How to make welding machine using only 12V Battery

[@-na-nomad6247]

2 important things to keep in mind 1 : Clean the graphite well before use, the wax from the battery will produce heavy smokes and catch on fire, potentially destroying the wires, it also doesn't stay off if you blow it off, it'll just light back up in fire untill the rod is cool enough. 2 : Use thicker wires and don't keep the graphite on the object for too long, the wires will heat up and catch on fire, that's extremely dangerous.

[@hamzahsadiq1212]

Is there a way to make this same system but as a plug in?

[@AP-Apap]

Can I use laptop charger instead of 12v battery?

[@-na-nomad6247]

@@AP-Apap Not enough amps and will most likely burn out.

[@-na-nomad6247]

@@hamzahsadiq1212 As a plugin ? What do you by that ? Like a self contained thing ?

[@-na-nomad6247]

@Scarlet_message3 Yes, the battery will get weaker and weaker and won't hold its charge anymore.

[@rikqrdo]

Making use of the kzbin.infoUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type

[@Olgi41]

I once did an emergency solder repair on a truck radiator with this method using the truck battery, booster cables, the carbon rod out of a D cell, and some solder I had in my toolbox. It worked, but it was a very hot arc and I had to move very fast.

[@everetteberhardt5629]

legend

[@DrAgan_tortojed]

Just add a diode (simplest type, so-called rectifier diode of at least 8A) in series (you can solder its minus pole on "+" of the battery and then the cable on the "+" of the diode). This way nothing changes much, only the battery is better protected from short-circuiting.

[@ksand6718]

He should remake the vid with this tip in mind.

[@jenniferphillips8956]

*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*

[@ErrorXTech]

can I use an Adapter eg. a Laptop charger? is there any chance it might destroy the adapter or melt the plastic that is inside the male plug

[@gregoryruslavage8656]

I saw this exact comment posted on other videos by a different user

[@asu-57tankoffical]

@@gregoryruslavage8656 its a bot

[@backyard.craftsman]

In Vietnam, they use the coals of the battery to produce fake coffee. But u have shown how useful the coal can really be. A bright side indeed. Thank for the video

[@Tri_Nitro]

It can be used as a emergency measure, but you should not attempt this regularly. It causes damage to the battery and might lead to fire/explosion/failure of the battery. The solution with condensator in line would be better

[@sidamarali3030]

You mean the capacitor should be joined in parallel to the battery?

[@jacobleeson4763]

You don’t know what you are talking about. With lithium yes. Lead acid can handle this. Many of these batteries are designed for cars which can draw 1000+ amps. Battery life may not be the best but it will be good enough to do countless welds and certainly isn’t a safety issue.

[@crowbaril903]

Or add a big fuse like one from car audio

[@tristan6509]

Note: only use carbon zinc/heavy duty batteries, alkaline batteries will explode if you cut into them, and they also don't have the carbon rod that is needed for this project.

[@phantomph1688]

lol I almost cut into a alkaline batteri

[@phantomph1688]

But does lithium batteries work?

[@tristan6509]

@@phantomph1688 that's even worse kzbin.info/www/bejne/jZ-9poCcppuem8U

[@vonkrass]

Thx pepe

[@marklepkowski5362]

Can you use a regular carbon rod made for welding?

[@andrewhewitson6682]

I don’t think I will ever recover from watching him individually wrapping the wires around the terminals

[@rafab2774]

Yep. Equal to rubbing an asshole clean instead of using a toilet paper.

[@FranciscoMartinez-of3gr]

@@rafab2774 hahaha!!!!

[@SNCarollisson]

The pain. He is too slow at times. The video could have been done in 4mins

[@alyoussefrou8177]

Andrew Hewitson ohh dud me too. This is how Indians make contents a lot of blah blah or a lot of nothing

[@ravimurty5266]

In Indian movies ghosts are always shown as slow lazy moving dumbos ....certainly irritates though

[@husse60]

Thank you Jame. I am Hussein from sweden 🇸🇪.

[@carsonw722]

This is 100% legit, and it actually works quite well. I would suggest finding a different power source, this will destroy the 12v battery.

[@nadiamaslouhi8719]

No

[@carsonw722]

@@nadiamaslouhi8719 no what?

[@alifio2183]

@@carsonw722 please do tell a way to do this without killing the battery.

[@carsonw722]

@@alifio2183 sorry, I actually have no idea. Hooking it up to a wall outlet would be idea. But I'm not sure how to safely do that. And please dont try it.

[@alifio2183]

@@carsonw722 to make it plugged to a wall it requires a plug, a transformer, a full bridge rectifier and induction coil... its easier than a mobile welder boi

[@qwertyqwert4688]

В России этим методом пользовались лет 30-40 назад, для сварки свинца и ремонта аккумуляторных батарей... Клеммы, перемычки...

[@ZincFold]

Great for emergencies.

[@cocomartinez4863]

can i use a regular welding rod?

[@bluecrafter_]

No

[@midimike72]

Lead acid accu shorted... 8 Amps... Hope you got a good insurance.

[@CreativePassion88]

You did very well dear friend.

[@noobbuilderproductions7865]

I watch this and then immediately did it and it works like a charm😂😂😂👌🏽👌🏽👌🏽❤️❤️❤️❤️🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽thank you so so much!!!

[@NEKOTAROU-xj8jw]

Nice to meet you, my name is NEKO🐱TAROU, a Japanese KZbinr. You can weld the blade of a cutter knife with a 12V battery and a dry battery carbon rod! I was surprised. I will refer to it. ☺ I subscribed to your channel. 👍

[@bhsim2897]

You make yourself a mini Jedi weapon!!

[@paolomartini150]

One strend at the time in slow motion. But maybe there is a way to make it even longer.

[@Stisse12]

The weakest point will burn off first!

[@davidkelly1414]

Much helpful advice posted here about risks and precautions. The one thing I am concerned about is that there is no warning about UV risk. It maybe a simple effective tool but it still spews out dangerous loads of eye-destroying UV. You must use a welding helmet !

[@jacobleeson4763]

Those are a waste of money. Sunglasses are just as effective

[@levisylvester]

@@jacobleeson4763 heeellppp no!!!!! Did you ever use a Real welding Helmet? It's much darker! It will kill your eyes

[@jacobleeson4763]

@@levisylvester I have a real welding helmet. I have actually done it the other way though and didn’t go blind. But you can get dark enough sun glasses they do exist. Just have to actually check the specifications before hand. The automatic darkening of the welding ones can be nice. For something like this though real welding would actually probably be too dark though even on lowest setting. Welders can provide up 250 amps even for cheap ones. This battery can supply maybe 50 amps at most. If you use a big car battery then it can provide 600 amps but this appears to be a cheap lead acid battery not designed for cars. I have one that is almost identical I use for powering the air intake fan on my melting melting furnace. I also have a real arc welder capable of up to 300 amps that I have used without even sunglasses before. Obviously you can get hurt by extreme light especially in the uv spectrum. But it’s not as bad as people say. You are looking at long term damages. Not short term. If you do it everyday for years you’ll notice it near the end of your life. You may have pain for a few days after doing it in the short term. Hasn’t happened to me yet though.

[@levisylvester]

@@jacobleeson4763 I that it's not needed for stuff like this. It's Almost like gas welding. But I would not Risk it on Real welding. That's just dumb. It's your eyes!!!!!!!!!!

[@elliotgodwin914]

A common mistake that a lot of people make with welding is that they only protect their head. Back in my noob days I got 2nd degree UV Burns from only having a wife-beater on you have to have all exposed skin protected I got second degree UV Burns all over my neck arms and chest area and welding for 30 minutes straight.

[@jeffchristianson-ziebell]

Watch this at 2X if possible. 5 min woulda been too long- TRUST ME here

[@davidsnydersr.5725]

This video is just what I needed, I have been curious on how to make a welder with just house current

[@bobbyhandley5581]

House current? From what I heard from other people who tries making welders using house current, it 100× overkill and will light the room up with an ungodly white light. I'd stick to battery powered preferably. Unless you have a welding mask and have done more extensive research into that part.

[@cyriljude3033]

Can it be used for spot welding?

[@noobbuilderproductions7865]

step by step I love it!!! thats the way all tutorials should be, from the painfully long process of curling wires, to the finished product!!! keep it up I am looking forward to more useful videos!!! Thank You!!!

[@PootaurStuff]

Great way to cause an explosion, fire, or permanently blind yourself. Do NOT do this!!!! Notice how even the battery has written on it to avoid short circuit! ONLY AN IGNORANT FOOL WOULD DO THIS!

[@noobbuilderproductions7865]

@@PootaurStuff not really because it actually worked for me notice how I did not cause an explosion, fire, or permanently blind myself. Maybe you are the ignorant fool? ;)

[@PootaurStuff]

@@noobbuilderproductions7865 Whatever! Keep doing it, sooner or later your luck will run out! Why do you think it says avoid shorts on the battery? Oh, what do I know even being an electrical engineer and taught electronics for 43 years... I guess I am ignorant! If one of my students dare shorted a battery they would be in so much trouble. YOU DO NOT KNOW WHAT YOU ARE TALKING ABOUT! This is so dangerous... BTW I have also worked at an EMT and have seen battery explosions with my very own eyes... so what do I know... I must be ignorant!!! Have you NOT read about batteries exploding in vaping devices? The coil is so close to being a short, and people get their faces blown up... so what do I know.. I must be ignorant... duckduckgo.com/?q=+shorting++battery+explosion&atb=v222-1&iar=images&iax=images&ia=images

[@викторжуравлев-щ4э]

Самое эпическое и завораживающее действие подключение к аккумулятора

[@richardwolski5899]

Cheers.could you use a welding rod to replace battery core ..

[@nantahalarat]

Works good for welding razor knife blades together, but who needs to do that?

[@Pipizzakitchen]

Freddy Krueger and also ninjas.

[@kratos_6.9]

Nice battery killing machine 👏👌

[@cepalo84]

Why are so much negative people here? I think thats a great idea and i hope for more interesting videos ... thx

[@icy_bit7306]

cepalo84 I think it’s a terrible idea, it can short and explode at any time making sulfuric acid mist go everywhere. And you destroy the battery by doing this.

[@genewickersham4593]

It's astonishing that at least one third of these comments are from people who can't be bothered to spend ten minutes to learn something new and actually blame the inventor for the time they chose to waste.

[@stormhawk31]

What is the rod you pulled out of the battery made of? How long does it last before it needs to be replaced?

[@manniefresh7354]

Carbon rod. You can get thicker ones from lantern batteries

[@SomaElectricals]

what it use.. why should weld blades

[@chutony7802]

For demo only

[@carlosgrajeda4465]

It's the greatest thing I saw in this kind of thing. GOOD IDEA !!! 👍👍👍👍👍👍👍

[@farhadvandem5371]

Thanks for idea.iam inventor farhad nesari from iran

[@MrBuash]

It nice to know and useful at emergency situation.

[@farlesthan1479]

@Sudhir Kunder emm but leadacid battery never explode..

[@हिंदीटेक्निकल]

यह मैंने भी बनाया था बहुत अच्छा काम करता है

[@nicholecrouch311]

On a sarcastic note I can count so many times i needed to weld razor blades together LMAO! On a serious note that was badass! Is the small battery core the welding rod? I could have actually used this tiny thing when welding exhaust and extremely thin metal pieces together I normally blow hiles through like no other I'm gonna note this thank you for posting

[@vikkonstruct3686]

Simple and powerful, like the other things you do. Thanks!

[@kaweatokbasri]

I like your idea

[@paulinfrance5]

Great video but you could have cut it down to less than 5 minutes.

[@jasinyzo2561]

Thanks its very cool

[@davidmunoz1136]

Ahora boy hacer manualidades Con esta soldadora increíble. Exelente vudeo.. nunca acaba De aprender uno.. gracias x este video

[@جوادمهدیزاده-ط8خ]

برنامه خیلی جالب جزاب و دیدنی بو د

[@kbd5681]

Wow now thats increadable bro i am in awe over this!!!! GOD BLESS BRO AND EVERONE!!!!

[@ragnarilves6579]

It doesn t work great i tried it with 2 car batteries

[@pelicanbeater6100]

I've been a code welder for over 25yrs and here's so advice, your electrode is in th wrong angle, those razor blade are ok but they're hardened so use mild steel instead, try using a 3/32 7018 rod tap it on the corner of a desk and bust the

[@sopharpro]

Great ideas! We can use it in case of need!

[@rafab2774]

Yeah. That is how Scarface was born !

[@ponchosanchez9599]

So can i weld a cracked bike frame with this? And will it hold?

[@chalesman3855]

looks !!DANGEROUSLY EXPLOSIVE!!

[@lyntoncox7880]

chales man nothing to explode but it gets very hot at around 1200 celsius!

[@MariAna-km9vs]

Trimakasih dan sangat bermanfaat. 👍👍👍👍👍

[@boiivilla9531]

30 yrs in welding job...when you're going to do this kind of welding...do it in a forest...when the battery blow up....no other casualty.

[@johnnyblowfly9895]

We dont need no water let the matha f ing forest burn.

[@pooorman-diy1104]

use bigger battery ... i think it's safer ..

[@rafab2774]

@SSSniperKhan Of course IT DOES. I know the victims by the names. And it burns like hell. Get your lessons done.

[@vicewize]

PPMelon I’ve seen not sealed Pb batteries (w caps) blow the caps off, crazy stuff, so being sealed, well I don’t know... I’ve had quite a few Lipos and Lions blow up/catch fire on me (one 18650 in my truck!, good times and sweet 3rd degree burns and cool colored brown headliner now with umm “performance air vent holes” in them. These were 18650s with (my fault) worn out wrappers and the lipos from my drone/FPV life, it’s scary as F though! Especially if it happens during charging in your house/garage (yes I charge in fire proof battery box). And good luck putting lipos out once on fire as well with anything you have handy, like water.

[@justinward7380]

That's not welding it's barely even fusing

[@GS-bd9zh]

It doesn't work

[@msaher5960]

Yes

[@themaximusone]

prove it do better and post it other than that stfu ;-)

[@beaudouglas6079]

KB MILLER get four car batteries and a stick electrode test it out or stfu

[@EchadLevShtim]

It still hits the apocalyptic survivalist enginuity bar.

[@tttt-vs8dk]

Instard of Battery rod can we use solder with flux attached to that wire?

[@12volthighpeakvanlife.62]

No i don't think ? it would melt too fast and possible spit as the solder flux core heats up thats why arc welding rods have a coating on them so only the right amount burns / welds at a time as you push the rod along the area to be welded .

[@tttt-vs8dk]

@@12volthighpeakvanlife.62 Thank you 😊

[@MicroMidas]

That soundtrack is like getting a chainsaw driven in to my ears. I'd prefer if you didn't have any music actually. Please stop using this same mess of a repetative tune! Thank you in advance, cheers!

[@counterpoint6718]

Then exercise free will and mute it - or is that too much effort on your behalf and/or bitching is your normal refrain?

[@M4CHINE69]

@@counterpoint6718 no want, wants to hear stupid music and I ain't muting my volume over stupid music

[@edmilsonambrosiodossantos9789]

I don't know if you noticed that it has an icon in the form of a speaker, if you click there the video will be muted, so you don't hurt your princess ears.

[@MicroMidas]

Just som friendly, constructive criticism.

[@Tassie-Devil]

The reason we don't mute is that some videos have a lot of crappy "no copyright" music... AND some important clarifying speaking in the middle or at the end. I am in favour of silence, or VERY soft classical music as background if you can't be f****d explaining anything or chatting to us as you go. Too many lazy idiots grab the first free-to-use crap-music, don't bother setting the sound levels, and put it on repeat. It's just not courteous to those who've taken the time to view YOUR video. Grrr.

[@ShaileshKhajanchi]

Can we use 12v charger instead of battery? Pl guide

[@LJensenRobert]

Good question... Do you know which type of 12V battery is the Safest and how many amps is to many, what's just right for cranking Amps battery to use? I had not thought of using a battery charger, very good question! I'm interested to see if anyone will give an answer to your question!

[@thaice6008]

We can use any double AA battery Or dose it have to be like the one u using in the video with the S on it N do it matter if it's old or new.? Thanks for sharing

[@kamilk]

Many of the AA batteries do not have solid "+" electrode. Wondering which manufacturers make them like the one in the video or is there any substitute for that.

[@1001_tech]

apakah aki nya ga tekor ?

[@SohailAhmad-by5wi]

Good project for emergency only. Because you decrease battery life.

[@NoCantsAllowed]

So, what is the collector of that battery made from and are ALL AA batteries made with the same material?

[@josephkurys1642]

Learned two things from this video, I knew you could weld with car batteries, but I didn’t know this, it is great to know and I’m going to try it and the music is simply relaxing, if anybody knows what it is please post, thank you

[@joelramirez4688]

Does the battery drain after a while??

[@6ixT3]

Yes but those are rechargeable

[@c2n10]

I wouldn't call it welding. More like fusing. There's no filler metal.

[@yeahproductions]

You can oxy weld with no filler

[@vicewize]

yeahproductions Yup sure can I’ve done it.

[@sapieearshad9105]

Spot welding is also fusing two pieces of metals.

[@stingerbold9327]

Directly Shorting a battery is a bad idea because it also decrease life spean and damaging internal cell plates so use a limiting component like a high wattage big resistor or dc to ac high frequency transformer

[@fidelcatsro6948]

at least paralleling a large capacitor helps ease the damage to the battery

[@davemwangi05]

@@fidelcatsro6948 That's not a direct short. I used to do this. The carbon he's holding has a relatively high resistance, probably .3 ohm Automotive starters can consume 100Amperes that's 1.2Kilowatts

[@fidelcatsro6948]

0.3ohm is not high resistance at all!! a bike starter motor has more resistance than that...about 1 or 2 ohms...the only reason starters dont destroy the battery is because all that shorting is put into heat and useful work to spin the engine....this is pure heat generating purpose and its more damaging

[@jirichladek7713]

Yea this american tech does not care about what he makes

[@davemwangi05]

@@fidelcatsro6948 In my case there, that's 40 Amperes. For your case that's 12 amperes max, I assure you that's not high. These beasts are designed to handle heavy drains for short periods of time. Deep cycle batteries on the other hand are designed for small currents but longer time and deep cycles. Just google whether an accumulator can provide 200 Amperes and you will see it's true. Heck even 400 Amps

[@Idkx2ummm]

You might not respond to this but can I use a car battery instead because I have so many of them?

[@nadinechajkowski9587]

fuck yes LOL I DON'T KNOW IF YOU HAVE A LOOK AT THE END

[@Idkx2ummm]

Lol

[@hermaizulzul625]

Bisa gak om ngelas alumunium..?? Trimk.

[@andersonbicalhodesouza3588]

Obrigado por compartilhar, parabéns.

[@anilchavan1902]

very nice video and easy way to make

[@markakamjg]

Wasting anything more than one second watching him wrap those wires individually is far beyond the limit of acceptable waisted seconds in my day... and why is everyone so sure it’s a “he” I work with my hands quite a bit and even after two weeks in Maui I don’t have a singer finger nail that looks as nice as the ones in this video.. But it could be said for a lot of videos on here dudes need to learn how to cut their fingernails if you’re going to be making a video that only shows your hands.. If not throw some nail polish on them things then you’ll really get some thumbs up and impress even more people.. then the winding of individual wires will be more of a mind blowing segment wondering “ how the hell did she not break a nail”

[@andrewphillips3879]

English please?

[@stonewolf7850]

😆Very salty, but funny and true.

[@stonewolf7850]

In essence, using the carbon core, from a AAA battery, attached by 6mm wire to the positive electrode of 12v battery, and croc clip attached by 6mm wire to negative of same, miniwelder is made. That saves some time.

[@tristantaus4556]

I don't even want to wonder what you do with your time. You look like you work with government

[@sulli1189]

The F*ck are you on about

[@joseph143_elvie]

Nice one, not expensive much no need to buy welding rod and electricity consumption. Save much.

[@krzysztof5087]

Funny - CAUTION. Avoid short circutit in the background :D.

[@user-ih1qs2cr3w]

@Lennox Houston lmao u guys are fake I have seen u every where

[@martingonzalez3328]

Felicitaciones.Muy buena soldadura ,que es una soldadura sin calor.Especial para arranque de carro y alternador.

[@autisticseacucumber4369]

title should be how to destroy your 12v battery.

[@garrygemmell5676]

How to make welding machine using only an "OLD" 12V Battery!!! Still a good idea for quick welds without building a transformer etc

[@GodSymmetry001]

haha ....how to replace your 12v battery, its so good .

[@odneyfernandez5596]

Nice one

[@f-s406]

How to use your battery warranty for simple welding?

[@ayebee1207]

Amurika tech has plenty videos of neophyte destruction. Have fire extinguisher close.

[@834sdav]

Can you even get any carbon/zinc batteries now days. Can you tell me where to get them?

[@Debraj1978]

I used to think, you are from india, but such batteries (cheapo made in china ones) are not available in India.

[@Andrew-w2p]

The channel name is American Tech

[@adityarai2470]

does it have to be a brand new cel or old cell will also work

[@anthony4312]

Your video is great except I need to watch with speed 2X

[@mapuiikhawlhring3602]

What battary you use

[@memyselfandi6422]

How many times in one's life will they ever need to weld two or more box cutter blades together ?

[@greydove361]

It's just an example, it shows that it can weld anything similar to that

[@akfoxfx9936]

Bro. Instead 12v battery is we can use 12v charger?

[@kennethasascastro5694]

this guy are crazy 12 volts charger seriously??!!

[@TechsScience]

I have tried with 230v Ac but it don't work

[@hariharan-me3tm]

230 volt is low current will not work

[@fidelcatsro6948]

you still alive?

[@davemwangi05]

You need higher voltage like 700volts to do this

[@davidmarek6141]

@@davemwangi05 Only high amps

[@davemwangi05]

@@davidmarek6141 Hi namesake.

[@littleraptor9898]

yes, and no. i see 1 person saying it in the comments, but i will give my own piece of advice: shorting a battery is not going to "kill it". when you short a battery you basically a resistor from the wire that you shorted it with. meaning, the battery will discharge itself. and discharging the battery under a certain voltage (10.2V) starts damaging it. but wont cause an explosion so calm down! that is also why we have 3 short circuit categories: 1. non-short: basically, just using the battery what it is meant to be used for 2. shortage: shorting the battery, but not draining more A than the battery rated A 3. FSC (full-short curciut) using the entire battery capacity. car starters are nearly an FSC..... so stop telling me, that every time you crank the car your battery wants to commit suicide. shorting, and FSC shorting a battery is not killing it, only rapidly discharging it, and THAT discharge is what kills the battery.

[@alekxsander]

Incrível, parabéns amigo!!!!

[@ricardopellin1403]

Sério que é só isso mesmo?meus projetos estão salvos!!!

[@masoodmohebzadeh4153]

Extremely risky to short a battery !! May explode. Same thing can be done with a high amp transformer.A few turns of a thick coated wire as the secondary winding of a transformer will give high current low voltage electricity required.

[@3dmixer552]

When you connect a bulb to the battery you do the same and does not cause any harm.

[@fixitdude9748]

@@3dmixer552its not the same higher current is drawn from battery to this. If it drains battery below 10.8v battery will lose a cell from damage. And will keep.losing cells the more.you drain. Thats if doesnt explode by then.

[@3dmixer552]

@@fixitdude9748 Well, obviously you have monitor the battery voltage but it is technically the same. You can drain the battery with a bulb as well if you don't monitor it.

[@juliocesarvelandia3386]

Si no lo hubiera visto, no lo hubiera creído. Un carboncillo y... 12 voltios ? Imagino que es para metales delgados. Buen video.

[@rajkumarsharma1537]

Kya ise Transformer Se Chala sakte hain

[@salvadorsaucedolopez2644]

As a warning alert, they got to write, do not attemp this at home 🤣🤣🤣🤣

[@Bigbopperairguns]

I have been looking for this video thanks 😊 what will a car battery do? Im trying to figure out how to get a striped bolt out of my cellender block, any idea because i dont thank i can hook up the negative to the very smail bolt to Weld a new head on top to get it to come out any ideas on that

[@kennethjanczak4900]

this is how you will destroy a battery for sure

[@karyaputrabangsapesawatyan105]

For welding aluminium?

[@reneofngol2398]

Yes it will work bro but the battery will be damaged

[@WasimKhan-kr4xm]

Issay karnay say battery kharab ho sakti hai na

[@justdejv2946]

10:00 it literelly says avoid short circuit

[@chickenmanatvtuft8283]

Lol

[@animeshpaik687]

Apka aa vdieo muja aacha laga

[@jamescunliffe9872]

Try inserting a pin Down the centre of the carbon rod and see if it works as filler rod?

[@mountainviews5025]

My friend switch the wires and your weld will be so much cleaner and will not glow so hot being dangerous to you but great little welding machine thumbs up my friends

[@pcjpcj4070]

Welded with car battery for years with welding rod out 4 wheeling in the woods. The carbon rod in here is just burning the metal.

[@bhupendradesai3402]

Carbon with plush wire ? Please reply

[@netbin]

not recommended disassembling batteries without gloves 🧤

[@djjunobravo7635]

Usually but not with carbon zinc or heavy duty batteries they are way safer