How to Monitor Motorcycle Tire Pressure | Smart Solar Tire Pressure Monitoring System - Solar TPMS

Solar motorcycle TPMS - Tire pressure monitoring system
Features:
• Solar motorcycle tire pressure monitoring system
• IPX67 waterproof liquid level sensor and monitor, anti-oxidation and durable
• LCD-FSTN display, clearly visible during day and night
• Psi and Bar tire pressure units can be changed arbitrarily
Convenient:
• Built-in 1100 mAh battery
• Dual charging mode, solar charging and magnetic charging
• The magnetic USB charging port is designed to quickly charge the monitor at any time.
• Automatic display switch, energy saving
Safety
• Real-time monitoring of tire pressure and temperature
• 5 abnormal alarms to protect tires and driving safety
① High voltage alarm
② Low pressure alarm
③ High temperature alarm
④ Leakage alarm
⑤ Low battery alarm sensor
Product Description:
• Project type: Smart motorcycle tire pressure monitoring system
• Operating temperature:
-20 ℃ ~-75 ℃ (monitoring)
-30℃～+80℃ (external sensor)
• Pressure accuracy: ± 0.1 bar / ± 1.5 psi
• Temperature accuracy: ±3℃
• Sensor transmission frequency: 433.92 MHz
. Replaceable battery: Yes
• Material: ABS + PC
• Waterproof rating: IPX67 (monitor and sensor)
#tpms
#tiremonitor

[@peter00635]

can you do a short video how to set up for the first time. much appreciated

[@TonaziTube]

Will consider for next project.Meanwhile,you can refer to full video first.

[@paulwolf8543]

I lost my instructions. Anyone have a link?

[@TonaziTube]

Try search on google . Type “motorcycle tpms manual”.

[@paulwolf8543]

@@TonaziTube Did that, no luck finding the brand Acteam (as seen in video) manual. when using google you find all brands but Acteam Solar.

[@rogerdcosta5615]

Hey..need your help with the settings on the screen of this tpms..can you help me please! Can't set the time!

[@TonaziTube]

Thank you for watching.You may try below method: Time setting (factory default is 12.00) In the standby mode, long press the Settings button" for 3 seconds to enter the system settings state, the 0 icon appears in the upper left corner. press the "Settings button" and the hour flashes, after selecting the change time through the "Power button", press the "Settings button" to save set up. In the standby mode, long press the "settings button" for 3 seconds to enter the system setting state, press the power button. the 1 icon appears in the upper left corner. press the "settings button" and the minutes will flash, after selecting the change time through the "power button", press "settings" Press "to save the settings.

[@tack1224]

Yo lo compré y media muy exacto pero se quedó en 31 psi y jamás ha vuelto a cambiar ya subí y bajé y nada

[@TonaziTube]

Intente apagar y encender nuevamente o restablecer la unidad.

[@christianguevarra1]

I just bought but I cant set proper psi settings, my scooter/mptor recommended psi is fw 29 and rw 33 but only max 17-29 for low psi and 40-98 high psi. Is the range adjustable?

[@TonaziTube]

The reading may slightly different from the actual psi.Range should been fit.

[@reynaldolim4215]

Front sensor doesnt show anything once connected. Meaning it doesnt connect with monitor. Changed batt still no response. Any idea how to trouble shoot?

[@TonaziTube]

Did you switch off and on back the monitor after change the battery?

[@reynaldolim4215]

@TonaziTube i did. still nothing happened. Monitor still shows 0

[@TonaziTube]

Normally happens when battery weak.Got problem with your sensor i think.Try Check the battery contact.

[@Fedezap]

se puede quitar el panel solar?

[@TonaziTube]

panel solar no se puede quitar. Panel Solar cannot remove.

[@Chris_Z.]

Can the solar panel be removed?

[@TonaziTube]

Solar panel already fit.Cannot remove

[@Chris_Z.]

@@TonaziTube Thanks

[@TonaziTube]

You’re welcome.Thanks for watching!Dont forget to subscribe to my channel

[@pacomonje]

the TPMS is showing 33 but my tire manometer shows 44, how can I re-calibrate the reading?

[@TonaziTube]

The problem could be a damaged or shorted antenna near the wheel, or a wiring fault between the antenna and the module. If you suspect the TPMS module is not receiving a good signal from one or more sensors, check the antenna wiring for continuity and problems such as shorts, opens or high resistance. Faulty TPMS sensors can indeed be a common cause of the tire pressure light being on. These sensors may not accurately detect tire pressure, leading to false alarms. Over time, sensors can wear out or become damaged due to factors like road debris or corrosion. Different TPMS model need different style of calibration.Need refer to user manual or operation instruction for each TPMS model.

[@cartelilb]

Tendrás que me puedas proporcionar el manual, cambie las baterías después de un año y se desconfiguró y no se cómo configurarlo

[@MrRflowersg]

Acabo de comprar este sensor. Lo dejé cargando toda la noche y no carga. Mala experiencia.

[@TonaziTube]

Lo siento por esa experiencia. ¿Puedes cargar con energía solar o solar? Puede haber problemas con la conexión de carga USB.

[@TonaziTube]

sorry for that experience.Can you charge use solar or sun?May be have problem with usb charge connection.

[@lideresunidosmexico_]

Pudiste hacer que cargue? yo creo que tengo el mismo problema

[@TonaziTube]

ang produktong ito ay may 2 pinagmumulan ng pag-charge. Gumamit ng USB o Solar na mga singil. Kung maaaring singilin sa pamamagitan ng solar o direktang araw, maaaring magkaroon ng problema sa pinagmumulan ng usb input. Kailangang mag-imbestiga sa pamamagitan ng pagbukas ng case.

[@TonaziTube]

This product have 2 source of charging.Use USB or Solar charges.If can charge by solar or direct sun,may be have problem with usb input source.Need to further investigate by open the case.

[@rahuljangra399]

Please share link

[@TonaziTube]

Sorry!KZbin not encourage to share the link.You may try to search at online shop(ex:Shopee) by typing the product name.