How to Measure & Install Concealed Hinges on Cabinet Doors

[@CharlieDIYte]

🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. Help support me on Patreon -www.patreon.com/charlieDIYte (includes Discord access).

[@brianheney8063]

Brilliant work Charlie the most thoughtful I've seen. Thank you for your insights.

[@cwhyte153]

I stopped watching after 30 secs...FFWD video to 10 mns , and the hinge was still not yet installed. I CAN'T understand why people talk so much! Why can't they simply get to the point!

[@abdullapppdadshah9497]

@@cwhyte153 0

[@CharlieDIYte]

@@cwhyte153 You'd understand why if you watched the video. 😉

[@scrumpadelic]

@@cwhyte153 everybody's different! Some people like long explanations! Now you understand! Stop whining!

[@415hispfemale]

After researching for days, yours was the first video/article I found where the thickness of door in relation to the cup hole is addressed. That, and every other detail you’ve gone over make this by far and away, the BEST instruction ever on the web!! Thank you so much!!

[@northavealum]

Charlie - after 25 years in the house, my European hinges in the kitchen have succumbed to the abuse of 4 kids - so, I find myself needing to replace the hinges on 27 cabinet doors (well not all need it, but I'll take the opportunity to upgrade to soft-close hinges) - with many of them requiring repositioning to deal with damaged MDF around some of the cups. I've watched several KZbin videos & your video is by far the best - I now am not freaking out over where to find the best hinges w/ soft close, and all the work to install them without screwing up. Thank you for the really detailed video on how to do it - including walking through the brochure, using a jig and a mockup. My blood pressure is now quite a few points lower! Great job.

[@raminybhatti5740]

Arguably the best KZbin video on this particular subject. I'm currently planning to make and fit a medium-sized door for a space underneath the stairs using concealed hinges (inset), and I've learnt so much thanks to this video. Great stuff.

[@deanaoxo]

First, thank you. Second, why on earth did anyone click the thumbs down? Third, helping me through a 105 page document, good grief, priceless. Mock ups rule. This is my first commercial cabinet build, and your video is one of the best. I'm going back to the drawing board, and hopefully ordering all my hinges today.

[@christophercharles3426]

You're the man...!! Subscribed.. I'm a decorator by trade and been let down by someone who owed me a favour prior to this virus going on.. can turn my hand to most things and doing everything myself... having to make a unit I avoided this method as thought I'd wreck the MDF door.. but couldnt believe how easy and accurate it was following a couple minutes of your video.. you saved me getting more stressed..many thanks hope you and family stay safe at this crazy time..

[@CharlieDIYte]

That's brilliant news Christopher, and massive thanks for taking the time to let me know (and also for subscribing). I agree. They're a joy compared to traditional hinges. I'll be using them again on a big wardrobe build some time over the next few months. You too - it's mad at the moment isn't it!

[@mattanderson2053]

many hours of research crammed into 21 min. best video on you tube that demonstrates how to fit these hinges. Thank you!!

[@CharlieDIYte]

Matt Anderson Thanks Matt - really appreciate that - thanks for taking the time to comment.

[@joseenriquesanchezobaya2507]

Matt Anderson yy

[@tomcantwell4216]

Agree with Matt! Thanks for this

[@salz118]

I am building a rather large buffet with three inset doors. I plan to use these same hinges for the first time and have been quite nervous about screwing it up. I like your suggestion about doing a mock-up and will try that. Thank you for taking the time to painstakingly document your experience and trials and errors. You have helped me more than you know and I am grateful.

[@SJ-mn5cz]

As always great content. This guy has got to be one of the best DIY video makers. He seems to understands his audience and pitches his explanations at the right level.

[@louisscott1063]

I am in the usa & 77 yrs old and have always stayed away from those because I did not want to do the research. not very familier with internet but you make me think it is do able Thank You

[@ianamck]

Charlie you are a genius. I think I was going through the same pain you did trying to find the right answers. But everyone speaks gobbledygook until you start to get your head around reveals, cups, types of frames etc etc. No one makes it easy for what should be pretty straight forward. Its not the first time I have bumped into your videos and this one has been a life save before I completely gave up and used some ugly ass butt hinges. THANK YOU

[@dufftime]

Just wanted to say "thank you" for making this video. I consider myself pretty handy, but 100+ hours into a walnut cabinet build, I wasn't sure exactly where to drill. I had a pretty good idea, but wasn't sure until I saw your video. I also made a small prototype out of scraps to convince myself.

[@mrabimohammad9280]

Thank u ,,, I have worked with carpenters and asked about how to do it and the only thing they say oh it’s so easy and no one would tell u how to do it , don’t know why .. thank you for ur time mate and effort to help make it easy

[@coreybolden9841]

Many thanks! I was helping a friend clean out a garage and found a bunch of hinges like these. Had no idea what they were even called! Now I know how to install them correctly & now I can use them for my upcoming cabinet projects. 😎😎😎😎😎

[@CharlieDIYte]

You're welcome. Thanks for the comment!

[@Photomomlove]

Charlie, I am happy you found an audience here on KZbin. You are clearly an amazing instructor. Clear, precise and to the point. Fantabulous! You took away all my apprehension installing a 170 degree Blum hinge.

[@CharlieDIYte]

Herma Ornes Herma, that's so good to hear - thanks so much for taking the time to comment (and so eloquently!)

[@garvielloken3929]

This hands down is the best video on concealed hinges and on navigating that monstrous blum website - Thanks charlie!

[@CharlieDIYte]

Thanks Garviel. I revisited this in the final video of my wardrobe build bit.ly/2UfXY4B 👊🏻

[@jenniepost7837]

Best content I’ve found on installing concealed hinges. Thank you, especially for the tip on finding Blue’s instructions. The one’s that came w the hinges were awful for a first timer. Only remaining question is how to hold door in place while marking where plates need to go.

[@CharlieDIYte]

Thanks Jennie. Here's an update kzbin.info/www/bejne/qpWwn6Ghq66hqKcsi=JU03CwXjqaf48AYg Depending on how far off the ground the door is, these are game changers - used them in last week's door hanging video amzn.to/4hpwwYi

[@HoudalothAli]

Charlie you get by far the best British DIY KZbin channel. I find when searching, a lot of US videos pop up, which is not useful.

[@30eesh]

great tips...the best thing about the video ...no music..straight and clear talking....and like you mentioned tools than anyone can afford to pick up for a small project like this...thanks.....cheers...

[@CharlieDIYte]

Marc Peters Thanks Marc - glad you find it useful. I used to put music on my videos - which was a big mistake!

[@JAHManeShaker]

This video is SO helpful. I'm just about to build a cabinet to cover a boiler out of some old IKEA wardrobe parts I got for free. They originally had sliding doors so there were no holes cut for the concealed hinges. I was dreading doing all the maths to figure out where to drill the 35mm holes so this video will be my reference through the whole process. Thanks Charlie!!!

[@CharlieDIYte]

Funnily enough I've got a load of doors to hang for my wardrobe build, and I've just rewatched this vid to remind myself how to do it 🤣 I've bought no fewer than 3 template tools on the internet, including a Blum one and no-one of them have the holes in the right place so I'm afraid it's best to work it out yourself based on the hinges you've bought.

[@francisco.soeiro]

Just want to say thank you very much for showing us the whole process. Perhaps manufacturers should be referring to this video on their websites. Thank you Sir

[@CharlieDIYte]

Thanks Francisco , I really appreciate that 🙏👍🏻

[@nikcrosina]

love the blum kitchen stuff, they are really the best in the market. I built a kitchen from scratch 12 years ago and ued them exclusively, and it worked all extremely well!

[@CharlieDIYte]

They're awesome aren't they. I used them again here kzbin.info/www/bejne/qpWwn6Ghq66hqKc

[@nikcrosina]

@@CharlieDIYte its the precision of them all, and quality - a joy to work with!

[@lindapearson2677]

Sorry Charlie I think I clicked the wrong button by mistake. I think this is the best instructive video I have seen online. It is excellent, well researched and clearly explained. Thank you for sharing your knowledge. Linda

[@CharlieDIYte]

Thanks so much Linda. There's a bit of an update on the hinges in this one if you're researching this for your own project kzbin.info/www/bejne/qpWwn6Ghq66hqKcsi=xO73fspNK0BtCFu2

[@benburkhart3727]

Very informative video I have 80 hinges to do so i bought the kreg concealed hinge jig but showing how to find info for the blum hinge was very much appreciated thank you

[@riaz1555]

I have to say the details you have put into this video are fantastic. These hinges can be stressful to deal with and I really appreciate the effort it took you into making such an informative video. Many thanks Charlie.

[@CharlieDIYte]

riaz1555 You're very welcome. Thanks for the comment!

[@cliffhillquist2377]

I've dabbled in installing these hinges for years. I've never known how much detail was available until watching your instructions. Thanks so much for your time and research. I'm now a lot wiser. Cliff

[@CharlieDIYte]

Thanks Cliff. I was exactly the same, but I kept seeing them on jobs I was working on, and decided I had to give it a go. With the massive scope for adjustment and soft close functionality (removing the need for door magnets etc), I don't think I'll be going back to flush/ other hinges!

[@dwaynesklapsky]

This video was perfect for me. I built shop cabinets and then sought out any used hidden hinges I could buy cheaply. As a result I ended up with hinges I knew nothing about. Fortunately they were Blum but I've yet to determine exactly which they are so I can decide how best to install. Your video is helping me this.

[@CharlieDIYte]

You're welcome Dwayne. Apparently they've got a help line which is pretty good, so you could call them and get them to identify exactly what you've got any what they can be used for.

[@themongru]

Great video, tried installing these thinking it will be a piece of cake and it was a real pain. Funny that the information for concealed hinges was well concealed. ;)

[@alisonsalt5149]

Totally agree with the comment from Matt Anderson. Professional and comprehensive. I'm making my mock-up doors as I watch.

[@CharlieDIYte]

Thanks Alison - I really appreciate that. You'll love these hinges!! 👍

[@obquest]

Until now, I classified concealed hinges to the realms of manufacturers’, CAD/CAM but now I’m confident, it is a DIY job, thanks to your research and Blum. I’m going to give it a go when I refurb’ the kitchen. Another great video. Thanks, Charlie.

[@CharlieDIYte]

Thanks. Check out this update too if you have a moment kzbin.info/www/bejne/qpWwn6Ghq66hqKc 👊

[@chrismiles6375]

Charlie, your advice to do a trial fit of the hinges on scrap wood is INVALUABLE. Once done you can see how they work, and then work out, first whether you should change any of your measurements BEFORE you actually cut into your doors, and later how to adjust the doors. So much easier to do with the trial piece. Thank you so much for the tip, and to everybody about to fit hinges for the first time, follow Charlie’s tip...DO A TRIAL ON SCRAP WOOD FIRST!

[@MrFlyingguy]

i was looking for a refresher on distances from edge verus reveal and you are about the only english spoken one that covers this comprehensively, i'm off to wickes now! thanks. great video.

[@CharlieDIYte]

Cheers mate and good luck with the project!

[@stevecolbourne8537]

Well done!, I have been trying to sort out what I need and how to do it for the last two years. As you said, there is not a lot of info out there I started watching and then you said we have been watching for 19 mins, I couldn't believe it. Fascinating.

[@CharlieDIYte]

Cheers Steve - really glad you found it useful!

[@thegoodraj]

I sat through and watched it all. I feel like there should be a name for when you reach that point in life when you watch a video about hinges on new years eve, for fun. Great video by the way!

[@CharlieDIYte]

But if you're researching your own build, it's time well spent. If not, then I'm just grateful you dropped by. Happy New Year! 👍

[@CharlieDIYte]

I thank you 👍👏

[@bradjones5266]

Just had to write you a quick note. This is an awesome step by step video....love it Charlie! Thank you

[@CharlieDIYte]

Thanks so much for taking the time to send that Brad. Really glad you found it useful! I'm just about to start a major wardrobe build so keep an eye out for that 👍🏻

[@peterbell5491]

Charlie, thank you for doing all the leg work for us budding DIYers. I was initially looking at your video of how to build your own circular saw guide track and stumbled on this excellent tutorial. I've bought myself a pack of 10 overlay hinges and was wondering how I'd get on. Thanks to your tutorial it should be a cinch, just a slight different setup. Keep up the great work 👍

[@davidlaidlow1419]

Thank you so much Charlie.I'm a Brit in New Zealand, and have worried over my ability to use these hinges for ages.You make it so simple.Well done.

[@mumumuesli4448]

Hey Charlie, Great job, way past super professional! I installed a ton of these about 8 years ago, and as I tuned into the brochure on concealed hinges I was getting slightly overwhelmed using my brain power to re-connect to the intense specificity that Blum requires, This video was so VERY helpful in calming me down and YOU NAILED IT!! Thank you, great job, great articulation, fantastic deliver and super clear video work, thank you!!

[@CharlieDIYte]

You're incredibly welcome! Thanks so much for taking the time to comment - it means a lot. It takes an age to film and edit these videos, and yours and all the other positive comments help convince me to keep going! Like you, I took an age researching how to fit these hinges. Some of these jobs look pretty intimidating but the point I'm trying to put across on my Channel is that anyone can do it if they put their mind to it, do the research and have a little help from people like me! Thanks again!

[@rafiutaoheed6516]

Fantastic video, I watched the video before, couldn't understand very well and then after purchasing some hinges and checking them out, I rewatched it and now I'm about to go try out my luck. Wish me luck on installing of my first concealed hinges

[@CharlieDIYte]

Good luck Rafiu. I'm sure you'll ace it 🤞🏻👍🏻

[@bofrjojo]

you made it very simple and not adding too much dialog. thank you, john

[@CharlieDIYte]

bofrjojo Thanks! Much appreciated!

[@wmurphy1979]

Good job. Blum are fantastic I contacted them about an old door mounting kit for magic corner in a kitchen that had broken it was about 10 years old. They sent me whole new kit and wall charts for all la you laying out and set up. Very classy outfit

[@dph9885]

Thanks Charlie - absolute superstar. Probably saved me an evening just on getting that Blum PDF - or even worse if I'd missed it I could have made a real mess of my new project. Great tutorial and whilst long - no fluff! All solid info.

[@CharlieDIYte]

DPH You're very welcome mate. Really glad you found it useful and massive thanks for taking the time to comment!

[@pilateswithhazel2439]

Thanks for this. I'm new to DIY and this helped me put a cabinet door on in my kitchen. Cheers! Couldn't have done it without this video!

[@CharlieDIYte]

That's great news. Thanks for the comment Hazel!

[@nicolalonsdale7428]

So helpful! We had such a nightmare with some hinges but feel much more confident for our next project now.

[@CharlieDIYte]

You're very welcome Nicola and here's an update video of you have a few moments kzbin.info/www/bejne/qpWwn6Ghq66hqKc

[@davidfarquhar3917]

Really helpful. My job is much simpler -replacing a broken kitchen cupboard hinge, but this video helped me understand how it all works

[@CharlieDIYte]

Thanks David. Glad you found it useful.

[@Stevesimmons2010]

Thanks Charlie, you answered questions I did not even think to ask! These are now my new favorite hinges. And you are my new favorite instructor.

[@CharlieDIYte]

You're very welcome Steve. Thank YOU for taking the time to comment. It always gives me a massive boost to get positive feedback like that, as I brace myself for the next onslaught of video editing 😉. 👍

[@equalibrium7898]

Well worth the 90 minutes. Very descriptive and helpful. I wish all the others would be like this as we all need as much info as possible. Thanks

[@lintonhusbands5657]

Excellent video, I can't tell you how much research I have previously done, all to no avail, regarding the spacing of the hinges - wish I'd had this info 6 months ago. Thanks again.

[@garybrumagin2490]

Although I've done a fair amount of woodworking in the past and have come from a career working in an Engineering department, not an actual Engineer myself though, these hinges were getting a bit baffling. Thanks for your explanations and pointing to Blum's resources. Both were very helpful in clearing things up. Well, I'll see how the install goes, but now I've got an idea at least. Thanks for your great video.

[@glennrudolph9867]

Thanks for taking the time Charlie, a great detailed video on Blum Hinges - you have saved me hours of Blum learning curve(s)!

[@CharlieDIYte]

You're very welcome Glenn. Here's an updated video with a few new tips kzbin.info/www/bejne/qpWwn6Ghq66hqKc 👍

[@ted6499]

Really great video Charlie , the fact it 20’mins long is good as it is packed full of info …. Thanks 👍

[@CharlieDIYte]

Thanks. There's a mini update here is you have a moment kzbin.info/www/bejne/qpWwn6Ghq66hqKc

[@philgarcia5552]

Thanks for your tutorial it made my three-day job a bit easier.

[@CharlieDIYte]

You're welcome Phil. Thanks for the comment 👍

[@FondueBrothers]

I'm glad I found your video. It's so difficult to get the correct information from manufacturers websites

[@daveweigle4090]

Beautifully done. The Blum brochures are very confusing and you have simplified the process very well. Thank you.

[@abdallahawwad1460]

Thank you ..I have asked a lot of carpenters and non of them helped and they all said oh it’s so easy ,,, thank you for this great video

[@dexslazenger6938]

Epic, concise and detailed have much better idea about these hinge type, as always research is key and thanks for the explanation. The beauty about watching Charlie is he make you want to try, I have a shed load of tools just sitting in a garage, well that's going to change. Not only have you inspired me you have given me more avenues for work, so for that I thank you.

[@CharlieDIYte]

Thanks so much, mate. Get those tools to work. Forget videos being epic, it's you who will feel epic as you survey your newly completed DIY 💪🏻👍🏻

[@mattliscott7323]

Watched this at 3 in the morning to put me out but the geezer's that straight forward and clued up I watched it all. Nice one mate I'll defo download that brochure aswell. Fair play to ya

[@calebgibson55]

The ability to move the door at 17:00 is brilliant!!

[@xerzius]

Armed with this excellent tutorial and a cheap jig for these hinges that sell for less than £2 (just search "kitchen cabinet hinge jig" on ebay) you cant fail with very acurate results. Yet another great vid Chaz...keep it up!

[@CharlieDIYte]

Cheers Mark - really appreciate that!

[@joshgomez3870]

I've struggled with these things for such a long time now. Thanks to your video I've finally cracked it. Thank you!

[@stuartb3502]

Great video as usual Charlie. I’m a very poor DIYer by comparison, but have one tip. I’m not sure if you’ve covered this before on your channel (I did try a search). Screws in MDF can pull out over time. One of my hobbies is installing car stereo and I learned that using screw in nutserts provides a much more secure long lasting fixing. I replaced all the screws on my amplifier rack and subwoofer cabinet with them. I’m not suggesting that they are needed by default for in house carpentry. (Vibration creates a different problem in a car). But I also have a bathroom cabinet which someone else built for us. The screws on the concealed hinge plates on that came loose after 3 years or so. It may be that they did not use enough hinges or there was some misalignment or they’ve absorbed too much moisture. I don’t know. But fortunately nutserts provide a cheap and easy fix. You can buy them for a few pence. You just drill out the hole a bit bigger, screw in the nutsert either with a hex bit or flat blade depending on type and then use a bolt rather than a screw to attach the hinge plate or whatever.

[@petesshed]

Hello Charlie, just taken stock of probably the same hinges you presented on your video and you've helped me enormously. Excellent and extremely helpful video. Many thanks and all the best

[@CharlieDIYte]

Many thanks Peter - really pleased to hear it's helped you, thanks so much for taking the time to comment!

[@floridahummer]

I'm about to purchase some new kitchen doors and make the cabinets myself, this video has probably saved me loads of heartache, many thanks

[@TheAlmostInteresting]

I've just finished hanging two doors using your method, Thanks for going in to such detail, it really helped!

[@CharlieDIYte]

Blueberryruby Really glad it helped. Thanks for letting me know!

[@Carman88]

Brilliant video I'm going to try and make built in wardrobes and this video gives me confidence I can actually hang the doors correctly haha. Thank you

[@CharlieDIYte]

Thanks Carman. You might find this vid useful too kzbin.info/www/bejne/qpWwn6Ghq66hqKcsi=7MEVkixINtSOsdPn and this is video no.7 in a wardrobe build series so if you start at video 1 kzbin.info/www/bejne/iGLHfKyYmb6sj5osi=ZCQw8BAXCCPReL48 and work your way through it'll give you a lot of info for your build. 👊

[@mrkennethporter]

Very grateful for your vids on this. And the other bespoke wardrobes. I am now planning a big DIY wardrobe job instead of paying IKEA. Respect mate.

[@CharlieDIYte]

Thanks Kenneth. I take it you've seen my most recent build (the 7 video series)? 👊

[@stephparnell8306]

Wish I’d seen this video before rushing out and buying “soft close door hinge” lol didn’t realise how many different hinges you could get 😂 but at least I know how to fit them now haha! Thank you!

[@CharlieDIYte]

Thanks Steph. There's a bit more info in this video on the install side of things kzbin.info/www/bejne/qpWwn6Ghq66hqKc 👍

[@cag9284]

I bought a little plastic marking jig from eBay, for about £5.00 it did all sorts of concealed hinges, both the bore hole and hinge side.....did all 60 doors and still going strong!!! For just a £5 it beats pissing about measuring and marking out.

[@woosheroes494]

Can u send a link to the jig u bought pls?

[@peres12345]

For example this: www.amazon.de/Hettich-Accura-Bohrschablone-Multiblau-351/dp/B00PXZU0W0

[@oscarcanales7552]

Hope you read my comment. Thank very much for sharing your knowledge with the public. I love the hinge jig. I will try to make a copy of it and name it “Charlie hinge jig”. Thanks

[@CharlieDIYte]

Thanks so much Oscar. I'd be really chuffed to know there was a jig named after me 😏 Here's an update video you might find useful, with a shiny new jig for the mounting plates kzbin.info/www/bejne/qpWwn6Ghq66hqKc

[@mariah4451]

A gift of a video. Ive got a box of old Ikea hinges that I wanted to use in the workshop I'm building from reclaimed wood and now I feel a lot more confident to do so. Thanks for sharing :-)

[@stamfordwoodworking2358]

Subscribed. Thanks for taking the time to upload this. I got a quote for £6 K to install a built in wardrobe in a bedroom (admittedly it is 6 m wide). Needless to say, I will be doing it myself. I was thinking of concealed hinges, so this was extremely useful on many counts.

[@CharlieDIYte]

Woodstraction Hi, many thanks for subscribing and for taking the time to comment. I was for quite a while too daunted to use concealed hinges but having taken the plunge I'm so glad I did. I'm sure you'll be the same! Take a look at my wardrobe building video kzbin.info/www/bejne/i2XdfY2lmM91qZI if you haven't already. You can construct the cupboard doors and drawers with pretty basic tools, without the need for sophisticated mortice and tenon joints etc. Takes a while and painting is a pain, but you'll have a constant reminder of your epic achievement when it's finished 🙂 Good luck and ping me a comment if you've got any questions.

[@stephenlwaters]

I’ve looked at 15 of these videos...yours is by far the best! If you are ever in New Orleans I owe you lunch my friend!!

[@andresm4456]

Great video! As a time saver I usually install all the hinges on the doors, mark the bottom and top plate positions and install the doors with 2 hinges (i.e. if it is a 4 hinged door). As the door is in an open position I simply screw in the middle hinges which align automatically :)

[@CharlieDIYte]

That's a very good idea Andres, particularly as it's easy to click in 2 gives, not so easy with 4. I've recently used them again here kzbin.info/www/bejne/qpWwn6Ghq66hqKc

[@purza95]

Charlie Great Video! Not too long. I've watched the key parts 3 times now! @ Andres M ... I wracking my brain around aligning a door with 3 or more Hinges... Did you align it with the 2 hinges (Bottom and Top in place i.e. clipped in) so the reveal, etc was positioned correctly then simply screwed the others in?

[@andresm4456]

@@purza95 that's how I usually do it but I still mark a straight line for distance from the edge of the carcass to the center of the clip. As for the reveal I don't worry too much and just follow the instructions of the manufacturer

[@richardplane2155]

Great video thanks . Two comments.: Take that Ryobi drill and drop it in the nearest river. Second: make the jig with two holes for the retaining screws as well as the 35mm hole. It's incredibly easy to get those two screw holes slightly out and 1/10 mm error there amplifies to 5mm error at the other end of the hinge bracket. But thanks for other good advice

[@stevesmith4068]

Thanks. Worth watching all 21 minutes!

[@CharlieDIYte]

Thanks Steve, I appreciate that. New wardrobe build coming up over the next few weeks 👍🏻

[@hussainahmad5967]

Brilliant video, thorough explanation, thank you sir

[@CharlieDIYte]

You're welcome. Thanks for the comment 👍🏻

[@russhargreaves]

You’ve made a difficult job so much easier. Thank you for the links to Blum as well. Loving their soft close hinges. I’m not a regular DIYer but thought I’d have a go after watching your brilliant video. Cheers Charlie!

[@CharlieDIYte]

Thanks Russ! Really appreciate you taking the time to post that. Do it - they're surprisingly easy to fit. You'll be fine. The trick is to make sure you buy the right ones!

[@leorumley8132]

Hi Charlie, not sure if you will see this but my wife and I were discussing building our own wardrobes for an alcove yesterday morning, 14th Jan 2019, and tonight your videos were in in my suggestions, coincidence? Anyhow I've liked and subscribed, excellent advice thank you very much. Off now to watch some more.

[@be4ze1]

Really helpful video! I did this a few months ago, couldn’t make head nor tail of the figures so ‘winged’ it and was very disappointed with the results. Wish I’d watched this video earlier!

[@ccwnoob4393]

very impressive how you were able to align all four hinges. Id probably keep the hinges already snapped together, and after putting them into the door, then just hold the door to screw the other part of the hinges into the wall/side

[@CharlieDIYte]

That's a fair point. Only issue is if you have to take the doors off for any reason, it's easier to unclick rather than unscrew. As they're click on it's good to acquaint yourself with how they work as designed.

[@paulsweeney5642]

Just the right level of detail and clearly explained 😀

[@CharlieDIYte]

Thanks Paul. There's a new video on this here kzbin.info/www/bejne/qpWwn6Ghq66hqKc if you have a moment 👍

[@skip5400]

Loved your video. Made it clear it is above my pay grade. A gift in itself. I will get the expert to do the job. Thanks for the detail; very helpful.

[@rickychatt]

Love this guy's video he explains everything perfectly and takes away some of the fear in attempting jobs like this

[@CharlieDIYte]

Thanks Ricky!

[@Vortiporius_]

Loved the video, don't get too conscious about the video length, if it does get long, just put notes in the video description about time a certain part was done. I enjoy watching the videos to learn all sorts of DIY tasks that you have shown, and would happily watch a longer one if more time was needed to explain something thoroughly. Excellent video as always. Thank you for the guides and especially thanks for telling us what tools you use!

[@tporter23]

Very helpful mate! I will be building a low-profile media cabinet for our home theater reno and this video has given me the confidence that this type of hinge will make doing inset doors no big deal. Thanks for doing all the research and hard work!

[@CharlieDIYte]

Terry Porter Thanks Terry! And I was in exactly the same position as you before I made this video. With a bit of good planning it's really quite straight forward. Go for Blum though. It's worth paying a little more for a quality hinge. Good luck!

[@lmjoshea5915]

Charlie, first of all "Thanks for making and sharing your videos"I just wanted to tell ya that I nearly chocked on me tea when you said you paid 9 pounds odd for the hinges and then 2 pounds odd for the dearer plates..loool.....I'm a cabinet maker for 22 yrs now and i've never bought from plum, but I get all of hardware from C&C fittings Waterford Ireland.(A little plug for them)and by the way, they will ship anywhere in europe I pay for soft close standard with plate 1.80 per hinge (euro) and for inset hinge like you are displaying with plate about 2.80 euro per hinge..If you were ever in need of a lot of them, it might be a good thing to do a little cross the water buying!!!! ;) ;) Keep up the good work!..

[@Samlol23_drrich]

From halfway around the globe thank you so very much for taking the time to post this video. You are right there is very little information out there and your video is going to single-handedly allow me to install my inset doors properly. Cheers

[@petesutherland870]

Great Video, huge help!!

[@CharlieDIYte]

Glad it helped! Thanks for the comment.

[@bcgandrewej8]

Thank you so much for this. We would not have been able to figure this out without this video

[@CharlieDIYte]

No worries Andrew. Glad you found it useful and thanks for the comment 👍🏻

[@englishguy1234567890]

Thank you so much for taking the time to explain the entire process

[@CharlieDIYte]

You're welcome Tim. Funnily enough I had to watch this again the other day as I've a load (38 to be precise) of brackets to install for my wardrobe doors, and had forgotten the dimensions 👍🏻

[@englishguy1234567890]

@@CharlieDIYte I'm currently fitting some alcove units and your tip about making a prototype has given me the confidence to try it out on the proper doors - thanks again

[@karencollins7076]

Thank you ,was struggling with kitchen cupboard doors x

[@CharlieDIYte]

You're welcome Karen. There's this update too if you're interested. kzbin.info/www/bejne/qpWwn6Ghq66hqKcsi=USMd6HNcOu9ThNxw

[@KevinPhillipssb]

Hi Charlie, another excellent video. Your explanations of the hinge details and what to look out for are priceless and will save a lot of time (and frustration if you buy the wrong hinges!).

[@CharlieDIYte]

Thanks Kevin. Really glad you found it useful!

[@WelshRabbit]

It's spelled Blum, but for reasons not apparent, it's pronounced like "bloom." In the US, we refer to this type generically as "Euro hinges." Superb video. Thanks.

[@necscirefasestomnia]

This video was essential for me in working out the Blum hinges. As an update, Blum now have a spreadsheet in the planning section of the Blum link above. If you download the XLS Blumotion planning tool for the desired application, you can input all the relevant details and on the last sheet it gives you all the details required for correctly installing the hinges. Once again though, my thanks go to CharlieDIYte for making the video - much appreciated.

[@CharlieDIYte]

You're very welcome Rich. Thanks for the heads up on the new spreadsheet, and for taking the time to comment 👍

[@anthonydarmanin]

Charlie, this is an incredible video! You explained all the steps in an easy to understand manner, how I wish that I had found this top grade instructional video before I hung my 22 cabinet doors! Thanks again.

[@PAPIOPA1]

Thank you so much for the tutorial! I apreciate the effort explaining the catalogue, and those little tips that nobody teaches and are so needed when you have to put these hinges. I'm about to place my first ones and I bought a Forstner bit that I can use in my router, so that I can set the depth properly and keep the perpendicular exact. Greetings from Argentina. :)

[@CharlieDIYte]

Yes the router will give you a wonderful, perpendicular hole! Thanks so much for the comment, and good luck with the project. Humbled to hear from you in Argentina!

[@alintorn]

A Carpenter myself,, a brilliant video! !10/10)

[@CharlieDIYte]

Thanks Tony - I really appreciate that 👍!

[@denisa400]

Thank You Charlie for this video, and i apeciated because u explained in milimeter, good for me in Germany. thanks alot.

[@CharlieDIYte]

You're very welcome Mircea. There's an update video here you might find useful too kzbin.info/www/bejne/qpWwn6Ghq66hqKc

[@MartiA1973]

Can always rely on one of Charlie's videos when faced with an "oh heck" moment. Well done Charlie.

[@CharlieDIYte]

Thanks. There's a little hinge update here too kzbin.info/www/bejne/qpWwn6Ghq66hqKcsi=Xi8_9AoCeRfvqwNF 👊

[@thehairydiyer]

Another great video. I'll be confidently hanging my new wardrobe doors at the weekend. 😃

[@CharlieDIYte]

Glad to great it Chris. Check out this update video too kzbin.info/www/bejne/qpWwn6Ghq66hqKc 👍