind words. They mean the world to us! ❤️😄

[@kathryngross6038]

I was gonna say you look on point lol ty ty for suggesting the laminate!

[@JustMightDIY]

Ha! Thanks so much for watching. We’re glad it’s helpful!

[@jasont9045]

Good tutorial. I appreciate avoiding the extra talking on a tutorial. Good job.

[@JustMightDIY]

We’re so glad you liked it!

[@brittneyh4713]

I've been having such a rough time with having my stickers cut all the way through BUT I think your video is my saving grace! I'll post an update by another comment to let you know how it goes, doing more today! YAY!

[@JustMightDIY]

Oh yay! We hope this works out for you. Definitely let us know how it goes. 😄

[@natashabenson2626]

Yes! A tutorial for stickers with a laser printer, i have been searching for a video like this, thank you so much!

[@JustMightDIY]

Yay! We’re glad you like it!! Thanks for watching. 😄

[@soniasigl1191]

Awesome presentation, I love that you kept it short. Thank you.

[@JustMightDIY]

Thank you! So glad you like it!

[@hunterk9wholesale739]

Awesome Video, just ordered the paper and laminate - will watch a few more times once they arrive! thanks!

[@JustMightDIY]

Fantastic. Hope it goes well! Let us know

[@russbales43]

Fantastic tutorial. Thanks for taking the time to create it. I was able to follow right along - with a lot of help from the pause button and also the j, k, l keys > back up 10 seconds, pause, forward 10 seconds.

[@JustMightDIY]

We're glad. We know it's a lot to do, but it gets easier every time!

[@russbales43]

@@JustMightDIY Indeed it does. Practice, practice. P.S. I do post production video editing as a sideline. Your videos are smooth. What program do you use?

[@klomax7089]

You two are just too cute! 🥰 Thanks for a very informative video! 👍🏽😊👏🏽

[@JustMightDIY]

So glad you like it! Thanks for watching. 😄

[@vickibradley3120]

Exactly what I've been looking for. Thank you so much for making it so easy. Just created my first 2 full sticker sheets in under 10 minutes with your help. Thanks again.

[@JustMightDIY]

Oh yay! Thanks so much for letting us know. We’re so glad to hear that this worked for you. Happy sticker making!

[@whitney24100]

@@JustMightDIY how do you get the kisscut?

[@JustMightDIY]

@@whitney24100 Hey! You’d reduce the pressure. You will want to test this with small shapes until you find the exact settings for the materials you use. Hope this helps!

[@masayocole2713]

You guys are too cute. Thank you for sharing.

[@JustMightDIY]

Thank you so much! For watching and leaving a sweet comment!

[@kamiGTR]

Thanks for the tutorial guys 🤗🤗🤗🫶🏽

[@JustMightDIY]

Thank YOU for watching!

[@AussieMumVLOGS]

Wow I've just subscribed! You explained that so well and I really appreciate it! I wana make stickers for my kids 😊

[@JustMightDIY]

Awesome! We’re so glad you like this. Thanks for watching and happy crafting!

[@NicoleRanzolinCheil]

Thank you for the awesome video! Do you know how to make it like this but so the stickers come out on a sheet?

[@JustMightDIY]

Yes, we did a video on kiss cut stickers as well. kzbin.info/www/bejne/i5OngKqDjJl7fMU 😁

[@lbinterviews]

You guys really know your stuff!

[@JustMightDIY]

Thanks!

[@gregtrail3491]

Thank you for getting straight to the points and showing fully step by step. I'm new to this, and outta 20 videos, you guys were the best! Subscribed :)

[@JustMightDIY]

Oh wow - that makes us happy to hear! Thanks for the kind words and for subscribing! 😄

[@kyrstenmelville7952]

Seriously!! Thank you SO much!!!!! I have not found a tutorial as good as this one!!! thank you !!!!!!!!

[@JustMightDIY]

Thank you for watching and for the great compliment! Happy crafting!

[@brendacoone8757]

Thank you so much for this tutorial!

[@JustMightDIY]

Thank YOU for watching. We’re so glad it’s helpful!! ❤️

[@steviej361]

Very informative and helpful tips too thank y’all

[@JustMightDIY]

Thank you! We appreciate you watching!

[@atecharinaYT]

Thank you!!! You guys explained it sooo well. ❤

[@JustMightDIY]

We’re so glad it worked for you! Happy crafting. ❤️

[@miosotisreyesclass6738]

finally a video that explains well tysm cant wait to make my own stickers

[@JustMightDIY]

Thank you! We did make a second making stickers video using holographic components kzbin.info/www/bejne/nKWuZKWMmspqjqM

[@whizzdalkeith559]

excellent video..really learned a lot

[@JustMightDIY]

Thanks so much! We’re glad you enjoyed it. 😄

[@lupevalentereyes6601]

Thank you for making my first time making stickers so much fun and hassle free!

[@JustMightDIY]

Fantastic! Thank you for watching us and leaving such an awesome comment!

[@irishdawn8387]

wow this is perfect for my labels

[@JustMightDIY]

That's fantastic! Hope they come out great!

[@irishdawn8387]

@@JustMightDIY me too. I needed to make my own labels for my binder tabs for personal stuff

[@JustMightDIY]

We have used this for similar, labels for jars of honey and business stuff!

[@sweetsbeta]

Thank you so much! I have been struggling so hard with stickers

[@JustMightDIY]

Thanks for watching! We’re glad this is helpful! 😄

[@Bakencraft]

Best tutorial ever!!!!! ThaNK YOU!@!!!!!!!

[@JustMightDIY]

We’re SO glad it’s helpful. Thanks for the kind words! 😂

[@bobslfcu773]

Awesome video! A couple small bubbles the first time but that was it. They came out nice after that.

[@JustMightDIY]

Thanks so much for watching! We’re glad you found this helpful and are so happy to hear that your stickers are coming out nicely!

[@phylstamp]

Loved this tutoriak- cleared up many questions- still have one more question- You used vinyl sticker paper to print on. I've seen this done with non vinyl sticker paper . Why would you use vinyl? Thanks

[@JustMightDIY]

Thank you so much - we’re glad you enjoyed it! After testing a few different ones, we liked the quality of this particular sticker paper, and it also worked in our laser printer.

[@ajeevaughan4293]

Hello, your video was extremely helpful! Would you all be able to provide the material selected and pressure type for cutting?!

[@JustMightDIY]

Hello! Cut settings are in the video, and materials are listed in the description! Hope this helps.

[@tinkerandteal]

Thank you so much for using my designs!! I really appreciate it!!!

[@JustMightDIY]

We LOVE your designs!! You are so talented. ❤️ 🌵

[@ta2mscribbles]

I WANTED A CRICUT MACHINE BUT ITS A BIT EXPENSIVE...HEHEHEHHE I ENJOYED WATCHING YOUR TUTORIAL!!! SO EASY TO FOLLOW 💓

[@JustMightDIY]

Oh thank you! We’re glad you enjoyed it. ❤️ Cricuts are expensive, but they can be a good investment overtime. Sometimes HSN has them on easy pay, which helps spread out the cost. 😉

[@ta2mscribbles]

@@JustMightDIY i agree coz cutting with scissors is a PAIN!! 😩😩😩😩 I printed some stickers just recently and my hands were dying from cutting tons of Stickers 😂😂😂😂😂😂 That is why i was looking for Cricut tutorials even if i dont have the Machine 😂 Silly me

[@JustMightDIY]

We can imagine how hard that must have been! Since Cricut just came out with their new machines, the previous models (Air Explore 2 and original Maker) have been on sale. You may also find a good priced one used on Facebook Marketplace from someone who upgrades to the new models. Good luck!

[@ta2mscribbles]

@@JustMightDIY thank u so much!! Might check 'em out!💓

[@anchor213]

just what i needed . this video helped a lot.

[@JustMightDIY]

We’re glad it was helpful!

[@ItsJasmynMarie]

Y'all are so freaking cute!! 🥰 I have watched quite a few sticker how to's and this is my favorite by far!! Great info and tutorial! Thanks for sharing guys!! 🥰🥰

[@JustMightDIY]

Oh thank you!! We’re glad you enjoyed it and are so happy you found us! ❤️

[@grannygamerquilter]

Yay! This was very informative tutorial. It was simply plantastic!

[@JustMightDIY]

Yes, very succulent! 😆 thanks for watching!

[@StellasScrappyCrafts]

Thank you. I was tearing my hair out (actually I don't have any cos of Chemo :)) trying to work out how to do this. I was "attaching" but it was cutting out the letters as well. I have made sure I entered all the instructions in the project for when I have to do it again, cos I am sure I will forget. I didn't worry about the P&C size and layout, I just printed on A4 and adjusted the printer paper size, and DID NOT attach all the images and it just printed what was on the canvas. Do you have a video on what "weld" and "combine" etc is used for? (from Australia)

[@JustMightDIY]

No, we don't have a video covering that. Most what we do doesn't cover features in programs but tutorials or plane Ole messing around. 😁

[@StellasScrappyCrafts]

@@JustMightDIY no worries. Thank you

[@AussieMumVLOGS]

Wow!!!! Could you show us how to make personalised stickers?

[@JustMightDIY]

Hey! What kind of personalization are you wanting to see?

[@AussieMumVLOGS]

@@JustMightDIY Sorry, I'm on Australian time haha. I'd like to see how to make my own funny quote or how to make stickers with my kids' names. Unfortunately in the shops they never have anything with my kids names lol. Or Christmas stickers with a character and a name. Also, what does flatten do?? Have you ever made heat transfer for a shirt? I just found your channel and I'm loving your personalities and its funny when your husband calls things the wrong name and u help him, it's endearing and reminds me of myself.and my husband lol. Also your tutorial is really easy to follow and I'll probably watch it while I make it lol.

[@ballanballan]

excellent video

[@JustMightDIY]

Thanks!

[@pastuh]

Can you suggest alternative materials for EU shopping?

[@JustMightDIY]

Hey! Thanks for your question. Unfortunately, we can’t help with that.

[@hart-books]

This is exactly what I was looking for. Very well explained. I think I can do this now! THANK YOU!

[@JustMightDIY]

That's fantastic! So glad you appreciate our work and THANK YOU! for watching!

[@LoveMyStyle95]

I've been wondering for quite a while now if the Oracal Vinyl could be used like this, but haven't been able to find anyone doing it. They all use the Avery kind, but I can't buy that atm, so THANK YOU! And all the other tips, just wonderful!

[@JustMightDIY]

You’re welcome! So happy this was helpful for you. Thanks for the comment!

[@cynthianegrete5067]

Now DS has the Guide feature for that shape behind images.

[@JustMightDIY]

Awesome - thanks for sharing! Love to hear Cricut improve the DS experience.

[@dshell1095]

Thank you so much for updating this informative tutorial. I look forward to future ones. Also, does the new oracle laminated vinyl come in sheet or can you show how one would cut vinyl for laser printer (or if it can go through a laser printer). Thank you.

[@JustMightDIY]

Hey! The clear laminate doesn’t go in the printer. Thanks for watching!

[@cynthiasmith4875]

Great video!! Just what I needed!! Kept doing wrong!! Made it easy to follow!! ❤❤

[@JustMightDIY]

That's great! Glad it was so helpful! Thank you for watching!

[@Artbyevelyn]

For sticker cutting I choose brother scan and cut it’s really easy to use and you don’t waste any vinyl

[@JustMightDIY]

That’s awesome to hear! Glad you have something that works well for you. 😉

[@doreenkennedy7921]

Very helpful, thanks!

[@JustMightDIY]

We’re glad it’s helpful!

[@pirategrrl775]

Wow--what a great video! I just got my Explore 2, and you've made me worry so much less about how I can make stickers! Thanks!

[@JustMightDIY]

We’re so glad it’s helpful!! Happy sticker making. 😄

[@SR-yq2tu]

Best how to tutorial! Thank you!!

[@JustMightDIY]

Oh thank you! So glad you enjoyed it. 😄 Thanks for watching!

[@allisonilene]

I like the video but why did you use that particular paper and laminate instead of glossy waterproof sticker paper?

[@JustMightDIY]

Hi and thanks for your questions. Glossy paper does not work in our laser printer. 😉

[@brawlikbroly4284]

Very good video thank u

[@JustMightDIY]

Thank you!

[@lyndalu7493]

Can you use this same process to make bumper stickers?

[@JustMightDIY]

Hey! We haven’t tried to use these as bumper stickers. You’ll probably want at least a UV-stable ink, though. Thanks for watching!

[@5172sfrost]

The absolute best tutorial video I've watched! I followed your instructions and made stickers today for my husbands company. Everyone now has one on their hard hat! You made it so easy and can't wait to watch more of your stuff. I watch a lot of video's and I understood each step! I'm kinda a newbieI Perfection!

[@JustMightDIY]

Thank you so much! This comment made our day. ❤️ We’re glad you found us. Happy crafting!

[@Krulgrafix]

Great for indoors but might not last long in the elements if you try to sell your home made stickers. Sticker and graphic shops use specialty vinyl made for that type of use. Oracal 651 is vinyl not laminate, but you gotta work with what you got.

[@JustMightDIY]

Thanks for watching. Oracal markets the product as a laminating vinyl and indicates that it's one of the thinnest on the market. We've been happy with our stickers. Thanks again!

[@tamro6823]

What pressure settings should be used to get a great cut with a cricut maker?

[@JustMightDIY]

Hello! The settings we used for these are included in the video. Thanks for your question!

[@adrianavergara2432]

Thank you ! you made cutting my stickers so easy !

[@JustMightDIY]

Awesome! We’re glad this was helpful!

[@cynthiasmith4875]

So excited to try!! 🎉

[@JustMightDIY]

Let us know how it turns out!

[@sandeebond4514]

I’m just learning my new Cricut Explorer and this video helped me understand the process of making stickers and now I’ll be purchasing a laser printer soon. Thank you🌵👍🏼. Joke:Beware what you do in the garden….the corn has “EAR’S”,the potato has “EYE’S” and the bean “STALKS”😳.

[@JustMightDIY]

Hahaha love the joke! And thanks so much for commenting - we’re glad it’s helpful!!

[@alex0lan]

I love how you explain all step by step. Please, I need to know what blade are you using because I try with the factory blade but unfortunately won’t work for me just cut the laminated vinyl but not the backing paper . Thank you so much for these videos.

[@JustMightDIY]

Hello! We’re using the Cricut brand blade. As we have the Maker, we use the Premium Fine Point blade (white caps). If yours isn’t cutting all the way through, try a new blade or increase your pressure.

[@alex0lan]

@@JustMightDIY thank you for your replay! I’ll try with the premium one. Something else I want to know, what do yo mean with the “white cap”?

[@jacobdaugherty4052]

Good job, very thorough.

[@JustMightDIY]

Thanks so much!

[@skypiratealayer]

Started this thanks to y’all. I think I’m using too thick of a transparent vinyl, so I ordered the item y’all suggested. Made community day Pokémon stickers.

[@JustMightDIY]

Hey there! We’re so glad to hear the new laminate worked. Happy crafting! 🥳

[@Fiercecat20]

Hi there, I used the link provided and purchased what I thought was the oracal 651, but it instead links to the Oraguard laminating film 200 which looks like it’s completely different

[@JustMightDIY]

They may have changed the name but that still is the laminate that we ordered and used twice! Thanks for checking us out!

[@IraQNid]

I've got the Brother Scan N Cut 125e and a color laser printer as well. Nice to see some steps in your video that carry over to my setup. How much are you spending on the OraCal laminate sheet? You might like the 3 types of lamination cartridges for the 900 series (9 inch) Xyron cold press lamination machine. * Full lamination both sides * Lamination + Adhesive (for making laminated stickers) * Lamination + Magnet (only 10 feet of material due to thickness of magnet material) Their lamination material is marketed as an archival, UV, pH neutral film that will not peel or separate once you cut into it. So you can use it to make custom cut shapes, to seal precious documents, make pool or aquarium art, decorative chew toys for your little fur baby, waterproof and fade proof magnetic art or puzzles for the fridge, vehicle, etc. The SDX 125e simplifies alot of the steps you're performing by allowing me to do it on the cutter itself or in their desktop software. Like I was saying it is nice to see how other folk are making cool stickers from home. Not so long ago these sorts of features were relegated to super pricey professional level plotters/cutters and print services.

[@JustMightDIY]

Very interesting! We’ll have to check out the Xyron - had one of the smaller ones years ago. The only question we’d have on that is how to get around the issue of the Cricut needing the black line around the page for print and cut (and not laminating over that. Still something worth exploring! It’d be nice to simplify that step. Thanks for watching and for the tips!

[@IraQNid]

@@JustMightDIY The sensor for the Cricut doesn't read through transparent laminates? So what setting would you use if you were trying to cut out clear water slide decals, or static clings, or even overhead transparencies from your laser printer so you can make sun catchers?

[@JustMightDIY]

If they’re glossy, it could effect the sensor for print and cut according to what we’ve heard, through we haven’t tested that theory. We haven’t tried water slide yet. Again, it’s worth exploring for sure.

[@aracelysee9665]

@@JustMightDIY You can stick some matte clear tape over the black lines around the page. You can also close the top lid to prevent light from reflecting off the shiny laminate. I've done both and it works great with my Explore Air.

[@JustMightDIY]

@@aracelysee9665 great tips - thanks for sharing!

[@cuanticlove]

Gracias! Me encanto y aprendi mucho.

[@JustMightDIY]

Gracias por ver!

[@itryed8426]

You are amazing guys 🙏

[@JustMightDIY]

Thank you!! We’re glad you liked the video!

[@rowentremonti7671]

Loved the video!!! Some edges of my stickers are kinda rough, even after a new blade. Any tips?

[@JustMightDIY]

Thanks so much! We haven’t had rough edges. Maybe try adjusting the pressure. Not sure if more or less would fix it, but that’s what we would try to play with!

[@AlaneLane]

Very good tips; thanks so much guys.

[@JustMightDIY]

Thanks so much! We’re glad it was helpful. Happy crafting!

[@Tomat0Nose]

This is super useful, thanks so much!

[@JustMightDIY]

Oh yay! Thanks for watching and for letting us know! 😄

[@rickmatic21]

can you actually do custom color of your choosing for the base? instead of white?

[@JustMightDIY]

Yes you can! Just change it to the color you want inside Design Space. Hope this helps!

[@laurakrukowski3923]

Do you need to add an offset? Thank you!

[@JustMightDIY]

Offset is not required if you want it trim to your original image. Thanks for watching!

[@jackiemikulski8013]

Thank you for this! Can you tell me what ruler and paper cutter you used?

[@JustMightDIY]

Hey! That ruler has been discontinued, unfortunately. The newer version of the paper cutter is here: www.amazon.com/Fiskars-SureCut-Portable-Paper-Trimmer/dp/B000OMYB18?crid=SEJTIDXWVR78&keywords=fiskars+cutter&qid=1666703126&qu=eyJxc2MiOiI0Ljk3IiwicXNhIjoiNC41OCIsInFzcCI6IjQuMjEifQ%3D%3D&sprefix=fiskars+cutter%2Caps%2C100&sr=8-8&linkCode=sl1&tag=jzjmdiy-20&linkId=6698c4f7506fa2a79c5de0749474681f&language=en_US&ref_=as_li_ss_tl

[@sheareramericanmadedesigns3990]

Question, how do you keep you stickers flat while displaying them to customers?

[@JustMightDIY]

Hey. We don’t sell our stickers. However, the best way to keep things flat is to not get them curled in the first place. Be careful when you’re removing them from the mat. Hope this helps!

[@Danny-jp9md]

Hi guys, thanks so much for the video. You guys are awesome ! easy explaining step by step. I had issues with the pressure on my laminated stickers til I found your video. Subscribing now. Looking forward to learning more from you guys !

[@JustMightDIY]

Thanks for watching! And leaving a great comment!

[@SummerSausage1]

whats the model number for the canon printer? thats amazing quality for a color laser printer

[@JustMightDIY]

Hey! Thanks for your question. The printer is listed and linked in the description. Hope this helps!

[@hunterbhal]

How did you make it cut the stickers out individually instead of them sticking to the back square sheet?

[@JustMightDIY]

Hey! That has to do with the pressure. I’d you’re only getting a kiss cut, increase your pressure. Hope this helps!

[@OkOk-kk5ys]

Great video! Can these stickers by applied on a wet surface? Can they be used under water? In an aquarium.

[@JustMightDIY]

Hi and thanks for watching! We have not tried such a thing with that products we were using, so we can not say for sure.