how to make Wet Dry Metal waste segregation project || Smart dustbin project using Arduino

[@skynet-robotics]

project kit at very low price www.skynetrobotics.in/products/dry-wet-and-metal-waste-segregator-components-kit

[@itz_azman11]

Bhai code bhej do yrr

[@digantapaul3793]

Great model! Works really fine and smooth. Also, the level of cooperation shown by them is truly exceptional,any doubt and they would clear it themselves on a call. All in all, the purchase was worth every single penny. Would definitely recommend you.

[@mohammadsmk8]

Those who are saying that code is not working, let me tell you everyone, if you follow the video properly, everything is perfect. This is the best channel on KZbin.. today I myself made this project. Code is working perfectly. The functioning of the whole setup is superb, and the outstanding thing is technical support. Sir responds quickly and solves the problem. In short, this is the perfect channel found on KZbin. I request you sir make more and more project videos so it will encourage us to be creative. Avinash sir.. love you🫡 Thank you, Sir❤☺️🥰

[@skynet-robotics]

Thanks for your appreciation, glad you liked it!

[@vsv264]

Can i use metal touch sensor on the place of proximity sensor

[@skynet-robotics]

@@vsv264 no

[@vsv264]

@skynet-robotics thanks

[@farhaayman2135]

can you please make an garbage segregation and monitoring if the three waste put together?

[@nishaamin3926]

Stepper Motor is just vibrating and servo motor works only at first when we connect the battery, what could be the problem? Does it need more power?

[@skynet-robotics]

Power issue Charge battery

[@nishaamin3926]

@skynet-robotics ok

[@AjayKumar-rg2tp]

Sir i have Arduino DIP so i can use it in place of Arduino SMD ....pls sir tell me

[@aleyshapapaya]

how do you ensure that the metal does not get sorted into dry waste with the usage of ir sensor and wet sensor?

[@skynet-robotics]

Proximity sensor is thr

[@aleyshapapaya]

@@skynet-robotics so the proximity sensor is to detect the metal, what is the ir sensor used for? thank you sir

[@zaydabdulla3907]

sir, what voltage does your proxi have? thanks

[@skynet-robotics]

5v

[@zaydabdulla3907]

@skynet-robotics sir, on the proxi, the LED are functioning but there's no signal that sensor detects metal? what could possibly the reason?

[@Rockyssimethy]

Can we connect the steeper motor from ardiuno with male jumpers

[@skynet-robotics]

Yes use any jumper but stepper Needs driver

[@Vasikaran-u9k]

The stepper motor and ir sensor is not sensing

[@Bosomtwegirlsstemhighschool]

Must you point the waste to the proximity sensor? Can't you adjust the working range to sense from far ?

[@skynet-robotics]

Yes you can use 10mm proximity sensor

[@zaimsyakir2995]

Sir, do you use NPN or PNP type for the proximity switch?

[@GTomonglay]

Sir? Can we replaced the battery into to solar panel??

[@skynet-robotics]

Yes

[@Aceverified]

While giving the code to arduiono , The file which you provided in link it says "File is already in existing" Any fixes?? Please reply sir please !!

[@KeepWatching-justlikethat]

Lovely idea 👌

[@skynet-robotics]

Thnx👍❤

[@ramareddym.j]

Stepper is not rotating with the ESP32 voltage. What do u suggest for that sir

[@skynet-robotics]

Use external power source 5-12

[@kambigmit3156]

Can we use the nema17 stepper motor for higher load. Sir please reply me

[@skynet-robotics]

Yes

[@marygraceriparip1120]

hello! about the shaft adaptor, is that required for the servo motor? are there other alternatives for this as it is not locally found within the Philippines?

[@skynet-robotics]

@@marygraceriparip1120shaft adaptor is not mandatory use any adjustments like BO motor wheel or coupling

[@ashwins1234]

Bro can we use carboard or some plastic pieces instead of the PVC because the shops are not accepting. They are not accepting the wood size also. Pls figure it out fast as in 2 weeks I am having academic fair

[@skynet-robotics]

Yes U can use any plastic containers

[@samipbaral5258]

Which software did you do your circuit program

[@JesusChrist8972]

Bro we can use soil moisture or rain sensor

[@skynet-robotics]

Use any

[@VarshikaV-dm5yh]

How will it know if the pink is metal or not ?

[@GamingWithArshDubey]

How to fix compiling problem Error returns code is not 0

[@Keshiliftin-i4o]

Raindrip sensor not working, i did exactly every step u did

[@VarshikaV-dm5yh]

Is proximity switch compulsory?

[@skynet-robotics]

Yes

[@arunagaikwad9991]

Sir,what code used for nema 17 with A4998 motor driver

[@skynet-robotics]

chepnamestepper library will be change

[@jasonl.8517]

sir. just asking can we just use the female pins on the board? and solder the 3 by 4 pins?. we're scared to break the board again

[@skynet-robotics]

Yes

[@jasonl.8517]

@skynet-robotics thank you sir

[@drei7154]

Sir, is there an alternative for stepper motor driver? And is shaft adaptor necessary?

[@skynet-robotics]

Shaft adaptor is connector only U can use any other alternative No alternative for stepper driver because stepper need it

[@drei7154]

@@skynet-robotics thanks for the response, sir! Is it okay if we don’t use alternative anymore? Or if it is really needed (im talking about shaft adaptor) what can you suggest?

[@drei7154]

Sir can arudiono se be the alternative for arduino uno?

[@ma.auroramadriaga4023]

​​@@drei7154 hello, we don't use the shaft adopter and we use a rubber band as an alternative and we put a cardboard underneath so we can glue it, hope it helps!

[@Vasikaran-u9k]

We can use any model for proximity sensor and steper motor

[@skynet-robotics]

Use any Stepper but use metal proximity sensor

[@JethroLei-tl6uz]

Can we use 9 Volts battery as a supply?

[@skynet-robotics]

Yes

[@gadgets_bulk]

Sir the ir sensors is sensing the pipe too what can we do

[@skynet-robotics]

Which sensor IR?

[@gadgets_bulk]

The one which is fitted above the rain drop sensor​@@skynet-robotics

[@gadgets_bulk]

​@@skynet-roboticscan the gap between the black and white light be the problem??

[@markgiomolano2801]

the only working sensor is IR and it detects everything. what is the possible problem?

[@skynet-robotics]

@@markgiomolano2801 reduce sensitivity of ir sensor

[@charlesangelol.ocampo9321]

sir i have a question. is it normal for the stepper motor to get warmer??

[@skynet-robotics]

Yes it's low cost stepper heats

[@aasthaaggarwal146]

Under-rated channel.

[@jasonl.8517]

What's the problem if our proximity is sensing the metal but didn't sort in the trash?

[@skynet-robotics]

Servo rotating? If a beep is coming from buzzer when u placing metal waste then arduino connection is ok If not then check code uploaded or not If yes then check stepper

[@Anshdeepsingh982]

Sir i live in punjab state in india will it be able to get delievered there?

[@skynet-robotics]

Yes

[@ma.auroramadriaga4023]

hello, the moisture sensor is not coordinating with the servo and stepper, can u simply tell what's wrong?

[@skynet-robotics]

Adjust Sensitivity of soil sensor by rotating potentiometer Or what's app me video

[@odutolakolawole9783]

I would love to get those kits of yours but I don’t know how easy your platform is to collect money from local currency like Nigeria 🇳🇬

[@skynet-robotics]

Sorry international shipping Not available You can order component from Amazon in u r county

[@odutolakolawole9783]

⁠@@skynet-robotics😢😢😢😢 Which country are you from? Ordering from Amazon isn’t that cheap compare to yours I am seeing here. Please 🙏 can you share with me a link for wholesale suppliers? Please 🙏 I need it very urgently and we can discuss business if you are down thanks 🙏 for your swift response 😊😊😊😊 Plus I will drop a message for you on your WhatsApp if you would reply me thanks 🙏

[@mugheesahmad596]

Hello..... I need help.... It's not working... The Arduino is just blinking "L" light..... And the servo making weird sound 😕 Please help me 🙏

[@Dominator9811]

Can we use this experiment in engineering

[@skynet-robotics]

Yes

[@nidra7896]

Whether mblock coding cn be done for this project?

[@puttaganeshvardhan]

Sir, can we trust the delivery? Is it guaranteed that we will receive it? It's important to us

[@skynet-robotics]

Of course You will get proper tracking details. You can message here if the parcel is not received.

[@itz_azman11]

Code and libraries ki link nahi hai bhai

[@aizenplays6809]

Hi sir why does the stepper motor don’t rotate when we try it

[@skynet-robotics]

Send video on WhatsApp

[@aizenplays6809]

@@skynet-robotics i dont have whatsapp sir i send you video on instagram

[@jasonl.8517]

Have u figured it out man?

[@KapilKumar-tz5dn]

Hello Can we use Ultrasonic sensor if proximity sensor not avelable.

[@skynet-robotics]

No

[@mamtadevi9545]

Rain drop sensor and stepper motor was not working please tell me the solution for my sciences exhibition

[@skynet-robotics]

Send photos and video on WhatsApp

[@mamtadevi9545]

Sir stepper motor driver me light glow Nahi kar rahi hai shayad isiliye stepper motor Kam Nahin kar rahi

[@mamtadevi9545]

Sir aap Ka WhatsApp number Nahi mil rahe

[@mamtadevi9545]

Mera 2 date ko regional level exhibition hai to please solution bataiye please

[@nouse-e2o]

Hello sir can u answer to me how we can use solar based energy usage or by using solar panel and use that as energy wastage Thank you

[@GTomonglay]

Sir do you have a procedure/methods of this, need lang sa among research.

[@SwaraaKulkarni]

5:22 diagram

[@TechnoAadvik]

Sir please give dimensions of the holes to be drilled (the distance between the holes) also do you give the pipes too ? (Pre assembled)

[@skynet-robotics]

If you want complete project you can message me 9075800409

[@akashgowda7013]

Proximity switch Np or Npn

[@aarushagnihotri1758]

Can we use Arduino R3 instead of Arduino SMD

[@Joycieeee-r3g]

i only have the classic arduino uno microcontroller and i don't have any additional pins can you give me a circuit diagram and code for the classic arduino?

[@lahari-19]

Bro wt type of sensor are used to detect the small rock

[@DươngPhanHoàng-x2p]

If the plastic bag is wet, the raindrop sensor will recognize the same and pour it together. Do you have a way to fix it?

[@skynet-robotics]

Ok let me think 😇

[@Lara_024-k3j]

I can't see where you put the shaft adaptor.

[@Vasikaran-u9k]

The both male and female connector give the same circuit?

[@skynet-robotics]

Yes

[@MaryGraceRiparip-v2z]

hello! what type of arduino uno is used? standard? economic?

[@radhika4816]

What if metal is wet??

[@drei7154]

Can arduino SE be the alternative for arduino uno?

[@jasonl.8517]

what seems to be the problem here sir? avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xfc

[@skynet-robotics]

Problem with Arduino Try to disconnect and reconnect Otherwise replace Arduino board

[@jasonl.8517]

​@@skynet-roboticsthanks sir

[@Joycieeee-r3g]

If i would use arduino nano could you please give me its circuit diagram and code pleaseeeeeee

[@skynet-robotics]

Same diagram

[@lovelyjeeva9858]

Helo sir I have one doubt In this three waste mixed and it have separately divided is it possible sir

[@skynet-robotics]

No

[@lovelyjeeva9858]

@@skynet-robotics I want like that project bro

[@Paula_-yb2yz]

Hi sir, can i have a schematic diagram of this project?

[@skynet-robotics]

Circuit diagram available

[@rinki2055]

Today is my order delivery date parcel has not arrived yet what should I do I have been waiting for 10 days. Now what should I do I have payment online to you

[@skynet-robotics]

Ideal Delivery time is 3-7 days It will deliver on time Maybe it's due to a festival rush and it will be delayed 1-2 days only . Kindly wait if parcel not received you will get complete refund.

[@kumareshk9140]

Servo motor rotating continouslly what to do??

[@skynet-robotics]

Use 180 degree

[@drei7154]

Sir, please reply. If we will use arduino SE, would it still work?

[@skynet-robotics]

Yes

[@sthuthinmathew7295]

Sir when i tried verifying rhe code it always shows error

[@skynet-robotics]

Add library

[@sthuthinmathew7295]

@@skynet-robotics sir I added the library

[@sehrishalikhan9150]

Can you deliver in UAE?

[@skynet-robotics]

No😊

[@Samjain123]

Is your arduno coded or we have to do coding?

[@skynet-robotics]

If you want code the I will send with coding

[@dazaiwai9041]

Can use NEMA17 for more load?

[@skynet-robotics]

Yes

[@shivalingbyali4987]

Sir can we make this as mini project for E and C engineering

[@skynet-robotics]

Yes 👍

[@Vasikaran-u9k]

The servo code shows error always?

[@Vasikaran-u9k]

Reply pls

[@skynet-robotics]

u need to delete all old servo library files from my document-->Arduino--> Library folder Download servo library from video description and add as shown in video

[@Vasikaran-u9k]

How to delete

[@Vasikaran-u9k]

@@skynet-robotics how to delete

[@Vasikaran-u9k]

Is shaft adaptor is neaseasery

[@skynet-robotics]

No u can do your adjustment

[@shimmerdixit6000]

yeh chalta alta hai yaa aise hii??

[@Leyzsus]

does this work without using any battery?

[@skynet-robotics]

5v Adaptor

[@kokilajayaprakash6960]

bro can you include LCD display please

[@skynet-robotics]

Yes

[@Vasikaran-u9k]

To which board we want to do

[@skynet-robotics]

Uno or nano

[@littlegenius5881]

Are your batteries charged properly or should we charge it.

[@skynet-robotics]

If possible charge it

[@suchitakarande7004]

Hello i want this project ...how to order

[@skynet-robotics]

www.skynetrobotics.in/products/dry-wet-and-metal-waste-segregator-ready-made-project

[@poojithaalekhya5675]

What if we keep all waste together

[@skynet-robotics]

@@poojithaalekhya5675 it's limitation of project

[@bestoftech699]

is this possible with arduino nano?

[@skynet-robotics]

Yes

[@Leyzsus]

@@skynet-robotics can u give me the circuit board setup? if possible

[@LizetteGray]

hi sir, can you please make an garbage segregation and monitoring with esp8266MOD and arduino mega.

[@LizetteGray]

please my final defense is on november.

[@shimmerdixit6000]

koi confirm karo ki yeh actually me samaan deliver karte hai ya thag lenge???

[@mayankvashisht1508]

Khud hi krlo

[@ritvijain55]

Can you share the code you have written in the video to make it work!!

[@skynet-robotics]

@@ritvijain55 code is given in the description

[@SLKINGGAMER-b1i]

Sir please reply in wet dry segrection machine video iam commented three time but not reply and their are too much problems because I have to submit it tomorrow evening🥺🥺🥺🥺❤❤i loved your all videos ❤❤

[@skynet-robotics]

Send me video on WhatsApp [phone]

[@ShamsulArefinBipul]

Hello.I am from Bangladesh,how can I purchase this project?

[@skynet-robotics]

Sorry, , can't ship to Bangladesh

[@sunilchoudhary2587]

How can we see our orders in google

[@skynet-robotics]

@@sunilchoudhary2587 once your order get shipped u will receive tracking details

[@shivarajpatil9005]

Can you make video on fire alarm system

[@saharshsinghvs6946]

How much will it cost to prepare the same?

[@skynet-robotics]

2-3

[@CreativeByte-tj4dp]

Please tell is your website safe i want to purchase

[@aizenplays6809]

is the code still working sir? and can we use this for our project please sir

[@skynet-robotics]

Definitely code is working

[@rajvlogs1034]

After successfully payment what will be the time period for delivery

[@skynet-robotics]

It takes 2-5 days

[@rajvlogs1034]

Why I am not getting any message from skynet robotics after successfully payment

[@LEOGAMER-cz4iu]

​@@rajvlogs1034bro did you got the product

[@puttaganeshvardhan]

@@rajvlogs1034 bro did u get the product,is it trustable

[@JazzRedHopeCada]

sir, can i buy your code, for pr2 purposes lang po

[@v_dgamin]

I have ordered waste secretion kit can i trust you

[@skynet-robotics]

Order I'd??

[@v_dgamin]

Order id 1284

[@tinkukemmasaram6165]

It will be good if cash on delivery option is added

[@skynet-robotics]

No COD option can't be open because students are always confused about project selection and cancel order at the time of receiving. It will make a big loss of the seller because delivery charges and return charges have to be paid by the seller . So no cash on delivery.

[@vishwajeetsingh1181]

Sir pls provide code for this project because if i made project and code not run then my whole hardwork and money gone waste 😊

[@skynet-robotics]

Code given in the description

[@SandeepPoudel-zc4mh]

can you provide a circuit diagram

[@DareGaming379]

can you deliver it in Pakistan?

[@skynet-robotics]

Sorry can't deliver