How to MAKE Your BMW Handbrake Work For Drifting

[@kristiansvilcans6850]

It’s cult x vans bmx grip😂 My friend had these😂

[@jamesburns7551]

Everyone that rides bmx drifts

[@kristiansvilcans6850]

@@jamesburns7551 yeah

[@aidenstockstill-terris4785]

I have those on my BMX rn

[@kristiansvilcans6850]

@@aidenstockstill-terris4785 nice

[@damyanovasen]

You dont need to remove all that to adjust the parking break. You just need to remove 1 lug nut and rotate the tire until you line the hole to the gear. Its all in the bmw e36 workshop manual.

[@eerohuikkala7747]

In every bmw

[@Eqwatherto]

at 30 years of age a bit of grease is generally needed to get them moving again, so removing them may be necessary, they were for me as mine were stuck from brake gunk.

[@desipranksterz7909]

hope you realize its a lot easier to do with the wheel off

[@plugpenguin1660]

no way i just finished adjusting it hoons way and i come inside and see this comment 🤦‍♂️ damn near stripped the bracket bolt getting it off

[@mihaiserbanescu8676]

I love the engine in the E36. Such sound, much reliability! Love it!

[@ale91oo]

I just can't wait for the E46 to be in the videos🔥

[@jorge-so9hf]

That cold start tho ! 🥶

[@stealthgang-pubgmobilegame8473]

That golf cart had some serious angle going on there. I’m seeing a drift cart coming soon👀

[@NWGarage]

Just want to say this is actually a REALLY high quality video !

[@SomethingRandomChannel]

That’s a much easier method than trying to flick that adjuster through a tiny hole with the drum still on thanks for this

[@arthurk1111]

Love your channel! Keep it up! Would love to see some a video about what angle kit you are running or what you did to get your angle etc. Thank you!!

[@luckydernoob5517]

This stuff is so relaxing to watch

[@jacobacheson4702]

We love guide videos!! Are drift tips and tricks next 🧐

[@kdk1470]

Loved the vid man! Keep it up

[@pubgyt1591]

Me:doing homework Yt:hoon garage post a new video Me:homework can wait

[@alexhuerta475]

I don’t even have a bmw but I love all your videos so it’s fine

[@KaapoWorld]

Hey man, love the video! If I had already adjusted the parking brake from the rotors when doing hats, can I skip that step and just do the attachment to the lever? Or would I need to readjust?

[@e36leo36]

those skids at the end were tight

[@joshefrags5471]

Nico you a blessing 🙏

[@kyhillbillys10]

I ordered a hydro handbrake but been getting use to the stock brake. I may just keep it and do the same setup as yours

[@yung_kuku]

i think the hydro is still a better option then this mod.

[@cloud9..]

Intro song: Chris Morrow - Crying over you

[@michiel5160]

What's the difference between adjusting cable tension at the handbrake lever and adjusting the calipers? My handbrake is pretty weak, I tightened the cable at the handbrake lever and then it was on all the time. So had to loosen it again.

[@MrRiof]

To adjust it you don't even need to take the caliper and disc off...you can adjust it through the wheel bolts holes with a screw driver. ....in case you dont know. but maybe you just wanted to show how it works and looks from the inside... :)

[@HoonGarage]

You would be correct, I just like to take it off to get a good feel of how close the brake shoes are to the rotor.

[@vuqarfaiq5034]

Oh man your videos are very short for me,man. Because your videos is very very nice man you can do it❤️

[@kenchimuyo2618]

smooth operator with the tire flip up lol

[@Paxe22]

That ending is hilarious

[@MrOZOLSS]

Btw you dont need to remve your rotor, just put a screwdriver in the bolt hole and adjust.

[@landuXD]

I think he did that to demonstrate how everything works and also its easier to spin the gear with the rotor off

[@MrOZOLSS]

@@landuXD yea, he did a great job, the comment was just to let everyone know that you dont actualy need to take the rotor off. Just a time saver.

[@casperholm78]

How do you get Your tires to LOCK when you pull Your ebrake with the stock settup.. i cant Seem to make mine lock up with brake shoes. I’ve seen people getting a second rear caliper But i dont wanna go that far. Whats the trick? Tight brake cable and shoes? I feel like i’ve tried everything

[@polmarrtinez]

what size is the pipe? I use a 25mm pipe and the the grip don’t fit well you use 23/22 mm?

[@blueflamingo3167]

I JUST POSTED A VIDEO ON HOW YOU CAN MAKE IT LOCK FOR WHEN YOU WANNA PARK IT

[@Chattsteezy]

Yoooo what block off plate do you have for where the radio was? Also, your setup is nice but Nerptech sells a similar setup for $50 and utilizes a drift button that threads onto the rod to prevent locking and you can still keep an emergency brake too.

[@HoonGarage]

A piece of cardboard that I cut and painted black😂

[@justasgestautas1411]

Hi ,what brand of hantbrake pads?

[@cre8tivegarage157]

Nice hand brake 🔥🔥

[@jimmystuck8969]

I always wondered why you never got poly windows from condor for the 36. They finally came out for the compact not too long ago and I picked up a set of two for 140$. Less than a single regulator lol

[@Troym99]

How does yours hold up in the rain? Any leaks?

[@tinapatterson3029]

What size peice of metal did you use for the handbrake brotha

[@sideshowjunkie]

Love these videos!

[@lamontauto]

Very informative video! Keep it up!

[@vuqarfaiq5034]

Yeah Tomas yeah😂🤦‍♂️👌door joke were very bad man🤦‍♂️😂

[@tooshabi5750]

Love ur vids bro keep up the good work. Try joining a tournament

[@smj6375]

I just set up my handbrake to lock yesterday, I've put new cables in and new shoes, I greased all of the metal parts for the shoes up, can't get it to lock up? Have I done anything wrong or do the shoes just need to bed in? It's improved the handbrake for sure.. but no locky locky😂

[@HoonGarage]

What handbrake shoes did you use? I’ve found the oem ones are a bit too hard of a compound to lock well. I’ve also found that the shoes need a good amount of cycles to lock more effectively. It doesn’t really lock well going straight only when turning or in drift. Also warm the shoes first by dragging the handbrake while moving.

[@smj6375]

@@HoonGarage thank you man, oem shoes

[@orochi2723]

the handbrake braking system can't support drifting in a long run and it'll break that's why hydraulic e breaks is advisable for drifting so you won't break your handbreaks

[@gapcityracing6086]

Autozones life time on pads

[@lukaspetrone3775]

Where was the first extended handle from??

[@hurpaderpp]

would this work on an e82? or do you know any options for e82 besides hydro?

[@smokeysony8390]

Do you have steering angle kit on this white car ?

[@daanixc]

does this work for the e46 m3?

[@Slowww_F30]

Would this work on a F30?🤔

[@jimmystuck8969]

Aye man wtf. You said brake shoes were gonna be 20$ at AZ and they were 26$. False info. This dood a fraud. Lmao all love/jokes g. Love the content

[@TeamGloriouZGB]

i have done the same but no locking on dry streets...

[@Carloss65]

When do you plan to continue the e46?

[@EyeDeeKay1]

How is the e46 coming along?

[@icyrecipe]

Hey man I’m hoping to make one just like your handle. Did you figure out a way to secure the hand brake if you park on a hill?

[@HoonGarage]

I just park the car in gear, it keeps the car locked

[@icyrecipe]

@@HoonGarage ok ok if I’m going to ask someone to bend the pipe to the same degree as you. What pipe did you use, did they supply it?

[@zenki19]

bro excuse me, if a hill is too much bias does car rolling on a gear?

[@sfafsashfdh6589]

music from intro?

[@aiden8530]

where my early gang at

[@zacisntcool]

goat

[@gibrantmartinez]

Tesla cold start 🤌 perfecto

[@deviousg80]

Where’s the e46 videos at

[@polmarrtinez]

Abs off? Or still on

[@liamwoolven5147]

how do you stop if the hand brake dont stay up

[@BillyTheSKID]

You leave the car in gear when stopped

[@Sammy-zj6oj]

so how do u park it without it rolling??

[@HoonGarage]

Always park in gear

[@jerminsanchez3274]

Is your bmw stock ?

[@kasraogabian9122]

Nice bmw

[@michaelrupp8603]

hey how many horsepower is this engine

[@HoonGarage]

Like 180 crank

[@4mz]

You are nice bro

[@kampis13]

Did you know you can adjust that handbrake by just removing one lug nut? Even can leave the wheel on.

[@Hennysgarage]

I can testify to this. It’s just way harder to stick a screwdriver in there and turn it. Def a time saver though.

[@zeesh_2310]

Where’s the e46?

[@Daniel-mq8eh]

Noti😈

[@HoonGarage]

Gang gang👊🏼

[@kamroon]

The gear is adjustable thru the lug bolt hole. And 3 months is terrible longevity for a brake shoe. Three years is more legit.

[@tooshabi5750]

😍😍😍😍😍

[@akbarits8585]

boat

[@maniosif3986]

bro,your face to 12:21 ....

[@massvlogs5899]

I bet you BMW owners sit on them too

[@massvlogs5899]

Damn my car literally shit itself

[@AlexandrosPextis]

Bro, Bmw is Rwd so you don't need handbrake for drifting-

[@Adi77]

Tell me that you know nothing about drifting with out telling me that you know nothing about drifting

[@AlexandrosPextis]

@@Adi77 bro, with my bmw 320i i can drift without handbrake..

[@vxruzdanz]

but then how do u park it, like how do u make it not roll when the car is turned off?

[@tannerlister4106]

goat