How To Make your New Losi Mini LMT have 4 Wheel Steering Its easier than you think +1st test drive

We Make the New Losi Mini LMT have 4 wheel steering using stock parts then we run it
Buy Part HERE www.avantlink....

[@kriseast8414]

I added rear steer, plus full lockers to my mini. Absolute blast to drive, especially on my little dirt track

[@chrisgreener5599]

Lots of people that haven’t bought it complaining about the price. Go find a friend who has one and drive it - it’s a freaking riot. Anodized frame, smooth coilover shocks, metal drive train and tons of licensing. Licensing aside you couldn’t build one this size for this price. Suck it up, spend the money, have fun.

[@nocontrolrc8290]

It's worth every penny.

[@viperonfire2006]

I bought both minis for my boy’s and the are having a blast playing non stop!

[@nocontrolrc8290]

@@viperonfire2006 that's awesome

[@mattferrell90]

good stuff bro cant wait for mine to show up so I can get some bash vids up on the tubes myself might even have to go rear steer as well

[@jan-hg9vi]

For just a few dollars less than 300 bucks this should have come with FWS.

[@HeCody]

Love this upgrade, is your ESC burned out? because I also want to upgrade the 4WS, but I am worried that the ESC cannot bear the load.

[@nocontrolrc8290]

The esc will handle 4ws just fine. Thanks for watching

[@giostealthr1]

Great vid

[@justinsmith9305]

Can you do a video on how to install a servo reverser?

[@nocontrolrc8290]

@justinsmith9305 you can buy one the servo plugs into then that plugs into the receiver. Very common on rc aircrafts

[@allscalerc]

Awesome, thanks for the tutorial!

[@nocontrolrc8290]

Thanks for watching

[@3dconceptsofutah757]

Cool setup! Do you have to rewire the pot or just the motor to reverse the servo? Cheers!

[@nocontrolrc8290]

I just revered to wires from the drive motor. But I would say just buy a servo reverser they are cheap from Amazon

[@remileblanc2920]

@nocontrolrc8290 wich servi reverser do you get. I got a pack of 5 and nothing works??

[@jamesbehling491]

Is there a way you can list all the parts in your description?

[@nocontrolrc8290]

SPMSSX108 SX108 SERVO LOS212049 FRONT DRIVESHAFT SET LOS214041 SPINDLE AND CARRIER SET LOS211051 STEERING TIE/DRAG LINK SET LOS257007 4X8X3MM BEARING SET LOS212036 UPPER 4LINK / SERVO PLATE LOS215001 CAP SCREWS LOS214046 KING PIN SET EFL08261 E-flite Y servi harness or any like y harness I ordered all these parts but still have not received them, so I robbed the pieces from my second truck til they come in. Hope this helps

[@craigdemarest3012]

What did you use the Los215001 screws on

[@craigdemarest3012]

Would you be willing to show how you rewired your servo

[@nocontrolrc8290]

I can but I would just recommend ordering a servo reverser they are right on amazon cheap and have been used on rc planes forever ones like these amzn.to/4bqdb6r

[@RyanRad01]

Any information on how to lock the diffs?

[@nocontrolrc8290]

I will pull one apart tomorrow and see what the options are

[@justinsmith9305]

Do you have a parts list?

[@nocontrolrc8290]

SPMSSX108 SX108 SERVO LOS212049 FRONT DRIVESHAFT SET LOS214041 SPINDLE AND CARRIER SET LOS211051 STEERING TIE/DRAG LINK SET LOS257007 4X8X3MM BEARING SET LOS212036 UPPER 4LINK / SERVO PLATE LOS215001 CAP SCREWS LOS214046 KING PIN SET EFL08261 E-flite Y servi harness or any like y harness

[@Dody_dee]

Is it use front original part or aftermarket parts?

[@nocontrolrc8290]

I used parts off a second truck because parts were not available at the time. They should be by now. But it may be cheaper and easier to get another front end off ebay to take the parts from.

[@Dody_dee]

@@nocontrolrc8290 thank you.

[@CarlosDaSilva-g7f]

Can you post a list of part numbers and links please!

[@nocontrolrc8290]

SPMSSX108 SX108 SERVO LOS212049 FRONT DRIVESHAFT SET LOS214041 SPINDLE AND CARRIER SET LOS211051 STEERING TIE/DRAG LINK SET LOS257007 4X8X3MM BEARING SET LOS212036 UPPER 4LINK / SERVO PLATE LOS215001 CAP SCREWS LOS214046 KING PIN SET EFL08261 E-flite Y servi harness or any like y harness I ordered all these parts from Horizonhobby.com but still have not received them, so I robbed the pieces from my second truck til they come in. Hope this helps

[@CarlosDaSilva-g7f]

That’s amazing!! Thank you!

[@paulsimons1164]

Swap in 2 wires in a clip is a lot easier.😂😂😂😂😂😂😂

[@paulsimons1164]

😂 I would just took a hobby knife and took The Wire out of the clipand then in otherwire the clip and reverse the 2 wires in the clip.😂😂😂😂😂😂😂