How to Pack and Ship Plastic Models

In the video, I show the techniques I use to safely and successfully pack and ship my commission built models all over the world. I've shipped models for years with great success using these techniques!
#shippingplasticmodels #packingmodels #transportingplasticmodels
Make sure to follow Me Online:
★www.flyingsmode...
★ / flyingsmodels
Here's a list the materials used:
Airfix Spitfire: amzn.to/2yomvtO
Upholstery Foam: amzn.to/2TrQYOP
Poly Fil: amzn.to/2z9nuyu
Xacto Knife: amzn.to/2WQ9brs
Razor Blades: amzn.to/2yjHSwc
Tie wraps: amzn.to/2LIYb8Y
Sharpie: amzn.to/2LIY4u4
Gel Pens: amzn.to/3bSSdNk
Packing Tape: amzn.to/2ZzPl5N
Boxes: amzn.to/3cQXKW8
The Camera I shoot with: amzn.to/3bPbuPK

[@johnhill8745]

You’re a life saver, thanks! Going to need a big foam pad for my B17.

[@FlyingSModels]

Glad you found it. This method has worked out great for me. I've shipped a 1/48 B-17 and 1/48 AC-130 this way and it does require a big foam pad. Fortunately Hobby Lobby sells 'em. Good luck with your Fortress.

[@gendoikari6062]

Best method Ive seen. I used to throw any models away before I moved to other location, and promised to build them again. Ive build the Monogram B17G five times already, and now Im ready to move again....( joking ) This is a good solid and safe way to keep those priceless creations with you..Thanks!

[@FlyingSModels]

Thanks! This method has worked well for me. I have built and shipped a B-17 model 900 miles away without any issues using this method. Glad it helps!

[@bgdavenport]

I have a similar technique that uses less foam, but the idea of shock isolation is the way to go. Those folks who used packing peanuts must love to replace itty bitty bits! Instead of the one-use zip tie, I use pipe cleaners. Great video! About time someone with a technical background addressed this subject.

[@FlyingSModels]

Thanks, Chuck. Pipe cleaners are likely a bit better. Your right, no place for packing peanuts!

[@joekmodels]

Great video, something not discussed to much. I'm sure I'll be referring to this in the future.

[@FlyingSModels]

Thanks. Definitely will come in handy if you start selling and shipping your models!!

[@joekmodels]

@@FlyingSModels Great info as usual :)

[@FlyingSModels]

Thanks, Joe!

[@davidfusco6600]

I build commercial aircraft in 144 scale, and the 747’s tend to be pretty big. Nearing retirement age, we’d like to move to a warmer climate, but I always worry about my models being shipped. Thanks for the great idea!

[@FlyingSModels]

Hi David, glad the video was helpful. The 747 is a big one in 1/144 and would do well with this packing method. Good luck with your move and congrats on the upcoming retirement. Thank you for taking the time to provide some positive feedback!

[@chancerNW]

That was both a different modelling topic and very useful.

[@FlyingSModels]

Thanks...glad it was useful.

[@EddiesGarage]

That's a very effective and trustable package technique. Thank you for sharing it!

[@FlyingSModels]

Thanks. I’ve shipped hundreds of models using it. Hope the video helps!

[@foreverplastickits138]

*Simple and effective, cheap price too so yes, it's a good idea!*

[@FlyingSModels]

Thanks! Hope it helps.

[@blacklupos]

Wow thats really neat and great idea! I was always afraid of moving my models or taking them to a show. Thanks for sharing

[@FlyingSModels]

You bet. Glad it helped out!

[@garybrounstein7725]

Thank you for sharing that technique on packing models in boxes. I’ll use it when shipping my large super detailed Guillow’s 1/15th scale Mustang. I also learned a lot from some of your good feedbacks too..

[@FlyingSModels]

Glad it helped. Would love to see some pics of the P-51 if you want to share over on my facebook page: facebook/flyingSmodels. Thanks!

[@jordyncollier919]

Oh this makes a lot if sense haha

[@FlyingSModels]

It's always been effective for me.

[@SprueFascinationChannel]

Nice and reliable packing method, thanks.

[@FlyingSModels]

Thanks. It has served me really well!

[@RangerChris61]

Very informative, only thing I would add is that it might help to by attaching a piece of tape or two to the bottom of the foam to help attach it to the bottom of the box.

[@FlyingSModels]

Actually, it's better from a "shock" perspective to have just a little opportunity for movement/cushion. Also, the foam base is pretty much held in place from the friction against the box walls. Thanks for the feedback.

[@gendoikari6062]

Very helpful tip.. Thanks!

[@FlyingSModels]

Glad it was helpful!

[@tyschlarb4695]

Hello great info

[@FlyingSModels]

Thanks for the feedback, Ty.

[@manolislambros2423]

Beautifull technique. It seems that is working pretty good. I have only one question. What about airplanes that has lot's of weapons like a fully loaded fighter or a bomber etc. Because i am a modeller for years, we must also consider durability and the stability of those wings while we use the tyre ups if you understand what i mean..I am trying to imagine how to tight a fully loaded SU-27 using this way of packing for a post somewhere. Do you have any suggestions on that?Have you try it because a Spitfire is not so difficult situation to prepare.

[@FlyingSModels]

Thanks for the feedback. I have shipped some loaded out modern jets using this technique. I typically will just put the zip ties and foam standoffs around the fuse instead of the wings. It does get tricky, sometimes, to find the right places to "lock it" down without impacting the weapons load.

[@eb311235]

Use pipe cleaners nstead of tie wraps.

[@FlyingSModels]

Great idea....thank you!

[@micrometer1484]

Any advice on a 1/700 HMS Dreadnought ship with rigging in the mast?

[@FlyingSModels]

That's a challenge for sure. I have shipped models like that (not as complicated) upright with pillow batting around the rigging (given that I use EZ line rigging and it's flexible). What type of rigging? And if you want, you can send me a pic to my facebook page (messenger) and I can brainstorm with you.

[@nostalgicshark3]

How much would a 1/48 f-14 tomcat commission build and shipped run me do I have to supply my own model? Thanks for your time and great video that’s probably the best way I’ve seen how to pack model aircraft

[@FlyingSModels]

Thanks for contacting me. If you want to talk more about a specific model project, do me a favor and contact me through the contact feature on my website. Here is the link: flyingsmodels.square.site/ It will be easier to discuss things that way. I appreciate the good feedback on the model packing video. Cheers, Chad.

[@louislopez55]

I'm watching this and wondering if it will work for a 1/35 tank. I will give it a try, off to Wal-Mart for some foam and fill.

[@FlyingSModels]

I would think it would work even better for tanks. They don't always have a many fiddly bits as the planes do. If you find it at Walmart, let me know. All that I have ever found is the thinner stuff (like 1") versus the 3" pillow foam that I pick up at Hobby Lobby.

[@nostalgicshark3]

I have an idea for video, how to hang scale model properly from ceiling just a thought.

[@FlyingSModels]

That's a good idea. I need to figure that out before I make a video as I never hang mine...haha. But I know lots of folks do. Appreciate that.

[@nostalgicshark3]

@@FlyingSModels no problem glad I could be of help

[@FlyingSModels]

@@nostalgicshark3 I always appreciate ideas for new vids!!

[@tyschlarb4695]

I really want to get the same type of pillow foam but can't find it or the link can you please tell me where i can purchase the pillow foam?

[@FlyingSModels]

I get mine from my local Hobby Lobby. Hope this helps.

[@No1PepsiFansProductions]

Can you also ship built models inside the original box

[@FlyingSModels]

I don't think that would work for most models. All the ones I've built seem to end up bigger than the original box.

[@No1PepsiFansProductions]

@@FlyingSModels I have a max factory gipsy danger model kit which the box is a lot bigger than the model

[@shumyinghon]

thank you for your sharing - have you factored in the fact that they throw our packages ? do you think it could withstand such abuse over international post? thank you again

[@FlyingSModels]

Sure thing. I factored all that in when I came up with the method. I've shipped across the globe with good results. For example, shipped a WNW biplane from US to Germany without any issues.

[@shumyinghon]

@@FlyingSModels thank you! i shall try it

[@FlyingSModels]

Let me know. Hope it works as well for you as it has for me over the years.

[@bgdavenport]

I use a similar technique. I demonstrated its effectiveness by throwing the box across the room of my model club meeting. I opened the box to reveal an undamaged 1/72 scale B-17.

[@FlyingSModels]

bgdavenport now that’s impressive. Hopefully you took a video :)

[@Kairasp1]

Sir hi, a bit of advice, please keep the back ground music low, as we can`t hear you. Thanks

[@FlyingSModels]

Thank you for that. I think I have gone away from a lot of background music in later videos. Trying to learn and improve with each video and this kind of feedback helps me do that. Appreciate it!

[@rowdeo8968]

How about wooden huge model airplanes I want to pack for shipping?

[@FlyingSModels]

That may take a little different approach. Is it a solid wood model or a stick and tissue (or similar) model?

[@rowdeo8968]

Most are combination no tissue. I can send you photos my hubby built them

[@DTczsk1999]

👍👍👍🌈

[@FlyingSModels]

Thanks for the feedback!