How-To: Massey Ferguson 2650 Clutch Replacement

[@John-Rayburn]

I have a 2680 HD and the clutch will not disengage completely. Going to start on it this evening and so glad I found this video. There's not a lot of videos like this for 2000 series Masseys. Thanks for posting this, very helpful.

[@jonsmith7109]

Thank you for filming this. Just a wonderfully clear video

[@robmiller2919]

Yes , definitely need part 2 of 2000 series.

[@SirRodericSpode]

Thanks for the video and taking the time and effort to share. (Please be aware that venting R134a is bad practice and often prohibited in many countries due to o-zone damage, so take the time to recover it)

[@roc31539]

Most impressive skills. No small task. Thanks

[@ericlindal8008]

Great job! You make it look easy.

[@krisostash3513]

Don't need to gas the ac system off. You can unbolt the condenser and the compressor and fold everything into the cab.

[@jonsmith7109]

Smart.

[@dominickamuchele3032]

Great idea!! Thanks.👍

[@cineminded]

This was a very nice and clear video , thanks !

[@hubertrobinson8825]

In the repair manual it shows 3 T shaped bolts use to compress the pressure plate before unbolting the 6 bolts holding it to the flywheel

[@joepiette]

Thank you so much.

[@dhoutdoorvids6674]

Is there a way to check or adjust the clutch without splitting the tractor? I have a 2680 and the clutch pedal is not engaging until the very end of the stroke

[@greenhillgarage]

Hey Clint, I found your channel when you started that Massey Ferguson 2000 series powershift teardown. Did you ever fix it and how did you do it? Any advice is appreciated! Thanks! Greenhill Garage

[@robertnavarro9799]

Hi Is your clutch alignment tool a 23 sprains I can find one for my 2640 Massey

[@farmgpa]

Mine is a lathed shaft that fits into the clutch disc and then lathed small on the end to fit the pilot bearing, it does not have any splines.

[@Tsiogkas]

We need part 2 of the mf 2000 series powershift

[@michaellopez6134]

I just finished installing my clutch and for some reason the clutch pedal is sitting on the floor. How do i adjust it.

[@farmgpa]

Did you replace the pressure plate assembly. if so did you take out the three bolts that hold it compressed for assembly. Otherwise the adjustment is on the out side.

[@michaellopez6134]

How much do you charge for a job like this?

[@Ranchready496]

Hell of a job! You made it look easy!🫡👏🍻👍