THANK YOU!!! (For this, and the mixing video) As some folks have said in the comments, you absolutely can add a lot more to these processes, however, the billion and a half videos I've watched so far contained wayyyy too much information for Mr. Beginner over here to take in. This is exactly what I was looking for.
@gardengit2 жыл бұрын
Thank you so much … this was the video !! The first one who really helps with this problem of recording at home… followed all your steps…and here we go… so great !! You are the first one that helps with this, and not showing off the whole technical side so that no one can follow…perfect for us musicians who are of course NOT audio engineers….education like this needs a great talent…you got it !!👍🌟best wishes
@TheFendertak3 жыл бұрын
Hi I did read the comments below firstly, and one comment was there's a lot more to mastering, in answer I fully agree, but Paul in all fairness has paved the way for beginners, recording a song can make seconds minutes and hours just pass you by so bloody fast, it's nice for someone like Paul to come along and make things just that little bit more straightforward to grasp the basics, I would like to know what he used for the drums, and how there were layed down, a good video on SD3 explaining, again I say, the basics, I think Paul is doing a super job, and I for one hope he continues with more videos 👏👏⭐⭐⭐⭐⭐
@cesargamas092 жыл бұрын
I don't know if you are doing more videos but today you save me big time!!
@OasisFirefly3 жыл бұрын
This video is what I've been looking for. Subbed.
@PaulDouglasMusician3 жыл бұрын
Thanks! Glad you found it helpful.
@ttguitarstringstt15503 жыл бұрын
Good addition to your mixing video. Very helpful information.
@jetclipsAU3 жыл бұрын
Excellent video Paul! Just what I was after. thanks!
@PaulDouglasMusician3 жыл бұрын
Thanks. Glad it helped!
@jaffaralali28702 жыл бұрын
THANK YOU!!! (For this, and the mixing video
@MartyNo13 жыл бұрын
Thanks for explaining all this.
@offthecliffmusic2 жыл бұрын
Good tutorials. Very helpful
@WiKiTWoNKa Жыл бұрын
AMAZING!!! Thank You!!!
@z7wx3383 жыл бұрын
Thanks, Paul!
@MrPopalosus3 жыл бұрын
Thank you. Very Helpful !
@ThomasJackMoore3 жыл бұрын
Great job.
@cliffordjohnson943 Жыл бұрын
Thank you 🙏🏾
@blessmusicdaily2 жыл бұрын
Thank you so much!
@freedommusic85973 жыл бұрын
Great video!!
@phoenixmediaforge2 жыл бұрын
I mix on a console (with console automation), to a stereo track in Reaper. I master that track in-place in Reaper. You can hear an example of this workflow on my channel (my mix of a Boston tune). Sometimes I use a standalone application but most of my mastering is done in the same project.
@davelanciani-dimaensionx4 жыл бұрын
Very simple, and I already have the LOUDMAX plug-in. Gotta try it.
@PaulDouglasMusician3 жыл бұрын
Yeah, it's a great little plugin. Since I discovered it I do all my mastering with it.
@claragary4 жыл бұрын
Thanks!👍
@PaulDouglasMusician3 жыл бұрын
Welcome!
@michaelcavemusic9199 Жыл бұрын
Thank you for the video! Should you worry about the song you master sounds great on monitors, but not on tv and phone speakers?
@TheTimeProphet4 ай бұрын
Surely you should use a compressor before using a limiter?
@chrwrd29602 жыл бұрын
Thanks for this great tip! Can you make also an advanced mastering video like "theeveralstingspiral" proposed?
@bo1ivarj3 жыл бұрын
Thanks for the info. What format is best for rendering the original mix to bring into the mastering project?
@derekcleffi64762 жыл бұрын
Year late but keep it the same as the format your gonna do your final render with. A project should always stay in the same format, but you can change which format you want to use before you lay any tracks down.
@gabrielamaral9363 жыл бұрын
You are cool!
@RolandDeschain1 Жыл бұрын
Pushing the volume that far is kind of pointless these days, since the streaming services will turn it down anyway.
@KlausPercussion Жыл бұрын
don't agree....because the other way around is not true...if your song is slightly to silent they won't turn it up for you...hence it will sound less full compared to othersounds (and therefore less good to the listeners)....so you should take control an bring it to thr right level beforehand
@zacharygreenawalt71192 жыл бұрын
I thought this video would be wayyyyy longer than a limiter and a VU meter
@rhythmjones3 жыл бұрын
This video is "How to use a limiter during mastering." There is much more to mastering than limiting.
@drcool563 жыл бұрын
It is a good start though ☺️
@BluesLicks1013 жыл бұрын
Where is your mastering video genius? Seriously... you really felt the need to come here and gripe?
@jimis31673 жыл бұрын
You have to make a video on how to combine all tracks into one track to a new project.. I know how to do It in the same project but what do you do to combine all tracks into one and create this combined track at a new project?
@PeteRoulston19783 жыл бұрын
I think it's just a rendered wav file of the original tracks
@jimis31673 жыл бұрын
@@PeteRoulston1978 Yes, that's what I do eventually, thanks!
@fvcktv29333 жыл бұрын
I have different sections from my master track with different gain levels, how do i get it even in reaper?
@souldeep8083 жыл бұрын
I couldn't install LoudMax limiter. It says it's a "Proo Tools Plug in
@tomwills23093 жыл бұрын
I’d say it’s more maximising the level of your mix rather than mastering. There was no compression or EQing done which is an important part of mastering.
@kudus92352 жыл бұрын
In point.
@truthprevails4895 Жыл бұрын
Yes, but he's doing this video on the heels of his mixing video. If your mix is solid, you don't need a lot of EQ tweaking. Also, this is clearly a beginners video, which I appreciate. It's not helpful for me to watch an advanced mastering video at this point with all the terms I don't know. I appreciate this video for what it is, not what it isn't.
@mikea32732 жыл бұрын
Very helpful, thank you! I won't subscribe right now because you have 6.66k subscribers, and that's too rock and roll to fuck with. But I'll be back ;-)
@matthewpejovicmusic10193 жыл бұрын
Is a limiter similar to a compression?
@jamesmiles33413 жыл бұрын
Yes limiter is an extreme compressor
@kaveiros754 ай бұрын
So... all you do is throw in a limiter, bring the threshold down and... voila! I am a mastering engineer! What a waste of 10 minutes!