HOW TO MODIFY THE WINCHESTER "94" TO SPIN-COCK AND FAN

[@user-mm4je1sb9b]

With the greatest respect...Your teaching would be much better without the background music.

[@rhinestoneropers9204]

Noted

[@TillerTH]

Firearm safety doesn’t apply to cowboys

[@rhinestoneropers9204]

I know you are joking, but in order to keep doing it, we have to be sure no one gets hurt.

[@ADcommenter]

Atleast until your cock gets shot off after the revolver misfires while in your holster

[@osdreadlord3205]

I've had people get weird when spin cocking my henry, and it's understandable, but the lever has the bolt open during the spin and no round is chambered, thus rendering the firearm inoperable until the lever is closed on the catch, at which point the barrel is pointed down range.

[@Ghost10077]

Only if he has a safety beer

[@sethmullins8346]

Look at old pictures. John Browning himself with his finger on the trigger. People are actually a lot more anal about it today

[@joshuawillmett4659]

Learned this for my Henry 22 just to impress my buddies. You made it super easy and fun to learn! Thanks!

[@rhinestoneropers9204]

Rock on!

[@ryanpford77]

I have a 94ae trapper/saddle ring .45colt for sale . 16"barrel

[@rhinestoneropers9204]

Really, What condition and how much?

[@sfcmp7005]

I wouldn't say this is stupid. This rifle setup was actually mentioned in the movie El Dorado, near the beginning of the movie. Not directly but I knew what he meant. You could see the big loop lever on it. John Wayne tells Robert Mitchum, "There's something familiar about that gun." Then Mitchum replied, "I just had it fixed up like you had yours. You got lucky with it, so I thought I would give it a try". There is also a scene near the end of the movie Rio Lobo where they are getting ready to make a trade of two guys. John Wayne says "hold it a minute." He then swaps the rifle he is holding for one in a holster on his horse. You can see he swaps it for a rifle with a big loop lever. I believe this type of rifle mod, was a big deal to him.

[@rhinestoneropers9204]

Thank you. I will keep an eye out for those references.

[@rigortortoise522]

On that note, it is *significantly* harder to do with a Marlin 336 haha. The look on your face when the longer rifle hits your chest is a good summary.

[@rhinestoneropers9204]

Can you feed a shell into the Marlin by spinning it?

[@rigortortoise522]

@@rhinestoneropers9204 I've only done it with snap caps to void the chance of putting a hole in my chest, but yes haha. Modified with a big loop, of course. Same technique as you'd use for the Winchester, just a little extra bend in the stance when you first flip it out.

[@JurassicVillage]

If I had a big loop lever, I wouldn't have to work anymore.

[@rhinestoneropers9204]

Not true Roy, you would convert it into a super power and you'd be working all the time.

[@70selvisfan]

These guns are still my favorite. In today's age of AR's and AK's, I'd still rather have a Winchester '92 or '94 any day! LOVE the video!

[@rhinestoneropers9204]

Thanks Elvis, I agree.

[@777dragonborn]

This was the o.g multipurpose carbine.

[@hey.hombre]

Today a large loop lever is about $125 or more. Yeah, it's been a long time since they went for $25.

[@rhinestoneropers9204]

I have people asking where they can be found. Do you know?

[@jerrynorton1080]

In later years, th' Duke had his favorite '92 shortened, 'cos as his ... vest... got bigger, he hit himself a coupla times. Hollywood had him as 6' 4", so he had a fair reach, but its harder to lean for'd on a movin' horse

[@rhinestoneropers9204]

Makes sense.

[@20alphabet]

Tore a t-shirt and got the scar twelve years ago. Btw, turn the music down two or three clicks... it's competing with you throughout the video.

[@rhinestoneropers9204]

Thanks for the comment. I agree about the music. It sounds different on my computer than it does after it's uploaded, but I'm working on it.

[@archimedesfromteamfortress2]

Is it possible to do this using an 1860 Henry Rifle? (gotta send em confederates running!) If possible, which brand do you think makes the better reproduction of said rifle?

[@rhinestoneropers9204]

I have a Henry but I'm no expert with it. The action on mine is not smooth enough to try any of this. I have a big loop for it but its not shaped right to spin. I would have to say don't count on being able to use a Henry.

[@walterkersting6238]

Nifty as frig. Does Blow Jiden know about this?

[@rhinestoneropers9204]

Thanks

[@adriangall9025]

Of course! Dementia Joe said he was a consultant on the set after he kicked Cornpops ass...lol

[@johnhoffman3488]

It would be be a good idea to tone down the music it detracts from your voice would make it better to understand what your saying. JWH

[@rhinestoneropers9204]

Thanks

[@vladimator1842]

Question: Did Schwarzenegger performed the same spincock in Terminator 2?? I remember it clearly by the way... just aren't sure if he was wielding a Winchester or some other lever rifle?!🤷🏻‍♂️

[@rhinestoneropers9204]

I believe you are right. He does multiple spin cocks. It looks like he is using a shot gun with the stock trimmed so he can use it like pistol. Usually these are called mare's legs and done with a Winchester with the stock and the barrel cut down. Here the barrel is not trimmed. After all, he is Arnold.

[@nelcirsilveira9020]

Muito bem esplicado como funciona Está de parabéns valeu amigo 👏👏

[@rhinestoneropers9204]

thanks.

[@lennassi9114]

Thanks, great instructional video. I will try it with my Henry Big Boy.

[@rhinestoneropers9204]

Have fun!

[@jerrygreco693]

WHERE DO i FIND THE BIG FINGER LOOP FOR MY WINCHESTER 94 30-30 MADE IN 1974???

[@rhinestoneropers9204]

They are hard to find now.

[@jnicksnewstart]

Put a couple of turns of toilet paper over that front sight to pad, and then wrap over it with electrical tape. Seems like a safer way to practice, and with the black electrical tape you shouldn't notice anything on the muzzle.

[@rhinestoneropers9204]

Good idea.

[@j.nicolasphillips3167]

Would a sight hood prevent it from cutting you?

[@rhinestoneropers9204]

Hi J., It seems like it would. But, It's just that first time that is a problem. You can wear an old coat the first time or just make sure you straighten out your arm so the barrel clears your shoulder.

[@Jakestarr_59]

Another fine video. Yes I had one of the newer 45 Colt Trapper models. Wish I never sold it. Fun little gun.

[@rhinestoneropers9204]

Thanks Ken.

[@sethmullins8346]

The movie gun was actually a 92. The Rossi R92 is a budget version of that made in Brazil. I have one in .357. It doesn’t have the grip safety to be removed.

[@rhinestoneropers9204]

Thanks

[@solsanguis8032]

would it be possible to just ductape that safety spring?

[@rhinestoneropers9204]

It's worth a try, just for show purposes. Let me know how it turns out.

[@jhscheppele2448]

Thee Rifleman’s web site states there was several different rifles.

[@rhinestoneropers9204]

That makes sense.

[@Saintlawrence100]

I Recommend a 92 for spin…smoother action…I’ve also discovered that a regular lever is much easier to spin than the large loop…but nothing looks cooler than a winnie large loop rifle..great spin tutorial…you covered all the points…including the dangerous outcomes…spinning is fun but it takes practice…great vid, sir…subbed👍🏻

[@rhinestoneropers9204]

Thank you Gregory. I've never tried a 92, but I agree that the action on my 94 leaves something to be desired.

[@rhinestoneropers9204]

Thank you Gregory. I've never tried a 92 but I agree that the action on my 94 leaves something to be desired.

[@samp7003]

I recently purchased a replica of this rifle on eBay. It's beautiful. Doesn't fire but sure looks awesome. It has some weight to it.

[@tomollie]

my 94 action aint no where near that smooth

[@rhinestoneropers9204]

HI Tom, mine is not as smooth as I made it look.

[@bpie8390]

That does it, I'm a gettin' me a lever action! This video got me motivated. GOD BLESS YA.

[@rhinestoneropers9204]

Go for it!

[@Berniessen]

Dont get me wrong but i deal with reall 1894s and they are in 30-30 and 32 special and 32-40 and 38-55 i never saw a Winchester model 1894 in 45 colt or a replica (those are the model 1892,s replicas they are in 45 colt)

[@rhinestoneropers9204]

Thanks Ben. All I know is what it says on the barrel. WINCHESTER MODEL 1984 AE CAL 45 COLT MADE IN NEW HAVEN, CONN. U.S.A.

[@Berniessen]

@@rhinestoneropers9204 yeah i found out ure gun is a 1894 clone with a falling out bottom like a real 1894 but these modern made versions are made in diffent calibers........the originals only had rifle rounds not pistol like 45colt

[@20alphabet]

@@Berniessen Can't imagine why they wouldn't have been made in .45 since many preferred their rifles and sidearms to share bullets so they wouldn't have to carry two different calibers. Live and learn, I guess.

[@2bigbufords]

great video but your music is too loud

[@ProfHarp-ck3nl]

Have always had a problem with broken links--are there any STRENGTHENED links? Also, I see a closer angle with that trigger-trip screw--is it going against a "floppy" trigger?

[@rhinestoneropers9204]

Hi Professor, I must confess that when I drill the hole for that screw, I always just eyeball it. I may not have the best angle but it always works. Also, once I get the screw in, it can be bent a little as needed.

[@ProfHarp-ck3nl]

@@rhinestoneropers9204 YOUR angle is GREAT. You can engage it fairly quickly. But STILL---where do you, IF you do, get those strengthened links?

[@vwdiver512]

Very well explained! I've got a Rossi Ranch Hand that I'm going to try doing this with. Thanks for the great video!

[@rhinestoneropers9204]

Glad it was helpful! I would like to know how the Rossi works. Please let me know.

[@vwdiver512]

Sure thing will do!

[@e.w.g.7222]

Thanks for the tutorial!

[@escapewithnate7901]

what is the web site to purchase the loop like John Wayne's?

[@rhinestoneropers9204]

Years ago they were easy to find. Now I don't know where to find them in stock.

[@ScaredSolution4]

How long does something like this take to learn?

[@rhinestoneropers9204]

Spin cocking the rifle is not hard to learn. It depends on how long the barrel is in relation to your arm length. You might tape the end sight on the barrel because you will probably hit your shoulder with it a couple times. After you understand how far you have to reach to clear your shoulder, you are on your way.

[@yomtube-494]

i like how you are sincerely givin nice infos, and calming voice , decent looks and love towards your props. thank you for the vid

[@rhinestoneropers9204]

Glad you like them!

[@pps7642]

Not me here after reading the entire aoharu x machine gun manga...😅

[@anthonysmyth2405]

Can I do this with a airsoft gun ?

[@rhinestoneropers9204]

If you can, I want video.

[@anthonysmyth2405]

OK

[@jhscheppele2448]

You need to make and sell a jig for drilling the screw hole.

[@rhinestoneropers9204]

Great idea.

[@job38four10]

Any rifle that wont shoot live rounds is junk to me, even if was George Washingtons musket or Custers rifle. So why is that rifle more dangerous then and AR 15, AK 47 or 9mm semi pistol...........

[@rhinestoneropers9204]

I don't know that it is, but this one does not operate like one might expect it to.

[@RGL01]

Very well presented. Nice hat!!!

[@rhinestoneropers9204]

Thank you kindly!

[@jolufepi]

Any clue where I can find a big loop for my 1970 winchester 94 or my Legacy in 357 mag.??. Thank you 👍🇺🇾🤝🇨🇦🧉🐎⚖️🗽

[@rhinestoneropers9204]

I have heard that there are specialty shops that make them. I haven't purchased one in years.

[@layneatherton308]

I make all three levers used in the Rifleman series. I also make bothe levers for the Mares leg gun used in Wanted Dead or alive. Contact me if you want some pictures of my guns. I have four El Tigre rifles in progress now.

[@rhinestoneropers9204]

Hi Layne, That's great. I'm not in need of more levers but people ask me where to get them. Do you make them to sell?

[@567musicman]

@layneatherton308, could you please, send me pics of the three "Rifleman" levers that you make? I am interested in purchasing one but need to decide which. Thank you. Have a great day!!

[@terryholloway9930]

I would like to see em thanks

[@dtnetlurker]

I wouldn't do this all that much. It was a trick for the movies and TV. It's actually one of the worst things for your rifle. It can easily ruin the action. The movie studios didn't have to worry because they always had at least one extra ready. Looks cool though.

[@rhinestoneropers9204]

I agree. I did it only because I have a show.

[@rogerwarrington6915]

If im remembering right the rifeman shot 13 rounds at the starting of the show , but the 94 only holds 12 , the tv gun held 13 blanks cause they were shorter ...

[@rhinestoneropers9204]

Hi Roger, That makes sense.

[@geraldbathurst2218]

they added a extra shot to time out with the music.

[@20alphabet]

Your memory is incorrect, it's only twelve shots in the intro. Take a look m.kzbin.info/www/bejne/aWnFZmiPq8R0l9E

[@j.nicolasphillips3167]

I have always disagreed with the number of shots. I hear 13 every time I’ve watched it.

[@Dee_rian]

You hear 13, but it's only 12 you see

[@brianscustomcanvas1911]

What is the hat you are wearing in the video. I like the pinch front with tight roll up. And if 7 1/4 ill buy

[@rhinestoneropers9204]

It's a Quigley with a soft Gus. Made by Tonto Rim.

[@valentindegen]

Why are blanks dangerous trying this awesomeness?

[@rhinestoneropers9204]

I don't have a specific reason, but we have to treat all firearms with respect as if there is an element of danger. But , if you are spin cocking a rifle that has the fanning screw while loaded with blanks, the rifle will fire much sooner than you intend it to.

[@mittcrocket5942]

What hat is that you're wearing?

[@rhinestoneropers9204]

It's the same hat I always wear but I guess the shadow makes it look strange.

[@mittcrocket5942]

@@rhinestoneropers9204 Sorry, I meant what's the make&model? I love that hat!

[@geraldbodnar2718]

Fasinating !!

[@rhinestoneropers9204]

Thanks

[@rebekahgunthrie2153]

Cool beans

[@rhinestoneropers9204]

Thanks.

[@cryptosig283]

On the 1892, I don't think there is a safety built into a lever which is how Chuck Connors was able to modify it so easily. At least I don't see one on mine. Great video.

[@rhinestoneropers9204]

Thanks for the info.

[@KiLLJOY1056]

Hey i was wondering what the little tassles on your saddle ring are for? Ive seen that before and im very curious!

[@rhinestoneropers9204]

They come with that leather string. For me it's just looks.

[@onmyworkbench7000]

Today by adding the trigger-trip screw pin to the lever of the rifle the ATF would call that *_a Machine Gun!!!_* Even though it still requires an action of the trigger for each round that is fired!!!

[@alextepe4309]

I’ve always liked the spin cock move, and I think it’s just as badass now as it was back then in the days of Chuck Connors and the rifleman. Thanks for showing that it is possible for a gun to load and shoot when you do the spin cock thing, but clearly you have to do it the right way because, as others on youtube have said, gravity is your enemy.

[@rhinestoneropers9204]

Yes and with the right ammo.

[@malgremor85]

You have to be tall to do that.

[@rhinestoneropers9204]

Actually, you adjust the length of your rope to fit your height and arm length.

[@w.rustylane5650]

Cannot find a large loop lever for a .45 Colt Winchester model 94 AE. They do not exist. Where did you get the large lever???

[@rhinestoneropers9204]

HI Rusty, I see your problem. I got mine so long ago that I don't remember where. At that time , they were not hard to find. It looks like they are out of stock now.

[@Saintlawrence100]

I used my original lever and cut a piece out…added another larger rounded piece and had it soldered in…it’s how they did it on the rifleman…you’ll notice the modifications on chucks rifle…check out the very early versions of his 92…it cost me around 50 bucks…maybe less than that…it’s really easy to do.

[@DrDoom-uu3cj]

Since Winchester used to make some large loop rifles from the factory, I wonder if you could order a replacement part. It might have to be ordered from Miroku in Japan.

[@devono7230]

At about 2:25 a rifle just vanished of the shelf.

[@rhinestoneropers9204]

Vanished? I bet it's hanging out at your place. Have fun.

[@brittb6770]

Interesting . 🧐

[@rhinestoneropers9204]

Thanks.

[@LaPabst]

Prolly not the best idea you've ever had... My 30-30 is no foolin' and I'm much happier when its always pointing down range and not at my armpit or boots.

[@rhinestoneropers9204]

These rifles are strictly for my show. Still they make me nervous.

[@LaPabst]

@@rhinestoneropers9204 As they should. But even blanks can kill. Not a preacher, Rock on man!!!

[@Ballinalower]

This is an excellent and informative video.

[@rhinestoneropers9204]

Glad you think so!

[@leadhead3966]

Good video. Need to know where to get the proper powder loads

[@rhinestoneropers9204]

Powder Inc. is the place to order.

[@mrkultra1655]

Thanks

[@rhinestoneropers9204]

Your welcome.

[@mikerichards6311]

👍

[@rhinestoneropers9204]

Thanks Mike.

[@kim5him]

music is too loud for me

[@rhinestoneropers9204]

Me too!

[@swampghost72]

Its cool to see and to do..But also keep in mind if you do it enough over time it can also damage your rifle..

[@rhinestoneropers9204]

Yes there is a lot of stress on the main link.

[@swampghost72]

Its no big deal really..Its just fyi for the average shooter that may not realize.

[@wiletheridge88]

Now is there a way to do this to a airsoft gun or bb gun . My dad loves the rifleman but it would be cool to get him a airsoft version of this ! Ideas? Let me know

[@rhinestoneropers9204]

Hi 88, I'm not familiar with airsoft guns. The BB guns that I have dealt with require some force to cock them. The act of pulling the lever also pumps air into a chamber to fire the bb. I think the only way to do it would be to hold the gun with both hands, cock the lever with a downward thrust and the let the gun spin to close it. Then there is the problem of finding a Big Loop Lever for a BB gun. I've never heard of that. If you make it happen please let me know. Good Luck Dan

[@deechonada]

@@rhinestoneropers9204 Most level action bb guns are CO2 powered so don't require a physical pump to charge the rifle. So maybe it could work?

[@Curonianviking]

Why?

[@rhinestoneropers9204]

Just for show.

[@adriangall9025]

Great Video! Still a fan of "the Rifleman" and have a couple of seasons. Hell, I am still a fan of Pistol Pete Maravich,too,LoL!

[@rhinestoneropers9204]

Thanks Adrian.

[@NIGHTSTALKERsixsixsix]

how do you keep the Ammo from falling out as you are spinning it? i have a problem with it doing this. thank you sir. Any information is great.

[@rhinestoneropers9204]

If your first motion is to open the lever all the way, it should grab the shell so it doesn't fall out. Some types of blanks are better than others for this.

[@roygaisser9230]

Maaaann, you are fixing to get me into all kinds of trouble! Just discovered your channel yesterday and already I've gotten out a Vaquero. Looking for an indoor place to spin. And now...Holy Cow! If I get out a Winchester or Henry...it's on!! I can already see the 18" long, 1/2" deep scar in my wife's new hardwood flooring from the front site or the buttplate!! HA! The McCains had a dirt floor and no woman of the house to fuss, scold, & cold-shoulder Lucas and Mark when they broke a table or a lamp. I've never tried this but is seems like a '92 would be better for spin-cocking. Usually a shorter shell/action, and the whole guts of the carbine don't come out with the lever. I don't have a '92...maybe need to rectify that. You're that guy that I didn't need to hang out with when I was young, but DID ANYWAY! Thanks for the video....I THINK!

[@rhinestoneropers9204]

HI Roy, I bet that your friends say the same thing about you. Thanks for saying hello.

[@roygaisser9230]

@@rhinestoneropers9204 Yes, I think we were ALL persona non grata to each other's moms, girlfriends, and then wives! Then the unthinkable happened...we all had to grow up! Thanks for another good video---I'm on'em now.

[@MAGA2024.]

Perfect i can now do it perfectly with my 94 JW thanks

[@rhinestoneropers9204]

Congratulations!!

[@thelocalon17usdaprime72]

Awesome!!!

[@rhinestoneropers9204]

Thanks!!

[@jhscheppele2448]

Call winchester

[@longshot7590]

Awesome video - thanks

[@rhinestoneropers9204]

You are welcome Long Shot.

[@johnsantos1225]

Man lever guns so good

[@rhinestoneropers9204]

I agree.

[@henrysara7716]

Great skills pard.

[@rhinestoneropers9204]

Thanks

[@recordman555]

Too cool!

[@rhinestoneropers9204]

Thanks Jon.

[@charlesharper7292]

Had a toy lever action rifle when I was a kid. It had a similar device on the trigger. A small metal tab, that was folded up when you wanted to fan the gun. Great fun!

[@rhinestoneropers9204]

I remember those.

[@WatchMan1962]

I have several scars.

[@rhinestoneropers9204]

I guess we don't need a tattoo.

[@pull-my-finger-1]

When did rifles and hand guns become toys ??? this is STUPID PERIOD

[@rhinestoneropers9204]

I earn a living doing stupid things so I can't argue.

[@RealBadGaming52]

Popularity treating guns like Toyo’s Amung Adults because VideoGames like Red Dead redemption 2 and Call of Duty becoming more realistic has contributed to Adults getting into Guns and treating them like toys , and Some choose to play with BB/Airsoft or NERF gun due to maybe not wanting real guns or becasue they live outside USA where a guns are banned, also People get into Westerns too and you could blame Terminator 2 for this stuff to, but jeez man let people have some fun aslong as thier not hurting people or doing it in Public…especially in the USA. I’m assuming yur either a chad, Not American or Anti gun…and obviously a Killjoy ALSO JOHN WAYNE SPIN COCKED A GUN...TWICE, SO WAS HE STUPID??????