How To MIX ANY VOCAL Recorded On A RODE NT1 Microphone!

Learn how to mix any vocal recorded on a Rode NT1 microphone using only stock plugins!
AMAZON LINKS:
BUY THE NT1 SIGNATURE SERIES ➡️amzn.to/3u3ZOHI
BUY THE RODE NT1 (4th GEN) ➡️ amzn.to/3BUuKfy
BUY THE RODE NT1 (5th GEN) ➡️ amzn.to/3YYh8sd
RODE's OFFICIAL STORE ➡️
BUY THE NT1 SIGNATURE SERIES ➡️ brandstore.rode.com/products/...
(FULL DISCLOSURE):
If you purchase an item using my link, it provides me a small commission (at no additional cost to you) which helps me create more videos and review more products.
SUBSCRIBE HERE: / @homestudioacademy
⏰ TIMESTAMPS ⏰
0:00 - MIXING RODE NT1 VOCALS
0:26 - DE-ESSER
2:10 - SUBTRACTIVE EQ
4:16 - COMPRESSOR
6:07 - ADDITIVE EQ
7:09 - BEFORE AND AFTER
7:58 - TIME SAVING TIP!
If you're a musician, content creator, podcaster, or voiceover artist looking to get professional sounding recordings, then check out this tutorial on how to mix any vocal recorded through a Rode NT1 microphone.
#rodemicrophones #rodemic #rodent1 #rodent1signatureseries #nt1signatureseries #rodent1a #mixingtutorial #mixingvocals #mixingtutorials

[@homestudioacademy]

*BUY THE NT1 SIGNATURE SERIES* ➡️amzn.to/3u3ZOHI *BUY THE RODE NT1 (4th GEN)* ➡️ amzn.to/3BUuKfy *BUY THE RODE NT1 (5th GEN)* ➡️ amzn.to/3YYh8sd *RODE's OFFICIAL STORE* ➡️ *BUY THE NT1 SIGNATURE SERIES* ➡️ brandstore.rode.com/products/nt1-signature-series?sca_ref=4615720.rOR1Jtd7lV (FULL DISCLOSURE): If you purchase an item using my link, it provides me a small commission (at no additional cost to you) which helps me create more videos and review more products.

[@obeyamadeusflowerchid]

Very Helpful Bro This Video And The Apollo Twin Tutorial Video Has Taught Me A lot 💪🏽

[@homestudioacademy]

Thank you! Glad you found them helpful 😊

[@rionvalet]

This is very helpful! Thank you for the efforts, the way you mix it is really accurate & your explanation is technically easy to understand. You are really underrated, I gotta tell you..

[@homestudioacademy]

Thank you so much! I truly appreciate your kind words and support 😊 hope others find value in the video as well.

[@gensan112]

I have the same issue, too big shock mount.. could you please send me the Amazon link of your? Much appreciated..

[@homestudioacademy]

@@gensan112 here is the link to the shock-mount: amzn.to/41sNH3z

[@Christoven]

Thanks🎉

[@homestudioacademy]

You’re very welcome! Glad to help 😊

[@SvenDesigns]

Nice channel, keep it up :)

[@homestudioacademy]

Thank you so much! I appreciate your support 😊

[@gensan112]

Very useful video thank you so much! I like your shock mount on the nt1 4th gen.. what is it??

[@homestudioacademy]

You’re very welcome! Thank YOU for leaving a comment 😊 Even though the Rode Shock-mount is great and very effective, I found it to be a bit too big to be on camera. It would take a big chunk of the camera shot so I just bought a standard shock-mount on Amazon for talking head videos like this one.

[@ronitdalal150]

can u also make a video on pro plugins like waves or uad 😃😃❤️

[@homestudioacademy]

Here are some of my tutorials using Waves and UAD: How To Record VOCALS With The APOLLO TWIN + UAD kzbin.info/www/bejne/i3W6hHWki5WimK8 CLA VOCALS - The BEST vocal plugin for singers? kzbin.info/www/bejne/a5KppIZ8prF6jbM Hope it helps! 😊

[@chriscarrillo967]

anyone have any plugin recommendations for this same process towards a Rode NT1 but using Ableton Live 11? thanks

[@homestudioacademy]

I would just use the stock DeEsser, EQ and Compressor that comes with that specific DAW

[@priyanshuprakash290]

Hey 👋🏻 Wanna ask you something...I have a Apollo Solo and I want to connect 2 headphones to it for tracking vocals of my artist, and there is only 1 headphone connection on the interface and I don't have monitors... Is it possible to do that please let me know.... thank you

[@homestudioacademy]

I believe the solo only has 1 headphone amplifier on the front. You might want to try to plug the second headphones using one of the outputs on the back but it might only come through either the left or right unfortunately.

[@priyanshuprakash290]

@@homestudioacademy no problem

[@homestudioacademy]

@@priyanshuprakash290 I'm not 100% but it's worth a try. Let me know how it goes.

[@SuperSamsosa]

Easy buy a multiple headphone amplifier like the behringer ha400. Cost around 20 Bucks.

[@geneleoneii3013]

I'm honestly thinking about moving to a new mic. It seems the Nt1a has a significant bump in frequency in the 5-10kHz range which is almost uncontrollable. It's so sharp and aggressive on pretty much every singer I've used it with. I can even hear it in your dialog in this video. The syblance is crazy aggressive. My de-esser can't even manage it without the entire track sounding crushed. I'm not sure why they've done this. Maybe to try to give the vocals shine, but it doesn't, it's just harsh and annoying. If you listen to professional mixes, none of them have this high end boost.

[@homestudioacademy]

@@geneleoneii3013 I’ve always preferred the NT1 4th Generation because of its flatter frequency response which compliments most voices without sounding harsh as the NT1A

[@3thirrttyy]

My mic is the ecm87 and is meant to sound similar to this mic if not identical. My mics dry take sounds nothing like this level of clarity someone please help me. even with an EQ this dry take examples in this video sound way clearer than mine. I think my audio interface is busted however when I press the monitoring on my scarlet audio interface I can hear my self on top of the logic monitoring and the monitoring from the audio interface sounds 100 times cleaner than when I turn the logic monitoring on. Someone please help

[@homestudioacademy]

You can definitely apply these principles to your mic and adjust accordingly. In regards to your audio interface being busted, I don’t think it’s the case because you’re saying it sounds cleaner than the playback from Logic Pro. In which case, I would mute your vocal track in Logic Pro and just use the direct monitoring from your interface to hear yourself as you record. Also, if you feel like your mic is not sounding clear, here are a couple of things to consider: 1. Make sure you’re turning on phantom power (48v) on your Scarlett to power your mic since it’s a condenser mic. 2. Ensure your recording at a healthy gain level (-18db to -10db): meters should be lighting green and at most peaking at yellow to ensure the mic doesn’t clip. 3. Get good mic placement. Avoid recording right up against a corner or wall to avoid bass build up and reflections. Hope this helps! 😊

[@AtaritateStories]

what audio interface do you use with the NT1?

[@homestudioacademy]

I use the Apollo Twin but have tested many interfaces here on the channel. Here are a couple of reviews: APOLLO TWIN REVIEW: Is It Still Worth The Money In 2024? kzbin.info/www/bejne/e16XgZesf79pm7s APOLLO TWIN vs CONNECT 6: Which Interface Should You Buy? kzbin.info/www/bejne/nKOck5ydh5yUg7M CONNECT 6: A Game-Changing Interface! kzbin.info/www/bejne/qXiYkKSvj8uAl9k EVO 4: BEST VALUE INTERFACE UNDER $130 kzbin.info/www/bejne/Y2euqH-FaNJjfLM AUDIENT ID24: BEST VALUE INTERFACE UNDER $400! kzbin.info/www/bejne/hIbVhHyBj9ymo6s APOLLO TWIN vs AUDIENT ID24: Which Should You Buy? kzbin.info/www/bejne/rnXLhnqMbJdqZ80 Hope it helps!

[@AtaritateStories]

@@homestudioacademy i didn't expect you to respond so quickly! i'm gonna buy an interface later today and you helped out a lot. Thank you!!

[@homestudioacademy]

@@AtaritateStories you’re very welcome glad to help!