How to make your mic sound AMAZING!

In today's video I am going to show you how to make your microphone sound better. it's very simple and easy!
Equalizer APO: sourceforge.ne...
Peace: sourceforge.ne...

[@beristainbear3924]

The fact that you flattened your own eq, made me respect you that much more. Just shows how confident and comfortable you are. I would hesitate

[@bendeguzhorvath1843]

Finally someone who explained well how equalizers work. Thanks for the help.

[@ven4673]

I just got a Shure MV7 and was trying to maximize the quality. I spent a few hours on voicemeeter but honestly it was so confusing and the result was arguably worse than what the stock mic sounds like. Your video was INSANELY helpful. Like, seriously. The app is very easy to use and figure out, and your technique of finding the "bad" frequency and cutting it out is just great. I think I managed to make the podcast-ey sound I was hoping to achieve. Thank you again!

[@ven4673]

Edit: I tried to speak to friends on discord and they complained about the mic! Its really strange though, I think I sound good when I record myself. Also, discord voice settings are all turned off. Any tips?

[@MacJunkyFlips]

@@ven4673 some people might think that your voice is overly basey which is what some of my friends think. try turning down your bass frequency a little bit and see if it helps

[@ven4673]

@@MacJunkyFlips im not sure because my voice sounds fine when i record but its pretty bad in discord :S

[@steadyuser]

kzbin.info/www/bejne/rXvVipuQrtyWjc0 use this

[@SANFRAN]

Reformatted and lost my EQ settings, took 2 hours to find this video after 2 years. This is by far the best video on getting the proper EQ set up for a default device. I thank you for being so thorough with your tutorial. Everyone else just puts in too much "content" and doesn't just get to the point.

[@Muslim12344]

haven’t stopped by your channel in 4 years. I’m glad to see you’re still going!! great job! keep uploading your videos are doing great!!

[@Auxcell_]

I bought myself a cheap condenser thinking it will never sound good then I saw this tutorial and I'm enjoying using it now, especially that I can tinker with the settings as well. This is an amazing tutorial.

[@englishwithferney]

This is a great tutorial. Thanks for sharing your knowledge good man. :)

[@captainkuijt]

Not gonna lie, I much prefer how you sounded without the super heavy bass and high treble... Default bass doesn't need to be increased at all in your case, but the highs can be increased *slightly*.

[@RaidernsOnFire]

i'll be honest, i preferred the tone of your microphone before but i appreciate the tutorial

[@sr74n]

my friend on Discord literally say for me this is a new mic for sure 😍

[@NotCheatink]

My microphone is SO MUCH BETTER! Thank you so much, sir. Much appreciated!

[@HyoukaAnalystLore3452]

Holy F. this deserves more views. Other videos are 20+ Minutes for a 10 minute topic such as in your Video. My mic sounds really great now, always. Thanks for this.

[@AstridytShorts]

thanks man! worked great and my voice is smooth as butter!

[@OutStander]

Holy Molly thanks a lot man you're the best person I have ever found on youtube!

[@BeastRacid]

In some cases, like in mine, when you turn on the _listen to microphone_ option, you will hear the sound getting looped. Instead, I recommend you switching the device from microphone to your headphones and test your voice on a pre-recorded sound track (for example in Audacity). When you're done, in Peace switch the device from headphones to microphone back.

[@spudmaster1793]

Amazing video. Will be doing this for my streaming setup when I get home. Thank you good sir.

[@MichaelW.1980]

While I do some light EQ myself from time to time, this heavily scooped sound feels artificial to me. I wouldn’t reduce the mids not half as much. It’s a matter of taste though, obviously.

[@valkyr989]

Brilliant. Thank you. I did this on my rode nt and it is night and day.

[@exo4tic698]

Not really sure how do you consider that you sound better with these EQ, you sound like you have a cold or underwater. Your voice without the EQ is wayyy better imo

[@below_avg_gmr2054]

Great video! Thank you are posting it, you made something that can be pretty confusing easy to understand!

[@abundantharmony]

Hm. Didn't know this worked for mics too. Useful.

[@connorluke131]

thankyou man you the best, thanks a lot

[@Liasos88]

3:17 The voice sounds much better when you disabled the settings

[@valdemarm9741]

Very cool man, thanks. Your voice and mic is very similar to mine, so I didn't need to do much change from yours. :)

[@kanamovies]

thank you so much

[@nb70783]

daang my voice sounds so nice now

[@sumWrldMusic]

2023 this vid helped me thank you

[@aaronsiew7965]

Great video!!! very straightforward and informative, got my mic to sound a lot better than it already is. Cheers!!!!!!!!!!

[@FishenFish]

You are the first person ive seen who right clicked on volume in the bottom right and clicked sound I hate when people go like go settings then volume then microphone then sound

[@EdelAyGo]

this was awesome, twomorrow ill try it, thank you so much

[@markriley852]

APO is even good for amplifing your computer to all outputs.. works great for games and footsteps

[@Liasos88]

Yeah it's nice. I used it to boost volume on a game that wasn't loud enough at 100%.

[@dj_instruments937]

The video I've been looking 4

[@killzkawi112]

Any way to get of a buzz threw here?

[@TheJumpingAnt]

Thank you very much.

[@ameryo7357]

i just wanna say i love you for this

[@relics2397]

Your mic sounded worse after you equalized it.

[@smashsmashed5934]

on god i thought i was the only one +

[@balabuyew]

Much worse!

[@MrSasUGames]

True

[@craftedpizza]

Yesss

[@pcuser6959]

no its much better i like it its batter than stock

[@WqvxSHORTS]

wow my voice better now you earned my sub my men :3

[@wallC_main]

Seems that I cant apply my tunings to my headsets, separate from my mic?

[@budgettechguy1802]

Alright, this was great. In the next video please show how to get a deep voice as well

[@kaefy2417]

How can i configure mic and headphones seperately

[@pwn3426]

I have been searching the past two days to find how to do this and still nothing...

[@kilqo]

is there a noise gate to close background noise

[@ourwrId]

i just used your exact settings :)

[@Kaye_G]

I love what this has done on my HyperX Cloud 2! Thank you! One question though, I'm getting audio delay whenever I'm using Equalizer APO and PEACE. Is there a way to fix it? Thanks a lot!

[@MacJunkyFlips]

I personally don't have any audio delay when using these programs. I would recommend trying to update your drivers. Download a program called "driver booster 4" it will scan your computer for drivers that need to be updated and this could possibly fix your audio delay issues

[@pickle_256]

How did you manage to make it function properly with your HyperX headset? I own the HyperX Cloud 2, the microphone quality sounds horrible. I attempted adjusting it using the Peace software, yet regardless of my efforts, the sound quality remains unchanged. I must be making a mistake somewhere.

[@Kowogard]

Can you Show some settings you use before you Eq your mic ? Thanks for the Video.

[@MacJunkyFlips]

my mic is stock before i make any changes on Peace.

[@aarushbansal6010]

umm u explained well but i wish if u could help me i did exact way as u told but my voice didnt change at all pls help .

[@Darkened_Void]

I have the Rode NT USB too and, even when it's edited, doesn't sound half as good as your unedited version, IDK what happens. I consider it the worst microphone I could buy...

[@lequacken9801]

Any idea how to use multiple profiles at once? I want to use my headset EQ profile and the new mic EQ you showed us how to make. Currently, I can only use one at a time in Equalizer APO, I looked it up but didn't find any solutions for it.

[@MacJunkyFlips]

unfortunately it only lets you use one profile at a time

[@bobbypopaz4688]

You can achieve this by using the configuation editor. You need to set up your devices in the config section and use a VST plugin to EQ your mic separately from the EQ setting of your playback devices.

[@advenum]

Hey man just a sidenote, these settings on my IEMs (earphones) are godly

[@flyingtuffy3502]

amazing tutorial thank you so much (i have a blue snowball and it sucks)

[@jinkianlee]

Hi there good lesson thou . But I am using this equalizer for my speaker too ! How to work both for speaker and microphone at the same time ?

[@johnnyxthemacnifient5333]

very nice done, but how do you hear youself ? i tried this but i do not hear my self when i set it to my mic from my heqdset, also when i use peace for pc souinds , i cant choose MIC settings so need to be both together but thats not posible i think whit peace EQ

[@hiddenblaze]

go to your sound settings then find more sound settings, go to the recording tab. find ur mic, then after u clicked on it once go to properties. go to the listen tab and click listen to this device. he explains it in the video

[@deotexh]

Amazing! Any tips for removing background noise? x)

[@quac7879]

krisp or use kzbin.info/www/bejne/gIDUpp-bqKqeidE

[@UNK.95]

the settings dont work when selecting microphone on peace it only works when selecting the speakers

[@Phenexes]

how to remove noise?

[@dylantignanelli1718]

i need help after doing what u said for the whole video to me the mic sounds better than before but my friends say that it sounds like a headphone mic after clippin something from a game i was playing i heard myself and it does sound like a headset microphone not great sounding like how i hear myself, is there a fix to this? i assume its cuz im using a wireless headset and not a studio headset with my audio interface and im using a software called fx sound that amplifies sound, id love some help on this

[@yamansitar6153]

Would you use this way for a singer ,thanks

[@Joe4DeadCat]

I can hear my sound changing when I click the "listen to this device" and adjust the UI, but when I record something (on restream or screencastify) and listen to the play back, it sounds as if I never used the equalizer. What can I do?

[@casualduck69]

BRO HE SOUNDS LIKE MARKIPLER

[@smellytoes6662]

what is your background? its very nice.

[@kevinalexa20]

I had a problem, when my mic was installed Apo through the configurator, there was a terrible electric sound, I was at the windows11. Help

[@Cagefighter]

is there a way to add a noise gate or background filter to cut out background noise?

[@wakeupclumsy]

1000th like :o

[@taotao5467]

My microphone is also really sensitive, how can I change that?

[@icegds18]

My voice doesnt change when i move the purple dots?

[@ProdFluid]

Can you make this kind of video but for macOS?

[@Stephanocay]

Hi Mac Junky ! Do you know a good software that would work on mac ? Looking to enhance my sound on Zoom Calls Thanks !

[@octanewhale7542]

can you just choose capture device (in) for equalier apo or do you need to also select the output as well i have a headset with a mic attached to it

[@basharcali]

Is there a MAC solution for this?

[@itspayu1074]

How can I sound like this with macbook?

[@TheJ8skater]

Does Configuration and/or Peace have to be always open/running for these settings to be active? And also when i change something in Peace does it set into effect immediately? Like im trying to find good settings for discord but when i play with the settings, nothing really changes in discord. My friends same i still sound the same even though i set some values to extremes so i guess the changes do not apply to discord

[@overkillonslash]

Can equilizer apo with peace gui run on different settings for both headphones and microphone? How to do that, Im currently running EQ for my Headphones

[@Zapper-eo7yf]

damn u remind me of technoblade

[@yoriichitsugikuni7072]

When Valorant mfs meet in random comment section

[@bongocatbtw878]

I used this yesterdays and im pretty sure others heard me with the peace thing on. Now a day later after I shutted down my pc for the night I hear myself good when I listen to my mic. Others hear it as it’s worse tho (When I’m playing the game). This is so odd because all inputs on the game and outputs are correct, etc. Any solution?

[@MartinMlBanic]

Hello, would be very glad if you could help me. I basically setted up my mic almost the same way as you showed in the video and it sounds amazing even tho it is only headset one, but in order to achieve this goal my headphone speakers sound kinda terrible now. What I did different is in effects panel turned on upmix to not center and upmix way to always. I did that because altought end result sounded nice it was way too quiet for some discussions on discord. I might have just turned pre amplyfying very high, which was exactly what I did at first. The sound of that was very distorted and all the noise from backround was there too. Everything was solved when I turned these 2 things on. The thing is that I cannot use these settings only with mic, because when I try that it sounds like without any modifications. Is there anything I am doing wrong? If possible I would like to have decent headphone speakers as well.

[@MacJunkyFlips]

If you have discord or something like that I can walk you through. I'm pretty sure I know what the problem is but it's really difficult to explain over the comments.

[@MartinMlBanic]

@@MacJunkyFlips Man it's back after few days. -_- Please can you give me link with some discord server of yours. Thanks.

[@DesolateVal]

same issue for me

[@firexwow]

I love you.

[@upgraduate]

oK FINE

[@gonasf]

Nano is that U ????? PRoffesoor ?

[@MrSasUGames]

After eq you destroyed quality of your voice. Too much cuts db in eq :/

[@andrewe165]

fr shit sounded 10x worse after the eq imo

[@seollenda]

Not sure if you can help me but I also have an EQ for my headphones using this app. Is there any way to have my headphone EQ and mic EQ running at the same time? Because I can only activate one or the other at any given moment

[@bobbypopaz4688]

You can achieve this in the configuration editor. You'll have to use some VST plugins to eq your mic separately from what peace does to your audio devices.

[@bradokbr4312]

This file available on the link is infected with Trojan =(

[@cbGamer481]

im lost no change ?

[@cbGamer481]

is this only for usb?

[@ayoubassouli182]

me too no change !! during the process i didnt notice any change not even A LITTLE bit !!!

[@Rykgo]

Wait wait. You kinda sound like markipier

[@maxxx_21]

Why it is affecting the sound that I hear and can u tell me how to fix it?

[@valdemarm9741]

I'm probably late to answer. But you want to make sure that on the right site under where it says "Select a speaker" that you've selected your microphone and NOT "All devices"

[@RayBlaxe]

@@valdemarm9741 can i do each settings separately? by that i mean is an eq for my headphone sounds, and an eq for my mic sounds separately.

[@iamtecola]

hey anyone know how I can download this on a MAC?

[@MacJunkyFlips]

You can't, this program is available on windows only unfortunately.

[@raulgomez8523]

Thanks!!!! I have de same microphone. What gain level do you have in Windows?

[@MacJunkyFlips]

80%

[@raulgomez8523]

@@MacJunkyFlips thanks 😉

[@kp-bu9rk]

cant hear myself bad tutorial

[@MacJunkyFlips]

Lmao get trolled

[@barisgundogdu830]

bro i dontunderstant it also changes how i hear music and all other sounds? can i change only my voice and not touch how i hear other things?

[@bongocatbtw878]

Make sure you choose the microphone if it’s a headset and not just the headset or speakers if u get what I mean. You do this on peace

[@lotsofmelon8242]

imo it sounded better before the editing. Now it sounds unnatural and muddy

[@takewithfood]

I have a Samson Q2U running through USB, and after spending all of 15 minutes following this guide and setting up my own EQ settings, I routinely get asked if I'm a streamer while I'm gaming because of my mic's sound quality. You've basically made my $50 mic sound like it costs $500. Thanks for the help!

[@tic2615]

do you play roblox cuz i asked someone this same question and he got the same mic

[@yobelhts18]

i have some troubled here, when i open the Peace and choose the Full Interface, i cannot hear my voice while i turn on the Listen to this device, is like noisy sound, Help please :(

[@CB-xp9ew]

On the new peace version there's an option to add bass and treble settings in the graph window, also there's a dot below 2kHz but on yours its a little to the right. Should I move the dots to match yours or did you move it to the right prior.

[@filipsuchomel7872]

Your video helped me so much. I was confused from viral videos, byt you described it to me perfectly. And you were the only one to show me listening to the microphone. Thank you.

[@EVERYWHERE_MAN]

Tell me what are you recording your voice with right now

[@MacJunkyFlips]

Rode NT USB

[@philippinelottodrawresults785]

You don't have a good ear.. Without equalization is much better. I think you might to tweak a lil hi pass filter.

[@lavish682]

how do i make my mic louder without loosing quality?

[@johnsucarter3352]

Thank you a lot i can have a Markiplier Voice now So Thank =)

[@snagz3625]

I'm on windows 11 amd when i right click the sounf thing i doesn't pop up

[@pronyacat]

When your EQ was off at 9:34, your voice was a lot better. With EQ on feels like you're somekind far away cosmonaut.

[@Liasos88]

I agree, the EQ settings makes the voice sound muffled.

[@JettyBlox]

equalizer apo and peace wont work with my mic ive tried troubleshooting and really anything

[@jakemorganGP]

10/10 video mate. Made my £20 mic sound like a rode/shure mic fr