How to make your own laser galvo marking machine. Fully 3D PRINTED!

[@kattalakshmisaisravani5794]

Can you describe which controller you are using for this and is xy2-100 protocol used for the galvos system? It would be of great help if you can share the controller part

[@fodaodocs]

Great!!! Which controller did you use?

[@zaprodk]

You would only call that DB-25 connector a LPT connector if it was on a printer (LinePrinTer) :)

[@scottrodrigue4595]

Hello great job btw Can I connect a fiber marking source to my cohesion3d board I want to create a dual source unit like trotec or epilog laser with my co2 laser thank you

[@Endurancerobotschannel]

thank you for your kind words, yes, dual system would be interesting... take a look at our BEAMO FLUX upgrade endurancelasers.com/30-watt-co2-laser-engraving-cutting-machine-beamo-flux-first-start/

[@robertgayle4079]

Thank, I enjoyed the video, but was wondering how the laser moves, since it's fully enclosed in stationary compartment.

[@joetkeshub]

When it comes to laser, Galvo systems use mirror technology to move the laser beam in different directions by rotating and adjusting mirror angles within the boundaries of a work area. Galvo lasers are ideal for using fast speed and intricate fine detailed marking and engraving. The web site is here: bescutter.com/pages/what-is-galvo-laser

[@Endurancerobotschannel]

with 2 mirrors inside, that is why it is called, galvoscanner

[@brandonperez4847]

So the “mirror” in galvo head physically moves to reflect the laser to make the pattern cut?? Good vid too.

[@arifsetiawan7529]

Nice job..

[@Endurancerobotschannel]

Thanks!

[@LSEngraving]

what beam expander did you use ?

[@Endurancerobotschannel]

12X

[@jmd28522]

What about if only one mirror works??

[@98f5]

how do you drive the module? i'm sure not spending 800$ for a controller lol.

[@joetkeshub]

exciting project indeed.

[@Endurancerobotschannel]

thank you!

[@AnOldMansView]

What was your total cost if not a secret please?

[@markvincentcocjin]

I'm confused. How many arms do you have? :O

[@Yakroo108]

👍👍👍

[@joetkeshub]

It's not a "total" DIY galvo 'cause you use a module for it...

[@Endurancerobotschannel]

almost 3D printed)

[@ckgconcept8672]

salut ...pourquoi ne pas faire un galvo laser avec une diode Coherent Fap 800 40w ??? Ce serait vraiment du Diy de cette façon lol

[@txdare1830]

Enjoy it

[@roshanjadhav1]

Hi can you also teach me how to make it? I can also pay you. I am in Germany 🇩🇪.

[@m1geo]

Ah, so this isn't making the galvo. This is boxing one you bought. 😑

[@mewmew32]

fully 3d printed..except the $1k galvo module

[@laszlom8647]

вопрос на хрена ? за 1500 баксов можно купить 20 ватт лазерный маркер с автофокусом весом 15-20 кг

[@jackblack7132]

100%. Уже если брать гальво сканер, и заниматься самоделкой (чтоб дешевле на 50 баксов получилось), то и ставить туда волоконник, а не диоды шаманить. Такое гальво, как на видео, в комплекте с линзой 500 баксов, 250-300 плата управления гальвой. Не понятно где цимес: купить на 700-800 уе оборудования для почти промышленной работы и прилепить на скотч к нему диод, который либо долго и производительно, либо нормально работать не будет... Если гравировать фанеру и пластики, то любая труба 40Вт за 50 баксов на али будет в разы производительней и на много дольше отработает, чем этот NUBM44 диод, но не будет гравировать металлы. Но и диодом - это тоже не гравировка, а так... что-то похожее.

[@laszlom8647]

@@jackblack7132 650 БАКСОВ + ДОСТАВКА .а цимес понятно хде , в видео и просмотрах ))

[@damieke]

@@laszlom8647 what price is that?

[@ulrichkliegis4138]

I miss the 'how to' part, you don't teach anything at all. And the screws that you use to fix the legs to the base plate are anything but M3. M3 is a metric thread. The screws in your video are some plastic screws, just junk. Back to the lab!

[@nin1ten1do]

Price for system without laser source is?? ( pls tell me price, or give me link.. i dont mind heart or like's they are useles)