How to Oil Change 2014 Mitsubishi. DIY

No.175 Today we're doing an engine oil change for 2014 Mitsubishi.
If you find my video helpful, don't forget to leave a Thumbs Up, Comment & Subscribe. Also hit the Notification bell, so you always get my latest video.
If you really like my video, consider "Buying Me Coffee" by pressing the "Thanks" button below the video. have a great day!
Note: Recycle your old oil & bring back to Auto Zone for disposal.

[@polkametaljazzfusion5397]

Exactly what I was looking for, thank you so much! About to do my first oil change :)

[@jonahvlogsdiy4143]

No problem. Good luck! And thanks for the visit.

[@matta.5363]

Well done video on the oil change. You explained it clearly and accurately. Useful comments on the oil filter installation. Thanks.

[@jonahvlogsdiy4143]

Glad it was helpful! Thanks Matt.

[@user-qw8ov7ld1u]

Thank you so much, you have saved me a couple of dollars.

[@jonahvlogsdiy4143]

You are welcome! Thanks for watching.

[@chas1600]

Well done, very helpful. Thanks!😃

[@jonahvlogsdiy4143]

You're welcome! Glad my video helped.

[@albertmcfry6322]

Great video, helped a ton thanks

[@jonahvlogsdiy4143]

Glad to hear it! Thanks for watching

[@AlanJones-bw8gn]

Thanks mate,very good video

[@jonahvlogsdiy4143]

Thank you Alan & thanks for the visit.

[@smoothsimulator6968]

great video. Jiffy Lube just lost a customer of 22 years. i'll be doing my own oil changes from here on out!

[@jonahvlogsdiy4143]

Thank you and thanks for the visit. Yes I bet you'll do a better job than them.

[@You12322]

Thanks for upload 👍

[@jonahvlogsdiy4143]

No worries. Thanks for the visit.

[@jediroque5202]

Thank u sir very helpful

[@jonahvlogsdiy4143]

Most welcome

[@thesource8741]

Great guide thanks, just picked 2014 RVR and soon will be doing oil change If I could make a couple recommendations, remove oil dipstick completely before draining oil along with fill cap as will drain quicker. Also when getting new filter ready due to position filter sits in motor I always fill the filter with new oil using center hole in filter. May take a couple fills to allow oil to settle in but auto shop teacher told us all oil in pan has to go through filter before going to critical parts on engine. Saves that one-two seconds of waiting for oil to pump to critical areas.

[@jonahvlogsdiy4143]

Good advice but with my butter finger hands, the filter has slipped from my hands before & if filled with oil...what a mess .

[@jamualma]

Thank you

[@jonahvlogsdiy4143]

You're welcome. Thanks for watching.

[@rmcm530]

Thank you 😊

[@jonahvlogsdiy4143]

No problem

[@TheJunTV]

husay. salamat po

[@jonahvlogsdiy4143]

Glad I could help Jun.

[@alexvazv4865]

Great Video! The only thing I would add is that you probably don't need the tool for the filter. if you have a decent grip you can take it out by hand no issues

[@jonahvlogsdiy4143]

Great point! But not all have strong hands like you.

[@SA-mu8hk]

Thanks

[@jonahvlogsdiy4143]

No problem. Thanks for the visit.

[@jediroque5202]

Sir where did u get the black car lift ?

[@jonahvlogsdiy4143]

That specific ones were bought at Auto Zone. But I also bought similar ones at Princess Auto.

[@danielb6918]

Why the oil 0W-20 instead of 5W-30?

[@jonahvlogsdiy4143]

Good question. We asked auto zone to look at their book to see the oil for the car. That's what they said was recommended. Usually it would say on the oil cap, but this car doesn't show it. If your oil cap says 5W-30 then you should use it.

[@MaximumDIYGarage]

Nice video! One thing I would suggest is to replace the crush washer on the drain plug. Yours looked like it was mangled and may cause a leak in the future. Here’s my experience: kzbin.info/www/bejne/rGTIpoSQjM-UY8U

[@jonahvlogsdiy4143]

Good idea for the next time.

[@jayhendricks7487]

The 2014 isn't a push start? Wonder why, my 2013 is push start

[@jonahvlogsdiy4143]

Good question Jay. Maybe it was a special edition .

[@supacoopent1461]

Shidd I got a 2014 an it's a push to start