How To: NVG Helmet and Rifle Setups

Рет қаралды 14,527

Күн бұрын

Пікірлер: 47

@JedWunderli 7 күн бұрын

Great video. I watched the entire video. One of these days I'll invest in a PV14 or some other NVG. I'll also get training.

@ArmadilloArmament 2 ай бұрын

Excellent video. Its difficult to explain to people getting into nods what to look for and considerations without going into a 2 hour rant. This is a really good jumping off point to send to people.

@LuisBruno 2 ай бұрын

yep, same as the radio comms options video, also very useful

@shannondamron1456 28 күн бұрын

Newbie to nvgs. I'm on my departments swat team as well. I have done research on my pvs14 and I'm trying to get my feet wet with the tube. I gotta say yall have completely covered all my questions more than any other source I have looked up. Thank you OTG

@oriontraininggroupllc2782 26 күн бұрын

Glad to hear it!

@Rooobviously 2 ай бұрын

Just a couple of notes about the dbal d2, only the FDE is discontinued the black is still available. The dbal d2 illuminator is LED based, so the beam cannot be narrowed down as tightly as the laser based illuminators, but the trade off is the illuminator power isn’t restricted.

@Roger1379 2 ай бұрын

"Always be prepared to use someone else's rifle or NVG set up" - Miyamoto Musashi 1645

@AbnerGarcia-l8k 2 ай бұрын

🎉

@GraizenBrann 2 ай бұрын

The True Lies reference had me rollin 😂😂😂💀💀💀

@justjames7809 2 ай бұрын

These episodes are like going to the movies for gun guys.

@TheDesertNomadOfficial 26 күн бұрын

Im a big fan of mod button switches. Of all the switches I’ve used I like them the best because you actually have to press them a little harder then you think in order to activate them. Makes it extremely hard to ND your WL or Laser. Not impossible, but I’ve never had a wight light ND since I’ve been using them. There’s another company called HRF Concepts that makes different housings for the mod buttons, you can actually make it so it pitches the button at a 45 or 30 degree angle among other options. Makes for some really sweet setups and allows you to easily differentiate between your white light and laser all while running 2 switches.

@charlieghague Ай бұрын

One thing I like about the hydra mount that no one really touches on is eliminating MOA shift. With the optic mounted on the receiver, you're less likely to have the zero shifted if it's dropped. So you can run a lighter rail without fear of losing your zero if it's gets bent a bit.

@oriontraininggroupllc2782 Ай бұрын

Counterpoint would be that they made that mount out of a soft aluminum choice, and individual testing has shown that if you drop it the mount bends worse than any rail.

@edward_the_bruce Ай бұрын

@@oriontraininggroupllc2782And splash a ton of IR light on your weapon, making you stand out even more to others using nods.

@dingnle 2 ай бұрын

Nice. cool show and tell

@Jerkasaur 2 ай бұрын

i have the opposite issue. modlite/surefire switches being extremely unreliable and finicky for activating white light. tail cap works every time no exceptions

@Davethegunguy 2 ай бұрын

Tailcaps ftw!

@forcesolutions4154 2 ай бұрын

And no power drain when using tailcap

@forcesolutions4154 2 ай бұрын

Good stuff. The TNVC V-Shott series on YT is also highly useful for NV curious/newbie people.

@oriontraininggroupllc2782 2 ай бұрын

Good to know thx

@ValorArc_Designs 2 ай бұрын

Late to the party,, what are your thoughts on vis-only lasers for LEO who don’t use NVGs. Marking, communicating and teaching?

@DAMBIGlsu 2 ай бұрын

I would imagine you would use vis more often than IR in LEO. I'm probably wrong but the possibilities are there.

@oriontraininggroupllc2782 2 ай бұрын

Yeah it’s almost must IMO, especially for gas heavy teams.

@chuckles6102 2 ай бұрын

@@DAMBIGlsuyour 100% correct, a bright vis laser is used constantly day and night.

@charlesl5226 Ай бұрын

Gunnies everywhere seeing you hold your helmet by the strap, “WhAt Is ThAt An EaStEr EgG bAsKeT?!”

@bluegrass4840 Ай бұрын

😂

@mariolopez-oi2td 2 ай бұрын

Why is looking through your night vision through the gun optic called passive aiming/shooting?

@oriontraininggroupllc2782 2 ай бұрын

You’re “passively” aiming by looking thru the optic (no one else can see your dot) vs actively putting out a laser into the environment to aim and everyone can see your laser. Thats how it’s been explained to me, and I’m not sure of a better explanation for that specific terminology. At least I haven’t found one.

@mariolopez-oi2td 2 ай бұрын

@@oriontraininggroupllc2782 That makes a lot of sense thanks! Great video I watch a lot of them even though I don't own a gun 😆

@revolutionanarchy713 Ай бұрын

I watched until the end. Two things, one, when is the test, and two, do i get a cookie for watching to the end? Also, great video gentlemen.

@AyandaKula 2 ай бұрын

What I would like to find out is (I apologise that it's off topic) if there is an optimal barrel length in relation to your overall height? Jared, I'm guessing you're 5'11"? So a 10.5" is optimal for you to manipulate your rifles accessories like your laser and weapon light. What is optimal for a person that's 5'6"? or 6'2"?

@oriontraininggroupllc2782 2 ай бұрын

I am 6’ 1”. Barrel length is totally unrelated to a person’s height.

@AyandaKula 2 ай бұрын

@oriontraininggroupllc2782 Thank you for the reply brother. I hope I didn't offend you with guessing your height incorrectly, taller people are usually not as big as you. Solid video as always. There's always a lot to learn.

@oriontraininggroupllc2782 2 ай бұрын

@@AyandaKulaoh no not at all. Just wanted to answer the question lol

@AyandaKula 2 ай бұрын

@oriontraininggroupllc2782 Thank you brother. Much appreciated.

@dnorris1313 2 ай бұрын

What was the ear pro setup you were using at around 52 minute mark

@oriontraininggroupllc2782 2 ай бұрын

The peltor comtac 3’s are what I was discussing breaking the seal when shooting

@Annoyingdog37 2 ай бұрын

Nut vision

@Salvo_Your_Problems 2 ай бұрын

1:08:38 dude really looks like a GAFS user

@Texan_American 20 күн бұрын

I disagree, you need a NV setting. I had that Lead and Steel optic and had to get rid of it because the lowest setting would halo out my PVS14. You could see it in daylight even at the lowest brightness which was insane. Passive aiming was literally impossible. So NV settings are highly recommended IMO.

@cleavernamehere 2 ай бұрын

What are some examples of non full power illumination that is worth it? Please don't say Somogear....

@christoperdevore3617 2 ай бұрын

Steiner Dbal D2

@oriontraininggroupllc2782 2 ай бұрын

Steiner has some products, BE Meyers makes a non FP mawl but in my opinion it’s over priced. There’s also non fill power PEQ boxes out there. A bit of googling will yield plenty of options

@PaulLopez-g2f 2 ай бұрын

Great content, as always! I need some advice: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How can I transfer them to Binance?