How to Manual Reset Canon Pixma G1000 G2000 G3000 G4000 Series Fix P07 and 5B00 Error | INKfinite

[@INKfinite]

NOTE: If this procedure didn't work on your Canon G-series printer then you can try the other procedure below 👇 How to Reset Canon Pixma G1000 G2000 G3000 G4000 Printer with Resetter! Fix 5B00 Error ➡ Video Link - kzbin.info/www/bejne/p527m6VnhdOUo6M

[@chrisdolan3741]

This video was super helpful and fixed my printer issue. Trying to read the Canon manual info on line is like trying to understand a different language. But by watching this video, I fixed the problem in 5 minutes. Thank you!!

[@INKfinite]

Great to hear!

[@mohammedtanveer5785]

Thank you so much :) I had replaced ink absorber pads by watching another video. All that was pending was to reset the count, which I was successfully able to do following this video. ** Leaving this comment here in case If I need it again in future **

[@INKfinite]

You're welcome!

[@scottlawrence6396]

Had to go through it twice - but it worked for my G3000 which was about to go in the trash. Saved my bricked G3000 from landfill!

[@Suiiii7605]

THANK YOU I HAVE BEEN TRYING TO FIX MY PRINTER FOR SOOOO LONG YOUR A LIFE SAVER 💗💗💗

[@selenabone1]

You are AWESOME!!!!!!! It fixed our issue. We only had this printer for a year and are so happy we do not have to purchase a new printer. Yay!!!!! Thank you again Now if only we can get the color to stop printing out green only! 🤦🏻‍♀️

[@saitanay]

Repeated twice. It worked. I am sure I followed the exact thing during the first time also. Thanks for for helping out with this video.

[@INKfinite]

Great to hear!

[@justinechim]

Thanks for the voice instruction, which is much easier to understand. Super thanks.

[@vinaysharma2553]

Thanks for your support. my printer started working.

[@INKfinite]

Great to hear!

[@ednagettobed5793]

Thanks for this. Canon support was lacking (as usual). Followed the steps in this video, fixed problem immediately.

[@INKfinite]

Glad it helped!

[@jessicapacheco6659]

Thank you so much for this video! It helped me more than you know.

[@philbrown5332]

You are brilliant! Thank-you so much, you have just saved me quite a lot of money & a whole heap of trouble.

[@INKfinite]

Glad I could help!

[@puucciii]

OMGG THANK YOU SO MUCHHH YOU'RE MY LIFE SAVER

[@thAdmakesstuff09]

freaking lifesaver bro

[@DONSACUEZA]

VERY CLEAR INSTURCTION THNKU

[@BulbaHD1]

You have a lot of knowledge. I subscribe to your channel

[@the_varunlohar_07]

Thank you so much no words in my keyboard for your thanks you lines😢😢😢

[@INKfinite]

Most welcome 😊

[@xanghx4924]

Thank you very much, it solved my problem.

[@INKfinite]

You're welcome!

[@biplobbaruah685]

Thanks🎉🎉❤ it save my red and green 7 times blinking problem

[@snehalpanchal9701]

Thank You Buddy 🥰

[@INKfinite]

You're welcome 😊

[@kapkeyk9866]

Hello po.. Any advice or tutorial vid po sa canon g2010 series troubleshoot printing out horizontal lines in printing photos po? Hope you'll notice this. Godbless

[@Desire_of_Ages]

I have a Canon Pixma G3202 & has a 4 blink error light. How can I fix? Thanks 😊

[@jameskerr1154]

Thanks for this, fixed my problem. The Canon manual is fairly awful, and really just says to send the printer in for repair.

[@INKfinite]

You're welcome!

[@kiblerjuergen5247]

Thank you sir!

[@abhishekprasad8563]

How to fill-in ink in canon printer ink-pipes:- Keep stop-button long pressed until the orange button of ink icon blink 5 times on its own, and then release the stop-button That is, Do not press the stop-button 5 times, rather you have to long press the stop button, count the orange light of ink icon blinking 5 times on its own, and then release the stop button. --------------------------------------

[@salvo8663]

Thank you ! The problem seem solved! :)

[@INKfinite]

You're welcome!

[@masdevallia1603]

Thank you ❤

[@rtt4163]

Thank you so much it worked!

[@INKfinite]

Glad it helped!

[@Happymemories-24k]

Pwede po ba ito sa g2000 error 1700 Ink absorber is almost full.?

[@56cbarker]

Thank you!

[@INKfinite]

You're welcome!

[@emzdizturkz]

🙏🤎THANK YOU VERY MUCH FOR THIS VIDEO!!! IT HELPED ME SO MUCH!!! 🤎🙏

[@INKfinite]

Glad it helped!

[@rishavgupta2939]

I have this same model.. printing quality decreases . Any tips

[@stefanraiman3995]

Thank you so much its works

[@INKfinite]

You're welcome!

[@ojalsinghal2008]

THANK YOU SO MUCH

[@INKfinite]

No problem

[@answ3rtarot395]

THANK YOU SO MUCH! YOU SAVED ME LOTS OF MONEY!! MANY BLESSINGS!!!! 😍♥

[@onlinegaming4471]

Canon printer reset hone kitna time lagega

[@agrawalpuran]

Thanks for the information, it worked

[@INKfinite]

You're welcome!

[@officialranjityadav321]

Thanks for giving information ❤

[@INKfinite]

You're welcome! Happy to help. Consider subscribing to our channel to get you updated 😉

[@barbieamica2023]

What about if the green light is not on but only the orange button is on?

[@nghibien8109]

Thank you

[@INKfinite]

You're welcome

[@miniaturebricks8491]

Thank you so much, clear concise instructions, really helpful video.

[@keerthi-s7b]

bro this is amazing! this hack works perfectly. thanks for sharing this hack this literally saved my life .+ 3

[@INKfinite]

Happy to help

[@sanbabilaandroid]

Thanks , its work

[@INKfinite]

You're welcome!

[@jaycraig674]

My orange light style flash dont know wy just put brand new ink

[@WalterMinz123]

It worked..tq

[@INKfinite]

You're welcome!

[@prshnt2175]

thank you veuy much

[@INKfinite]

You are welcome

[@AjayYadav-tj6jq]

Thanks 🙏

[@INKfinite]

You’re welcome 😊

[@kingreee4218]

hello po pano pag dito na part 1:20 di po lumalabas yung orange light

[@HayItsMee]

Thank you so much Man, it worked.❤❤

[@INKfinite]

Glad it helped

[@hailemichaeltad95]

Perfect !!

[@alanyang5441]

useful

[@roncallilisa]

What if my yellow ink light is flashing 7 x and my power green light flashes too. Also my wifi light is on too but not flashing? How do I fix this?

[@acekraus6284]

Good day po sir, canon printer ko po, finctional po cxa pero yung led light nya sa control pannel ayaw na mag ilaw... Any advice?

[@chandakhtarcreations44]

it's working

[@campparri2000]

How tot Conect wireless ?

[@hasanrana9395]

Tnanks

[@INKfinite]

You're welcome! Consider subscribing to our channel to get you updated 😉

[@peterjohnavancena6800]

Good morning, Sir ganyan po ba talaga pag canon G series, lagi na lang nag cloclogged ung printer head niya tapos kapag mag deep cleaning ka naman magreresult sa ganyan kasi napupuno ung ink counter. Sana mapansin. And baka mas may marecommend kang printer na hindi laging nag clogged masakit kasi sa bulsa at sa ulo. More power

[@fazaljamil6217]

After green blinking stop when I press the stop button 5 time it's can't work .how to solve it please make vedio.

[@Etandegi]

I did it but my printer didn't print black and it prints color print with line stripes. What will I do 🙏🙏

[@MimoKatsuki]

Am i missing something? Its not working fr me pls help

[@camillem.502]

pano nmn po yung Mg3070s, how to fix po

[@elimarbaterna6761]

Sir good day. Sorry kong dto na po nag comment marami na kasi nag comment don about sa Smart bro openline. Ano po ba yung magiging new wifi password? para dun nlng po eh aaccess yung dashboard ng ZTE :) Maraming salamat po

[@INKfinite]

Anong smart bro modem po ba? Madalas naman sa mga video namin pinapakita at sinasabi namin yung default password

[@LungritKharmaw-kz7zr]

The reset is not working for one of my printers. The red light is still blinking

[@jk-005]

Ts5051 please

[@KingFrancisco-s7w]

Nakakapasok ako sa service mode pero pag ipepress na stop button five time then power button namamatay lang ang printer.

[@5brothersphotoshop246]

whey my prite contesnues red light sir

[@MarkAlvinPodaca]

Good day Po paano Po kaya sa CANON 4770 ,5200 ERROR?

[@INKfinite]

Kapag error 5200 sa cartridge po ang problema nyan. Try mo palitan yung black or color cartridge ng printer mo

[@lijoalw]

But after press the stop button the green light blinks 7 times

[@mhyrc.6173]

Sir, I followed this procedure to reset 5B00 error indication pero pag dating ko sa stage na 4 times press ng stop button ay nag switch off totally yun printer after several blinking ng Led indicator.. bakit kaya ganun naging action ng printer ko? Any advice on this regard? Tnx in advance.

[@INKfinite]

Check for any faulty cartridges before doing the step. Faulty cartridges may interrupt the procedure

[@selvamani3188]

But it showing that error symbol and black ink

[@bkesseofficial2242]

Hanggang 1st step lang yung saken baket di nag tutuloy?

[@banothsrikanth1797]

Yellow light on printer not printing

[@VirayMaEllaineJoy-]

The blinking wont stop

[@carlotv5519]

hi

[@jackisCOOLL678]

Im scared, the creature inside of my pillow keeps clawing at my skull while i'm trying to sleep. Any recommendations?🤗

[@markleininger95]

There is nothing on the printout

[@yoshibuta926]

There would be a small text on the upper part of the paper

[@bongmantu]

Me too faced now this only

[@lijoalw]

Canon g2000 not coming on

[@MonikaGangoliyavlog]

❤❤🎉🎉😊😊

[@carlotv5519]

hi you easti m calo

[@davidbhandari4910]

1:59

[@amk490]

🙏🏼🙏🏼🙏🏼

[@oni__kaage]

GGs

[@5brothersphotoshop246]

hey progrom not printing

[@CHOSENONESHIPHOPASSUMTIONSIMAG]

THE ONLY VIDEO THAT WORKED YOU A GENIUS MF

[@ashishkumar-xq9lz]

bhai apna whtsapp number do m video bej du...red light continue chal rha h...kuch smjh nhi aa rha...pls help

[@andreawittenbrink3706]

Thank you so much for your help, very easy to follow your directions.

[@INKfinite]

Glad it was helpful!

[@peterpaulej2622]

Thank you

[@INKfinite]

Welcome!

[@camillem.502]

pano nmn po yung Mg3070s, how to fix po

[@campparri2000]

Thank you