HOW TO OPEN THE RAZER VIPER MOUSE - Teardown

[@benl8762]

Really like your style, no commercial no useless words, just full length of informative video, keep up the good work, you will become a said KZbin legend.

[@Beardedbob]

Thanks Ben glad you liked it 👍

[@sdj33]

i think i found rocket jump ninjas dad LOL

[@Beardedbob]

Haha, if I am older then RJN (no idea on his age but 20 years of quake says we aren’t to far apart) then it’s a possibility, just imaging my experience with mice.

[@creakffm]

beardedbob is the best Person on thie planet guys :) modding master

[@monclrs]

@@Beardedbob hes like 30 yrs idk

[@lewishawksey4958]

Great vid bob as always

[@Beardedbob]

Thanks glad you liked it

[@smu7373]

Great BeardedBob! Seems very well built mouse. Razer even didnt forget button tensioning springs. But I don't know why they made the main buttons seperate from each other.

[@Beardedbob]

Yeah you can certainly tell it's been thought out.

[@PCSheepy]

Love these tear downs. Shows how easy you could mode your mice with things like para cord cables etc. Simple mods that will make a huge difference. It would be really cool if you could swap switches out too as you said. Keep um coming Bob👍🏽

[@Beardedbob]

Yeah, I agree. If Razer do release custom switches that would be a game changer

[@PCSheepy]

Beardedbob you should sell them the idea 👍🏽

[@Beardedbob]

😎good idea. I'm just on the phone now on hold. Apparently, my call is important to them....😜 I expect they might have this as a future plan as its unusually to now solder them.

[@vat1c]

Thanks! Ive been wanting to get into my mouse for a bit but ive been hesitant. Do you see any major weight savers that still give me use of my left side buttons? Appreciated

[@Beardedbob]

No obvious weight savers here. You could remove the rear plate, dome, profile button and that would save around 7g to 10g. Another 6g if you remove the side buttons at a guess.

[@enki6039]

@Beardedbob those left and right pads in corpus is rubber(on glue) or plastic (one pice with corpus) ?? 7:47

[@leepicfortnitefunniesxdfun4655]

Do the mouse feet feel the same after you removed them?

[@plaqued9526]

4:18 the two screws you took out before taking off the backplate dont seem necessary. Would you have to put them back if you wanted to put the backplate back on?

[@Beardedbob]

No, if its a little lose you can also double sided tape it down

[@arondejong6979]

Do you know how much the sticker on the bottom weighs?

[@Beardedbob]

I knew I had forgot to show something.... it’s 0.001g

[@blightgmd]

is the viper 8khz the same as this but just with different parts on the internals?

[@jjolatunji5447]

weight reduction video for this and the ultimate?

[@Beardedbob]

On its way after the S2

[@Axtuax]

thanks, i brok the left clicker in my viper ultimate, i need this to try and repair it since it seems as there is no way of getting a new clicker.

[@Dryblack1]

Is it possible to buy replacement switches and a mouse wheel for when they stop working as well?

[@Beardedbob]

I’ve not seen them available for the viper but you can for other mice

[@Ravensh1ne]

Hotswap switches? I presume Viper Ultimate has this feature too, thanks god I can replace it so easily. But sadly side switches is not so easy to replace, guess I'll have to buy usual Viper's platform with side switches

[@equili2893]

So my mouse wheel is "stuck" or has been dislodged how do I put it back without having to remove the mouse feet as I do not have spares :( thanks

[@yatzi8370]

Two razer mice I've had in the past have had clicking issues not because the switches themselves malfunctioned, but because of the poor quality of the plastic "plungers" / "actuators" connected to the underside of the mouse shell. The plastic deteriorates and forms an indentation where the switch bump contacts it and therefore causes the clicks to become weak or bottom out. I would like to know if these new razer mice or any other particular brand or model have improved the quality in this area. It really doesn't matter that the switches are rated for 70 million clicks when the plastic pieces actuating them are only capable of maybe 10 million.

[@Beardedbob]

I can't say I've heard of plunger wear but you can pad then out with tape to keep the click tight.

[@dodaal8069]

mr bob i have a very important question i lost one of the springs what do i do is it gonna affect on the mouse? and if so how can i replace it

[@lorandcristianiuhasz7889]

thanks. i just removed those annoying springs as I could feel them while cliking the mouse and now its much better

[@Beardedbob]

Glad it help 👍 happy clicking

[@Ian-oh1nq]

did you just heated the sensor?!? wont that damage the sensor

[@es5568]

Hey, I've got question to you What is name of the pin/cable inside this mouse? Cause my cable might be broken (sometimes mouse disconnect from pc) and I would like to replace that cable

[@heroxdee6187]

So, is it possible to just use the optical switches from razer, for example for a gpro wireless? If so, that would be an amazing advantage :o

[@Beardedbob]

No they aren’t compatible ☹️

[@sergiocobos8364]

do u think i can use this switches to replace my g pro wireless switches?

[@Beardedbob]

No they don’t swap like that.

[@B4sDr0id]

Good vid would like your opinion on some of the individual parts during disassembly .

[@Beardedbob]

Hi, All the parts? or just some select ones?

[@B4sDr0id]

@@Beardedbob just the parts you find interesting to comment about.

[@Beardedbob]

The main one is how you can swap the switches. This would be great if Razer does release some options for these. How the scroll wheel is help is different and works like a clamp keeping it secure. What is good is how they keep the side buttons in a solid block, this ensures they are very secure, but for me a little stiff.

[@rampage5592]

Hey bob, I have a question regarding my G Pro Wireless. I just got it today, and when I put my finger on the sensor my cursor goes crazy. I am going to return it and get a new one, but I wanted to ask if that is normal. I also got Corepads for it.

[@Beardedbob]

If I cover mine then the cursor bounces around a bit yes.

[@rampage5592]

Ok, I’m going to get a new one, because mine had some wear I believe.

[@rampage5592]

I appreciate the help and I love your videos.

[@Beardedbob]

Np Rampage glad I could help 👍

[@Beardedbob]

What are you going to get?

[@ArthurKingOne]

My viper does scrachy noise if i touch it. Its from the plate where the led shine trough

[@Beardedbob]

Depends. The normal viper wired has a changeable PTFE skate but the Viper Mini doesn't which is what people sand due to the scratching. Do you use a hard pad? also how old are the current skatez?

[@ArthurKingOne]

@@Beardedbob its in the case. Not the mauspad. Two parts from the case scratching eatchother and that sounds bad and cheap. Had a issue like that with deathadder elite to

[@resisthor]

Hello, my scroll click on the Razer Viper might be broken because it keeps clicking itself. What switches can I use to replace them? Can I use the left and right click type of switches (the rectangle model, or regular model?) or I have to use the scroll click button (the square model, micro switch?)?. And thanks for the video!

[@Beardedbob]

you will need a black micro switch which is the right height to replace it.

[@resisthor]

@@Beardedbob okay, thanks for your answer!

[@MEZHGANO]

Thanks for a video. Does anybody know what mouse wheel encoder is used in this mouse? Mine is broken after a year, looking for a good replace...

[@joi4229]

what the scroll encoder does have this mouse?

[@reqru1t]

is Viper same inside as 8k?

[@sennahoj6741]

If you take apart the mouse, do you need new skates or can you use the old ones and if you can use the old ones then how do you put them back?

[@Beardedbob]

depends, but here a video I did on removing skates kzbin.info/www/bejne/e6uXnZtjrapqkLs

[@Jakubexe]

Hello, can i please ask you what can i do when i broke my side buttons? :/

[@Beardedbob]

RMA it.

[@VfRuckus]

So only the left and right are the optic switches, the side buttons are just regular switches?

[@Beardedbob]

correct

[@VfRuckus]

@@Beardedbob bummer. I got this thinking maybe it was optical because I've had double clicking issues on mouse 5 side button on both the G900 and G Pro and their replacements.

[@bruhmoment6302]

Hey can you help me with my problem? I cleaned my mouse because I had problems with mouse wheel. After I put the case back on my mouse the wheel button doesn't work. It's like pushed in or something. Also when scrolling the mouse wheel feels super heavy. pls help.

[@sergeydn4718]

If you were able to figure out the mouse wheel, please tell me what helped.

[@Monody512]

Of course they hide the screws under the skates. The wheel click button on mine has started fluttering(, probably dented. Had this happen with a previous mouse, so I recognize the behavior.) and I know that if I try to fix it myself I'll just screw it up even more. If they used proper materials there's no reason these things couldn't last ten years instead of three.p, but of course they want to sell more of them.

[@pappi3]

Do Razer use Optical encoder for their scroll wheel?

[@Beardedbob]

No

[@test321456abc]

how on earth do you put the mouse clicks back down I pulled them up now they wont go back down?

[@Beardedbob]

You will need to take it apart. then push them down or remove them and hook them in at the front before the rear.

[@a_GTR]

@beardedbob any chance for a viper mini tear down?

[@Beardedbob]

Its coming i'm just finishing off the review.

[@FrajerViper]

Thank you, u helped me revive my 3 year old Viper mouse.

[@Sly_404]

Great video, what tool are you using to remove the feet?

[@Beardedbob]

Nilon tool. It's linked in the description in my Amazon shop. 👍 If you can't find it let me know

[@Sly_404]

@@Beardedbob Got it - thank you for the quick response!

[@aft3rgl0w]

@Beardedbob thanks for the guide, i followed your steps and managed tear apart my Viper. I have a scrolling problem, no matter how fast or slow i scroll the mouse will just also move once or twice to the opposite direction. so 1 line scroll to down and it will just scroll up and then go down. then it will go on and repeat this again. What do we have to clean in order to fix this? i tried taking out the wheel but really no dust or something there. i also blue compressed air on the small wheel as well as sprayed some contact cleaner i got, but i the whole cleaning only helped like 10%. Do you have anything to suggest? I hear lots of complaints for this especially on Razer mouse and while i like them i think i will never get another one. and its only been a year i own this. :(

[@Beardedbob]

Hi, glad you like the content, you can clean it but I expect this needs a replacement encoder

[@aft3rgl0w]

@@Beardedbob oh ok i never really thought that you can get replacement parts like that but i suppose you re right. i wonder if it matters if i get another model's encoder since i actually dont seem to find for Viper but for razer manga instead. would it make a difference? i see the ads display various colours of encoders like blue or orange. Does it mean that each colour may prepresents different encoder specs? thanks very much for replying.!

[@sheikhtashdeedahmed2740]

Could you please mention the encoder version model of the Razer Ambidextrous mouse? It's Kailh EN8080 but the specific version, no idea. These encoders aren't measured in 9mm or 10mm.

[@Beardedbob]

Which Razer mouse? The viper

[@sheikhtashdeedahmed2740]

@@Beardedbob yes, the Viper Ambidextrous. The one in this video.

[@leinad4888]

I need help, i took apart the left and right click and little springs cane out, can you tell me where they go?

[@Beardedbob]

on the buttons at the back.

[@leinad4888]

@@Beardedbob thank you so much! I painted my mouse white and since i spray painted the rgb portion i got rid of that weight aswell! Your vid helped out so much and you deserve a follow!

[@gabrielst527]

I wanted to ask if there's a way to silence the clicking noise that you know? I heard that this uses laser on the click register so it doesn't really need to make sound when you make a click.

[@Beardedbob]

Not that know of but I've also not checked inside the switch, maybe I should.

[@sieghartprimeknight9]

Can you replace the switch on this mouse bob? I want to change it with kailh red I think...

[@Beardedbob]

No these later Razers only take Opto mech.

[@sieghartprimeknight9]

@@Beardedbob Thanks for the reply!

[@CaptHotah]

My click buttons are very squicky, i was thinking of open it up and lube them a bit. Cheers

[@Beardedbob]

R ok, hope this helps and let me know if that fixes the squeak

[@CaptHotah]

@@Beardedbob wow that much much faster and easier than i expected. Worked like a charm. No more squicks 👍

[@alignedtechreviews1385]

Can you try to replace the viper ultimates scroll wheel

[@Beardedbob]

The encoder or the wheel,

[@alignedtechreviews1385]

Beardedbob The encoder

[@LWeRNeO]

Hi, any ideas on how to fix LMB/RMB rattling? Maybe some o-rings? It just makes me crazy, and I'm one step away to replace my 4 months old Viper with one of Zowie.

[@Beardedbob]

You can try to pack them out so there isn't a gap or take it a part and rebuild it to see if that resolves the issue.

[@metecengiz4479]

Can I mount the hardware inside this mouse to microsoft wheel mouse? microsoft wheel mouse 1.1a shape is the best for my hand

[@Beardedbob]

Maybe but you will need a custom base as a min

[@metecengiz4479]

@@Beardedbob 👍🏻 thank you for answer

[@redzo8325]

why doesnt my viper have the screws under tho top glide? mine only has it under the bottom one

[@Beardedbob]

Not sure maybe they changed it

[@copyy2323]

Thanks for guide I still managed to fuck up my Razer Viper glides clicks and everything xd

[@kiral1525]

Do the seam whit the Raze Lancehead TE, please!

[@Beardedbob]

Teardown?

[@kiral1525]

@@Beardedbob yes! I have a problem with the sensor, I wanna check if any piece is out of place

[@viperrnya]

I have a question. I just removed the feet to put on some tiger arcs and below feet there is a plastic layer that makes the screws inaccessible. I didn't see that in your copy, is that normal?

[@Beardedbob]

Hi, You have spilt the PTFE away from the sticky base. The base is whats left on the mouse covering the screws

[@viperrnya]

​@@Beardedbob Ty so much. I was afraid to remove it so I don't break something but it was pretty unusual how the adhesive was almost impossible to remove.

[@eanmccraken3153]

Is it possible to replace the Razer switches with kailh red 4.0 switches???

[@Beardedbob]

not on the viper.

[@eanmccraken3153]

@@Beardedbob damn that's a bummer. Great video tho it's very intuitive

[@collins5647]

Can you feel any difference between viper mini and regular viper sensor?

[@Beardedbob]

yes I would say so but i'm going to run some more tests.

[@natey1x918]

hey bob i have this mouse and one of my side buttons just stopped clicking and now it registers if i blow on it what should i do?

[@Beardedbob]

RMA it with razer

[@michaeljoffman9700]

what microcontroller does razer use? (there is a link to aliexpress)

[@Beardedbob]

Not sure sorry. I would need to check the video. Is there not a closeup of the pcb in this teardown?

[@foxwoosh]

Hello! Thanks for your video. Can you please help me a little? How to put back these mouse feets? What do you use? I have Viper Ultimate, looks like they used double sided tape or something like this to put feets on mouse.

[@Beardedbob]

Hi, You can reheat them using a hair dryer or some double sided tape if they have lost there sticky back

[@foxwoosh]

@@Beardedbob So you wouldn't recommend any glue? :) Okay, thank you!

[@Gsoda35]

It is hard to hear the tiny noise of the mouse parts with the music on.

[@Beardedbob]

Things have hopefully improved in the later views i've done.

[@skraamansnothot3452]

Could you try replacing all the tech from Viper Ultimate to the g pro?

[@Beardedbob]

Comparison coming soon 👍

[@crankiermusic7436]

i feel my right mouse button rubbing against something. Do you have any fixes for that?

[@Beardedbob]

Probably they scroll wheel.. you can open it and readjust these buttons as they are screwed in. You might also have to file some off.... If its under RMA just send it back.

[@MikeleKonstantyFiedorowiczIV]

can you use pcb to made arcade stick?

[@Beardedbob]

Maybe but I’ve not seen it done

[@MikeleKonstantyFiedorowiczIV]

@@Beardedbob On second thought, a mouse doesn't have many buttons, and soldering into the + and ground might be difficult given the small size. It's better to buy a keyboard with 8000Hz; the hertz make a big difference. I have a mouse that runs at 2000Hz, and I can feel the difference in performance. In my opinion, hertz matter more than, for example, having 15k or 20k DPI.

[@jkmdh8921]

What switches can fit on the middle mouse switch? I plan to replace mine since it's inconsistent when clicked

[@HiddenLord]

hey mate! have you ever learn what is suitable?

[@jkmdh8921]

@@HiddenLord yeah, I've replaced it with the Kailh silent mouse switch (7.3mm height) the one with gray body and red button.

[@HiddenLord]

@@jkmdh8921 You, sir, are a real MVP

[@HiddenLord]

@@jkmdh8921 thank you again, it worked like a charm!

[@jkmdh8921]

@@HiddenLord Glad to help!

[@Michel_Merlo]

Is always awesome to check to videos after doing so dmg to your mouse, ty!

[@Beardedbob]

At least now you know what not to do

[@crankiermusic7436]

Is it possible to solder in kailh gm 8.0's into this pcb?

[@Beardedbob]

Not on this one as they don't use traditional switches which you solder they use a opto mechanical which doesn't use solder

[@crankiermusic7436]

@@Beardedbob so can i just pull them out and swap them for another set of razer optical switches? And if i can, do i need to remove anything else or can i just pull them out?

[@HowToHippopotamus]

can you reuse the old feet? Or do you just buy new ones?

[@Beardedbob]

You can reuse them but sometimes they lose their sticky back. You can use some M3 tape if they do. The best option is to put some new skatez on if you can.

[@HowToHippopotamus]

@@Beardedbob thanks :)

[@Nekopocalypse]

with this teardown i now know how to make this mouse significantly lighter. thank you sir

[@ethanhua3892]

Do you know if it is possible to paracord the mm710? I wanna customize it but the front part of the mouse were the cord comes out of it looks big.

[@Beardedbob]

Yep you can.

[@pressingrock]

hello there. I would like to ask if its possible to swap g403's scroll encoder into razer viper's 8khz? and if it isnt possible could you recommend a smooth scroll wheel encoder for razer viper 8khz or ultimate? because its so stiff i dont really like it , I prefer smooth scroll wheels. thanks in advance.

[@Beardedbob]

Unfortunately these aren't swappable. The viper uses a different encoder to most so unless the 8k is different to the stock (havent checked) then you limited

[@pressingrock]

@@Beardedbob thats a big letdown for me then, because i like the mouse but the scroll wheel is too stiff to my liking. anyway will try to find out what encoder is being used on 8k model

[@воображала]

@@pressingrock Hello, have you already found out how high is the encoder in Viper 8K from Kailh? :)

[@Pmoneyandfriends]

So I cant put my razer viper left and right clicks back on I took them off to check for double clicking and camt seem to put them back on need help asap

[@Beardedbob]

O dear. What is it you need help on?

[@Pmoneyandfriends]

@@Beardedbob ok so I went a talk to a few members on the razer discord and i just destroyed my frist gaming in week one

[@MrJunksynchron]

Awesome vid! Just got this mouse a couple weeks ago and I'm curious if it's possible to switch out the mouse cord for an alternative like a paracord. Thoughts? Thanks.

[@Beardedbob]

Yes you can.

[@Pastill-]

are the parts on the top shell for RGB?

[@Beardedbob]

How do you mean?

[@harrybrennavarro4106]

where I can find Razer replacement parts?

[@Beardedbob]

Donor mouse

[@harrybrennavarro4106]

huhuhu

[@UncleCorn]

Thank you so much! this video helped me diagnose an issue with my mouse, thanks for the assist (:

[@caiohenrique1467]

Thank You so much, very help me!

[@Beardedbob]

No problem glad it helped you

[@edmundjiang2570]

I'm trying to mod my Razer Viper but I can't find the size of the silicone scroll wheel... I want to order one of those womans silicone wedding bands to match my paracord. I think it might be one of the size 9 18.9mm ones but not completely sure because thats for the Viper mini and they might have different sized scroll wheels! Does anyone know?

[@Beardedbob]

Tricky to get the size I've been looking

[@3arctic3]

could you teardown a viper ultimate

[@Beardedbob]

Sure will.

[@benl8762]

@@Beardedbob I desperately to see it.

[@joshuayangg]

Can you review the Coolermaster mm710 mouse (when it comes out)?👍💯

[@Beardedbob]

Will be doing along with the UL2, Model O-.

[@daboiah189]

Great video! Please could you do a tear down video for the Razer Basilisk Ultimate?

[@Beardedbob]

Thanks glad you liked it. I do want to review / teardown the basikisk but I'm yet it pick one up and I've a lot to get through before I need to, so it might be some time yet.

[@OLD_80Y]

Encoder?

[@Beardedbob]

Kailh

[@ixKtop]

Nice vids, yo Bob how can I mod my left click, this feels so mushy

[@Beardedbob]

Hey dude glad you like it. Is it a viper you have? You can swap the switches for another razer one that users option mech ones but you have to buy another mouse to get them. You can also remove the strings from the buttons which stops them spring back up and keeps them flat on the switch.

[@ixKtop]

@@Beardedbob I removed the springs in the left click and this feels Lil bit better and weird but I like it, thanks for answer me

[@connor9222]

Can you remove replace the mouse cable?

[@Beardedbob]

Yes

[@cardink3170]

I've got my razer viper for about 2 months, the buttons started rattleing after 2 weeks, after 1 week its gone, but something still rattles when i move my moues fast i think its the side buttons because when i hold them down its okay, its just really annoying :(

[@Beardedbob]

Have you spoken with razer? failing that open it and see if you can find it.

[@cardink3170]

@@Beardedbob I didn't speak with razer, I didn't open it, I don't wanna lose my warranty by opening it, I could get a replacement pretty damn sure but I dont wanna remain without mouse for 1 week. The mouse working fine but its annoying that it rattles.

[@chunkylover5367]

I'm experiencing the weirdest issue with this mouse. The left click actuates when I lift up and touch down on the mouse pad. It's not that much force. I can basically turn it over and tap with my finger around where the left click switch is, and it still does it. Has anyone else had this issue?

[@Beardedbob]

I would RMA it.

[@mahbubrumy880]

You mouse teardown videos help me a lot. Keep making them

[@Beardedbob]

Np Mahbub Rumy glad I could help 👍 and I plan to keep them coming.

[@aloevera7596]

G302 PCB switch. Love your channel btw

[@Beardedbob]

I keep thinking I might do the G305 switch into a Zowie.

[@SamGalt]

Non soldered switches... That is super nice of Razer!!! It will make replacing them much easier! Although, if Razer's claims of 70 million clicks and no double-clicking is true for these switches, there will be no need to ever replace them in the first place.

[@southparkzoneguy]

well they're optical switches, so you can't replace them with switches that are not optical.

[@SamGalt]

@@southparkzoneguy True! But if Razer were to really cater to enthusiasts (as it seems they are trying to do with the Viper and the Huntsman TE), it shouldn't be too outlandish for them to eventually consider offering replacement switches for sale on their website at some point... And maybe (and now I'm admittedly dreaming here :) they could possibly even offer different feel/"weight"/resistance optical switches in the future (which could be matched by future mice models that were specifically designed to have switches easily replaced, like some offerings from Asus)! Again, none of that exists yet, but if Razer keeps listening, maybe these changes they're doing now could be pointing to something like this in the near future. "You may say that I'm a dreamer, but I'm not the only one" :P

[@Beardedbob]

I feel this is their a master plan and they have just prepared the Viper for this if they decide to take that path in the future. Maybe the other switches are in RnD

[@lenntronni5455]

My mousweel broke on my viper Gould you schon how top reasamble the mouse

[@Beardedbob]

Just reverse the teardown sir

[@lenntronni5455]

@@Beardedbob Do I have to glue on the feet

[@sml2238]

You have some excellent content that no one else is doing so I appreciate it. One bit of advice though is instead of doing a montage and playing music for the entire build. Talk is through it at least the important parts. I noticed you do this in your testing videos too. Talk is through the reslults and compare etc. I’m sorry but just watching these videos with no context just doesn’t seem right. I think most people would agree with me

[@Beardedbob]

Np, thanks for the feedback. I've done that on a few but wasn't sure if people wanted it. I'll look to add this back in 👍

[@sml2238]

@@Beardedbob yes no disrespect at all i just enjoy your content but thought it would be more enjoyable with some commentary along the way. keep it up!

[@susheelbalan8486]

GOAT - Greatest Of All Time

[@Beardedbob]

👍👌

[@tommy-mb7jh]

Hey bearded bob. I’d like to make a request that I feel gets overlooked. Could you please do a weight reduction video on the Logitech G600. Yes, this is an mmo mouse but I know that a lot of people out there use this mouse for mmos and would love to see a vid on how you can get this 130g+ mouse under 100g. Thumbs up if their are any mmo gamers out there that would like to see this!!!

[@Beardedbob]

I like the look of the new g604 so I might give they ago once I've got through some other. Best to request it here if you haven't already 👍 www.beardedbob.com/request-form/

[@tommy-mb7jh]

Beardedbob That’s a interesting looking mouse but I along with I’m sure many other mmo players would love to see a weight reduction video of the Logitech G600. I feel it will be fun to see how you can get a mouse that is over 130g as low as possible! I hope you can make this happen and I look forward to the video 😁😁😁👍🏼👍🏼👍🏼

[@Beardedbob]

leave it with me, sir, 😜 I'll see what I can do. Atm I don't have one so will look to pick one up. 😎

[@tommy-mb7jh]

Beardedbob Much appreciated!! I look forward to the video!! 😁😁👍🏼👍🏼

[@chrisdotdash5154]

Hi Beardedbob. I am having some trouble with my viper ultimate. When I press the scroll wheel in from the front of the mouse, it feels squishy and squeaky instead of a firm click. Since you broke down the mouse I was wondering if you would know what is happening. Thanks.

[@Beardedbob]

Hi sorry no idea

[@leepicfortnitefunniesxdfun4655]

Could be a manufacturing error

[@phz3202]

i have a g305 that i would love to mod with the viper's shell instead of paying 150$ for the wireless viper and i hope to learn how from u

[@Beardedbob]

Did you catch the Viper Mini G305 stream I did last week? if not here it is kzbin.info/www/bejne/oorSgIyoZ5edq7c

[@phz3202]

@@Beardedbob so there isnt any difference . right ?

[@duglasspolding1380]

Thank you for the video, do you know if this transparent logo with LED can be polished out? I mean if this surface is made of that transparent plastic and covered with black plastic? What do you think?

[@saitekina_og9271]

This is amazing thank you I took my apart I’m going to painted white :) this helped out a lot thanks please keep doing this

[@Beardedbob]

Np Daily Gamer Yo! glad I could help 👍

[@Frapies]

How did it turn out?

[@javiespinola4453]

como limpiar el click de la rueda

[@willjackson2041]

Good video, but please don't heat the sensor it can damage it

[@Beardedbob]

👍

[@0x1stvan]

Interesting, optical hotswappable switches without replacements

[@Beardedbob]

I'm hoping they plan to release some hot swap options in the future.

[@quadrofolgio3084]

Thanks for show how undress mouse

[@Beardedbob]

Np, hope it helps

[@pinknightmares4575]

It sucks that you have to remove the feet to access the screws.

[@Beardedbob]

Yeah, 99% do this to make the base look clean