Mount Doors Easily And Accurately | Basics of Building DIY

Adding doors to your DIY furniture and other wood projects can make a big difference, both visually and functionally. Mounting doors can be tricky, though, when it comes to positioning hinges correctly. But you don’t need fancy tools to do it. We’ll show you one way to add a hinge that will make the task more manageable.
WATCH THE FULL PROJECT BUILD:
▸ bit.ly/BasicsOfBuilding
FREE PROJECT PLAN:
▸ learn.kregtool.com/plans/clas...
--------------------------------------------------------------------------------
We get it - DIY projects can seem intimidating. One minute you’re full of excitement and motivation from looking up cool ideas online, and the next minute you’re in the garage surrounded by tools and supplies, unsure of where to start. But you can turn your DIY dreams into reality by mastering some basic woodworking skills that you can apply to projects of all kinds. Watch The Basics of Building video series and brush up on the areas you need. You’ll soon realize this whole DIY thing is easier than you think.
--------------------------------------------------------------------------------
CONNECT WITH KREG
▸ Website: www.kregtool.com/
▸ Facebook: / kregjig
▸ Instagram: / kregjig
▸ TikTok: www.tiktok.com/@kregtool?lang=en
▸ Pinterest: / kregtool
▸ LinkedIn: / kreg-tool-company

[@mireyamanso6707]

Well explained. Very clear. Thanks. God bless you.

[@Delmar829]

Outstanding instruction !!!!!! Thank you for doing this.

[@KregToolCompany]

You are welcome!

[@MrJKellerLewis]

Put painters tape on the back of where you're drilling the hole for the knobs and it won't tear out through the back as much

[@rozleendeo7343]

Thanks for the great demonstration

[@GmoBuelna]

Great again

[@cedaroakfarm8596]

Great video, I have used the jigs several time and now the help with mounting the concealed hinges is great.

[@KregToolCompany]

Great to hear!

[@roykirkpatrick4628]

Very good

[@mokhtarmokhtar3096]

The kreg tools is the best tools for any woodworking projects

[@harrypowers9412]

Nice-Kreg has some GREAT jigs!

[@raeandringa7260]

This is SO helpful and exactly what I needed! Thank you!!

[@KregToolCompany]

Glad it was helpful!

[@harrypowers9412]

Thanks! I’m going to buy one. 👍🏻

[@shellyoxygen9213]

how do you know where to drill the hindge hole and size?

[@christopherlopez9316]

How do I measure my door to only replace old doors?...no hinges necessary bc using old hinges

[@christopherlopez9316]

Can I leave the old hinges and just replace the door.?

[@joseluiss.rodriguez3652]

You the best guy

[@KregToolCompany]

Thanks!

[@santiagomartinez5055]

👍

[@TomCarberry413]

How do you choose which hinge to buy? They have a variety of the same looking hinges at the box stores but with different labels and measurements? No one at the box store seems to know how to explain it. Thanks.

[@U2BER2012]

Usually, you can find info online, however, you still need to know if your doors will overlay and by how much; 1/2", 3/4" etc. Or if you want inset; meaning: no overlay, but flush. Then you would want to know,( in degrees, ) how much the door opens. Personally, I'll usually settle for 105 degrees. And lastly, you can order hinges with soft close, as well.

[@patrickarchuleta9594]

What number do you use the krieg hinge jig on

[@KregToolCompany]

Please contact our team at 800-447-8638 or kregtool.com/help - They will be happy to assist you with this. Thanks!

[@RICKYDENNIS49]

Anybody else notice the dirty great big split on one of the vertical timbers of the door ? Is there a kreg jig to fix that ?

[@U2BER2012]

I've never seen a door built with pocket holes. But then again, those are shaker style doors.

[@johnnichols8553]

I know it's the Kreg channel and they have to sell their products, but those pocket holes on the back of the door look hideous. Plug them, or learn how to build a proper tongue & groove door (what I'm doing now).