How to Operate a Backhoe (2020) Pre-Op to Shut Down | Tractor Loader Backhoe Training

#BackhoeLoader #TractorLoaderBackhoe #JohnDeere310
Heavy Equipment Operator Training - Backhoe (TLB) training. Today we're going to do a complete training overview with our John Deere 310 Backhoe Loader. We will be going over four elements: pre-op inspection, basic controls, advanced skills and the shut-down procedure. Have questions/comments? Leave them below!
Here are the timestamps if you want to skip to a section:
00:48 - Pre-Op Inspection
12:50 - Basic Controls
32:18 - Advanced Skills
50:00 - Parking / Shut Down Procedure
A special thank you to RDO Equipment in Burnsville, Minnesota for allowing us to use their backhoe. Learn more about them ▶ www.rdoequipment.com/
^^^^^^^SUBSCRIBE TO OUR CHANNEL^^^^^^
Heavy Metal Learning is designed to provide educational content on how to operate heavy equipment; a forum for operators and industry supporters to share their knowledge; an opportunity to get out in the field; and ultimately inspiring the next generation. Heavy Metal Learning is a strong advocate for bridging the skills gap as well as seeing the need for quality instructional content on heavy equipment.
Check out our website: www.heavymetallearning.com
Contact us: [e-mail]

[@wooddesignwithtalent3975]

I started by watching your videos before i go for my license, don't want to lie the instructor didn't believe that it was my first time to be physically operating the tlb. Your videos are very helpful. Thank you a lot 🙏. New operator here,South Africa, Port Elizabeth.

[@edhultgren517]

I work as a trainer at a large nonprofit. We respond to disasters with saws, semis and heavy equipment. I love what I get to do and although I've taken our team through excavator, tele handler and skid steer courses, this will be the first time that most of them will be on a back hoe. I'm from California ranch country and grew up using back hoes but again, most of our team have never been on one. We're going to help a church that was donated a piece of property with a very old warehouse/shop on it. Our job will be to demo the building and load it into dump trucks. We'll have our skid steer, tele handler and a back hoe. I'm going to use most of this longer video to get our guys introduced to this very different machine. Thanks for your clear concise videos.

[@HarryGoulding]

I just love your videos. They are always thorough and informative, without any stuttering or pretentiousness. No ego at all in the way. I really appreciate that and admire that, and will do what I can to be sure I communicate with others in the same way.

[@VINAYAK.VINAYAK.]

ವಿಡಿಯೋ ಚೆನ್ನಾಗಿದೆ ಸರ್ ಅದ್ಬುತ ❤️

[@user-un3jk1bp1e]

I practicing on our backhoe at my job, couldn’t figure it out on how to unlock the arm until I watched the video thanks for the info great job

[@raul9456]

Last week I obtained my Excavator/ Backhoe certification, your videos helped me a lot, new operator here , thx Boss!!

[@terrymcgillicuddy8056]

Congrats 👍

[@HeavyMetalLearning]

Awesome! Congrats!

[@jcb3259]

Congratulations

[@trishseal]

Love all your videos! Thankyou! Love the swag too, nice hat.

[@jjcuna]

Amazing content 🎉

[@epicnaturals4763]

thanks for the great lesson, fam

[@gerlandkent6377]

thank, you for you're video.🙏

[@buck3409]

After you have checked things to the point that you have it running, instead of trying to look underneath for leaks, Make a boot mark at some reference point on the tractor. Like center of front wheel. Drive it forward 20ft or so to get it clear from the previous location. You can tell if you have any major leaks or minor leaks by looking for oils on the ground from the previous location. You smell the oil to know if its diesel or hydraulic fluid and/or etc. You can pinpoint the leaks location by referencing the boot mark you made compared to the location of the leak. May sound complicated, but it's very simple.

[@alexanderpalacios649]

Thanks a lot for the videos

[@carenmwikali4821]

very impressive!, thankyou f0 good training.

[@starkierronald1358]

All explained thank.

[@colleendavis4916]

Thank you for your videos

[@mikmik4279]

Looks amazing Lourice 🤗

[@jcb3259]

Awesome thank you

[@OmarTam-sd3yr]

Thanks you are the best👍

[@_P0tat07_]

For pre-op check, make sure no cylinders are bent, and make sure your radiator isn’t plugged with dust and dirt.

[@HeavyMetalLearning]

bent cylinder? Can't say I've ever seen that...but yes, guess keep an eye out for all of those.

[@_P0tat07_]

@@HeavyMetalLearning I’ve never seen it either, but I’ve heard about it. More so with subcompact and utility tractors. but it can’t hurt to keep an eye open.

[@darlingtonashman1919]

Waal

[@thanujadayasri793]

Thanks Sir !

[@kofiamoah8712]

I love it

[@terrymcgillicuddy8056]

Great video 👌.

[@HeavyMetalLearning]

Thanks!

[@jacksontamay5871]

Busco trabajo en este tipo de maquinas. Tengo más de 20 años de experiencia. Se mecánica ya la mayoría de componentes de blackhoe. 7.10 5.10 4.10 3.10

[@ireenmwangala9448]

this is so interesting 🤔 😳

[@user-yi2wl4km5x]

thank you nice شكرا 👍

[@HeavyMetalLearning]

You’re welcome

[@ra-lm8qm]

There's a button next to the steering wheel with an up and down arrow. Does anyone know what that's for?

[@JEEPSRTFAKE]

You lifted the bucket and levels in neutral, then rage backhoe, leaving you completely vulnerable to free rolling

[@HeavyMetalLearning]

Good catch...definitely a risk

[@lisagallegos1370]

do you have a video of how to load equipment onto a truck. ive seen a lot. but some seem crazy methods of loading. one video showed a backhoe getting on a truck with no ramp. the bucket was placed on the truck. the stabilizers lowered for hight and then the. boom was used to puch it further on to the truck.

[@HeavyMetalLearning]

Nothing on the larger equipment, but we do have a video on our channel for loading/unloading skid steer and mini-ex. I’ll see if we can do it with some larger equipment.

[@robd1859]

31:50 I've never heard them call Jacks I've always heard them called Out-riggers.

[@79terrafirma]

Backhoes are more about feel than visual in my experience. That makes them tricky to operate.

[@HeavyMetalLearning]

True...thanks

[@oscarethan8470]

Question how you know the perfect time to exchange the engine oil 🛢?

[@chiccenhawkc]

💯🔥💙👍

[@HeavyMetalLearning]

Thanks!

[@kevinabok4681]

I haven't got into the backhoe loader and from your videos it seem to be having no key?

[@moseskanyense9235]

Were is the battery located

[@jamesmaness6308]

Still don't know how to unlock the boom lock. You did not show it 😒

[@johndegroot8664]

One of the most complicated pieces of equipment

[@tittovarghese7916]

Sir backhol loader operater job vecancy

[@daytonfunk1835]

I'm attempting to dig a trench about 3' deep down a steep grade 2.5 - 3.1 for 250' Water, gas and power are to be trenched in. I have a JD 710K with a 40" bucket. Oh and it's a bit rocky... I'm looking for a video of how to accomplish it. Any suggestions from anyone welcome.

[@ipatron_gen]

Appreciate the vid but my goodness you're truly poor with handheld cam

[@pdbabe]

Ugh graders and combos are the only ones I never liked to operate.

[@HeavyMetalLearning]

Yeah...graders are prob the toughest machine I’ve operated.

[@jgomez4793]

How to operator motorgrader

[@HeavyMetalLearning]

We have that on our channel

[@danielhenry4614]

You forgot to call in a locate

[@rajeshnaik2009]

Mmkkk

[@tehnolife7331]

Samsung se 130 crawler excavator digs a big hole!Hard Work!Гусеничный эксковатор капает котлован! kzbin.info/www/bejne/kGLUgIx7rtRsgJI

[@knuttsackjones3094]

I hate these wishy washy top heavy bastards. As some guys know these patterns are ass backwards compared to a tracked excavator. I knew a guy that could switch back and forth without missing a beat, he didn’t stutter on a 4 stick either👍🏻

[@pdbabe]

I agree I never liked operating them

[@HeavyMetalLearning]

Not sure how they do it...but total respect for them!

[@johanneslaxell6641]

I admit that I don't understand why those backhoes are built like they are, but you should get to try a Lännen/Huddig/Hydrema/JCB 4CX. Turns on a dime, fast, powerful and versatile. Dig, lift, move and plow 👍🏼💪🏼...

[@munsters2]

Good video, except: 1. Screwy music 2. "With that said . . . ", "With that said . . . ", "With that said . . . ", "With that said . . . "

[@klauskarlkraus]

Pushing down on the front axle by lifting the boom when taking material is not good cause you need all wheel drive to use the power. What you do in this case is taking weight of the rear and lower traction. In my opinion backhoes are just for very small operations where you don't need a lot of power. Or what I call them. Useless piece of chunk

[@HeavyMetalLearning]

Interesting...thanks for comment!

[@HeavyMetalLearning]

Thanks for comment!

[@brandon18054]

There more useful than your comment was, that’s very clear.

[@brandon18054]

Sorry, THEY’RE.

[@moseskanyense9235]

Were is the battery located