How To Modify Andis T-Outliner Trimmer | Custom Skeleton Trimmer | Cut Your Own Hair

----------- CONNECT -----------
•📷 Instagram: / ceonthemaking
•📬 Email: [e-mail]
How to modify your Andis T-Outliners into skeleton trimmers.
See how to adjust your Andis T-Outliner blade here: • How To Adjust Andis T-...
Links To Purchase The Tools Used In This Video
Dremel: amzn.to/2JRt64m
Andis T-Outliner: amzn.to/2lltE3R
Link To Purchase Camera Equipment Used
Canon T6i: amzn.to/2MIY8cz
Instrumental belongs to www.newyorkbang...
#Andis #TOutliner #ZeroGapt #CustomTrimers #SelfCut #BarberLife
The product links included may be affiliate links. Affiliate links mean I earn a commission from qualifying purchases. This helps support my channel at no additional cost to you.

[@legacy4179]

If you're looking for extremely crisp lines use the rotary saw to outline your beard instead of the trimmer.

[@MenTalThePoet]

Lol!!!!!

[@TionDaDon]

LEGACY 😂

[@mistabozack8258]

😅👊str8 up. Them scab lines last alot longer!

[@MenTalThePoet]

@@mistabozack8258 😆😆😆😆 yes lol

[@vashon4775]

@@mistabozack8258 😂😂😂😂😂😂

[@IAMSPECKTAKULAR]

Andis might as well sell these Trimmers like this I mean everyone doing it

[@The_Quaalude]

Too much of a liability having the electrical components exposed

[@CEONTHEMAKING]

DOPE MUSIC 🔥🔥🔥--------> kzbin.info/www/bejne/iXWppWmYpZKFjpo

[@mattcola552]

Great video! The one thing that I don’t think was mentioned but personally after the cut is finished and all of the left over plastic is removed I like to go around the edges with some sandpaper. It just gives it a smooth finish/look.

[@CEONTHEMAKING]

Facts!

[@giggityeffyou]

What's the point doing this?

[@billymiles2635]

@@giggityeffyou cooling and getting a little closer on the line especially in the corners like around the ears.

[@jeremiahmcdowell7680]

Absolutely, in order to have that smooth feel and just for safety of cuts and fragments possibly flying

[@offwhite5346]

@@billymiles2635 wouldn’t hair get in them??

[@oxymoron9081]

Yes, it is to keep the trimmers ventilated/cooler. ☺️. Barbers are the only ones that cut in high volume over a long period of time. They become hot.

[@92keyz60]

As soon as he pulled out the saw I said nevermind

[@TheBiggest7.62]

MainAttractionProductionz pussy

[@ltwadley7619]

Same thing I said, lol. I might as well buy a whole new trimmer, sheesh!

[@92keyz60]

C. Moore shut up bitch

[@RellybeThebest]

Yea onto an easier video.

[@RealMitchyyRow]

lmfaooo

[@kennyware6506]

Mane how u get yo fist so flat 😂

[@750creditscore]

Kenny Ware lol

[@kennyware6506]

Just messing with u mane great video man

[@CEONTHEMAKING]

lol

[@tonypeters3320]

😂😂😂

[@iOWNyouFOOLaskYOmama]

Mr. No Knuckles 😂

[@chahrlzel13]

I found that if you cut your T- Outliners off when you step back and look at the line up or every time the Trimmer comes off the clients head you can use them all day with out them over heating.

[@maximo5737]

thank you for make this. How do you keep dust from getting into them . Cheers?

[@Yadjel410]

Its more used for when you’re lining up behind the ear so you won’t have all that bulk when you’re holding your clients ear down

[@AwesomeMan2696]

one of many benefits

[@Rush-oh5bq]

I get why you would need to do this, an it looks so dope when you do it.

[@Airmanmx1]

Skip to 3:50 for actual beginning

[@deedixon1729]

thank youuuuuuu cause wheeeeew

[@bigmooga2786]

Is this really going to make your lineups more crispier?

[@JPortoProducer]

treating those trimmers like a client. nice cut.

[@CEONTHEMAKING]

Haha

[@Richmanholla]

I heard it was for quick and easy adjustment of the tension screw

[@csjr9]

Just drill a hole right over the tension adjustment screw and don't cut the body. That way you can adjust the tension without having to take the top half off or cut the top half of the body.

[@stixx1845]

It is you’re exactly right all these other donkeys don’t know what they’re talking about.

[@opmike343]

Andis and other companies are asleep at the wheel if they don't start rolling out models like this. Visibility is huge with outlining.

[@Gm29_mtz]

Just push the ear down

[@toohotcp]

I use my outliners to bald my head. I needed to modify them like this in order to more regularly adjust spring tension and keep them clean. It is kinda weird they don’t just sell them like this

[@kareemabdul3773]

Now they do lolz and cordless

[@abrahamaning1233]

THANK YOU VERY MUCH MY BOSS I HAVE LEARN SOMETHING FROM YOU NOW MAY ALMIGHTY GOD WHO CREATED HEAVEN AND EARTH BLESS YOUR HANDS WORK FOREVER

[@CEONTHEMAKING]

Amen

[@jaythefirst2841]

Lmao u doing too much

[@jaggerdenmark7327]

Why you speaking in all caps.

[@jayhari1713]

@@jaythefirst2841 lol fr right

[@oscar.0reo359]

Can u do the same with the wireless version of these trimmers???

[@CEONTHEMAKING]

I'm not sure. i don't own the wireless ones

[@LilRobby]

Can you fix those exact clippers out the box how they look when they’re fresh out the box. If it vibrates so loud now like rattling with a flathead screwdriver? If so, how? Pls

[@TheBiggest7.62]

get a mini hacksaw from home depot they’re like 5 bucks

[@sadlyparanoid7869]

this helps a lot i personally didn’t use a saw i used a kitchen knife took about 20 minutes 😂

[@CEONTHEMAKING]

Hey whatever works! hah

[@christophermendoza8546]

Thus gonna be me with a torch tho gonna cut like butter

[@plocobdmflyboy]

Loooool

[@mvrdamonxy7942]

Just sitting here trying to work up the courage to cut into this $90 trimmer.

[@La_abbess]

Just do it cheapskate 😂

[@mvrdamonxy7942]

@@La_abbess being cheap is how i got my bank account on swole 😂🤣😂🤣

[@jonatans.5080]

Is there any real benefit in modifying it ? Other than looks ?

[@mvrdamonxy7942]

@@jonatans.5080 you can see where your cutting easier apparenrly it keeps the blades cooler but i know it works good for being able to see like cutting behind a ear

[@jonatans.5080]

@@mvrdamonxy7942 i just did mine , now i need to replace these china blades ... can you recomend some ? Good quality

[@SilasAram]

What if the hairs go inside the plastic housing?

[@hightiergamer5558]

Awesome video keep going man God bless you

[@1ladylane]

Thank you so much for this video!! I was wondering how this is done.

[@SkidCudi]

Can you use the t outliner for shaving

[@davidnunes3751]

what about hair falling to the machine? does it causes any problems?

[@CEONTHEMAKING]

Nope. no issues so far.

[@DanDan-xr4ke]

No they are designed to withstand that

[@frankielove7228]

I Just Modified My Andis Trimmer Thanks

[@RealMitchyyRow]

i usually just unscrew the metal clip at the top and call it a day..does the hair fallign inside the machine cause any problems ?

[@CEONTHEMAKING]

nah not at all

[@keithhuey4414]

My T liners after I skeletoned them they have a bad vibration. Before they ran way smoother what did I do wrong?

[@LaughingStock_]

What did you do wrong? Well, you took away 1/3 of the body-shell. Try doing that to the front of your car and see how she feels. Utter stupidity. Sorry.

[@zealchristian799]

Why do you have to cut it. Is that how it done? I'm looking forward to buying one as well.

[@thomashicks_1988]

You’re the goat bro! 😎🙌

[@pressplay3735]

Does this extend the life of the blade?

[@CEONTHEMAKING]

no

[@pressplay3735]

@@CEONTHEMAKING So whats the point in it?

[@justfrase]

I have a different version where the top screw is closer to the top.. if I cut under the too screw it might damage the clippers?? Can anyone confirm they've do it on the newer clippers the one with the blue logo lights up..

[@omidcutz]

Is it possible to modify the Andis Styliner M3 like this?

[@CEONTHEMAKING]

ive never seen it.. maybe you can be the first lol

[@noahno]

Do whatever tf you want, lol. Theyre literally pieces of plastic. Take it apart and figure it out. Not rocket science by a long shot

[@AztecRay]

Man. I have had my same trimmers for 12 years. I can't cut them.

[@familyfirst7027]

I had mine for 20 years lol.i got the first series

[@josiahcarby6286]

Y’all old

[@vincestyles1030]

I throw them out every 6 months these are industry standards but they suck been using them for 10 years I do 20 cuts a day they get so hot so I have a spare as well.

[@mauricerichardson6530]

Vince Styles since when do the industry tell you to throw out your clippers every 6 months just curious?

[@vincestyles1030]

Maurice Richardson when they stop working properly I don’t have time for broken equipment.

[@Planetugm]

Thanks for the tutorial bro 👍🏻

[@dontarguewithtrolls]

Keep going bro this is for you. NY Bangers!

[@allenchristopher8095]

can i use a jig saw?

[@CEONTHEMAKING]

yep

[@clrkkdd12]

Thank you player👊🏽

[@anthonyg4073]

Maybe close up of the clippers.

[@zeerogers6213]

Great Video 💪💪

[@Ryann_0718]

Hey I need help I don’t really know a lot about these but I bought my first pair of these off eBay. They are brand new but the person modified it and zero gapped it. The problem I have is they vibrate like crazy is that how they are supposed to be?

[@cmoneytheman]

kzbin.info/www/bejne/fXfJo3drfMxpldU

[@cmoneytheman]

or try this I got these I used this vid for my styles so if the first link dont work use this one kzbin.info/www/bejne/a5CylIGubJmgpqc

[@laschell59]

They get so hot and when store bought. After they run cooler

[@MnHondaSi]

DYI-n-SAVE-FROM A-Z ,??????

[@8888PIPS]

is there a way to modify clippers? as they tend to get hotter

[@uhhFez]

Good video bro thank you! 🙏🏽but ya left hand freaking me out.. do you even have bones?

[@CEONTHEMAKING]

Lol

[@Koolandezzy]

Very helpful 👌 for me

[@chrisgomes2554]

Model g?

[@sto2779]

4:00 I was expecting to remove the cover then cut it...

[@shanra4764]

Good looking out bro.

[@donebynonebarber1258]

Hopefully i can find those here in the phillipines lol. I hope you can also have some advice for me

[@DAB901]

Andis finally took heed to what ppl are doing and made some like this out the box. They want $250+ for em’ tho. 😬

[@sikwitit773]

They also made a Andis 74100 GTX-EVO Professional for like $160 but they selling modified zero gapped corded andis gtx for $104 on ebay and $125 at barber nation

[@AngleCorp7Music]

what's the name of the beat. trying to find it on their website

[@CEONTHEMAKING]

I can't even remember. Sorry

[@AngleCorp7Music]

CEONTHEMAKING no problem, it's called "Legend"

[@kareemabdul3773]

Yeah you making a lot of sense !!!

[@cheetez5456]

does not hair come into the motor when its skeltonized?

[@CEONTHEMAKING]

nah not really i only use it for edge ups so there's not really much hair they can get in there

[@cheetez5456]

@@CEONTHEMAKING okay, I use my outliner (not skeleton) to put in the baldline and take off bulk under the bald line so I can come with the shaver, people say that will tear out the blades, is that true?

[@niralapersad4349]

how to stop my andis t outliner from getting hot so quickly

[@DHKKOBE]

i have them and they be cutting my skin what should i do

[@CEONTHEMAKING]

probably have the blade adjusted too close...try setting them again

[@nolimitslim4701]

Thanks

[@phillipsaunders5638]

This beat too clean 🔥

[@jonathanburnett8076]

So basically I gotta buy a damn saw 😂😂😂

[@lexthebarbuh]

😂😂😂 this is funny. & Yes. Looks like we gotta buy a damn saw.

[@bighomieJ5X]

Any tips as to why the trimmers get hot too fast ...like 10 minutes can't even hold them ..🤦🏾‍♂️🤦🏾‍♂️

[@opticaljr]

BighomieJ5x - are you using cooling spray on them?

[@bighomieJ5X]

@@opticaljr yeah on the blades ,but the middle be hot where the motor is 😯

[@opticaljr]

BighomieJ5x - what clippers you got? Some seniors?

[@bighomieJ5X]

@@opticaljr andis t outliner

[@opticaljr]

BighomieJ5x - have you tried what he did in the vid? Those things are know you get hot

[@kareem8064]

I actually took too much off but it still look straight

[@ChrystalClear]

Thx

[@LeekBrimah]

As Salamu Alaykum bro, I was thinking about doing a channel based on waves any advice on how to stand out

[@CEONTHEMAKING]

celticeagle1000 Walaikum Salaam bro. If you're serious, I would say invest in the tools needed to get your channel going. After that, find a way to bring your own spin to the wave game. Maybe cover topics you notice other channels lacking etc. Aside from that, just take pride in what you produce! Hope that helps!

[@thealphanoid6160]

Put your own personality in your craft. Show people your unique approach to waves. Everyone has something to offer, show them why they should tune in to you. Im a former marketer and research developer.

[@unicdelmore4382]

Saw? Oh never mind bro

[@MalachiVereen]

3:41 you better rhyme!

[@adrianbaltazar4874]

I don’t think his knuckles are supposed to do that! Lol

[@StillAutomatic]

😂😂😂😂😂 I started dying outloud when I read that

[@adrianbaltazar4874]

Jevone 😭😭

[@yttraposama7849]

Imma just take it back after

[@saiyanultrainstinct551]

I used a fine tool or oscillator saw the saw you use is to dangerous if you don’t know how to use it it would be better if u had a little guard or something

[@xenonram]

Nah, it'll be fine. If you don't have the ability to do it, that's fine, but don't project your inabilities on other people. And it's called a Fein tool.

[@cassanovastone9982]

Thanks bro

[@CEONTHEMAKING]

💯

[@jeffreykirton1780]

He used the saw to line up the liners

[@andreluisdosreis5229]

Quero trabalhar divulgando ,fazendo propaganda da maquina o que devo fazer .

[@928dawson6]

This video is 3 minutes longer than it has to be! My god man get to it!!!

[@CEONTHEMAKING]

Relax my brotha.. you aint miss out on anything in them 3 minutes. I promise.

[@928dawson6]

@@CEONTHEMAKING You go straight to the hot place with that foolishness bruh!!! You don't know me bruh. Stay in your lane!!!

[@jamesrobinson4950]

I'm going to do this to my Masters 🤔

[@CEONTHEMAKING]

how?? A chainsaw? lol

[@jamesrobinson4950]

@@CEONTHEMAKING 😂😂😂blowtorch

[@slumdawg1992]

Ok so i literally just modified my tlines with a kitchen knife took me 5 mins

[@GuillermoHernandez-mu5mj]

If you're efficient they don't get hot. Hacks barber school students, and rookies worry about their clippers getting hot.

[@CEONTHEMAKING]

Im not a barber...just trying to help the DIY'ers

[@jaquanjasper3664]

Ummm why wouldn’t you take them apart first?? 🤨🤨🤨

[@Jped277]

Ur blade is on the rotary tool backwards.

[@CEONTHEMAKING]

😂

[@Jped277]

@@CEONTHEMAKING not trying to be a jerk lol. Just thought I'd mention it

[@BEM_01]

What's the difference between this and slim line pro

[@CEONTHEMAKING]

i got a comparison video between the two.. check it out

[@BEM_01]

@@CEONTHEMAKING Thanks man! I'll watch it now.

[@christianloera9413]

1:30 that thumb did sum shit

[@huybsolame]

son love talkin

[@amoulet69]

3:53 to save you some time...

[@closg1930]

Works great

[@kingw1280]

Just buy them.

[@DwightCastillo]

0:53 your right hand looks weird!

[@928dawson6]

Or just use a $3 hacksaw

[@cee4788]

I saw the saw and was like tf

[@jonathanmoore8495]

Nice explanation great talking but horrible camera work please understand your audience need close ups of what your are doing

[@marloncoley1810]

Who cares

[@kingjames3009]

Anybody modify in new York?

[@CEONTHEMAKING]

if not, you can purchase modified trimmers off eBay.

[@alfredoibarra9825]

That Chicago electric rotary is garbage. Walmart has a corded one for same or lower price that works good.

[@cujosandlot8233]

Boy got gorilla knuckles ain't it

[@gaffle-411]

It may work well but what an uGLy modification just for better performance...

[@MnHondaSi]

DJ GaFFLe negative.

[@g4ster1]

Just for future reference. The video is good, but I'd rather not stare at your crotch the whole time. I understand what you were trying to do though.

[@NewMovesProduction]

Lol what!? Didn’t even notice 😂 bro look at the clippers. Wyd?!? 😆

[@IntegraDIY]

I honestly didn’t even notice, I was thinking and focusing on the trimmers the whole entire time.

[@dfelixrx7]

Integra DIY - Save that for the Judge 👨‍⚖️

[@ahlvx1235]

Nigga you just gay

[@ladycheyne5607]

Speak for your damn self. Why are you ruining it for the ladies🤬🤣🤣🤣(Just kidding)😉😊

[@bryannforeman935]

You repeated yourself several times before the actual operation. You could’ve shaved 2 minutes from this vodeo

[@LaughingStock_]

Errr, no. Utterly pointless - though SUPERB for clogging the inside with more hair.

[@Milliondollarbounty]

You talk to much

[@CEONTHEMAKING]

You hate too much

[@Neopanther]

@Milliondollarbounty g shut the fuck up

[@montestaxxx3479]

You take way to much

[@elbadboy809]

i got 2 of my 4 T-line andis like that, I modify my like 3 years ago

[@sdhydro7152]

can you do the same thing with the andis gtx , since they have they have the same body?