How To Manually Install Your Print Server Windows and MacOS - PM1115UW | StarTech.com

How do I add the printer to my computer from my print server in Windows or MacOS? StarTech.com walks you through how to manually set up your printer whether it's via ethernet connection, wireless, MacOS or Windows.
Any print server installation questions and troubleshooting that you may need for the StarTech.com PM1115UW Print Server.
0:00 Introduction
0:15 Where to Find the Online Software Installation Guide
0:32 Manually Setting up the Print Server
1:03 Finding your Wired Connection
1:38 Accessing the Web Interface of the Print Server
1:48 Web Interface Login Credentials
2:10 Finding an Available IP Address
4:32 Using your Print Server with a Wired Connection
5:25 Connecting to your Wireless Network
6:19 Advanced Wireless Settings Setup
6:30 Finding your Wireless Encryption Type and Password
8:03 Set up in Windows
9:56 Set up in MacOS
Online Manual: sgcdn.startech.com/005329/med...
Still have questions? Contact us via our award winning support 24/5 at 1.800.265.1844 or visit StarTech.com for our live chat.
#howto #printserver #techtok

[@brendandowling3485]

It would be great if its actually shown how to setup the device using a Mac. The video only shows how to do the device setup via Windows and only at the end does it show how to add it via Mac but not actually set it up.

[@SlayerOfHellWyrm]

It's basically the same, just via terminal and the equivalent terminal commands. That's primarily the only difference. It would be nice to show the setup with the terminal commands and the macOS screens, I agree, but, It's already a decently long video. Maybe there'll be a part 2 or something in the future for macOS setup from start to finish. Maybe try their support phone or chat?

[@alhadad1979]

Can this solution offer an alternative to "google cloud print", print directly to printers without a need to any pc as intermediator?

[@startech]

We're afraid not. This server would require the drivers for the printer to be installed on one of the supported OS version. Windows® XP, 7, 8 / RT, 10, 11 Windows Server® 2003, 2008 R2, 2012 Mac OS® 10.6 to 10.10

[@fmoll8748]

Do i need a wireless connection access the webinterface of the webserver? My PC only has an Ethernet Adapter and i can't access the interface.

[@startech]

You can initially configure the print server over a direct wired connection using the steps outlined in this section of the video: 1:03

[@frankhoellen8975]

Can this device be used in airprint environment by printing directly from iPhone or iPad?

[@startech]

Hey, Unfortunately, iOS, iPadOS, and Airprint are not supported by our Print Server.

[@dragondiy]

Needs a troubleshooting section. I can't get connected to mine by any method.

[@startech]

Hi! Have you connected with our Technical Advisors? Visit the support section on our site to connect via phone, live chat or email. www.startech.com/support

[@BLBlackDragon]

@@startech Ended up not needing to. Rebooted the print server a couple of times and it finally started working as described. Probably something I did wrong. It's been working perfectly ever since.

[@CarlosMartins_]

How to reset the device???

[@startech]

Disconnect the Power Adapter from the DC Jack, located on the back of the Print Server. 2. Press and Hold the Reset Button while reconnecting the Power Adapter to the DC Jack, located on the back of the Print Server. Continue to Hold the Reset Button for 10 Seconds, then Release the Reset Button. The Print Server will restart with the Factory Default setting