How To Midi Map Serato Stems To ANY DJ Controller 🔥🔥🔥

[@TheDJConnect]

Join the private members group for tutorials and more! - www.thedjconnect.com

[@DayNNyteDJs]

Been wanting to do this for months. Fastest, easiest, BEST explanation ever. Works perfect on DDJ1000SRT. Thank you.

[@TheDJConnect]

Heeeeeeeeck ya bro let's gooooo !!!! Do you have the newest update ? I swear the srt should be "fixed" now Where you just replace stem pad mode in settings I could be wrong but I swear everything has it by now

[@FourtyFourCab]

This video helped me diagnose and correct an issue with my SB3 controller. I can now use stems via the pads, amazing. I saw you replying to a bunch of questions and your answers were invariably spot on. Great content + helping the community out = subscriber for life. Keep up the top work bro!

[@TheDJConnect]

Broooooooooo let's gooooooo Love it man !!!!! Only fire coming soon !!! But that means alot man All I care about is helping others, I remember how hard it was for me No help No support Nothing If I can just help one person my mission is complete LETS GO BROTHER 💪💪💪💪💪

[@michaelscarn378]

Dude I have same controller and I connected it thru MIDI and everything but now I press vocals and the vocals go away but it jumps to my hot cue - how do I fix this?

[@DjZamfir]

@@michaelscarn378 did u solve the problem?

[@keendnb]

I have a mixars primo and I don't use the sampler so i tried assigning those 4 pads to the stems. It assigned them but took it the functionality of all the other buttons, cues, slicer etc..... it worked if i used shift and the pad..... Also the light on pad is went off when tapped once and then stayed off.... Still out works well other than that

[@johnnybeatz7513]

This worked on my ddjsx thank you for the detailed explanation

[@TheDJConnect]

🔥🔥🔥🔥💪💪💪💪 let's gooooo

[@CrewElite]

Doesn't seem to work with Denon MCX8000. I tried to remap the midi, but it disables my cues, rolls, slicer and sampler

[@TheDJConnect]

You I assume if it's not supported yet, you just gonna have to wait Sorry brother

[@CrewElite]

@@TheDJConnect I think they did mention that it supports stems but maybe they were referring to the hardware and not remapping. I really appreciate your help and video. I'll look into this more

[@TheDJConnect]

@@CrewElite no worries If it's supported When you open serato with controller turn ON go into settings First tab, like half way down the page maybe Says replace pad mode with stems and you swap one

[@CrewElite]

@@TheDJConnect Yep! All good now! You are a life saver! I forgot to enable this setting

[@TheDJConnect]

Hahahahaha got you bro !!! 🔥🔥🔥🔥

[@conwayGAMES]

this was exactly what i was looking for! thanks!

[@TheDJConnect]

Let's goooooo 💪💪💪💪🔥🔥🔥🔥

[@maysatake636]

Only this video explains how to MIDI map. I'm using Roland 202 and it works perfect ❤

[@TheDJConnect]

Sick ! Most controllers now there's no reason to midi map Just at the start

[@BeatsbyLonza]

Thank you. I’m gonna assign mine to the sz. I knew it was something easy

[@TheDJConnect]

💯

[@athisayannanthasegaran8894]

Bro if I map the stems on saved loops it turns in white leds I prefer the blue ones you know how to change it into blue like yours

[@TheDJConnect]

I don't really.know man I don't think there's any need to map anymore If it works ot shouldnt need mapping anymore I don't think

[@athisayannanthasegaran8894]

@@TheDJConnect yeah I found it thank you 🙏 I just needed to download the firmware 🤦🏾😅

[@TheDJConnect]

@@athisayannanthasegaran8894 got you bro!!! yaaaaaaaaaaaaa man !!!! go crush it now!!!!

[@10stban]

I'm trying to remap my Reloop Ready to be able to control the Stems with the pads usually assigned to the Samples. However, when I assign them to the four pads in the first row of the Samples group, the Steams function is mapped to the four pads in the first row regardless of my selection (hot cue, auto loop, manual loop). reloopready does not have a different mode buttons is more like you press mode button and the pad u want to use hot cue auto loop etc

[@TheDJConnect]

I don't really know man You'd need some controller specific training Are you holding the shift button during everything

[@MovieCaveDave]

Can you possibly do a video on Midi Mapping the 6 ‘Mic’ dials to the Serato effects on the Rane One, so for example’Mic 1 Off/On’ would be the amount of the ‘echo out’ you would want, so like as a dial instead of using the macbook track pad/mouse.

[@TheDJConnect]

Hey, I don't have a rane one so I can't really help Mic selection on effects would mean effects you are applying to your mic

[@xscycho]

Numark ns6II trying to midi to slicer but it changes all my buttons cue auto loops now they all do stems. Any idea how to just keep it on the slicer mode.

[@TheDJConnect]

Hey I'm not sure Form all the numrak issues I've seen, I assume just the brand is out of date and unsupported But I've heard some guys holding shift thru the entire process being able to evade the problem sometimes

[@bimmtb4242]

Best explanation ever got mine working now 1000srt here 👍

[@TheDJConnect]

Ohhhhhh snap let's gooooooo!!! I think anything updated now should be included tho Within the settings, just "replace stem pad mode"

[@pradeepjethwa1830]

How do you save stems on different dj controllers and mixers. Every time I plug it into something I always have to assign it again on the controller pads or when using djm 900nx2??? Help

[@TheDJConnect]

Not to sure By now most things are pretty default You have to assign buttons still ? A djm has cue pts ?

[@JasonTheCosta]

Very useful, thank you. I decided to exchange my sampler for the Stems functions.

[@TheDJConnect]

Let's gooooo ☝️💪🔥🔥🔥🔥

[@GregoryGioia]

The sampler would be one of the last things I'd get rid of. I use that all the time. Slicer is my first to go. What is that even for, anyway?

[@TheDJConnect]

@@GregoryGioia it's for chopping up the beat live

[@GregoryGioia]

@@TheDJConnect I was asking rhetorically. I know what it does, but I've never found to use for it.

[@TheDJConnect]

Ohhh hahaha Just another tool I've never really used it either I think it's more so for people who want something easy to do that makes it look cool I've seen it used properly a handful of times Noninterest from me either

[@tjgourdy]

Feb 2024, sl3 box isnt supported with the stems update version 3.0. i have Tech 1200s, Pioneer djm 909 ,sl3 box, Pioneer sp1 controller, i believe i have to upgrade to denon ds1 to get serato v3.0, but how do you operate hot cues AFTER the hot cue pads on the pioneer sp1 are changed to operate stems ... I need to know this BEFORE i piss away $$$ for Denon ds1 box...PLEASE Help

[@TheDJConnect]

What are you using a Denon da box for ?

[@ClementEsteban]

Great video thank you ! I just have one quick question though : I am only interested in having the ability to have vocals only (mic icon) or instrumental only (keyboard icon), is it possible ?

[@TheDJConnect]

I've never tried that no ! But I'm almost positive you can If I were to recommend tho, I'd use the vocal echo and instrumental echo on any transitions They are the least abrasive

[@weddingmusicperth]

Worked for my SR2 but the pad lights are pretty dim. Any ideas on how to make these brighter/change the colours so they are easier to see?

[@TheDJConnect]

I don't think there's any way to change the dimness I don't think you can ever change the colours or anything but I could be wrong

[@madamedutchess]

3:50 That's a great track too. Works great on the dance floor

[@TheDJConnect]

Hahahahaha I had to check it out BIG TUNE !!! definitely a crazy flip And works great with stems too

[@e11world]

Wow over 400 comments no one using or mentions the Roland DJ808. I tried to replace the TR/pattern pad buttons but it won't let me and even has the option in setting to use the Roll pads which I use already so this kind of sucks.

[@TheDJConnect]

Ya I don't really know anything about Roland myself :(

[@stizmir]

I did it but the stems are kicking in with a delay and cutting off (I have XDJ RX3)

[@TheDJConnect]

If stems are delayed it's most likely your computer not powerful enough

[@steve-nosleeve]

Sometimes for a smoother transiton, i find going 100% to 0% by hitting a stem too "rough", is there any way to control the stem reduction percentage ?

[@TheDJConnect]

There is if you have a controller with controller via EQ But I think it's controller dependant

[@fighterz9995]

I have a Numark Mixrack Platinum FX. How to use this on Serato Pro.. I have a Roland DJ 505 controller. I want to use my Numark on it. Help me out

[@TheDJConnect]

Should be fine but I don't really know Does it work with serato lite ?

[@nitruxian]

Hi there!! I would like to know if is possible to map the denon prime 4 like the flx 10, the shift +cue buttons. Instead of controlling the eq , i would like to bring down the volume of the vocals

[@TheDJConnect]

I don't really know man sorry I don't have any denon gear If it's higher end tho, I'd say yes of course

[@nitruxian]

Is ok don't worry😊

[@TheDJConnect]

@nitruxian just try it out and see what happens ! Most stuff has been good from what I know !

[@Stigskij]

Cleared out every pad mode for me. i use the numark ns6ii and it's not working.

[@TheDJConnect]

Did you get the new official release?

[@Stigskij]

@@TheDJConnect yes. and it cleared out all my pads when i tried to midi map stems.

[@TheDJConnect]

@@Stigskij not sure what to say Everyone says the official has fixed everything

[@lafealconley1840]

I followed the tutorial with the Numark NS7III. when assigned, it changes the control for each tab (cue, auto/roll, loop, etc) not just the one that you choose. Have you heard of this happening to anyone?

[@baltiq]

i have numark ns6II and the same problem!!! i use one more contoler akai lpd8

[@TheDJConnect]

Hey I actually just got told from a guy with an ns7 it's all good I believe you have to map it

[@nigelscott5768]

Yes I have the same problem I am using that roland dj 707 m controller

[@TheDJConnect]

@@nigelscott5768 Yea from what I've seen you might be out of luck until you get support from serato. I have heard things about holding shift thru the whole process, but I dont really know sorry borther

[@eurecopage8755]

Will this work for the Numark ns7II as well?

[@mattruggiero3610]

Hey I’m fairly new to all of this I just had a question. I’m using the numark platinum fx and it comes with certain fx but I’m just confused. Maybe. I have to watch the video again but I don’t really use fader cuts as that’s a button on my controller. Do I have to press on fader cuts then midi and my pads will be the fx I choose? Idk if that made sense but anything helps thanks

[@TheDJConnect]

Hey so I don't know that controller specifically In the settings is there anything saying replace stem pad mode

[@djp3ma280]

what about ddj - rz? is that possible to map in serato? please help

[@TheDJConnect]

Shouldn't be a problem at all I doubt you have to map

[@JeffNeckonoff]

Awesome bro. I still have the DDJSX as well and just midi mapped it according to your awesome video. Thanks.

[@TheDJConnect]

He'll ya let's go!!!! It might even be pad mode replaceable by now with the newest update, but I can't promise

[@DaBeatmasta]

what about numark v7? because its no longer supported by sdj 3.0 + . How can i mapped stems but they dont allowed my V7 get in sdj 3 ? (always show pop up notification)

[@TheDJConnect]

Hey I feel like almost everything got supported If you got something that isn't supported, Time to upgrade hahahaha But ya I don't really know I don't map or anything normally, I run stock everywhere

[@devonsdmalone5991]

I'm have a Numark platinum fx controller and I programmed the stem to my fader cuts but it's still on my sample button as well. I tried going into preferences and click on replace primary hardware pad mode with stem but I only have a sampler option and I can't switch it to nothing else. I'm having trouble keeping stem on fader cuts and sample on sample at the same time. Any suggestions would be greatly appreciated.

[@TheDJConnect]

I don't really know anything about stems on fader cuts But you should just reset to default, And start again Change only the ones you want But reset to default and set it how you want

[@TheDJConnect]

Id love to see a video on this tho ! I've never heard of someone doing this Unless I'm not understanding correctly

[@typhfanuwu7526]

Ok

[@TheDJConnect]

@@typhfanuwu7526 ☝️

[@josephzhao5539]

For some reason when I mapped it to my ddj xp2, it did work mapping wise but the blue and orange lighting didn’t show up and it’s just white. Do you know how to fix that?

[@TheDJConnect]

Not specifically Prob just redo the whole process it's not saved or something correctly

[@stephenrolend9544]

Any Idea About Pioneer DDJ 1000srt ??.... dose that have the capability to use stems

[@TheDJConnect]

The pioneer should most definitely just be built in

[@DjGCue71]

I did this with my Pioneer DDJ-SZ2 it works but is a bit chopy. when I look at the screen on the jog wheel, it is going in slow motion. how do I revert back? I don't like it. and I know is not my laptop because i have a mAcbook Pro, M2 chip, 32gb memory & 2Tb ssd. I dj'a a wedding with it and I was afraid the program was going to crash or somethin'

[@TheDJConnect]

Just reset to default brother! super weird tho, the laptop should be fine which is normally the only issue for stems I find it weird that it would be the controller

[@Pascal_IU8CEW]

5:25 Thanks! I'll try to assign the Stems to the PADs of my little Hercules Dj Control Starlight :D . Nice video!

[@TheDJConnect]

Hahahaha no worries man !!! Good luck !!!! Hope it works out !

[@Pascal_IU8CEW]

@@TheDJConnect great bro! just tried it and it works great with the stems assigned instead of the pads samples, now it's super mini console!

[@TheDJConnect]

@@Pascal_IU8CEW YES!!!!!!!!!!!!!!! THIS IS WHATS UP! Make it your own! If you got spare buttons, set them to do anything you want!

[@a-manthedj13]

Hey thanks this was super helpful i have the Ddj sx !!

[@TheDJConnect]

No problem fam ! Glad it helped !

[@kookshed]

So it worked for the DDJ SX no worries, yes..? No issues ?

[@TheDJConnect]

@@kookshed It should work fine I would assume.

[@kookshed]

cheers mate, all good! i went to start midi mapping and realized that there's now an option in Settings (in later Serato versions) that allows you to do it (on certain controllers) without the mapping (you still have to give up the use of a performance pad set eg- Slicer) But good work on helping out others! Keep it up. Cheers

[@TheDJConnect]

@@kookshed ya man !!!! Definitely settings first Replace stem pad is on almost all pioneer now sorry totally forgot !;

[@frankiefingerz8047]

I have a pioneer s7 I want to have my cue points on the top 4 & stems on the bottom 4 is this possible i tried to set stems on the bottom it didnt work

[@TheDJConnect]

I don't think so Only the s11 to my knowledge I could be wrong but to my current knowledge

[@frankiefingerz8047]

Yea i dont see anything online about how to remap the stems on an s7

[@TheDJConnect]

@@frankiefingerz8047 you can def map them anywhere, But you can't split the cues Super annoying cause ingot a rev7 Same issue, weird they haven't patched it in, can't be that difficult I do have the extra 4 cues, but I haven't changed the yet

[@365fuji]

Hi I have mapped my buttons for the stems but when I turn off the vocal or other stems it turns it off from the other side too? How do I fix this

[@TheDJConnect]

You gotta map the right side to right side And left side to left side See if there's different ones What controller ? Have you checked replace stem pad mode

[@365fuji]

Thanks for the quick reply! I’m on the numark platinum, I don’t have the option on my settings for replace stem pad mode and I have tried to map the right side only but it still does the same thing and turns it on the other side

[@TheDJConnect]

I see I dont really know, apart from trying again, if it dont work by now itll prob never work, can try support over there

[@christopherjenkins1209]

Thank you so much for this! I just did my Serato Mixars Duo II and everything worked just like you said right after so it doesn't light up blue but white but I know when I am in the stems setting and then switch to cue mode because of the colors of my cue points. God bless and thank you again.

[@TheDJConnect]

Yooooo let's goooooo brother !!! 🔥🔥🔥🔥 Love it man !!! Stinks that the colour isn't there, but as long as it works, that's all that matters 🔥🔥🔥

[@nigelscott5768]

Hey I have a roland dj 707 m controller I am unable to do the midi map on this controller whenever I do the midi map it takes over all the buttons

[@TheDJConnect]

It seems like it probably just doesn't work I've heard hold shift during the entire process for those functions and it might help ? But you prob need official support from serato

[@nikkogonzales4818]

Bro. Such a great help. Thank you

[@TheDJConnect]

Love it !!! Thank you for watching Means alot !

[@mathis_grx1816]

can you change the color of your stem pad ? if it is possible how do you do it??

[@TheDJConnect]

At this point, I don't think you can. If you can, I have no knowledge of it, I would assume you can only do this with mixer settings on your own end

[@keithgarner2917]

Hey that tutorial was very informative. I have an old Numark NS6ii and it work great. Thank You!

[@TheDJConnect]

Amazing !!! Let me know how everything goes in the future !!! Should all be amazing now Have fun and thank you so much !!!!!

[@eliotmansfield]

I have the same numark NS6ii - I want to reassign the sampler section to stems, which works. But it then breaks the pads for all the other sections, such as cue and autoloop - in that section it also turns the assigned stems function on/off. How do i make it only assign when in the sampler section of the hot pads?

[@MrGenkleman]

@@eliotmansfield Exactly the same thing I NEED to know as well.

[@TheDJConnect]

@@eliotmansfield Honestly I don't really know bro Did you get the official 3.0? And is it supported now? You might have to wait until it becomes supported unfortuantely !

[@marc-seanbrowne6260]

Hey help me broo inhave the same ..but it keeps replacing my cues ..how did u make ut stick ..im trying to set it up under the slicer button ..its useless so how do i do it G

[@GregoryGioia]

Something isn't working, but I don't know why. I did exactly what you did, trying to remap stems to the slicer pads on my Rane Seventy-Two, but once I finished, all of my pads are stems. Cue, auto loop, sampler, roll, slicer are all stems now. I deleted the midi settings and tried twice more, but always the same result. Changing slicer to stems changes everything to stems. I eventually gave up and mapped stems to the "user 1" pads, but I have to hold down shift to access that, which is why I want to remap it over slicer. Any ideas?

[@TheDJConnect]

Hey just go into settings and hit replace stem pad mode

[@adamkrzesniak994]

how to connect Serato stems with ddj sz2? thanks

[@TheDJConnect]

Is it officially supported now ? Must be

[@steviebsdjservice]

Will it allow you to midi map the 2nd row of buttons under the 4 stem effects on the top row on the pc side as well?

[@TheDJConnect]

Not sure what you're asking Split cue only works on the s11 tho

[@steviebsdjservice]

Vocal echo, instrumental echo, instrumental braker, and drums echo. Theses are the effects under the stems you mapped. There awesome if they can be mapped as well.

[@TheDJConnect]

@@steviebsdjservice ohhhhhh Ya of course lol Most controllers tho you don't have to map anymore If it's supported, you just replace syem mode But ya you can map anything anywhere

[@steviebsdjservice]

Awesome thank you sir!

[@TheDJConnect]

@steviebsdjservice 🔥🔥🔥💪

[@dubzy8334]

Somehow on my s9. My cross.fader keeps removing vocals from every song. It's ridiculous. I cannot figure out how to disable this. I recently installed serato video and haven't used the mixer since. I just had a gig I had to do . 500 people and I had to use the vertical faders. If I touched the cross fader it immediately removed vocals and bright them back on its own schedule. Drove me insane. Any help ?

[@TheDJConnect]

That's stems Seems like somehow you've mapped it to your fader

[@mickaelcoralie6710]

Thank you very much, Exactly what i'm looking for, I'll try with my S9

[@TheDJConnect]

Let's gooooo 99% sure it works perfect with s9 My buddy had it

[@bigjune29]

I tried to remap the mixar primo on the slicer. stems works but it also took over hot cue roll slicer and sampler. So I just mapped the sync buttons as echo fade. Need help!!

[@TheDJConnect]

Hey was it ever officially supported ?

[@bigjune29]

No it's not on the list.

[@TheDJConnect]

@@bigjune29 think you might be out of luck brother :( Just gotta wait for an update It seems to have fixed everyone's issues once available I've never ever heard of mixars before

[@bigjune29]

OK cool thanks

[@TheDJConnect]

No worries man Hope it changes soon 🙏🙏🙏

[@ssly8143]

I own a denon 3900 using serato but I can't seem to midi map the start / toggle / pitch but the cue buttons are mapped but the rest are not even showing up. Do you know if stems is not recognizing this controller

[@TheDJConnect]

I dunno man if it's not supported yet probably not. I'm not too sure about Denon

[@seas2022]

Just want to know if there is way use slicer on pioneer dd jsz to show cue points and stems at the same time as the Rane 4?

[@TheDJConnect]

You can midi map anything to anywhere Not familiar with what you're talking about tho

[@Kidderbean]

Numark nv doesn’t show up at all in the midi section. Any idea’s?

[@TheDJConnect]

I dunno man Not really sure Even herc pads show up as midi Dunno what to say

[@brothermarlon]

I'm on the Rane One and it cleared out all of the other pads, it only does the Stems no more hot cues or sampler, I've done it like 10 times and it keeps happening.

[@TheDJConnect]

What you mean ? You lost all your mapping ? Just reset it to default

[@GLOVEGLOBAL]

Same here using Denon SC6000 & 1850 Denon mixer.

[@TheDJConnect]

@@GLOVEGLOBAL Did you reset? Not exactly sure what happened, but you can just reset to factory

[@GLOVEGLOBAL]

@@TheDJConnect Atfer turning off unit it returned to factory settings.

[@TheDJConnect]

@@GLOVEGLOBAL Dope! I actually finally got rid of the beta myself, Had some library issues so just went back

[@kuba1138]

Does it work on Numark MixMeister Control?

[@TheDJConnect]

I don't even know what that is bro

[@hand2handclub2club23]

Hey Used your tutorial on how to midi map as Serato 3.0 only allowed the replacement of the Sampler Pads which is commonly used by most Djs... Using the NUMARK Mixtrack Platinum FX I was able to remap my Pads under FADER CUTS mode which i use less then the four modes on the hardware. Thank You

[@TheDJConnect]

No problem brother !! That's what's up !!!!! Yea there's alot of functions I really don't use either Lots to swap :)

[@ericdelarosa4142]

I also have the same controller but I keep losing all the cue point pads. How did u get the mapping to stay programmed under fader cuts without losing the cue pads? I'm on serato 3.0

[@TheDJConnect]

@@ericdelarosa4142 is it officially supported? You have to use the settings

[@DjGaffa_Ke]

​@@ericdelarosa4142 I'm having the same problem, how did you solve yours?

[@fitlegend]

I mapped on Denon MC7000 and pad only can use for Stem, no hot cues, no roll, nothing so I need to reset, I mapped on Numark SJ2GO2, it work fine, and I saw many Denon owner has same difficulties

[@TheDJConnect]

Ya seems like it's unsupported Sorry brother

[@bigliphproductions2716]

When I do this, I can only use stems on the pads I can no longer access my other options. I am using a rane one. Anyone else have this issue? Thanks!

[@TheDJConnect]

With rane 1 you use the settings menub

[@djessencejohnson7102]

thank you so much...i have a numark ns7iii an it mapped perfectly!!!!

[@TheDJConnect]

No worries brother !!!! So glad it helped you man 🥰🔥🔥🔥🔥🔥

[@djcassiana]

i have the numark platinum fx and it will only let me set my pad mode to my sampler function but i want to use my samples too. when i did the midi remapping it set that pad no matter what mode it was on for this function so that does not work either. i need help haha thank you

[@TheDJConnect]

Ya I'm not to sure man Can you map sampler somewhere else ? I don't know much about that board but it seems like it's locked for alpt of people to make changes

[@djcassiana]

@@TheDJConnect hmm maybe 🤔

[@TheDJConnect]

@@djcassiana did you try holding SHIFT thru the process?

[@georgepkelley]

Can you midi map stems to the rane 72 mixer

[@TheDJConnect]

Of course you can

[@andrethomas2205]

Top angle was perfect for the tutorial. Thx!!!

[@TheDJConnect]

Hahahaha no way ! Thanks for letting me know It's a pain in the ass to edit so glad to hear it matters 🤣🤣

[@egeleszmelek]

Woow, it works :) Thank you. My setup - Reloop beatmix 2 + Serato 3

[@TheDJConnect]

Helllllllllllls ya bro let's go 🔥🔥🔥🔥🔥🔥☝️💪💪💪

[@kishonsamuel4153]

My issue with stems is after i finished analyze all the songs i want to use then go to play it,it play only for a while then no sound..anyone have any idea on how to fix that

[@TheDJConnect]

I dunno man, I've never had an issue what so ever with stems My only advice is get a better computer, Or don't use stems There is 0 issues with stems itself inside of serato It's a board or computer problem

[@duTCHIEization]

awesome video! i used it on my reloop serato pad (older model and worked great!

[@TheDJConnect]

That's what's up bro !!! Still not sold on it, But super fun to mess around and create concepts tho 1 million %

[@Zackavelli2461]

I’m having the same issue with Rane One to. when I click on the stems tab and assign it to a midi pad it gives me the option to choose between overriding the pad or adding an additional function to that pad. I tried both options! I some clarity on this please!

[@TheDJConnect]

From what I know, the rane one should have the option right in settings First tab Like half way down the page "Replace pad mode with stems ____"

[@victorpadilla9444]

Doesn't work on my pioneer ddj-xp2 any suggestions I do appreciate.

[@TheDJConnect]

Does this work with serato itself ? You have to have an active serato subscription and program running Serato studio ?

[@victorpadilla9444]

@@TheDJConnect Yes I am subscribed. or maybe I'm doing it wrong

[@TheDJConnect]

@@victorpadilla9444 can you tell me the full setup you have going on ?

[@eldiablo5092]

Getting a djj-rev1. Is this only working in pro or does dj lite do this too.

[@TheDJConnect]

You should def have stems on lite too !

[@aahladvadrevu1004]

super straigth forward. helped so much. thanks!

[@TheDJConnect]

Always brother !! How's everything??

[@B1811Agyapong87]

This video is super helpful. Thanks mehn

[@TheDJConnect]

No worries brother !!! So glad it helped 🔥🔥🔥🔥✌️

[@mateomoreto]

For all of those people having problems with the Numark NS7III, I was having the same problem and tried everything, but this is an alternative that worked : simply map the stems to your “side vertical cue buttons” they are to the right and left of your decks and they go from 1-5 right below your shift button The only disadvantage is that you can’t use all the stems effects, you have to choose one It worked perfectly, I know it’s a bummer but we’re gonna have to use that until an update comes out fixing the issue Hope that helped

[@TheDJConnect]

BROOOOOOO THANK YOU FOR THIS!!!!!!! SERIOUSLY!!!! You're a killlllllllla homie!!!! But ya, you can literally map it to ANY button, But when you map something, you loose the OG, So it's kind of pick and choose unfortuantely =( But thank you!!!!!!!!!

[@CheckitOutYaw]

3 months later, same prob unfortunately

[@LB-lx8iq]

After I assigned them the colors are the same can we switch the pad colors?

[@TheDJConnect]

No I think colour is assigned

[@djdink9765]

Tried to midi to slicer & it didnt take'....any suggestions???????

[@TheDJConnect]

What controller

[@djdink9765]

I got it I just missed the step about assigning stems to slicer.....Thanks for the video

[@TheDJConnect]

Hahahahaha no worries ! Ya super simple if it's supported Literally just swap out in settings !

[@floydfeatherston7297]

Stems doesn’t work on my Rane One. I’ve tried Serato 3.0 and 3.1 stems is very erratic on both. Had to revert back to serato 2.6 Thanks Floyd

[@TheDJConnect]

You should just be setting stems in your settings on the Rane one You don't midi map it

[@brandi4311]

I have the ddj Sr2! i see the link for "Midi" but it doesn't let me clock on it. Im using Serato Pro.

[@TheDJConnect]

There's no stem replacement by now ? In settings

[@brandi4311]

I Had to update the software LMAO! Thank you for the helpful video!! @@TheDJConnect

[@TheDJConnect]

@brandi4311 no worries hahaha Ya I think just recently almost everything now has replace pad mode Sorry was setting up an event didn't really explain

[@BonezMatic]

What about the pioneer sz it’s not supported?

[@TheDJConnect]

I'm not sure just check the website

[@jazzypetelindemann8565]

Ok will give it a go thanks for making this video :) ...midi map my numark ns6 mk2 Was thinking of replacing my slicer pads ( as I never used slicer being more and rnb jazz house, old school dj ) with the stem functions.. or this is onther function you would recomend to replace on the pads ?

[@TheDJConnect]

That's what's up !!! Ya I would prob do the same Mines built in but I def never use sliver

[@chrisforbes3809]

Will this work for the Mixars Primo controller? Seen a few threads that says its impossible to do!

[@TheDJConnect]

You can midi map any button, But I can't confirm If it's not supported, you'll have to map it

[@chrisforbes3809]

@@TheDJConnect I managed to map it at the cost of the effects. I’ll soon find out if I can live with that compromise. Thanks for the video. Much appreciated.

[@TheDJConnect]

No worries brotha ! I feel like it's super novelty Nice to play around with but runs it course But figure out what works best for you !! Can map anything anywhere so figure out what you like !

[@jnny7182]

So I can rock serato stems on my pioneer Ddj 400?

[@TheDJConnect]

Ya shpuld be good ! Is it officially supported ?

[@andremoussa5196]

Can I do this pioneer Ddj s1?

[@TheDJConnect]

You should be able to yes I believe by now most controllers should be enabled standard if it's possible by now ? I could be wrong But anything midi is good to go

[@dez5]

great video on midi mapping.

[@TheDJConnect]

Thanks man !!!

[@groundloopevents6078]

Is it possible to Midi map your stems to an Elgato Stream Deck or to some kind of beatpad? I am having a similar issue where I can use hot cues OR use stems, but I can't use both.

[@TheDJConnect]

Well as long as it's midi mappable I'm not 100% on stream deck, but literally anything else that does midi Bear pads and stuff 100% you can But stream deck I dunno

[@srgod9944]

Did you manage to do it succesfully? I have the same doubt

[@TheDJConnect]

For streak deck I've never tried but doubtful Literally Any midi pad works tho

[@BernieVanDateDJ]

Thank you very much! Great video

[@TheDJConnect]

🔥🔥🔥🔥💯💯💯💪💪💪💪🙏🙏🙏🙏 thank YOU

[@Busyofficial247Comedy]

Can it work on my little DDJ Rev1

[@TheDJConnect]

Ya You don't need to map anything tho

[@ronsgetnbusy]

Somehow, one of the midi functions attached to my crossfader. How do I’ve reverse that?

[@TheDJConnect]

There's a reset to default right on that same spot Make sure to SAVE I dunno about specifically reversing that, But just reset to default and start again

[@ronsgetnbusy]

@@TheDJConnect Thanks

[@TheDJConnect]

@@ronsgetnbusy no worries did it work out ??

[@ronsgetnbusy]

@@TheDJConnect Worked like a charm, Thanks

[@TheDJConnect]

@@ronsgetnbusy no problem glad to hear !!! Now go bust down some STEMMMMNNNS 🔥🔥🔥🔥💪💪💪💪

[@djswaglightyear2193]

I tried mapping stems on DDJ SB3. I used the infamous Pad Scratch bank. Now, when I try to use stems, it controls the stems, pad scratch, and cue points at the same time. HELP

[@TheDJConnect]

Did you get the official releasE? I would start there first for sure Than reset to default and try again

[@MrGenkleman]

@@TheDJConnect I got the same result on the Mixars Primo and the NS6II. It's frustrating

[@TheDJConnect]

@@MrGenkleman ya I dunno what to say man Really sorry to hear that Hopefully gets support soon !

[@eliotmansfield]

i seem to have the same problem with my Numark NS6ii - I want to reassign the sampler section of the pads, which works - but all my other sections such as cue and loop now toggle the stems feature

[@MekaLolita]

Hey! Did you ever figure this out?

[@luismirabent]

for midi need serato pro or it works with serato lite?

[@TheDJConnect]

Pretty sure you can map anything really, But unfortunately I can't confirm

[@TH4TSR4VEN]

That’s dope gonna try

[@TheDJConnect]

Helllllllls ya bro get it done !!!

[@citystreets2k5]

I tried the MIDI map steps with an NS7ii but there’s no way to do it. This controller doesn’t work with any Serato past 2.6 where stems isn’t available to map . Therefore might want to update your vid bc you cant do it with any controller outside the units that can run Serato 3.0 or later

[@TheDJConnect]

You might just want to get a new controller

[@erichampton2834]

Bro it works thanks alot on my demon dj mc4000

[@TheDJConnect]

🔥🔥🔥🔥 Thanks for watching man

[@rudeboyhansley8612]

Using the 3.0 version?

[@TheDJConnect]

Ya

[@rlthomas]

Pioneer has updated most of their controllers . But only 2 for numark.

[@TheDJConnect]

Ya I love pioneer They care lol

[@rlthomas]

@@TheDJConnect I'm trying to be loyal to Numark but they have fallen off .

[@TheDJConnect]

@@rlthomas I feel you bro I used to LOVE Rane, Now, I'll never touch them again after my 72 mixer. The 12's are dope, but the mixer is so fucked And I've seen 10000000000000 rane ones break, so I think I';m out Once you go pioneer, you never go back

[@johncarrera6779]

Hello will this work with ns6 ii? Thanks in advance

[@TheDJConnect]

I don't know.... If I were to guess probably not

[@johncarrera6779]

@@TheDJConnectjust like your video first states, i am able to use stems using laptop cursor, i guess ill try the midi mapping instructions. Thank you

[@TheDJConnect]

@@johncarrera6779 ya man it's hard to say Serato has a list of all the hardware that's supported From the comments, seems like basically every single numark.doesnt work But some guys have said a hack with holding shift thru the process helps Just gotta play around with it and see If you have buttons you don't use, map just the acapella / inst buttons to them It's fun to mess around with at home, I don't recommend using it live tho Most tracks don't sound great

[@TheDJConnect]

And ya you can enable everything with mouse But any button you don't use can be mapped

[@johncarrera6779]

@@TheDJConnect thanks i will try it. Ill keep you posted if it works using the controller

[@djmikoleafrobeatsandeastaf8551]

How to unmap or delete Serato stems on ddj sz

[@TheDJConnect]

Should be in the video, Reset to default Save

[@DJJMillie]

Tried this using Rane 70 and it did not save properly. Any tips. Thank you.

[@TheDJConnect]

Is it officially supported now ?

[@DJJMillie]

@@TheDJConnect I thought it was. It says serato on my 70

[@TheDJConnect]

@@DJJMillie have you checked settings ? Main page Stem option

[@DJJMillie]

@@TheDJConnect yeah I finally figured it out. 🤦🏿 Thank you anyway for responding.

[@TheDJConnect]

@@DJJMillie No worries glad to hear brother!!

[@djrichieg6257]

Stems taking over my pads on reloop ready as well. FML. Now can’t get back Hot Cue

[@TheDJConnect]

Reset the mapping to deafult...

[@maceburkett4251]

Stems with easy for my rev7 now I'm trying to see if I can get them on my ns7iii

[@TheDJConnect]

Awesome bro ! Just depends of it's supported or not From the comments, I don't think it is unfortunately

[@shalva098]

can i use steams on ddj sr?

[@TheDJConnect]

What do you mean? Streaming?

[@shalva098]

@@TheDJConnect i mean to breakdown the music to midi map, as a Melody, drum, vocal and bass. On my sr can i use this function?

[@TheDJConnect]

@@shalva098 yea I would assume so. i dont really understand the question Stems is available now everywhere. Whether your controller natively supports it or not is something youll have to look into. You can always map it

[@djwettent7013]

My numark nv controller want let me move it to my pads

[@TheDJConnect]

I don't even know what that controller is man

[@djwettent7013]

@@TheDJConnect it's made by numark my midi not popping up

[@TheDJConnect]

@@djwettent7013 you'll most likely have to connect with numark support

[@djwettent7013]

@@TheDJConnect thanks

[@TheDJConnect]

@djwettent7013 no worries sorry about that

[@Dj_Station]

thank you!

[@TheDJConnect]

Got you fam