How to Mass-produce Car Tires With Amazing Technology. Vietnam Tire Factory Manufacturing Process

[@toddtyoung]

THANK YOU for NOT putting some annoying, cheesy music over this. It’s much better hearing the sounds of the factory.

[@milinohalder2476]

Yes I agree

[@prm414]

Very interesting, I love watching manufacturing processes. And just the natural noise, no annoying music.

[@trvman1]

Hopefully giving China a run for their money. Probably already here in US.

[@cward1954]

I worked in a tire plant for a few years. Brings back memories seeing some of the processes. Their facility is a hell of a lot cleaner than ours was. They take better care of their equipment too.

[@江世武-c6d]

-

[@claudedjawoye6345]

Are you a priest

[@smn.3.6.7]

Which tire factory did you work in?

[@smn.3.6.7]

Which tire factory did you work in?

[@benjurqunov]

But how does that explain their neglecting special homosexual rights ?

[@DaveBuildsThings]

Just bought four new Kumho tires for my wife's car about a month ago and then stumbled across this video. Having worked as an Industrial Electrician in different manufacturing industries (now retired / not meant to be a tire pun) all I can say is that I'm very impressed with the process, the automation, the cleanliness of the facility and the quality of their product. Thanks for sharing this. 👍

[@qzorn4440]

Yes. Tire plants are not very pretty and they seem to get worse as time goes on.

[@longnguyen-zu1qe]

For health reasons why they are not wearing mask. No safety.

[@vicpetrishak7705]

Does Kumho Tire give you a pension too ?

[@DaveBuildsThings]

@@vicpetrishak7705 Sorry bud. I never worked for them. I just made a observation after watching the video. But thanks for that well thought out and reasoned reply. You're parents would be proud of you.

[@vicpetrishak7705]

@@DaveBuildsThings Did your wife type this reply for you or your boyfriend ?

[@jacktoumhangchanelcover8323]

Now ,l am a worker in the company kumho tire vietnam.l am happy when l work the here .thanks mr; han boss

[@poncethegayboi]

I work at a tire plant also. I'm a mechanic. I working curing. Love it

[@jacktoumhangchanelcover8323]

@@poncethegayboi good luck

[@craigpennington1251]

Had some of these tires on my semi. They performed great. No complaints. They make a great product. Thanks for posting this video. Very interesting.

[@nicholasr7987]

They make good tires. Now only if 5 distribution centers don't make profit on them before they reach my truck.

[@jafo766]

We bought Kumho in 1990 did not know where they came from , we'd $urely buy them again.

[@TimberTitansUS]

*Absolutely incredible production process! It's astonishing how the equipment was designed and manufactured to create these tires. A true inspiration.*

[@BlackPill-pu4vi]

All of that magnificent production technology and they left the most important thing out. Stamp the max tire inflation pressure in BIG PRINT. BTW, every tire manufacturer fails to do this as well. The important info is in tiny print.

[@secondov1]

타이어 만드시는 분들 존경스럽군요.

[@earthelder2065]

I do too!

[@paulelliott4590]

Thank you for posting this. I work for a tire manufacturer in the United States. There is no automation, everything is done by people. I enjoyed watching this.

[@thomasburke7995]

Yep its also why American made tire are so bloody expensive.. and because American made tires are done with union hands they cant compete price wise on a world market. If I was Goodyear or firestone CEO. .. every domestic factory would be automated.

[@김동환-h7i]

9ㅠ

[@vernonslone8627]

@@thomasburke7995 Robots don't buy tires,,,,,

[@Lacronh]

Do you know what the white liquid was at 16:00 that was rolled onto the inner rim and why?

[@paulelliott4590]

@@Lacronh the white liquid is soapy water. It makes the joining of the tire and the rim, quick with no friction damage to the tire.

[@VenturiLife]

I've heard Vietnam is booming economically. A lot of the rubber production is in SE Asia so makes sense to have the factories there. Thanks you've documented the process well here.

[@edraven693]

my friend told me years ago that's what the Vietnam war was over rubber, and I thought he was BS he was drafted and he went through basic training and his battalion was going to Vietnam he split and he stayed gone until he knew it was safe to come home

[@edgarkuylen276]

This tire production video was very enjoyable because of its detailed and intricate process. We want more of such processes. Thank you.

[@donb782]

Worked at General Tire in the 70s. This video looks nothing like our plant did. Key things I remember are dirt and noise of the banbury’s, the smell of the rubber, the bandaged fingers of the tire builders, the heat and steam of the curing room. An occasional blowing of the bladders in the curing presses. Fond memories in a way. I found this video really interesting!

[@robertmoldovan5931]

I worked at Denman Tire in the 70s and 80s and I know exactly what you are talking about fellow rubber worker.

[@michaelkenny8540]

Carbon black gets everywhere.

[@GaryTeckenbrock]

I worked as a banbury operator at general tire from 1977 to 1996. This plant on the video is much nicer

[@donb782]

@@GaryTeckenbrock my dad worked the banburys for years at the Akron plant. I think he retired about 1979 ish

[@dennisgood3191]

I worked at Firstone tire and rubber in Des Moines Iowa from 1966 to 1986 I built passenger tires then tractor tires and finally earth moving tires It is very hard to see everything automated and not having all the tire builders no longer. Very sad in a way. I loved my 20 years that i put in and it was hard work but pay was great.

[@BizotonBoy]

Now I have greater appreciation for my tires.

[@덕심박-e3n]

타이어만드는과정 잘시청했습니다 거의 자동씨스템인게 신기하기도하고 자랑스럽네요 이번영상을보니까 금호타이어에대한 신뢰감이 더 커지는군요

[@latteyoutube7716]

좋은 영상 감사합니다. 매일 출퇴근하면서 지나치는 빈증 금호타이어 공장인데 영상으로 타이어 제조과정을 보니 정말 대단하네요.

[@종석박-l4b]

생산 공정이 궁금했는데~ 세밀하고 정교한 시설등이 엄청나네요~잘 봤습니다~

[@MrAudioBill]

I am truly impressed by this video. I have not encountered "Name Brand" manufacturers releasing such an in-depth view. I've owned Kumhos' and was pleased with them.

[@arturoaguilarsanchez2020]

I missed the part of the process where the steel is added to the tire

[@bertiesworld]

10.45

[@johnbragg2014]

I know I'm late to the comments party. But why would you ask instead of going back and reviewing the video? Can you explain as I'm very curious why you would do that?

[@VitaKet]

2:20 pounds of glue according to regulations 3:10 mix glue (prepare glue) 3:23 Glue rolling and coding 5:55 Glue the finished product on the back of the tire 6:13 glue code and glue data border 8:45 go to the roll and wait for the workpiece to be assembled 9:35 Cut the thread for the tire blank 9:50 embryo creation 10:40 Install 2 steel rings (steel frame) 12:50 high temperature vulcanization 16:00 quality check 17:20 final check 17:40 shipping and packaging I used to work on tires before, but I didn't have modern, advanced machinery like this, so I understand a little about the process.

[@alanmandragorian1776]

When are the steel or fiberglass “belts” put into the rubber?

[@husseinswal9775]

How much does one ton of tires produce?

[@StrangerInAStrange]

@@alanmandragorian1776 I believe that would be @ 9:55

[@timb7775]

I prefer my tires hand made.

[@user-oy4lk7fd9w]

almost everything you said was wrong though 🤔 @VitaKet

[@SonNguyen-ff5fs]

This video bring back my memory of the time I used to work at a tire factory in Saigon Vietnam in 1983-87. It was the "HTX Cao Su Q. 3 (Rubber Cooperative 3th District)". We made everything manually. The rim and the layer of threads were recycled from old foreign made tires. All were natural rubber. Some were smoked crepe (2:56?) and some were fresh white bowl shape. The black color of the tires comes from very fine carbon powder to provide wear resistance property. At end of each shift we looked like comingout from a coal mine. There are a lots more chemical and the rubber sheets each has different property for the side, tread and around the rim. It is good to see modern factory there now. Thank you for the video

[@edraven693]

i could just imagine i worked at a job that used lots of graphite power and no respirators i quit not getting that in my lungs

[@m.damon.zhakav.41]

😅👍👍🍁

[@soladei]

공장이 깨끗하네요.. 금호타이어에 대한 신뢰가 절로 생깁니다...

[@franciscocerutimahn]

Finally a well made and complete end to end video about automated tire production. THANKS !

[@ozymandias7940]

Honestly, it's left me feeling a little deflated... 😂😂

[@L.RILEYSQUATS2PEE]

I'm floored by how clean their mixing department is. Haven't been in the tire business in 11 years and I'm pretty sure I'm still cleaning carbon black out my nose and ears 😂😂😂

[@jafo766]

Don't expext they'll need flood the country with immigrants to do the work either like CANADA !

[@stephennind4414]

😂😂😂. The mixing department I worked in was exactly the same. Black as the inside a bag.

[@michaelkenny8540]

The one advantage was you got half an hour washing time at the end of each shift. You also got to know your workmates rather well as you needed someone to do your back.

[@jafo766]

@@michaelkenny8540 Sounds like $um Broke Back Mountain tire making there ?

[@Lacronh]

What is the part at 16:00 where it rolls on the white liquid around the inner rim of the tire?

[@mrk1075]

If you work there until you get old then you will re-tire. 😂

[@ozymandias7940]

Yes, but in the meantime, be careful where you 'tread'. 😂😂

[@wiffmastermase]

I've seen Haida tires with better quality than this joke :)

[@Socialifee]

😂😂😂😂😂😂😂

[@jamespruitt6718]

If you don’t get “burnt out” first.

[@joeyhebert9881]

This is why I read the comments.

[@stayfitkeeptraveling]

Korea Company!!ㅎㅎㅎ 금호👍👍

[@hien79vlog]

Nhà máy sản xuất săm lốp ô tô hiện đại quá like. Cảm ơn bạn ❤

[@giaphan536]

Đây là công ty công nghệ hiện đại của Nhật Bản mà. Chỉ đặt nhà máy tại Việt Nam thôi .

[@DucNguyen-ht1yf]

@@giaphan536 Đây là dây chuyền sản xuất vỏ xe hơi thương hiệu nổi tiếng KUMHO (của Hàn Quốc), không phải của Nhật Bản, và nhà máy sản xuất đc đặt tại Bình Dương, VN thôi (không phải Vietnam Tire đâu nhe!).

[@globalnetizen956]

@@giaphan536 Hàn Quốc đang bỏ xa Nhật Bản. Đừng tôn thờ Nhật Bản nữa.

[@高朗-g7b]

@@globalnetizen956 năm nay thu nhập người Hàn đã vượt qua người Nhật , Hàn 36k Nhật 33k

[@chrisdooley1184]

The mechanical engineering involved in the machines alone is mind blowing! The tolerances, the intricacies, wow 😮

[@CoreyChambersLA]

Terrible quality. The tires blow up like a balloon in hot weather.

[@arwzqu1964]

So interesting to see this factory in action.

[@davidvasquez3564]

Awesome video I never get "Tired" off washing it.

[@zelgemini24]

Vietnam made tires are good quality

[@johnbrookhaven7134]

i can trust product made in vietnam..they check product carefully before out for market..good quality control..

[@donaldculp3759]

I worked for Goodyear and I can tell you that tire building is one of the most complex engineering efforts out there.

[@DiHandley]

At the end of the day you can have the best car in the world, but if the tires are crap you’ve wasted your money!

[@AjiPras-ot6rv]

J

[@AjiPras-ot6rv]

Olmmojo

[@AjiPras-ot6rv]

Ooulho

[@AjiPras-ot6rv]

O

[@StephenMattison66]

Great video, beautiful tires, amazing factory, so quiet & clean! I spoke with a tire expert long ago who told me it's very difficult to make a perfect tire. This factory makes it look easy!

[@d.jensen5153]

Very interesting comment! I've consistently gotten better results with off-brands like Mohave and Hercules than name brand tires like Michelin and Firestone. This surprises me. You've shed a little light on the mystery. FWIW I may shop for Kumho tires next time.

[@negmahabib1925]

لا يوجد افضل من ذالك❤❤

[@giaphan536]

Công ty của Nhật Bản. Đặt nhà máy tại Việt Nam.

[@garyandrewranford]

Excellent video due to its pure visuals of the the tyre making process without any ear ringing soundtrack 😁👍

[@edwardgabriel5281]

I remember the ancient machinery they used back in the 40s and 50s. It was all hard work and stifling heat. Can one imagine the making of the machinery in this video. Amazing.

[@용규조-w4u]

😮

[@mysygisun3335]

sk工場で有る時点で、jp・米・仏レベルのタイヤ耐久はないでしょうが、 skで作るより、良いタイヤが出来て居るのでは。

[@richardmartink679]

I’m sure a lot more people too. Jobs for people who needed them. Not a single worker in the process here. Not good compared to the 40s. When we made stuff and those people could be middle class

[@coastalbeer]

I never get tired of watching this!

[@knobsdialsandbuttons]

I never tire of watching these videos 🙂

[@djvycious]

I like watching them when I'm feeling deflated.

[@knobsdialsandbuttons]

@@djvycious lol 😄

[@geoffnoyes520]

Tread softly with those tyre jokes, they soon become tiresome and wear thin😊.

[@knobsdialsandbuttons]

@@geoffnoyes520 LOL, I think those jokes have been worn out for a good year or two..,

[@childfreesingleandatheist8899]

@@knobsdialsandbuttons I think most of all those jokes have all gone flat by now.

[@donaldwayne4219]

I bought Kumho light truck tyres for my Ford Ute. Good load rating and better traction on wet roads than I expected from a less expensive tyre. Very happy with them, as I drive every day and need a good load rating for carting soil and mulch for the gardens on the weekends

[@perceive8159]

Excellent! Not thinking of doom and gloom, but it made me think how important the outside supply links are for the raw materials needed for these manufacturing companies, disrupt that flow the company's in trouble, there's a fine line there.😎

[@손원식-d4n]

기술 파이팅입니다 🎉🎉🎉🎉🎉

[@cengeb]

Who makes the equipment that makes the tires, that's an even more impressive thing

[@jafo766]

The $tuff looks TOP $HELF , likely Germany or $wiss....NOT JUNK from Canada , ask Geza Foods Brantford how they liked their new palletizer from Mississauga Ont....LOL.....U.K RUBBI$H !

[@tac6044]

I make

[@SantanKGhey1234]

in manufacturing as large as this, there is usually an internal group of Industrial, Mechanical and Electrical engineers who design the layout and equipment. Most of the components are purchased and some are custom made. Once the design is set and components are decided, another set of trademen assemble and set up the equipment in place with guidance of the engineers.

[@МаксимЖгарев]

​@@SantanKGhey1234рррррррр

[@toddtyoung]

An even greater wonder: Who made the people who made the equipment that makes the tires? What an amazing Creator we have, who has made the people who can make such things!

[@masterQ20]

Excellent man, thank you for sharing your work, God bless you 👍

[@lobotire]

learnt a lot from this video , i sell and install hundreds of tires i always wondered how these things are manufactured, and how tires sustains all the road conditions and carry tons of human and steel on top , its an eye opener KUMHO is great tire i always recommend it

[@Aleziss]

I wish to congratulate you for this video with actual shop sounds instead of music, very well done with no annoying music

[@denisfedotov3013]

Просто взрыв мозга, насколько всё продумано в этом техпроцессе,просто невероятно,и людей практически нет на линии

[@анатолийАН-м9к]

@6896829 Россия вторая после Китая по производству шин (именно производство заводы)...

[@طاهرخليفه-ف7ظ]

فخر الصناعة الكورية الف الف تحية من العراق

[@deltavee2]

Nice to see a process I've always been curious about laid out in front of me. The Vietnamese factory is impressively clean. The tires are also made in the home of the business, South Korea and also the U.S. I also liked seeing some of the comments below talking about the quality and reliability of the Kumho tires. Why? The Can-Am Spyder RT I bought last August came with three new Kumho tires on it and I do like to make my motorcycles earn their keep so good rubber is a must. The bluidy alloy rims seep a bit of air as they are wont to do but the tires have performed spectacularly so far. Also, Bombardier recommends Kumhos as replacements and supplies them as standard on their new vehicles. The ABS, traction control, skid control and the single pedal computer-controlled braking are set to use them best. The whole machine is fly-by-wire with a 1,000cc fuel-injected 100hp Rotax engine. Bombardier liked the Rotax engines so much they bought the company over in Austria. A good Canadian/Austrian touring machine made in Canada about 250 km from where I live...with quality Asian tires to boot. Now if the dang weather would smarten up....

[@maxwellcrazycat9204]

As a former auto mechanic I can say that mixing brands of tires on a vehicle with traction control can cause havoc on a traction control system. Same stated size but slightly different.

[@AndyTN64]

Its Japanese manufacturer in Vietnam

[@deltavee2]

@@maxwellcrazycat9204 Mixing brands...absolutely. But what if I change all three to stickies? Will that make the computer go cross-eyed? Would the change of compound make a difference?

[@deltavee2]

@@AndyTN64 Nope, sorry Andy. Wikipedia and others say: "Kumho Tire (formerly known as Samyang Tire) is a South Korean tire manufacturer. It is a subsidiary of Chinese tire conglomerate Doublestar ." Damn! I'm riding on Chinese rubber. I boycott China totally. Now I have to find a brand that will work that is not profiting a dicktator.

[@davidhan9979]

I don't remember exactly but after Kumho changed owner ship to Chinese company, the quality is not the same

[@parrsnipps4495]

That is an amazingly complex process with most of it automated. That one machine that took a rubber circle and in one final step, stamped the tread and other markings but you couldn't see what was going on inside - then out popped a finished tire. Really impressive.

[@emag7837]

The "green" tyre is put into a mold and the rubber bladder inside got pressurised with steam to around 10-20 bar (atmospheres) and the tyre sink in to the inside of the mold and vulkanizes under heat, probably around 160-200 deg C. I guess it would take 10-20 minutes for a car tyre. A really big and thick tyre take many many hours. You can see the inside of mold that hold all the shapes that imprints on the tyre.

[@lucmarchand617]

Very clean factory that is big plus for production staff. Well done

[@IWBFREE]

One word ! Keep it Going 👍

[@seung-nampark8265]

very interesting process for good quality of tires. Wow fully automatic factory! This video teaches me that the factory movement to Vietnam is not only because of labor cost in Korea, but also because the natural rubber material is still used. I just have thought that all the tire raw matetial is coming from any by-product during the petroleum process.

[@tlsvd5842]

France used to have hundreds of rubbers plantations in Vietnam in the early 1900 for their Michelin tires company, nowadays there are less rubbers plantations because of the population grow and people need lands to live

[@groovyone5492]

This factory is cleaner than most British food manufacturing facilities. I like the way that the plastic wrapping on raw-materials in incorporated into the product.

[@Digmen1]

Yes I noticed that, they dont even take the plastic wrapping off.

[@CoreyChambersLA]

That's probably what makes the tires fail miserably, as they instantly herniate in hot weather.

[@broderp]

Kumho makes excellent tires. Nice to see how my tires were made.

[@alainmare8081]

Broderp good but not the best ! Two leading brands are Michelin and Goodyear.

[@지구용사-v8n]

korea NO.1

[@VUCUONG1079]

I used to work at this Kumho factory in the industrial park of Vietnam Singapore VSIP ii Binh Duong Vietnam a while ago, now watching the video, I miss the memories of that time so much.

[@Lacronh]

Do you know what the white liquid was at 16:00 that was rolled onto the inner rim and why?

[@VUCUONG1079]

@@Lacronh It's a liquid, a solution applied to it to check the air tightness of the tires...

[@Lacronh]

@@VUCUONG1079 Got it, thanks!

[@XZhao-rk9tr]

@@Lacronh No. The answer is not correct. It is soaping liquid, that help to mount tire in the rim so that any measurement of tire can be carried out. For example, Geometry and Uniformity.

[@mariuskuhrau761]

I was told Kumho Tires are a South Korean company, but it appears that they now have a modern factory in Vietnam. 👍

[@당근마스터-c5o]

Kumho Factory in korea produce more premium tires. Like majesty 9

[@johnbrookhaven7134]

korea is relative with vietnam,, Vietnamese people have minor Haplogroup O2b in their DNA that's found in Koreans

[@ohdeerme]

Excellent video showing tire production from raw material to finished product. Quality control in this plant is unbelievable. Vietnam produces some fine products today !

[@psmaj53842]

금호호타이어가 배트남공장이있엇군용

[@CatalinaMcpherson-s6q]

Excelente Pneus, esta marca esta presente aqui no BRASIL tambem.. That's really a beautiful well run well maintained manufacturing facility !!.

[@lomilloso]

Here in Argentina, we have a factory that uses almost the same system, not as updated. I have worked in it for 34 years but in Energy Services. The factory is called FATE (Argentine Factory of Glued Fabrics). I like this video.

[@MyEyesBled]

I use Kumho tires on all my cars … they’re amazing!

[@이명진-w7s]

최고

[@2packs4sure]

That's really a beautiful well run well maintained manufacturing facility !!

[@earthelder2065]

WOW! that is an amazing process! We appreciate the hard work the Korean people put into making these tires. Thank you for sharing this great video!

[@daklakdigital3691]

Fascinating how automation has been applied. Next challenge is disposing of tires after their useful life is ended. Thanks fot the video so informative.

[@richlevenson6605]

I was an assessor who had been to the Bridgestone-Firestone Tire plant many years ago, so I certainly appreciate this excellent video. The plant was over 57 acres under a single roof. The largest tire made was 12 feet in diameter for mining trucks.

[@aurktman1106]

I’m a big fan of Kumho tires, I put them on my C300.

[@ILOVEBACONBOY2018]

Thanks for this!

[@stevensims3342]

It's strange when you are impressed both by the thing being manufactured and curious how the machines making them is made 😮

[@Erik-oe7gc]

I’d almost consider buying them, now.

[@DrFiero]

I'm sporting at least one set of Kumhos on one of my cars now. Always been impressed with them.

[@DrFiero]

Couple of the tires shown were even the right size! :D

[@DoutrinadorReal]

The tire factory here in Japan is not so organized and safe. Congrats Kunho!!!!

[@TimPost-sh1zw]

😂 welke fabriek in japan werk zelf ook in een bandenfabriek vredestein

[@rooppradhan5314]

High technology very modern way very good well done. Sign of a developed nation.

[@bobeskance8965]

You don't really think that the Vietnamese invented and created these machines and this tire making technology do you?

[@scottbush8767]

Very well done video of the tire building process. I worked for a tire company for 25 years.

[@edwardgabriel5281]

I worked for the Armstrong Rubber Co. in 1953 as a maintenance mechanic. They made tires for Sears Roebuck (All-State Tires) I assure you the tire builders worked like crazy because of piece work rates and it was blazing hot in the heater room where they cooked the tires. I'm 95 but remember well.

[@Lacronh]

Do you know what the white liquid was at 16:00 that was rolled onto the inner rim and why?

[@scottbush8767]

The white liquid is a lube and helps seal the tire when they "force" or check for the high spot of the tire hence the pink dot on the side of the tire. This is matched up to the rim when the tire is mounted on a rim.

[@Lacronh]

@@scottbush8767 Ok, got it, thanks!

[@edwardgabriel5281]

@@LacronhSilicone to make it slippery

[@박상도-n4s]

타이어는금호가최고쥬❤

[@MAXProcess]

By the way pretty good tires I had a winter tire KUMHO lasted pretty long 5-6 seasons

[@prris28]

только Hankook

[@nguyentanhien7184]

Ngạc nhiên khi hôm nay lại thấy video này, tôi làm trong nghành sản xuất cao su tự nhiên ở bộ phận kiểm soát chất lượng (quality control). Cảm ơn vì đã làm video này tại Việt Nam, tỉnh Bình Dương cũng là một nơi có nhiều nhà máy cao su tự nhiên, mọi người có thể nhìn thấy dây chuyền máy móc hiện đại nhưng công nhân nhà máy cũng khá vất vả và những nơi này sẽ có mùi khá khó chịu cho những người mới đặt chân đến.

[@qzorn4440]

Very true.

[@longhuynh4361]

Cảm ơn thực dân Pháp có tầm nhìn xa va chiến lược tạo dựng nền móng cho xã hội phát triển sau này , chỉ ít hơn 100 năm

[@dubiousName]

Imagine working in that factory, the smell and the noise 😢. Hats off to those workers!

[@grandmapamm]

I love watching how things are made it is so interesting. I recently had to buy new tires for my car it is hard to believe so much work goes into making them.

[@tac6044]

I make cat.

[@_HMCB_]

Same. Bought tires last week. They were expensive but now I appreciate the time and engineering that went into them. As I drive my car tomorrow, I’ll be thankful of everyone and everything that helped make it possible.

[@qzorn4440]

Times are changing. The old tire companies will not change on their own. Like resisting the radial tire design. Many tire plants are ran until the machines fall apart. So quiet and clean, how long has this plant been in operation it looks very new. I did not see the X-Ray machines, just run-out force machines? 😎 Great video. Thanks.

[@sasuke1212naruto]

not wrong, I work at toyo as a tire builder and I can confirm you run it till it breaks.

[@82363]

Automatic machine,機器全自動化，生產效率高

[@grdtfgd]

타이어는 금호지 👍

[@mvnorsel6354]

3 months ago bought 4 Marshall tyres, the cheaper version of Kumho, satisfied.

[@alexanderSydneyOz]

I don't suppose this production line is particularly complex in the world of manufacturing, but even with this, it is amazing how humans can design and construct, and interconnect long chains of machines like this.

[@ekop1778]

HAAA KUOMO TIRE BETTER ALLWAYS YEA RIGHT PROBABLY LASTS MONTH BEFORE BLOWUP

[@YourBoy-V4]

Yeah these factory machines are more powerful 😪

[@ottopartz1]

Amazing how few humans are involved in the process!

[@floorpizza8074]

@@ekop1778 If you do a bit of research, you'll find that Kumho tires are very highly rated. And they're proud enough of their product that they are willing to allow someone into their manufacturing facility to film the whole process. Do you find any of the major tire brands allowing filmed factory tours?

[@JP-vs1ys]

one of those videos you don't want to end!

[@__oey]

최신 설비로 빠르게 제작 되는 금호 타이어 공장 멋지네용 베트남에서도 금호 타이어 많이 사용했으면 좋겠어요!

[@HuyTranHuy-dn6jt]

Brigestone , continental , goodyear tire are beter

[@신명-s8w]

​@@HuyTranHuy-dn6jt가격이 비싸잖아요

[@myongkim7299]

@@HuyTranHuy-dn6jt expensive tire

[@Rich77UK]

I have bought Kumho tyres for many years on many vehicles. Very good quality imho.

[@imamtasdemir4312]

Tek kelimeyle muhteşem tüm çalışanların ellerine sağlık iyi çalışmalar diliyorum sizlere 🇹🇷🇹🇷🇹🇷🇹🇷👍👍👍

[@PTRRanger951]

Interesting. I was a Deputy Sheriff in Nevada and we used Kumho speed rated tires on out Police Interceptors because they are way cheaper than the Goodyear Eagles. We would put about 40-50k on them before we had to change them out. Would often have times where we would drive at 130MPH for 100 mile stretches and never had an issue with them. When we first went with the tires we were mounting them on a rim and I saw they were made in Vietnam. I was mounting them for another deputy who happened to be a Vietnam Vet and he was “Well they couldn’t get me then, so this is how they are going to get me”.

[@brianhlee4781]

This is Korean company in Vietnam. Dont worry.

[@davidjacobs8558]

@@brianhlee4781 Korean soldiers fought along side US in Vietnam War.

[@terry_willis]

@@davidjacobs8558 Not exactly along side but they were definitely there and their "rules of engagement" were to shot and kill anything that moved (i.e. take no prisoners).

[@philc.9280]

Just loved watching the step-by-step technical process. I can imagine how dangerous all the fumes coming off the molds.

[@かーくん-k1i]

ベトナムには　安全と品質管理を第一に製造業で発展して欲しい

[@screwsnutsandbolts]

Amazing process. Great video ! 👍

[@Dani-it5sy]

Wow that was really interesting. So different from what I expected. I always thought for example that the profile was cut out by a machine somehow 🤔 And good to see all the quality control 👌

[@mariuskuhrau761]

@Far Window Damm man, the title did say Vietnam Tire Factory. 🤣

[@skyyoonbong3551]

@farwindow kumhotire vietnam plant

[@thev5140]

never believe in Vietnamese technology, under the rule of uneducated communists, people have no knowledge, because communists want people without such knowledge to easily rule .

[@ArvinCastro]

Yeah, me too. I though it was cutout but now I see it's actually molded.

[@oumenos]

Very clean factory !

[@hoonsuh6345]

Very impressed especially with the marking process on the tire for future balancing 😊😊 I didn't know there is such a colored mark on my tire

[@richardmartink679]

It’s the high or low spot for road force. Not sure which but one of those. It’s to match mount to your wheel to improve overall uniformity

[@yindyamarra]

I could sit there all day watching those lines get painted

[@LV4TD101]

I'm really surprised how clean the factory is, I always assumed a tire factory would be a dirty place to work in

[@zekevarg3043]

It used to be.

[@difsdice9267]

وش

[@kevinjackson6387]

A lot still are

[@michaelkenny8540]

The 'dirt' is the carbon black. A very fine powder that gets everywhere.

[@uk7301]

금호 타이어 ~! Good !!!

[@pilotofuracao2989]

Gostei parabéns pela produção do vídeo. De recife Pernambuco Brasil um forte abraço pra todos 😎👏🏾👏🏾👏🏾👏🏾

[@Cassie-xh4ju]

your videos are a breath of fresh air in my feed!