How To Operate The Kwikset 264 Contemporary Electronic Deadbolt Door Lock

[@weldingandstuff]

Kwikset 92640-001 Contemporary Electronic Keypad Single Cylinder Deadbolt with 1-Touch Motorized Locking, Satin Nickel amzn.to/2y8VN4D TRY THE NEW !!!! Electronic Deadbolt Smart Door Lock, LED Touch Screen Keypad, Bluetooth Smart Phone Enabled Keyless Access, Easy to Install, Oaks Smart Lock (Smart Lock) amzn.to/2PGC5bQ

[@Ludmila2508]

This is the second home in which kzbin.infoUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we've replaced our "regular" doorbell with a Ring video doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn't require another thought to use).

[@TheBooster96]

Thank you for making this video! We moved into a new place and the previous owners had left this kwickset without any instructions! Took me like 2 hours to find this!

[@mingyuzhou8519]

Best Kwikset video I’ve ever seen. So clear instructions. Thank you so much. Every time I need to do settings, I watch this. Thanks heaps! :)

[@brianhouston8482]

Hello I would like to say thank you for this video, now I can use the kwiset dead bolt on my door again

[@joannebaileychisholm1126]

It’s videos like this that cause me to love the internet! Thankful that you posted this. I had lost my instructions.

[@weldingandstuff]

I really enjoy this lock; especially the auto locking part; thanks for the positive comment.

[@joeguerrero7941]

Thanks homie I spent 1hr triying to figure it out the instructions are complicated..ur video took me step by step and I was done I 5min...thanks for looking out

[@lynntomk]

I thought I was going to lose my mind trying to add a user code. Thank you for this great video. I put it in my keeper file for the next lock we have to install. OMG, who thought this would be so difficult!

[@jennifercook9514]

You're a lifesaver! All the other videos I found were for a different version of Kwikset. And the instructions included in the inside of the lock made it really confusing, giving the impression that the Reset key was Enter.

[@Nator316]

I add the new code but when trying to test the newly accepted code it blinks red 3 times

[@kryssylaze8369]

I’ve been trying to change it for an hour already! I should’ve check this vid first! Coul’ve saved me time! It’s done in just 2 minutes! Thank you!

[@bryankemker276]

Thank you for this video. It help me tremendously. The previous owner had no idea how to use it. This explained everything!!

[@weldingandstuff]

Great. This makes me feel good when my video helps someone.

[@karsenfochtman7820]

You are such a lifesaver! This is the only video that helped me delete the old code and create the new one!!!!! You are amazing

[@redtfurry8515]

Make sure when your programming it to wait for the kwikset button to light up after the user code. Example: 0000 kwikset (wait for button to beep and light up) push 4 (wait for button to light up again) then enter new code

[@ashleyhillman5522]

Perfect, this is just what I needed to change my codes. Thanks so much for posting this!

[@emilianaclery-nedd7316]

Thnks hommie tried using the electronic look for 1 wk then someone directed me to your video didi it in 5sec thnks bro 👍👍💃💃💃🙏🙏

[@weldingandstuff]

Cool; glad to be of help

[@omarkhan3768]

I am following your instructions and it's still not working! Is mine just FD up

[@thealishow9125]

same here

[@sam.kendrick]

Thanks so much for your effort in putting this together!

[@83SupaNatural]

I'm showing that all the codes are accepted but the kwikset button does not lock the door and the code does not unlock it when it's entered. What am I missing

[@simonmaersk]

Some of these people in the comments must be slow haha. I just installed this lock the other day. Took me less than 5 minutes to program. I didn't even use the manual at all, only the chart on the inside of the battery cover. I really don't understand why people don't get it. Great lock!

[@KeeganVera]

You are a true saint my man

[@lostphoenix.betaedition6965]

Thank you so much. I was punching my door in anger over this lock.

[@BGIS2000]

I wonder why many people struggle including me, maybe kwikset should find better solution. Thank you for your helpful video.

[@shill767]

Thank you for this great video. You helped me set up my lock and I’m so grateful. In the last week I’ve noticed when I leave, my Kwikset button has started flashing red like 8 times and now my code doesn’t work anymore. I spent 2 hours this morning with your video on repeat resetting everything. It accepts everything-pic code and new user code. But when I try it actually use it, it won’t work and the Kwikset button flashes red over and over. Can you please help?!?!?!

[@jeffjeffjeff]

How deep is the external portion of this deadbolt? I have a very tight clearance with a screen door handle, and this one LOOKS pretty slim, but I can't find dimensions anywhere! Thanks

[@alijahbeck]

"THANK YOU SO MUCH" LIFE CHANGER

[@chwest31]

Thanks for the Video! But for some reason I had to hit the enter button twice at the end of putting in my user code. Not in the instructions and perhaps it was a flaw in mine but how infuriating eh.

[@palaciosivan100]

My door is not locking or unlocking when I press quickset and it’s not unlocking either when I put in the code. What is going on?

[@Caglehead268]

I've had this lock for over a year with no issues. Today I go to change the batteries (brand new) and it will not take a new user code.. I've reset it over and over again, changed the program code to put in a new user code, then reset it again and used the default pc to program a new user code. It finally programmed a 6 digit user code, but it didn't unlock. Throwing this away and getting a new one.

[@masarothgames]

You're the man. Every one of these videos are amazing. Thanks for doing them!

[@smaurine]

If it's not auto-moving the deadbolt, does that mean I put it together wrong?

[@666elrey666]

wow got Mine today will gonna follow these instructions

[@BigSplashMerch]

You the man! Thank you sir for your time!

[@bruinbearjeanine7153]

I moved mine to a new door and it will not automatically lock. Even if I press the Kwikset button. No response... Just purchased new batteries, and still no response... Any advise? I attempted to clear the old codes with 0000 kwikset, 3 kwikset, and add a new code kwikset -but it did not work... How do I clear the old codes and set a new code since my lock had two different passwords?

[@bobbystephens9508]

Thank you so much!!! Saved me a huge headache!!!

[@sirfishesalot839]

Great video great instruction fixed and helped everything I needed

[@stanleyouyang4002]

I changed the PC and used a new UC. But when I used the new UC, the door locked but it would not unlock. I reset and tried several times after setting the PC and UC, I have the same result. WIll appreciate any help to solve this problem. Thanks.

[@lionheart7772]

Awesome video so helpfull thank you

[@stevenjenx6543]

Where does the battery go

[@11jlaughlin]

This was extremely helpful. Thank you!!

[@tracydao6834]

Thank you for the very easy instructions video

[@weldingandstuff]

+Tracy Dao you are welcome

[@johnpowers5165]

I've done everything step by step so many times, and nothing 😂 mine is all messed up

[@G-Hawks.]

I can do all this but i still need a key to unlock the door even when after user code used. I cannot unlock the door with just a user code. Kinda pointless of using code if key is needed to open or unlock

[@ixcancel]

Great video, Thanks

[@weldingandstuff]

Glad you liked it!

[@ASRCO]

Even after setting the code mine keeps beeping with a red light

[@rozinaramzanali]

I used the learn video first. kzbin.info/www/bejne/qn2Zg6iifLWNp8k Then this code video for that same problem. Worked

[@Lilmanwasco420]

How would I reset it if I jus moved in a house I want to change the code

[@Lilmanwasco420]

It was already there at the house

[@letscanoodle]

We ordered this Kwikset on Amazon and installed it this week. Once we got the Energizer batteries in properly, we couldn't get past the first step. We finally Reset, heard the 3 beeps, entered 0000 and Kwikset, then 0 Kwikset - It began flashing red and beeping after the first 4 zero entry and that was it. It will not work after many attempts and 3 videos. Just keeps flashing red and beeping. We took the batteries out and started again. Do you have any final suggestions before we give up? Thank you so much. Lorraine

[@fki1996]

Having the same issues did you ever figure it out?

[@mantracker-gx1bj]

Great video !

[@kathytellier3806]

So if you are still on here...you have to always have the automatic lock on to lock the door? Since there is no lock button on the outside there is no way to lock the door unless always having that feature on? If I am going in and out of the house during the summer or even company is coming and going outdoors..it will always automatically lock. Looking at an easier way to just lock the door when I leave.

[@weldingandstuff]

no you don't have to have the auto lock on to lock the door. Just push the kwikset button and it will lock the door.

[@kathytellier3806]

Welding and stuff thank you so much!

[@weldingandstuff]

You are welcome

[@malcolmbaron7834]

Awesome Vid bro - helped me a lot down in Aus.

[@МарияКривенко-т9г]

excellent buy I recommend it

[@JerrodPotter]

super helpful, thank you

[@KellyK387]

Mine keeps flashing red when I try to set it

[@weldingandstuff]

Have you watched my other video kzbin.info/www/bejne/qn2Zg6iifLWNp8k

[@TooOffensive901]

What's up. I just bought this and I love it. You CANNOT and I mean CANNOT skip the syncing setup. I burned up 10 minutes couldn't program it. It will NOT let you program it till you sync up. You have to follow the manual. Hope this helps.

[@mittikhak]

Thanks. You are Great 👍

[@xQUEENxPRx]

I change the codes and everything but still not locking or unlocking … I hate it

[@Joseinmiami]

Thank you

[@btsheaves]

There are also a few things you should not do because it makes the lock unfuctional and only using the reset corrects it.

[@melissadonaggio423]

When i enter the PC, to try and add a UC, it turns red after I hit the “1” and I can’t do anything ... so annoying.

[@weldingandstuff]

Have you tried resetting it kzbin.info/www/bejne/qn2Zg6iifLWNp8k

[@melissadonaggio423]

Welding and stuff thank you! This actually worked ..but now, my new UC only works when I test the door (lock it while it’s open). If I lock it, close it, and try the code..doesn’t work. ?

[@weldingandstuff]

make sure you follow these steps; when entering a user code you must first enter PC code, then enter #1 and then enter your code kzbin.info/www/bejne/i4Gtl4iffadji7c

[@melissadonaggio423]

Welding and stuff yup I did that and it works. It just only works when the door is open and locked. When the door is closed and locked, it makes the noise as though it’ll open but turns red and doesn’t - so frustrated.

[@weldingandstuff]

Melissa Addonisio that’s strange. It can be two things; weak batteries or the lock is in a bind. Try putting new batteries, one time I bought new batteries and they were no good.

[@gregc.brownassociates6678]

Great! Thank you!

[@furiousbicuspid1053]

Cleveland...is that you ;)

[@weldingandstuff]

Lol

[@girly4673]

Thank you!

[@jimself1954]

Cant see the buttons you are pushing and volume is low. Sorry.

[@claudeldonatien5411]

This doesn’t come with a key at all?

[@weldingandstuff]

Mine came with a key

[@vandshome]

Mine not lighting up

[@Apriell615]

My deadbolt will not lock. It accepted my code, but it will not lock

[@weldingandstuff]

ReinaNegra try to reset it kzbin.info/www/bejne/qn2Zg6iifLWNp8k

[@btsheaves]

You don't use a code to lock .only the kwikset button.

[@sanjuanitagomez1651]

Cannot see what your doing

[@wesleyyu7681]

Not working on my lock. Everytime When I enter my PC and press 'kwikset' button , the button turns red and yell 'beebeebee'😂. Never shows what you have done in the video

[@toddnachtweih173]

❤

[@flippyty1233]

I can hardly hear you and your hand is in the way thank you.

[@giuliom8520]

You forgot the most important step to explain, that is how to use the basic code that it comes with. Once I changed the code, how do you use it? You don't explain that. You skip right over the basics and jump right to other stuff without giving us the very basics. Teach in small peogressions.

[@Dave-tw9ib]

move your dam hand

[@z9944x]

Stupid cheap lock

[@barbaralopez5909]

I changed the PC and used a new UC. But when I used the new UC, the door locked but it would not unlock. I reset and tried several times after setting the PC and UC, I have the same result. WIll appreciate any help to solve this problem. Thanks.

[@weldingandstuff]

Barbara Lopez did you follow these steps kzbin.info/www/bejne/qn2Zg6iifLWNp8k

[@michaelhart1440]

Thank you!!!