How to mount ski bindings at home. Step by step tutorial. Atomic Shift MNC 13 Black Crow Atris 2022

[@sam-ww1wk]

Ahh, another no garage crew working on skis ha ha. I'm doing mine in my kitchen😆. I only mount skis every few years or so, so always come back to youtube for a refresher. Great vid, thanks from Utah.

[@cfmasta]

😂🙌🏼 Good luck and have a great season in the slopes

[@alejandrovela6347]

I snowboard, and setting up snowboards is a hell of a lot easier! But thanks to your video, I just installed Atomic Strive 12 GW Bindings into my wife’s Volkl Blaze.

[@cfmasta]

@@alejandrovela6347 hehe sometimes I wish I was on a snowboard instead 😂🙌🏼

[@Mezmar165]

Fun! My wife from The Netherlands and I enjoyed watching your made in Sweden tutorial from the Shenandoah Valley, Virginia. Nice job--thanks!

[@sirilewenhaupt2047]

Great video guys! Going to mount my Japow skis now!!🎉

[@cfmasta]

Glad you like it!! Hope you get an epic ski winter on your skis ⛷️

[@lonnleaf]

Mounted my Zag Patrols 96 with you guys, jealous for the place where you live and how easy you speak English which is not native being that young.

[@cfmasta]

The Zag’s look really nice!! Hope you have great season on your skis 🤩

[@finnlee9535]

Awesome tutorial, I couldn't get my printer to print the template at the correct scale but using your tips about finding the center line and the dimensions written on the template I was able to mark and drill the right places on the ski :)

[@cfmasta]

Great to hear!! Hope you have a great time in the slopes!!!

[@toddzorn6048]

Just watched your video see if there’s anything unique about Shifts compared to Jesters and Pivots or installs that I’ve done, and aside from the front screw, it’s pretty much the same job. I thought you did a really good job describing the steps and showing them for anyone considering mounting up their bindings. Nice job!

[@cfmasta]

Thx man! Glad it could help you and interesting about the similarities! Good skiing 🙌🏼

[@felixtiger]

Thanks, guys! 🙂👍 Super helpful - just got my Faction Agent + Shift bindings delivered this week, managed to complete the mounting on Saturday (so many good tips in your video , e.g. the tape-piece on the drill!), and got to test my new skis today in Andermatt. Awesome!

[@cfmasta]

Glad to hear and awesome with Andermatt 🤩🤩

[@robertnorberg9294]

Really great video with clear and on the point instructions. Used it when I changed to Shift on my Atris🙏

[@cfmasta]

Glad to hear Robert 👍🏼

[@michaelgiannini3247]

Thanks guys, very informative and made my mounting a hell of a lot easier, especially knowing of the template and how to slide the front portion back after the two screws on the resting plate were placed. Now waiting for more snow in the southern Rockies, Tijeras NM! Good Video!!!

[@cfmasta]

Glad you like it!! And good luck with the skiing!!! We’re hoping for much snow this winter I’m Sweden 🤩👌🏼

[@ireneusjustinpolicarp8628]

Thank you gentlemen! Very comprehensive and informative. Got my Atomic shifts mounted and the technician never informed me if I wanted the information sheet that came with the bindings. Don’t want to go back for it since it’s quite a drive. Next, the tech was nice enough to mount the bindings right away using boots I thought that would fit in perfectly. Cut things short, had to return the boots and order a new pair coming in a few days. Needed some instruction on how to adjust the rear binding for boot length (give or take 2 mm). As for the front, from GripWalk to a non GW. There will surely be a big gap in height. Cheers.

[@steviemt1]

You need to check the forward pressure as well as the din

[@sepehrpoorabedi]

cette vidéo est très utile et simple pour tous qui veulent fixer ce produit à la maison eux-mêmes. merci à vous

[@cfmasta]

😊👍🏼🙌🏼

[@salem_co]

Come on Karl i was waiting for the Din calibration part 😅 anyhow thanks for the demonstration it was really helpful 👍🏼

[@cfmasta]

😂👍🏼 Hope you managed the Din settings 🤓

[@salem_co]

@@cfmasta all sorted 👌🏼

[@hunterlee2489]

Thank you for taking the time and putting this video together! I'm installing Soloman bindings on a pair of Elan skis, this video helped a lot!

[@cfmasta]

Great to hear!! Glad you like it! The Salomon skies AND bindings (seen in the background in this video) are being tested in Åre in Sweden this week 🤩

[@SomeOne-gj8cl]

Great video man!

[@cfmasta]

Glad you like it!! 👍🏼

[@christophlamipie]

thank you so much. Just waiting got my binding to arrive and now I know how to fit them;-)

[@cfmasta]

Great and glad you like it!! Good luck with mounting the bindings. We tried the Salomon’ skis the other day. Both walking up and skiing down and bindings worked great 🤩

[@Trylle0_o]

Nice! that was very thorough! i like how it can be done in a good way with very basic tools, and minimal preparations. for us extra clumsy people there is a cheap “drill depth limiter” that an be attached to the bit, or like 15€ for pro bit.

[@cfmasta]

Glad you like it!! :)

[@lorenzofornari]

very useful. what shall I consider to install them if I want to use both 24/24.5 and 25/25.5 boots? basically my boots are 24.5 but I want an installation which let me use also longer boots (in case I sell them, because most people use longer boots)

[@Clickstartband]

Fire setup my guy! I have the Armada Shift on my Atris as well!

[@cfmasta]

Yeezzz!!

[@stalmachsport]

Where did you download this template? Btw nice job 🤙🎿

[@cfmasta]

There is a link in the description to the template. It should still work 👍🏻

[@chrisfoley.design]

Moreeeeee great vid You gunna be posting some rides soon?!

[@cfmasta]

No rides planned right now but hopefully soon 🤩. That’s one hike from last year in Riksgränsen in northern Sweden. It’s in the middle of may. On my Instagram. (Hopefully the link works) instagram.com/reel/Cdl_JM_lwPq/?igshid=YmMyMTA2M2Y=

[@alexjanaqi]

This was fun to watch. I am getting the 2023 Atris which is at 105mm underfoot. Most bindings' brake width are at 100mm or 115mm. Which one would you pick for these skis?

[@cfmasta]

The break should be wider than the ski so would pick the 115mm 👍🏼. Good luck with the new skies 🤩👌🏼

[@alexjanaqi]

@@cfmasta thank you!

[@bjornlarsson7624]

Mkt bra - tack!

[@mogglie]

Tack så mycket. Köpte just ett par sånna. De kom monterade på skidan. Men alltid bra att förstå hur allt fungerar. Jag tycker att ena bromsen glappar lite. Men det verkar inte finnas något sätt att sätta fast den. Har du någon erfarenhet av att bromsen inte riktigt sitter.

[@cfmasta]

Hej, vet inte om jag fattar riktigt vad det är som glappar. Vi monterade bindningar på två par skidor och inte upplevt något problem. Jag har iofs inte kollat supernoga på "bromspinnarna" som går ner i snön. Möjligt att dem rör sig lite :) Även gått uppför med skidorna och då har det funkat bra med att fälla "upp" bromspinnarna så de inte är i vägen. Hoppas det löser sig!!

[@drdawg3]

Really good job with very simple tools, I did one of these bindings a year ago and it wasn't easy, or at least it was not easy because i didn't have a template, but you guys made it very visual, and explanation was on point. Could you share the website you got the templates from? thanks and good skiing

[@cfmasta]

Glad you like it and glad we can help :) The link is in the description and I can put it here as well. It's a google drive with a lot of templates so you will have to look for your binding / the right template. It's quite easy to fint. Good luck!!! - drive.google.com/drive/u/0/folders/1lpDx4-8PF44Pc08HHNyYY6Gg2a3Dd245

[@lucasredondootero8537]

Really nice tutorial, congrats!! I have a doubt, Using the template with the sole length, when you mount the binding, is the heel adjust in the middle of the seting for that boot length? I mean the binding has 3cm, after mounting it for a certen boot you can then only fit boots between +1.5cm and -1.5cm sole length, right? Thank you!!

[@eliashaeger606]

Hi, it does not actually say on the template but we had no problem getting the boot to fit. The template is precise enough to get the mounting positions almost spot on!

[@C-zt6ps]

Amazing tutorial! Wondering what brake width you purchased? I'm planning on putting shifts on my 121wide skis and heard that the brake width is wider than advertised. Do you happen to know what brake width was put on the atris and how much clearance is still available?

[@eliashaeger606]

Hi and sorry for the late response. If i remember correctly I put 120 brakes on the skis. There were not any 110 brakes to purchase and that’s why we put the 120s. The brakes are generally much wider than advertised so 120s should be fine for your skis!

[@psmith5552]

If you're going to spend a lot of money on shift bindings and black crowes skis it's worth the extra 40-50 bucks having a professional shop mount your stuff who have an actual jig for this kind of thing.

[@cfmasta]

If you don’t feel secure doing it yourself, don’t have the time or tool I would go for a store! That’s a safe and practical option I would say. 👍🏼😊 Good luck!!

[@justingt3rs]

great video! Question: is 1cm forward a happy result? i need to redrill the used kit i just bought as i have big feet. the skis are 108mm wide (i bought the kit for the good deal and these bindings) and not enough powder for this width

[@cfmasta]

I’m happy with the result. I think they preforms really well. A have not tested any other positions on this ski so can’t compare 😌 but I like them like them in this position 👍🏼

[@lucmennen378]

Thank you for the great video. Very clearly . I cant find the measurements/scale paper online. Can somebody send al link please. Thanks greetings from the netherlands

[@cfmasta]

Hi, glad you like it!! The link is in the description. Also pasting here drive.google.com/drive/mobile/folders/1lpDx4-8PF44Pc08HHNyYY6Gg2a3Dd245

[@whoisthe1412]

Awesome

[@eliazemp9491]

Wich width should I buy for my bent chetler 120?

[@cfmasta]

If I remember correctly we put the 120 on our skies. They should be ok for your 120 skies but if I were you I would double check the width of the breaks before purchase since I can’t tell you for sure. Good luck!!

[@Daniel-ge6df]

I have a Ski with is 100 wide in middle but accdidently bought this binding with the 110 stoper. Can is still use it or what are the disadvantages of a wider stoper?

[@eliashaeger606]

Hi! This is not a problem. Just some stickout on each side. I have 120 bindings on my 106 skis without any issues!

[@Daniel-ge6df]

@@eliashaeger606 thanks for the reply! So it doesn’t make a different while skiing I even when you ski and your legs are very closed together?

[@cfmasta]

@@Daniel-ge6df we mounted the same binding on the Atris ski in the video and we thought about it before the purchase and it was no problem at all. When you step down the heel they fold in over the ski. Not all the way but close. I didn’t think about it at all last winter when skiing. 👍🏼

[@Daniel-ge6df]

@@cfmasta But your Atris is 108 in the middle not 100 as my bent chetler

[@eliashaeger606]

@@Daniel-ge6df I have not had any issues with this at all. Even seems like the 120 was a better fit than the 110 would have been for my skis!

[@brianmccormack84]

Where did you get the paper template from I cannot seem to find one

[@cfmasta]

Hi. There is a link to the documents in the description of the video. 😊

[@ayaayaka2544]

Thank you so much! Great step-by-step explanation :-). I saw that you have the template for Salomon Warden 11 on the google drive you shared in comment, do you have by any chance the template for the Warden MNC 13?

[@cfmasta]

Hi, it’s not my google drive so not sure. We did a google search ourselves before mounting the bindings and found this drive. So just added the link and hope you can find what your looking for!!

[@lucaslvu]

Do you know if the 10s and 13s are the same. I cannot find the 10s template anywhere

[@cfmasta]

Hi sorry but not sure about that. Think it is the same from YT videos. Maybe you can print the template and see if it matches with the bindings. Good luck and sorry about the answer 🙄

[@bostonwalbeck5104]

I also have the 10s did you end up using the 13 template?

[@vgndt8153]

How do you get the scale correct when printing ?

[@cfmasta]

You can verify the scale using a real ruler against the one printed on the template. Good luck!

[@lswen2880]

Find the center line is painful. Anyone knowing woodwork can recommend a tool?

[@Mezmar165]

Tape measure in mm is the only tool you need. Measure across ski waist. Say your ski waist is 96--half of 96 is 48. Check measurement from both edges to confirm, mark your center line.

[@solog116]

How are you liking the Atris?

[@cfmasta]

Let me get back to you on that one. I have actually not have time to test them yet. Next week skiing is on the agenda. I don't have any skins at the moment so no walking but a lot of down hill 🤩🙌🏼 The Salomin QST´s (we mounted same bindings on them before the Atris, but we didn't film) are in Åre in Sweden for a couple of weeks and all I heard is good vibes!!

[@solog116]

@@cfmasta I went with Fischer Ranger 102FR with Marker Duke PT as I will be using them mostly in the resort and hopefully for some short tours. Your exact setup was 2nd on my list. Where are you guys located? I am in Western Canada. Next time I think I will mount myself you really did a good preparation before you started. Good luck on them and thanks for the video.

[@cfmasta]

@solog we’re in Sweden in Stockholm so we have to drive 6-8 hours to get to ok snow and mountains 😊. Good luck with your skiing!!

[@cfmasta]

Tried the Atris for a few days now and I really like them. Did not try in powder or deep snow. Don’t have ent skins so have not tried walking uphill with them. Atris in action - instagram.com/reel/CZsMkn0lfEA/?

[@alexwipe]

Fuck, who knew it was so complicated. I am not going to fuck up my new expensive skis, SKI SHOP for me!!

[@cfmasta]

😂🙌🏼

[@mmc12345678]

🤙

[@action.ridertrip]

Never do that. no need to spoil expensive skis, do it in the ski service using a stencil