How To Open RAM TRUCK HEADLIGHTS

[@briansbrain3624]

Just did a set of Oem. The most under talked about tip in this video was the spreading snap ring pliers! First set I’ve ever done in the oven and took 5 min to get them free. Nice video

[@brentmolesworth3524]

What’s in that solution that you dropped the “chrome” parts in?

[@imtherealshady18]

Did you remove bulbs and projector housing? Or did you just leave the cover on it and bake it with all that inside?

[@amott5812]

seriiously... just skipped over that part. i get removing the bulbs but the wiring and housing im unsure of.

[@realmayo9984]

Hell yes! Didn't expect the collab with @Boostedmotorsports !!!

[@joshruss2081]

What do I use to strip the chrome ?

[@johnkurtz1383]

What temperature is the oven at ?

[@tidusdiablo1234567]

I made my first set of custom headlight a few weeks ago, and they were from my 2011 ram 1500. It was a pain to open them. But doable

[@flyryde]

What’d you do to them?

[@robzillagarage]

Welp watching your older videos answered my question!! Thanks

[@troublefinderslukespersonalacc]

What temp is the oven at

[@andregerrits]

when will u do a full tutorial 0-100% custom headlights?

[@NajarOffroad]

John stick to building Hellcat Swapped cars 😂

[@flyryde]

His poor fingers 😭

[@BoostedMotorsports]

Hahah

[@brianlow7235]

What's the degreaser called?

[@flyryde]

ZEP

[@brianlow7235]

@@flyryde thanks brother!

[@qbicksmusichub3431]

👍

[@ChapmanAutomotive]

Do you know the supplier that makes the parts for ebay aftermarket lights. I need a few pieces without buying another 300 dollar set?

[@robertovalencia1753]

Could it be any degreaser?

[@brandoncroxall5672]

Did you ever get an answer?

[@GladlyOnXbox]

i have a 2002 ram 1500 with the old style bucket headlights, can i still do this to open them?

[@moetpoet5721]

Ugh, wish me luck I ordered the TRS rubber sealant for my ram and I’m afraid I have opened a set of headlights before but I burned my first set so I’m scared cause of those memories but I’m gonna try to be patient. Worse fear is condensation will still be there but I hope it does fix it

[@TheMusicFresh]

damn when you can do it mine? great content! cheer mates

[@davidoffonlyone]

Hey. I'm just wondering when you paint inside or outside lights do you use any heat-resistant paint or it's just standard paint? Xenon or HID's can be quite hot.

[@BoostedMotorsports]

Never again! 😅

[@flyryde]

Hahahahahahaha

[@elchequito9545]

they just dip in zep degreaser and that's it?

[@jerryhansen3435]

Almost everything I've done are permasealed ram truck headlights, alpharex permaseal makes those factory projectors look like child's play 😂😂

[@alexlogvinenko3108]

Good job!!!

[@leofelix5015]

Woooow finally my truck... Hi love you iit looks AWSOME but yes big BUT?? WHY DIDNT YOU MAKE ITURN SIGNAL SEQUENSIAL? THANKS AGAIN

[@flyryde]

Well now that it has Butyl instead of Permaseal we can open them easily again 😉

[@JDMLEDSOLUTIONS]

Easy glueeeee... 😍😍😍

[@flyryde]

Im such a wuss. I hate anything that takes more than a couple minutes to open after heating lol.

[@JDMLEDSOLUTIONS]

@@flyryde every day I must open these... just a few headlights come w/ butil here... argggg...

[@ZamDGarage]

Glue machine whats its name 17:46

[@Duramaxjon]

Now try this on the 15-19 Sierra and Silverado headlights, I don’t think it’s anywhere near as easy as the rams

[@jonathansandiford4137]

Woot. I just did this to a vw tiguan

[@flyryde]

Nice! What’s you do to them?

[@jonathansandiford4137]

@@flyryde adding some sequential led functionality 😁

[@TheMalibuman79]

That's the same as my truck... guess who's armed with just enough knowledge and brain damage to try this themself?! GUESS WHO FINNA BUY AT LEAST ONE NEW HOUSING?!?!

[@flyryde]

Dope! If I can give any advice it’s to make sure you heat at 220°F for 20 minutes, then make sure as it cools, you heat it back up and instead of struggling to make progress once it’s cooled off.

[@RO-qi9yj]

Should’ve removed the amber reflectors and added the clear ones much cleaner look, also d.d switchback drl boards

[@flyryde]

Naw, it wasn’t about mods, just swapping lenses. The beauty is, we can EASILY open them back up now that they’re sealed with butyl.

[@soulmate3727]

I really like your videos, bro and now I'm more inspired to open my headlights! I'm just wondering about one thing .. So I wouldn't have a problem if the headlights were glued with permaseal and I glued them with butyl, right?

[@M1IRONMIKE]

I think I'll just buy new headlights

[@Dezmond_Roman]

😂 right

[@fablighting7884]

So does this mean you're gonna be doing more truck stuff🤔🤔🤔😅😅😅😅😅

[@flyryde]

It means the opposite lol

[@JonathasJunior]

Nissan micra 2014 same mdf glue .. i hate this glue !!!

[@juanquiles3154]

I'm hating permaseal😪 doing a set of vland headlights and they don't want to come apart

[@jackgjushi3420]

Bro this scared me watching it im fucked

[@triple_threat_lightz]

😂 n ppl wonder why other builders n myself ask so much for the Mopar builds 😜, I have like 3 sets of them trucks lights here and 4 sets of the chargers ready to be built😉