How to Install a Hydro Ebrake (Hydraulic E brake)

Hydro E brake installation. Learn how to install a Hydro ebrake in your drift car. I show how to build a completely bolt in hydro mount that doesn’t require cutting the interior. I also show how to run brake lines and bleed the brakes so there is no air in the lines. Then we go out for a ride and test it out to see if it locks up the rear wheels!
Tools and Products I used:
Hydraulic Ebrake: goo.gl/d5mPQb
Stainless Steel Brake Hose: amzn.to/2oVbkzq
Brake T-adapter: amzn.to/2ULlWTr
-3AN to Caliper fitting: amzn.to/2o91Mnm
Vacuum Fluid Extractor: amzn.to/2pJ26GI
Cobalt Drill Bits: amzn.to/2o8WEzJ
Metal Cutting Saw: amzn.to/2oVg2gy
Rubber Hose Clamps: amzn.to/2o9aOAL
Metal Center Punch: amzn.to/2oGWknn
Dual Caliper video: • How to Install Dual Br...
Make your own brake bleeder: • How to Make a One Pers...
→ Become a ChrisFix Subscriber: kzbin.info_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

[@chrisfix]

Spoiler Alert! Since I have gotten a ton of questions on why I didnt run the brake line under the carpet, well... That is because I will be gutting the interior for the weld in roll cage, then painting the interior so it looks amazing!

[@lewisg3958]

ChrisFix yes your gutting it it going to look so good 🚘🚘

[@thedennisshow2967]

ChrisFix YAY!

[@esmeraldaromo-huerta178]

ChrisFix can you do a valve adjustment video for us??

[@DenverJohnBradley]

OH YES! I was just thinking about this!

[@sansvevo1059]

Are you going to be uploading a video today?

[@theapplianceguru]

Looks like my moms mini van is getting a hydro e-brake

[@demobee5564]

Lol

[@yoyisalazar1454]

all cars and vans can drift just depends on the driver if your willing to go towrds tat level

[@m.zohaibusman1298]

@Maggie and Eric woooosh

[@saabwitha2.3turbo81]

The Appliance Guru Drift Van

[@dnzgarage]

Ive done Burnout, drifted donuts with pedal ebrake and drag raced my parents Dodge Caravan... anything is possible

[@jpillagames9207]

anyone just watch his videos for entertainment??

[@AnytimeDoMore]

JPILLA GAMES me

[@kuwarbirshergill6758]

JPILLA GAMES yup, his videos are the most entertaining

[@kuwarbirshergill6758]

educational too

[@danielmuro5843]

JPILLA GAMES what else are we watching it for? Oh wait, to actually do it one day.

[@sippe3985]

i don't think 2 mil people are gonna install a e brake now

[@tristontaylor1593]

I love how well thought out everything is. No shortcuts, no loose ends. Just solid mods.

[@chrisfix]

Thanks a lot!

[@tylerwoods9445]

Mikeymagz get liability insurance on an older car, I’m 20 and found insurance on a Miata for 30 a month

[@codigoproyectorenexis7300]

it is real easy to follow what hes doing cuz he doesnt stutter or anything and explains it is perfectly

[@snowoffstream5823]

these don't even feel solid, wtf

[@joker-qg1pb]

@@snowoffstream5823 what are you talking about mate

[@someearthbeaner619]

14:33 so we just gonna ignore how clean that transition was 👀?

[@simp-gum1801]

Fax

[@shingfu4319]

Mr clean🗿

[@sights00]

bruh i guess im not the only hoi thought that but GODDAMN THAT WAS CLEAN

[@Emmanuel_60200nine]

It was clean

[@glxck19]

That was something... 0_0.

[@Jayztwocents]

Thank god Chris is pulling up the slack for all the other half assed car youtube channels! When Chris does something, you know it will be done to the proper standard!

[@chrisfix]

+JayzTwoCents thanks a lot man! I really appreciate it!

[@sandromartins20]

The same about your tech vids! Both awesome channels and personalities!

[@julienfoss1392]

you know jay isnt in a tech channels comment section because he only has 13 likes lol

[@23elbo]

yeah jayz when is nismo getting some update video's?

[@James-wl4wi]

JayzTwoCents man I didn't expect you to be here

[@chappal38]

This guy takes pride in his work. It's always a pleasure to watch his no-nonsense, no techno background music playing DIY videos.

[@chrisfix]

+Mohammad Danishmund thanks a lot man! I'm glad you're enjoying the videos!

[@ericsavoy5186]

ChrisFix can I ask you a question

[@ericsavoy5186]

ChrisFix do you know how to replace a the front ball joint on a 02 Doge ram 1500

[@ericsavoy5186]

because on my mom's ram it's broken

[@chrisfix]

+Eric Savoy here you go: kzbin.info/www/bejne/kKvXk3SJndOfrtk

[@chessclub6748]

I love how chris is so aware of the fact that his viewers sometimes start with nearly 0 knowledge of some of these things. the fact that you told us how to do corners when grinding metal is just showing how much he knows how we are just normal people.

[@kyledwarika4866]

True

[@albertosoto8708]

"Yes officer, it's all stock".

[@ikammann9551]

Officer would believe it too

[@adrianrendon2162]

"when i bought it"😂

[@exon7352]

"ok"

[@bishopm4401]

@@dave8615 some areas don’t allow much modification so you gotta do it on the down low

[@janduaneabong3809]

"Proceeds to gap a dodge demon redeye with 10 bus lengths"

[@TheJohnnyStones]

I will never install a hydraulic E-brake in my car. But I will watch this whole video

[@tyroneplayitsafewoodley747]

Bot One - Exactly! Sometimes its not about doing what he does but rather it is entertainment.

[@HappyfoxBiz]

teaches us about hydraulics though which is what every home mechanic should know

[@TheJohnnyStones]

The way he teaches, going over every detail and problems you might have running into YOUR own car, because not everyone owns a mustang or whatever car he's working on. I just like that he covers everything and then some. Most KZbin channels only skim over details and only do things for that car and only that car, but ChrisFix will say "I might be different and here's the most common examples of them. I love it. Best KZbinr on here

[@dankbreadpizzanose8135]

+Эллина Ковалёва. really your putting those links here

[@moniiiiiiiiii]

RalBear but im doing the dual caliper for more braking power

[@hugovasquez9803]

My God Chris, you have a gift for transition editing

[@chrisfix]

Thanks man!

[@megadestroyer454]

Putting the cup holder back was absolutely sick. Absolute perfect attention to detail.

[@dinlvaj]

Simps: egirl Chads: ebrake

[@wavykhan7735]

🤣

[@honestkitty4568]

😂

[@luma8212]

🤣

[@sa1m_o726]

Fax 😂

[@Exlipse703]

🤣

[@Vitela]

when Chrisfix says "GOOD" it gets me all tingly inside 😝

[@tamzidzuha4333]

Alberto V lol ikr

[@sadmageboi472]

i get it when he says "wooder"

[@hatchkosgarage3896]

Alberto V same lol

[@ronnylp1450]

Alberto V me too 😍

[@israelcruz3654]

no homo

[@oneway_dimas1529]

Is it just me or does Chris fix make everything look so easy😂

[@beckettparker1667]

completely agree

[@NomadDepths]

Yess! Ive been running around the house telling everybody im a professional amateur because i watch chris fix

[@haydenbarrera8801]

Why did I watch this, I dont even have a car....

[@_LEGENDARY_EURY_]

CHRIS as a lifetime carguy I must say watching these videos since that time you had only 1 million subscribers and watching you grow close to 10 million subscribers has been EPIC ... I like the way you put a lot of work into these videos and it really makes a difference ......CONGRATS on the GOOD WORK DONE , WHAT A W!

[@jdvdcars1943]

Best mechanic on KZbin

[@kamilb3532]

Who else watched this whole video all though you don't even own a car 😂

[@melvinthegoof5861]

me

[@randomshtuf1640]

Me

[@melvinthegoof5861]

Hi

[@melvinthegoof5861]

@@randomshtuf1640 p

[@randomshtuf1640]

@@melvinthegoof5861 p?

[@Unoxfan2000]

DO i have a car?: No Am i 18 yet?: No Does this give any usable info for me?: No Do i find this VERY interesting?: HELL YES!

[@derpy9800]

"Chris removes cup holders for e-brake" Me: an everlasting exchange, a soul for a soul

[@permabased1775]

when i get a notification from ChrisFix, it instantly adds 5hp to my prius

[@brandondannys-menary3678]

4 skin wow! You must have a whopping 80hp by now! Lol

[@chrisfix]

lol

[@thenhraguy4935]

YOUR CHEVY VOLT !!!!!!!!!

[@jacksandral8889]

4 skin congratulations your prius now has 11 horsepower!

[@atarvhegde5210]

Well , when Chris supercharges the 'stang, then Jeff Shauls Prius will automatically get a supercharger

[@fox9054]

14:34 might have been the coolest transition I've ever seen

[@FungiSoup]

It scared me lmao

[@Altered-Stigma]

I liked that one as well. Though, I personally prefer the transition at 1:59.

[@denzyplayz1266]

I love how this guy shows everyone how to do it instead of just recording it and bragging about how he did it. Thank you ChrisFix.

[@cuberyllium]

This one, the kill switch, and Chris’ dream Hummer are my favorite videos

[@chasedemulling9479]

This guy definitely deserves the most subscribers on youtube, he does things that can actually help you

[@chrisfix]

Thanks a lot!

[@kitty_catYT7201]

@@chrisfix hi

[@techandtech1]

I agree

[@fightbackfakenews]

@@chrisfix dam Chris I have been watching u for what feels like over a decade. I haven't watched u in the last 2 years thou. And man to see how many views and subs u have . It's so awesome to see brother. Keep grinding brother

[@fightbackfakenews]

@@chrisfix Chris when are u ganna make a hydrogen fitting for a engine to show these people gas isn't needed lol.

[@Nat0ri0us]

Honestly I don't ever do any of these things, I just like watching you work on your projects and seeing them come together

[@lulu-zb3qt]

same

[@offroadz4861]

I'm 12 so I have a excuse

[@joshuabasa5710]

@@offroadz4861 im 13 but im plannin to work on cars and learning stuff early

[@offroadz4861]

Joshua Basa same, going to do a rebuild on my dirt bike (my profile) because it doesn't run

[@operatingsauce]

I feel like the insanely tight camera angles chris does sometimes go underappreciated, like the shot of the brake line under the wheel well. That's some top tier camera work!

[@Idiot_in_a_truck]

I've learned soo much more from Chris than other standard KZbin channels. Thank you ChrisFix for making content that's simple, in depth, and in detail.

[@makurossuuu]

Chris u should reduce the weight of your car. Do a weight reduction video

[@jeremym9140]

Macthememe he's not a fucking ricer

[@jeremym9140]

Macthememe because weight does almost nothing to a car, most of all in America because half of the people in America need to do a weight loss on them self. it makes the car ugly and you loose like 30 pounds and 30 pounds isn't going to hurt you that much

[@jeremym9140]

you act like a mustang is a suv and has a ton if weight in it lol

[@jeremym9140]

and I drive so I don't think im 14

[@gamerjpn2629]

JeremyM Since when is weight reduction a ricer thing?

[@Ryan-uw1hw]

I see a Chris Fix upload, I like it.

[@luchvk]

This could be weird but I have to ask. That logo looks familiar to me. Do you play Rocket League? I've seen that same or a very similar logo before. I've even traded with someone who had it.

[@YehNahYehAyy]

Done an image search and it came up with "Raze Clan"... So... yeh that.

[@chrisfix]

Thanks for the support man!

[@JoeYen-nh7ru]

I love that Chris fix always uses the thread locker in every single video

[@makokimoto4132]

I love how Chris acknowledges that not everyone has exotic tools, some car repair videos are like how to fix a rust spot on your car at home "first get out your $50,000 welder and then put your car up on your custom car lift. Thank you Chris.

[@yooperboya9475]

Me "I'm tired I should go to bed" Phone "chrisfix posted a video" Me "nevermind"

[@vq_tyler3974]

James Fortin Jr. SAME

[@chrisfix]

My subscribers are AWESOME! That's all I gotta say about this.

[@cookiesncream3265]

James Fortin Jr. Just happend to me :-P

[@showtimeshine9861]

Literally me everytime Chris or Cletus McFarland post a video😂😂😂

[@Gameking30578]

Chris, this was by far my favorite video you have ever made. Looking forward to the racing seats and everything else you have planned. Keep up the good work!

[@chrisfix]

Thanks a lot! This was one heck of a video to produce! It is by far the longest video I have done!

[@2Skillz4You]

Will you be adding a turbo to your car ? or do a turbo installation tutorial ?

[@Gameking30578]

Sorry bro, I don't make videos

[@andy4907]

"Installation is the opposite of taking it apart"- chris fix words of wisdom lol

[@Shine-yx8hj]

when youre just an ordinary guy and dont even have a car but still watch this cuz of your love for cars🤙❤️

[@chrisfix]

I'm glad you're still watching the videos!

[@progeammerboy6346]

is it mandatory to have rwd car for hydro ebreak

[@sorenmortimer4246]

@@progeammerboy6346 it’s recommended but probably not needed. If you have an AWD it probably would be the same process. I bet even with FWD you could do it probably isn’t the best option.

[@sa1m_o726]

Same😂I only need to wait 4 years so I can drive

[@ppbob]

@@sa1m_o726 lmao same

[@TheSqoou]

17:52 "Installation is the opposite of taking it apart." ChrisFix -2017

[@jacobwhite953]

The Sqoou Yeah, that should just be common sense. But, people nowadays don't even know how to change their damn oil.😂😂😂😂😂😂

[@chrisfix]

#Truth

[@blakepoingdestre9300]

The Sqoou w

[@TheSqoou]

Jacob White For now, we can call it uncommon sense !!!

[@TheSqoou]

ChrisFix Thanks for doing these. I wondered about your three foot sections choice on this one. It looks a bit tight from this end. I fear two overweight passengers and a good bump could pull one from it's threads. It got me wondering if they have to be symmetrical to function. Would a three foot and a four foot section work the same or would one side be stronger ¿

[@SK33XY_MZ]

Your mustang should be called christang

[@PoonamSingh-yc6ec]

Oh that is a good idea

[@blood4g924]

This video is almost 3yrs old and ChrisFix still looks at the comments and likes them. Best youtuber EVER.

[@lawandamin3076]

It’s 2 years old and not really nearly 3 yrs old

[@randomdokutah2683]

Must-drift 😂😂

[@sovietscrapmechanic5058]

DrifterBeast is what it should be called

[@ruinfox4108]

i love that even today Chris still comes and reads the comments on this video, you can tell cause he hearts comments that are a few years after the video came out, so awesome!

[@CgProductions11]

I love how Chris is still liking and replying to comments on videos from 3 years ago

[@brandonweese3279]

Hi. All of your videos have helped me fix a car that hasn't ran for a decade.

[@DJzMax]

Brandon Weese that's cool what car is it?

[@iustin_dssq8169]

Brandon Weese you got that cold start right ? maan amazing

[@sharifsircar]

Before and after picture please? Those are just awesome to admire

[@brandonweese3279]

I can't remember what year the previous owner said it was but it is an f250 truck and it sounds like it has a duramax Cumns engine with two turbos but all it is a rebuilt v8

[@shamyraustin765]

Chris, love your videos! You inspired me and my 7 year old to get a project car to work on. Are you planning to ever complete a video on how to fix/replace the e-brake?

[@chrisfix]

I'm glad you love the videos and they inspired you to get a project car! I'll have a video out on that soon!

[@kitty_catYT7201]

@@chrisfix hi

[@idabomb00]

Very clean install. You should be proud, your workmanship is a rare skill these days.

[@bobanovits1936]

That transition at 14:34 is lit

[@chrisfix]

Thanks a lot!

[@Djentfan420]

Big Balls no

[@Rikitiki00]

CringeyfurrysRlit yes*

[@802Garage]

I like 11:18 and 14:20. I think there was another with the brake lever, but I can't find it.

[@bawshawg01]

+1! This vid was full of them man!

[@AngelLopex300]

I don't even have a car but I still watch his videos

[@ErraticHail]

DutyKing-02 same

[@jmorley3254]

DutyKing-02 same

[@fernandomb1486]

DutyKing-02 same

[@michigo9298]

Me too dude

[@andresalvarado3923]

Same hahahha

[@polishjerry5474]

Super clean build Chris. As always, you never disappoint.

[@brawler6216]

Been watching a lot of your videos while working on my 2006 Chrysler Sebring Touring, it's my first car ever and my first project car as I've replaced all 4 control arms and ball joints, the sway bar links, the right mirror glass. And I'm still working on replacing the FR headlamp assembly, a front pipe exhaust leak, and some RR fender rust that needs to be removed and the body filled.

[@huntin_for_life_1212]

That camera trick was cool with the paint

[@chrisfix]

Thanks!

[@thatrandomprotato]

Hey Chris fix? Did you actually spray paint the camera

[@neethru.2661]

@@thatrandomprotato there is a glass/plastic there i think xd

[@sritanaiballem6886]

EmP. Yes there is a piece of glass in front of the lens.

[@johnjosephdejesus8524]

Imagine chris forgot the glass infront of the lens

[@luclaan8165]

I bet at least 30% of people that watch this video don't even have a car bit just watch for fun

[@chrisfix]

+Luc Laan as long as they learn something, get motivated, or just enjoy the video, that's fine by me!

[@luclaan8165]

ChrisFix I also dont have a car and I have watched almost all of tour videos

[@anonymousmind]

Luc Laan you don't need to own a car. Once they do get a car they will enjoy modifying it with ease due to the knowledge they have gained.

[@dennyrachmansyah8183]

well i haven't got a car yet but this kind of video is really interesting! you don't need a car to learn, right?

[@RzVids]

More like 80%

[@dennismora08]

I used to watch your channel as a kid for fun. Had no clue what I was watching but had a blast watching you install stuff and drift

[@nm-pl6ys]

This guy makes working on a car seem so easy

[@heatvisionvr]

14:35,transition got me good

[@elijahlawrence8151]

Bruh I wanna see Chris fix build a car from scratch I think he can pull it off

[@bmwe3487]

He did?

[@nperm8789]

@@bmwe3487 ???

[@Boypogikami132]

Lol

[@bookle5829]

The closest think you'll find that on KZbin is building an entire rc car. JohnnyQ90 made a series on that.

[@windowstips1430]

@@bookle5829 there's a guy who is building a GT40 replica from scratch, but he's french

[@josesaldivar9344]

chris is a supreme explainer, always making sure people comprehend what he is doing

[@SC-kd5ln]

chris your voice is so sweet, also these tutorials are awesome, i wanted a hydro for so long and i got it and did not know how to put it in. i watched this video and i understood it properly

[@SizarDuski]

8 months ago already? Time's flying man. Btw I'm still watching this video. I can't stop..

[@chrisfix]

Thanks a lot man!

[@marshallfox1786]

Sector I like watching a few videos a day. They are very informative and relaxing to me, plus I like learning something new. Chris is awesome!

[@rickshanchez8229]

13 monunts

[@xbustaxxroundsx2414]

I feel you

[@AlexKilinuwu]

AutoKurd 10 months ago? Times flying man

[@farisk4899]

It's sooo satisfying watching the driftstang progress

[@chrisfix]

Thanks Faris!

[@DailyHype]

Faris K ikr!

[@jonathanvlog6506]

Faris K my new egda mustang gt would be there soon 😉

[@user-qf3iw1gc2y]

Great job. I really appreciate it. As you mentioned you want your work to look perfect, you could do the same thing for cup holder to the oil tube to hide it under the carpet after you checked that there's no leaks from any joint. In general it's well explained and achieved excellent results... Well done

[@hyporex2510]

Can we just appreciate that Chris' transitions are way better than Hollywood

[@andyrodriguez1326]

Dude you don't even know how impatiently we have been waiting for this! And I think I speak for us all.😃

[@oldassaccount9034]

Dragon Ball fan totally bro

[@lescarneiro]

For sure man! Was very happy when the video notification popped over my email!

[@chrisfix]

Thanks for the support! You have no clue how hard I was working on this video!!! haha

[@Inodem_]

Guess im putting an E brake on my Trabant.

[@BigBossKollegah08]

would like to see how u drift ur Trabant :D

[@Lucas-tr9hh]

Isn’t a Trabant fwd?

[@BigBossKollegah08]

@@Lucas-tr9hh yes 😂

[@Lucas-tr9hh]

@Wossi *COMMUNISM*

[@andra_syawwal]

@@yeetchurros3060 malaysia

[@kayrams1792]

This guy excellently consistent, friendly and professional.

[@jonathanribbing8627]

im not watchin this to learn how to do things, im watching this to see your improvements and career. AMAZING!

[@Gipp7_0923]

Hey my dog is named grommet don't you poke a hole in him

[@chrisfix]

haha

[@ThePolerbearproducts]

Ok Wallace

[@chronictraingaurd1717]

Thats the best name ever grommet is from wallis and grommet but its actually perfect

[@SubTheScribeYT]

Lol

[@defalt45]

wat

[@naveen5126]

11:03 that wiggle pun tho....

[@CyberKnightX21]

"installation is the opposite of taking it apart." Best advice I've gotten in a while.😂

[@CMplays16]

It's been 6 years and it's still amazing to watch

[@tjaycappalot7920]

11:04. Wiggle wiggle wiggle whistle lol 😂

[@geicoman5]

I just now caught that... lol

[@angel-ftw]

Lolololololololol😂😂😂😂😂😂😂😂😂😂

[@joshuabasa5710]

11:04*

[@aidenc6277]

11:04

[@noakbredin4499]

I love the thing with the cupholder

[@chrisfix]

Thanks! It was a really nice touch I wanted to include!

[@sotirisl.6561]

ChrisFix 17:47:I know this feeling!!!!Greetings from Greece!

[@borginator1493]

Yeah something that most people would've never done. I love how he puts that extra touch and goes the extra distance for things and it pays off every time.

[@noakbredin4499]

SpaceDude _ yeah exactly what i meant:)

[@niq872]

yea really looks nice

[@jackl3384]

The wiggle wiggle bit was funny😂 I love your videos I have used some of them for help on my car but I just enjoy watching you vedios

[@chrisfix]

I'm glad you like the videos and have used some of them!

[@roachdawggjr9557]

Chris I really love your channel❤️ you make everything so simple🙏

[@MrBaconstrips13]

Man I just love the passion you put into everything, especially with little details like the cup holder, you should be really proud of the work you do and the content you produce :)

[@briangonzalez6025]

GoodToMyself.

[@DazTheMe]

24:26 REV UP YOURRRR ENGINEESSSSS ITS THE SCOTTY KILMER CHANNEL

[@ezrakainz]

DazTheMe that's what I thought...

[@chrisfix]

+DazTheMe haha I was thinking of pulling a scotty

[@Samy-hh1wn]

OMG hahahahahaah I hate him

[@thedalailama245]

The Dark Knight lol come on why hate

[@denissheahan1070]

DazTheMe that cracked me up!!

[@ricksgarage8069]

Chris, You are an excellent mechanic and give a great presentation.

[@JonTheGeek]

The commitment to the stock look is lovely.

[@spongejacobw123]

b-but now you dont have a cup holder.... where are you going to hold your coffee...

[@DanielGyimesi]

Not a Cat you answered your own question: he is gonna 'hold it'. Otherwise, there is space in the door.

[@j.cun777]

or cup of water

[@spongejacobw123]

DEJA VU!!!!!!

[@spongejacobw123]

DEJA VU!!!!!!

[@spongejacobw123]

DEJA VU!!!!!!

[@Kaelan514]

yesss! who else watches him JUST for entertainment? watched the whole video and man this was good!

[@chrisfix]

Thanks a lot!!!

[@ppbob]

I keep coming back to this video because I just feel like it’s one of the most iconic parts of the driftstang 🤘

[@Rtcmanga_YouTube_Channel]

Wow, that is the cleanest hydro install I have seen so far... looks almost like from the factory... :D

[@chrisfix]

Thanks a lot!

[@dave8615]

Cant see your picture profile

[@brentfabian174]

the problem, is now you can't enjoy the cool, refreshing taste of pepsi.

[@oldassaccount9034]

Brent Fabian lmai

[@danielbel67]

Brent Fabian 🅱 e p i s

[@chrisfix]

#driftcarproblems... haha

[@spraynub]

air vent cup holders though???

[@imnota]

Drink coca cola,pepsi is shit.

[@CoverCatz]

Chris I noticed that you are going to get racing seats. Our company recovers seats. So I am not asking to recover your mustang seats, but I have a older customer who's dog suffers from separation anxiety and chewed holes into both passenger and driver seats. He is on a fixed income and my heart went out to his cause. I went down to junk yards and most of the wanted like 25.00 per seat but all the one I looked at were riddled with mold or black mold and I don't want to risk getting the elderly sick. I guess what I am asking is would you donated those seats so I get this old fella back on the road?

[@demonhog922]

Yo, Chris, I back this

[@dudeonlygamingandotherstuf7791]

+ChrisFix

[@xgamer2011]

yes chris

[@vermili0138]

Please make it happen, Chris.

[@ThatTeaBagger]

COVERCATZ Auto Trim Upholstery +ChrisFix

[@denzyplayz1266]

That fill at almost the end of the video in to the hydro brake was COMPLETE PERFECTION bro

[@chrisfix]

It was pretty cool!

[@purgatorysplayground7501]

Really appreciate the video. So hyped to get my hydro put in after I get my car back from a tune up

[@makurossuuu]

Finally chris ive been waiting for this for 3 months

[@TheMightySheep1]

Macthememe was it worth the wait?

[@makurossuuu]

TheMightySheep1 i guess so

[@limited9024]

you have given me so much inspiration. I would die to make a 240sx into a drift car. So many ideas. Been here since 14 💕

[@chrisfix]

+Live, Ride, Die awesome!

[@user-mq5tq2fq2l]

همه مکالمات قبل حذف شو ر

[@manlikeilyas]

ChrisFix lol

[@krislizana2017]

Limited BmX how old now? 15?

[@R.I.L.E.Y..]

Hey Chris I started watching when you started this series and I love how its still going and if the series does end I will never forget about it

[@chrisfix]

It's a project car! The series will never end :p

[@R.I.L.E.Y..]

@@chrisfix yay

[@atarvhegde5210]

@@R.I.L.E.Y.. The series only ends when , Chris sells the car

[@ispik6087]

I have been watching you for about a week and with the things I learned from you I think I can build my own car

[@Roysopinion81]

please make a tutorial on how you make a sandwich 👍✌

[@hemipower3308]

Milton Ranger Walker will save you.

[@chrisfix]

+Milton hahaha

[@oldassaccount9034]

ChrisFix but legit tho i don't know how to do it...

[@tamzidzuha4333]

Milton go watch how to basic then

[@nooberNXC]

Instead of mayo he will use loctite

[@MrGorizRepz]

Why not just run the line under the carpet for a even cleaner look?

[@juliandrennan4115]

MrGorizRepz Yeah, I thought the same. It's would look much better

[@CM-tf4so]

MrGorizRepz he will eventually rip out the carpet I'd

[@dphorgan]

Or even better, route it trough the transmission/driveline tunnel?

[@pauldowding8185]

That's what I was thinking.

[@chrisfix]

The carpet is getting removed for the roll cage ;)

[@jordonbrewer2354]

"Installation is the exact opposite of taking it apart." Probably the best quote I've ever heard

[@zeuscameron5185]

No cap you got the coolest transitions, it’s so creative

[@kunjpatel9800]

I can't even drive and I love these vids

[@fernandomb1486]

kunj patel same

[@ryken03]

kunj patel dude same

[@airplanegobrr]

kunj patel same

[@zoom_shields]

kunj patel me too!!

[@martinpreciado3585]

Chris was really concerned about whether or not people would watch the whole video! Not one time during the video did I want to stop watching! Such a quality and an informative video man. Can't wait to see the drift stang being built gradually! Hoping to see you get some seat time at the track soon bro. 👊🏼

[@chrisfix]

+Martin Preciado thanks a lot Martin! That means a lot!!!

[@daniel-bs5mv]

hey man, i’ve been watching your videos for god knows how long, and i just bought a car, this is the first thing i’m planning on doing, thank you for starting youtube, even though you were planning on being a marine biologist. you’re the best!

[@ryanheerdt7928]

All jokes aside.. well done on the install, not only did you explain everything thoroughly, you made it an easy step by step guide for anyone that really wanted to do this.. ALSO you didn't HAVE to go that far. You could of just hooked it up quick, throw away the cup holder, and all plastic parts and be done.. but you may friend, Installed it correctly, and perfectly. You did it how it's supposed to be done and not "ghetto rigged.." I give you a 10/10 and I'm a new subscriber 🥹

[@lonely101100]

Waiting for the engine bay cleaning professionally

[@lonely101100]

Maybe the corvette engine

[@red58fury]

that would make a awesome video!

[@austinstrawderman2286]

It would be awesome to work on a car with him. I've taken so many notes on this. Thank you so much man.

[@chrisfix]

Glad you are learning a lot! Thanks man!

[@joseangelgarcia7814]

Dude you should get a remove abale stearing wheel

[@your_homie_james4503]

I always come here for the smooth transitions into the next bit. 10/10 editing

[@ArodGames777]

Bro ur a life saver I lost a small bolt through my e breaks and the cup holder was a way inside thank you!