How to Modify the Nerf Elite HYPERFIRE [Modification Guide]

This is my mod guide for the Nerf N-strike Elite Hyperfire. In this modification tutorial, I teach you how to increase the power and rate of fire of your Hyperfire.
Naptown Nerf: / @naptownnerf
If you liked the video, make sure to comment, like, and subscribe.
email: [e-mail]
my webstore: mag212nerf.wix....
Facebook: / mag212nerfmods

[@stephenratliff486]

It worked perfectly except you misspoke when referencing the wires to solder on the access door. The correct wires are yellow and purple not the yellow and brown. Otherwise awesome tutorial!

[@Acer-il9wi]

Stephen Ratliff he had meant the yellow and ground wire

[@sumansharma9735]

If I new that my hyperfire wouldn't be in the trash

[@narenthebeesechurgerman422]

suman sharma is it that hard to solder and get new wires?

[@ishaansharma8164]

@@narenthebeesechurgerman422 true bro

[@kingdstaprules9416]

I did the yellow and brown wires and sat looking at it wondering why the fuck it isn’t working until I saw your comment

[@chadkoutalidis9857]

I love how at the beginning of the video, you show the gun firing with modifications, and what your going to be doing during the video. Most of the Toy gun KZbinrs I watch don't do that, but you were the first one I've seen.

[@LuisHenriqueDT]

I did it here in Brazil, it worked and the difference is monstrous, you need to make a correction in the video about soldering the yellow and blue wires (to prevent others from burning their blasters), excellent!

[@thepump2271]

Mag212 you a exceptionally good at explaining and keeping it to the point. Excellent work.

[@tanksniper380]

Mag212 is the best channel out there for mod guides! great job with the tutorials man :D

[@joshsmotroff7017]

OMG! I am never this early! Mag if you reply it would make my day. I have watched almost all your videos and you are one of the best nerf channels i have ever seen!

[@mag212nerf]

Have a wonderful day :)

[@noahheise7749]

Dude! You deserve SO MANY MORE subs!

[@PirateJohnson]

YES.

[@alexmylonas2954]

i know i agree

[@den41400]

Agreed

[@Matt-md5yt]

this is a good mod. just like watching videos like this. when you took it apart I was wondering if you could replace the barrel piece for the one to use muzzle attachments.

[@mag212nerf]

Other people ran into trouble when modifying the Hyperfire...I didn't have any problems :)

[@crazy_creator6144]

hey mag, u got one for the stryfe?

[@djbeb881]

um like 1 min into the video WHY DO YOU NEED TO FIRE THE BLASTER WITHOUT A MAG IN IT? *POINTLESS!!!*

[@mdsva]

If you have a dart stuck in the cage, it can help to push it out.

[@allthatlaugh8733]

Wuz up

[@daelemandap]

U said flip off the plate

[@nickn.5004]

wow your voice changed a lot from your older videos

[@CloneCreepProduction]

lol, right?

[@narenthebeesechurgerman422]

PUBERTY

[@JohnMichael-hq1el]

Agreed

[@gregorybenton2568]

I just got mine. I've been doing mine with 8x AA trays as I hate ordering batteries. It gives almost the same performance and it's pretty much plug and play. Great job Mag212!!! Also I emailed you about the full auto centurion a while ago. If it's still available, I'd like to purchase it.

[@KlotzProductions]

I am planning on running mine on 8x AA rechargeable batteries (for about 10.4 volts) as well. Have you had any problems with yours running it all stock like that? How much have you used the blaster this way?

[@ben_nerf_lego]

@@KlotzProductions i use it 6x aa and it works fine and dont overheat

[@thalescustodiopro]

@@ben_nerf_lego How do you place the AA batteries?

[@ben_nerf_lego]

@@thalescustodiopro I use a case with contacts in it

[@assuredbag822]

Awesome man.. From older experience I ready know how to modify electric blasters, but it's cool to see how others do it as well

[@nickstorz1378]

Wow, great content. Mod guide quality and level on par with Coop772 and other KZbinrs with 500K+ subscribers.

[@heavystarch100]

Simple and straightforward.👍

[@mag212nerf]

Thanks :) That was my goal, after all.

[@harveybarton7555]

mag212 dang this thing is insane

[@regianeduarte2000]

Bro I did this to my hyper fire easy mod and rate of fire is crazy thanks for the video 👍🏻👍🏻👍🏻

[@NaptownNerf]

Nice mod guide. Thanks for the linking my channel. Still need to mod my own. So many mod, so little time.

[@datastorageable]

Used this to fix a problem with the jam door. Thank you.

[@robertfreeman6082]

Really easy to follow video. I just used it to get an idea of the internals as I bought an apparently now working one from a boot fare. The pusher wasn’t working but flywheels spun. I used the vid to remove the mag and jam door lock to simplify things and seemed to get power back. As people have noted probably a non activating lock can cause you problems. Only thing I noticed was that the gear wheels in the pusher motor assembly appeared to have no metal pin /spindle so no idea if they are supposed to have or not or whether the friction it with the pusher belt/jam door just keeps them together.

[@robertfreeman6082]

Edit - my bad, looks like the spindle stayed in the shell half I took off !

[@pkfiremkice1883]

Are there any downsides to this modification? My friends discourage me from modifying flywheel blasters for fear of burning out the blaster.

[@Cringemoment4045]

The reason why is they think so is because of the batteries. Most motors need lipo to function and perform. There are no downsides btw

[@crispybiscuitz279]

What kind of wire was used for the motor and battery?

[@brucecantrall516]

Thanks dude I'm totally going Fix up my son's Hyper fire.

[@raincomedown_]

How to do the access door lock removal with legos You need 1x3 piece an 1x2 flag piece put the flat piece on the 1x3 Turn it upside down and have the flat piece ur direction Insert it and *BOOM* time saver

[@johnbauer9604]

Saw your video and just had to like.

[@tpeden7259]

omg i just finished watching your old jolt mod OMG

[@melo5864]

What batteries did you use and where can I get them

[@End3rW1z]

Thank you for the mod video, as my Hyperfire works and has faster firing rate :D

[@evanduplessis9911]

The access door lock removal was pointless Since the pusher mech is in the jam door and if the jam door is open the blaster will not fire anyways

[@narenthebeesechurgerman422]

Evan Duplessis it’s not, it makes rewiring easier

[@bram119]

Thanks. Love your guides

[@traktorized3640]

That R.O.F is ridiculous

[@xtrem5428]

It's safe to increase the voltage without changing the wires? Huh.

[@Ulfie_]

Voltage yes, amp draw is another thing but for something like this, it should be fine. If you're worried, completely rewiring with a higher guage is a good idea

[@KTN_22_]

I know im very very late but can you tell me what tools you have in all

[@runesrensen8551]

im getting one tomorrow. gunna modify!!

[@fabiomeschini5618]

Want’s the correct total voltage of the new battery pack? Btw thanks, awesome channels and awesome projects, congrats!

[@sstalon]

Awesome video. Question for ur battery replacement part. Could in theory I use a Milwaukee m12 battery holder and battery instead?

[@jacob.peterson]

This was a really well made video and it makes me want to get a hyperfire because of its mod potential but there was something throwing me off. U were being a little to wordy and didn't really need to use a large amount of words, that is makes some channels not as popular because people start to fall asleep on ur videos but other wise it was a great vid I hope to see more

[@averito9130]

I just got a brand new hyperfire for my birthday...

[@prestonlongoria6875]

How does putting 3 AA batteries help? that would be less voltage and less amperage

[@spaceyishere0]

You need specific batteries, those being trustfire batteries

[@lukemehalick370]

Thanks for the guide. Was wondering if it's possible to convert the batteries to a higher voltage? We (me & my Son) have a lot of 6v & 7.6v batteries for rc cars & was wondering if there is a way to use those instead? & If possible how would I go about it? Thank you!

[@appuu009]

Where are u now? Please make videos.... where did u get the saw? The heat saw the thing

[@lizseay4511]

You are good at stuff ☺

[@bahalenchampia1358]

2:33 told yellow and brown but connected yellow and purple

[@grathic99grathic60]

Hyper fire I think is like a sub machine gun for raiding and stuff

[@doneritecarpetcare]

Great stuff! How about the rev trigger spring. Is there a trick to reassembling that? Can't find any videos about that on KZbin. Thanks!

[@f2-stu462]

I’ve followed this guide in terms of the wiring modifications, but using tamiya power dash motors and a 2s lipo battery. Gone over it 10 times and the Darn thing won’t work 😔

[@wesleydehaas5998]

For the people who did this mod, how are the blasters motors holding up with the massive over volt they are getting? Sorry for my English I'm still learning.

[@OllieTabooger-WoneChu]

Not3 : you can wire the blue to the purple

[@twosiwel6609]

Man this kid is smart where did he learn this

[@MarksWorkshopcrft]

You said solder the yellow and brown wire together did you mean yellows s blue? 2:33

[@bottomgear4028]

What kind of ranges does the hyperfire get in modified form?

[@OatmealDonk]

what exactly did you do to make the motors perform so much better, and could it not damage it performing so much faster over its design limits?

[@ItsyaboiDillon]

Is that circuit board around the battery area necessary or can I take it out?

[@randomuslygenerator1518]

Uh, mag I have some problems because no darts are shooting they all get stuck in the motor cage

[@SaraRoybal]

Thank you so much! It at actually works!

[@Scullcat]

If i do a voltage mod without doing anything to my motors will it be okay or will it end up breaking?

[@bryantenjhay65]

You can get D to AA battery adaptors and have rechargable AA batterys

[@FulKounter]

I have one of those holiky off brand nerf blaster like the nerf srtyfe and was wondering if you had a mod to make the 3 burst and full auto setting but the darts come out super slow .. is there a way to make this holiky blaster have a higher rate of fire ??

[@djorbitz]

did you use 2 imr and 1 dummy or 3 imr? does it work without rewiring? thanks in advance

[@nickstorz1378]

Just throwing in the IMRs without removing internal resistors or thermistors will not work. These components limit the electricity the blaster can handle. If you leave them in, the resistors won't allow that amount of power and it will turn off automatically.

[@aldomoronelson4945]

Great job

[@totaltrackbikehire-ownedby4688]

Hi there, Why do you remove the circuit boards that control the flywheel motors? Are they weak and burn out if you just add good batt power? I have added some good batts and get a wicked performance without removing the circuit board.....but will do it if it needs it

[@pofrani]

Hi - did you end up removing the circuit board or kept it?

[@marcgonzalez9690]

Please update

[@AlexTheTech]

remove all that shit, and do MTB's rewire for the rapidstrike since there both full auto

[@Allmeo83]

if you are gonna do this you might wanna extend the "teeth" on the conveyor belt så it accepts crappy darts :) its an easy fix and make´s it so mush more fun

[@marcgonzalez9690]

Allmeo83 care to share how to achieve this?

[@troublingsailor6040]

awesome video

[@Nate.mp4]

If you skip the resistance removal of the flywheels step, will it still function well?

[@anthonyhadsell2673]

Performance will be improved however not as good of an improvement as if you removed them

[@huokuziinc.4333]

Couldn't you just use a aa to D battery converter and use 3 imrs and 1 dummy inside?

[@ericcartman597]

IS THERE ANY MODIFICATION GUIDE WITHOUT A SOLDERING IRON????

[@madisonpohlman877]

But what happens if I do unscrew the white ones

[@hakkeshsingh6145]

Is it possible to use the stock 4 D batteries with this mod? Where I am batteries are cheap and I can afford the stock 4 D batteries

[@kaismith9388]

I just want to modify mine so the voltage is better. I've had my hyperfire for two years and it performs awfully now, barely shooting more than two rounds per second even with highest power batteries. Do I need to follow every step or just the voltage mod for better ROF?

[@jeremyboland2695]

Can you send me a good link to the batteries you recommend. Way to many options. Thanks

[@felipejc7454]

bro i followed every instruction on your guide, for some reasons the blaster isnt working, i also wonder what happened to the purple wire on the door lock and the black wire on the mag lock

[@lalshortshot2051]

katniss felipe nothing

[@benkessler4439]

he meant the yellow and purple wires on the door lock...

[@burtonhatch1057]

If your follow this guide, your GUN WILL NOT WORK unless you solder the yellow wire from the conveyor door switch to the positive motor wires. The brown and red wires from the switch are not needed. That's if you are bypassing the door switch and also rewiring the motors. He doesn't tell you this. I found out through trial and error.

[@pilarpolk]

Nice quality

[@pofrani]

One question - why did you remove that circuit board from the two motors near the barrel? What does removing it achieve?

[@AlexTheTech]

Less resistance, but this mod guide is stupid cause he still has the other board connected, he should just directly wire everything like I did. works great!

[@magicman1656]

what about the black and purple wire? are they judt free floating?

[@yvan2w880]

very good video

[@TheBlackEventorizon]

Is there any reason you need to remove the first 2 locks? I can't see a reason to spin up the motors if you haven't got a clip in, or a reason to spin it up with the breach open. Or do they somehow effect the rest of the guns mechanics...

[@kingdstaprules9416]

Because sometimes they don’t register properly and when you have it in it won’t work I had this problem for a couple years until I did this

[@romolodeluca6082]

Hey bro try modifying the nerf rival khaos. Trust me it's really intense.

[@alphakennybody469]

Do you need to strip and sold the wires

[@regianeduarte2000]

If I just sodor a 9volt battery in the will that work

[@barneynewson9045]

Can you please move to LiPo, the reason you didn't have any problems is probably because the system wasn't being put under any torque. 14500 cells can't put out enough current to run 3 motors effectively. A motor swap would not even be necessary, a small 2s LiPo would run the stock motors just fine. Foam Data Services has a couple of great videos explaining the benefits of LiPo vs 14500. I just hate to see your great external modifications not match with the internals…

[@siafu-1764]

where did you get that wire to connect the two motors

[@andersorr8775]

Did you mean yellow and blue wire when you said yellow and brown

[@loganltn]

What kinds of batterys should i use? a saw IMR and surefire but there are like a million different types of batteries and idk what one to choose.

[@cheezitguy5273]

Quatos games IamBobolo made a video on all them batteries from 9v to LiPO just watch his vid

[@ankit2459]

instead of solder can we use electric tape

[@CyBearOfBearBros]

How is it firing at a faster rate? There were no modifikations to the pusher O_o

[@adamsliwa6719]

How battery you use and how much ?

[@danieldaly94]

for the black wire do you sauder to spring or plate?

[@deadbunny2938]

Wouldn"t AA to D battery adapters also work?

[@F4ppy]

hey mag212, only doing the motor rewire and the battery/voltage modification should work too, shouldn't it? also, did you use any special cable to rewire / metal to contact everything? and do you use normal batteries in the end or some special ones?

[@ISattar]

yes it should because locks dont decrease performance also he used IMR's but you could use trustfires or ultrafires

[@MauroZanotti65]

The firing speed has no changed why???? For me that proof is from another nerf

[@haizhanghost1851]

Mag please can you answer me. It doesn't works.Which wire i must solder (AT the Front)I soldered the Red to the positive and Brown to the negative

[@haizhanghost1851]

OMG IT WORKS THAAAAAANK YOU I SUBSCRIBE FOR SURE

[@antifffusion_2536]

wouldn't the performance of the blaster be decreased by adding double AA batteries instead of D batteries? does the blaster last as long before needing to replace batteries?

[@mistypikku]

the specific type of batteries he uses have more voltage

[@flywheelmadness6710]

what size of motor is the pusher plz answer

[@linussextips2882]

Do you have to sauter the wires or can you use a small piece of electric tape for removing the maginizine lock?

[@MAL1GNANT]

Personally I twisted the wires together and used tape. No problems.

[@archives903]

does this actually work because i am considering doing this but i am a bit scared

[@tictac4244]

Hi does anyone know how to remove the thermistors I got very confused

[@jalipeno97]

protip, to remove the electrical portion of the magazine lock just flip the switch around

[@MAL1GNANT]

I wish I had done this. Thank you

[@Arjun-ul3fw]

Super bro

[@BLASTERJOUANNERF]

good job :)

[@whoohaaXL]

You should learn to tin wires with flux as opposed to the way done in this video. Good tutorial though.

[@pilarpolk]

Awsome man!!!'

[@crossdfoz]

what type of imr do you use 18650 or 18490