How To Paint a Door Knob or Any Metal Hardware to Last - Reviving Pine Drive

[@wonderwhat4]

I like how you used large yogurt type containers to hold your door knobs for spraying. I'm going to remember that one. Thanks.

[@OriginallyWorn]

Glad to help! Thanks ❤️

[@carolinagirl3110]

So glad I searched and found this.....never thought to actually paint instead of buying....you have saved me quite a few coins.....I can't wait to do this....thanks!

[@OriginallyWorn]

So glad to help!!! Hope you have a great day!!

[@SoCalRhetor]

Not really. You can buy a six pack of good looking (non brass) door knobs at Home Depot every year in November and December for around$25. The cost of primer/paint will cost you about the same, and the time... well, we don't even need to talk about that.

[@SBCFrannykins]

Thank youuuuuu! This is just what I needed! Looking at replacing all the 26 door knobs in my home was daunting! ( plus too expensive! Who knew door knobs were so expensive?!) These look so elegant and feel smart knowing it’s an easy DIY. The set up for painting you showed is genius!! Especially for me since I always seems to make a mess! Thanks again!!

[@SBCFrannykins]

I read the blog post and was hoping to get an idea of how long to let it dry? You just said “let it dry good.” How long is that?

[@OriginallyWorn]

Hello! I hope this helps you save some cash! I have had mine down for years and they are still great. I will say I did start to slowly replace them as the years went on for various reasons and as I could afford to. I let some of mine dry longer then other times. I would say at least a few hours between coats and overnight at the end for them to cure. Also depends on the climate where you are spraying. A hot humid garage is going to take longer then a basement. Hope this helped! ❤️

[@kerrishultz8748]

Great ! I did this with our bathroom light, toilet paper holder and now Im going to do door hinges and knobs.

[@OriginallyWorn]

Hope you love the new look ❤️

[@jv-ep2tc]

i am def doing this. and what I also really appreciate is your very winning personality and pleasant manner of speaking.... a refreshing change from what one often finds on this site.

[@OriginallyWorn]

j v thank you so much for your kind words ❤️

[@craigsbuc]

I used this for the grab handles for my car. It worked Perfectly! Thank you 🙏🏽🙏🏽🙏🏽

[@OriginallyWorn]

Wonderful! Thank you!

[@hackonefouryou]

Just simply amazing. I'm going to try the 2x Rustoleum in a semi gloss black to get rid of the brass look on my front door hardware. If you can do it I can too right. These videos are inspiration right now since we're all stuck inside.

[@OriginallyWorn]

Thank you so much!! And you can certainly do it! My front door hardware was brass, and I sprayed it too. Not a ding on that one 🤪 front door hardware is way too expensive to replace for me 🤪

[@sandysnitz4255]

Thanks, This is exactly what I needed for my kitchen cupboard handles! I was planning on black so it was great that I could see the black on your site!!!

[@OriginallyWorn]

Sandy Snitz glad to help :)

[@sarahirving]

I’ve just ordered the primer and paint from Amazon to do my door handles knowing full well I’m gonna get my husband to do it

[@OriginallyWorn]

🤣🤣🤣 that’s great! Well, you have done a good job gathering supplies! That’s a job needed done too! 😘

[@ADMESSIAH]

I've done this several times looks great for awhile but the heavier used door knobs will show use. Recommend replacing most used door handles like restroom etc

[@OriginallyWorn]

Good advice!

[@stephanieb531]

Thank you for the info. I do appreciate the extra step as we're have young children who are constantly messing with the drawer pulls.

[@OriginallyWorn]

Thanks for the kind words!

[@txgrandma3]

This is a very well done tutorial. Thanks for your great info and I am hoping to do this in the next few months. Thanks so much!

[@OriginallyWorn]

txgrandma3 thank you :)

[@sandysue202]

Thanks so much for this video! I need to visit Lowes or Menards and pick up the spray paints I need and redo a bunch of doorknobs this summer!❤

[@OriginallyWorn]

You are very welcome! Sounds like a perfect summer project ❤️❤️

[@CAROLYN143-8-9]

THANK YOU SO MUCH FOR SHARING THIS VIDEO 👏😊. I'M DOING SOME RENOVATIONS AND HAD 2 FARMHOUSE BARN DOORS 🚪 INSTALLED. SO, I WANT TO FINISH THE ENTIRE ROOM(S) WITH THE MATTE BLACK HARDWARE. YOU JUST SAVED ME HUNDREDS OF DOLLARS 💸.

[@OriginallyWorn]

So glad to help!! Hope you love your new space!

[@CAROLYN143-8-9]

@@OriginallyWorn ABSOLUTELY ❤️ ALSO NEW SUBBIE 👋

[@OriginallyWorn]

@@CAROLYN143-8-9 YAY!! Thank you so much!

[@howardsend6589]

Unfortunately, my experience of longevity is not great. Did primer, paint and a matt clear coat with extended drying time between. They look great when done, but the paint is easily scuffed when fitted, exposing the brass. I ended up replacing knobs with new ones. I wish you luck if you try.

[@OriginallyWorn]

Howard Send aww that’s too bad. Bummer!! Mine have held up fine so far 😬 but even if they only last me a year or two I will be happy.

[@joonyaboy]

Howard Send you need to scuff up the handle with a wire wheel on a drill first

[@jackieo8343]

I am actually painting my cabinet pulls and knobs right now using your method and they turned out terrible 😭😭. You can see the white primer through the matte black paint despite putting 2 coats of the black paint. Just ordered new hardware from Amazon.

[@HelloLove4]

Mine scratched up just putting the knob back on. So disappointing, I buy all the primer in the paints and the protective coat trying to save money and not have to buy new knobs and now I have to buy new knobs also

[@OriginallyWorn]

So sorry guys! Not sure what your issues are. Mine are still going strong. 🤷‍♀️😬

[@joannepollak5843]

Great tips for do it yourselfers! Very clever ideas! ❤️

[@OriginallyWorn]

Thank you!

[@kittybeard5379]

Great video! Getting my paint to redo all my doorknobs!

[@OriginallyWorn]

Thank you! Enjoy them!

[@gaylehimmelwright6376]

Great tutorial! I did the knob on my bathroom closet about two months ago, and it still looks perfect, so I just did one of the two faucets in the bathroom and am ready to do the other one. Hopefully they hold up well too!

[@OriginallyWorn]

Gayle Himmelwright thank you! Great job!!! I have never done a faucet knob, let us know if it holds up :)

[@frankielandry3699]

@@OriginallyWorn o

[@hereford89]

How has it held up?

[@breem8750]

Did it hold up

[@gaylehimmelwright6376]

@@breem8750 The doorknob has held up perfectly, but the faucets haven't. I think the faucets just get cleaned too often.

[@docegger26]

Great job, I am going to get started. Here’s fingers crossed.

[@OriginallyWorn]

Adam Egger thanks!! You got this! Best other advise. Allow good try time between layers.

[@WendyWilliamsLiving]

Thank you for this great tutorial. I'm going to save $ by painting my cupboard hinges which are excellent quality, but need to be freshened up.

[@OriginallyWorn]

Wendy Williams thank you!! That’s a great plan ❤️

[@SpecialK2644]

Looks great! I am convinced to do my kickplate in bronze! Thanks!

[@OriginallyWorn]

That would be very cool!

[@bluechipdc]

AWESOME VIDEO! After seeing this, I hit the subscribe button.

[@OriginallyWorn]

Thank you so much!

[@rschm12]

Awesome tips! Thnks for the video! WE are going to attempt to spraypaint the inside of some pendant lights we found and was looking for the best way to paint on metal - this was a very well done tutorial! :)

[@OriginallyWorn]

Thank you so much! I hope your lights turn out great! Also, thank you for your teaching pre-K! I have two little kids (now elementary school age) and could not imagine teaching at any age, let alone pre-k. (Assuming from your KZbin name ;) )

[@uptone12111]

Thank you so much-was just about to go buy some paint.

[@OriginallyWorn]

Glad to help ❤️❤️❤️

[@dez5]

short and sweet video.

[@OriginallyWorn]

Thanks!

[@tacosmargs58]

nice job, gonna use this in a couple weeks when I do my bathroom knobs and cabinet pulls

[@OriginallyWorn]

Cheryl Ferry thanks! ❤️❤️❤️

[@chatwithjat]

Thanks, I was debating paying $150 for door knobs which probably needed adjustments. At that price point, I might as well take 3 hours to do this.

[@OriginallyWorn]

Dang, that’s a pricy one! Spray paint is certainly cheaper for that one 🤪❤️

[@gloriat7757]

I have 9 doors that I need to replace the knobs/hinges and it’s ridiculous how much Lowe’s charges for just ONE bronze door knob! I’m so happy I found your diy video on spray painting them instead! How have your repainted doorknobs held up so far? Brass doorknobs are so not my style lol! 😂

[@OriginallyWorn]

Elizabeth A thanks so much for your kind words. They have held up amazing so far and you wouldn’t be able to tell they are painted at all.

[@gloriat7757]

Originally Worn Exactly what I wanted to hear! You are a life saver, thank you! I’ll be purchasing the needed products tomorrow!! Keep up the terrific, creative work! ❤️

[@OriginallyWorn]

Elizabeth A awesome! Thanks! There are links to everything in my amazon store if you are buying from there. Www.amazon.com/shop/originallyworn

[@Bbookt10]

Thank you so much for sharing this! We’re buying a new construction spec home, and the ONLY thing I’ll miss about our rental is the door knobs. I think they make such a difference in the look of a house (they’re a dark bronze/black color). I was thinking eventually we would replace the knobs in our new home but that’s going to get pricey. I didn’t even think to spray paint them! Thank you so much for your helpful video. Do you recommend doing anything special to knobs with locks to ensure good coverage and no scraping when locking/unlocking? Thank you!

[@OriginallyWorn]

Brieann Bookter hey! I would recommend replacing the ones with locks that get used often, along with doors that do. Or know that they may not be perfect - mine now have a few knicks in them, which doesn’t bother me, but if that would you, I would look into replacing.

[@marg233]

Great tutorial 👏🏼 job well done 👍🏼💃

[@OriginallyWorn]

Thank you ❤️❤️❤️

[@stormygirl1704]

Thank you for this video.

[@OriginallyWorn]

❤️❤️❤️ thank you

[@HoosierGal28]

Hi, thanks for this tutorial! I’m wondering - did the knobs feel sticky at all once finished and dry? That is my biggest fear in trying it.

[@OriginallyWorn]

Hey! No, mine do not feel sticky at all!

[@kittykatFL23]

Thanks for all the great tips! 😄

[@OriginallyWorn]

Katy D thank you!

[@kittykatFL23]

Originally Worn I painted my kitchen hardware black matte and they came out beautiful! Thanks again!

[@OriginallyWorn]

Katy D wonderful to hear ❤️❤️❤️❤️❤️❤️

[@sheilasavard6491]

Very helpful, best one I have seen. Thanks!!

[@OriginallyWorn]

Thank you!

[@mademoiselleB12]

Very helpful

[@OriginallyWorn]

Thank you!

[@TuneInJesus]

Hi! Thank you for the video. Can you provide some follow up photos of Th e wear and tear on the door hardware?

[@OriginallyWorn]

Hello! I’m sorry, I can’t add photos to comments on here. It will not let me and my other social media channels mostly got hacked and shut down a year or so ago. But I can tell you that most of them wear on the hard edge and it is minimal. No wear on the hinges. Wear on the strike plate where it hits the door lock.

[@TuneInJesus]

@@OriginallyWorn thank you for replying ❤️

[@pattizagar6766]

Thanks for this

[@OriginallyWorn]

Hope it helps :)

[@shelinaali]

Thanks for this. Why did you decide not to sand down the door knob? I feel like I see a lot of people sand down and then apply primer and then paint. Keen to know when and if I need to sand down

[@OriginallyWorn]

Shelina Ali you certainly can. I felt that mine weren’t as slick as some styles are and therefore didn’t do it. Plus I used a high adhesion primer. But it isn’t going to hurt anything to sand them :)

[@jessicashavies4535]

Thank you for this! Thoroughly enjoy all of your videos and so so helpful :-)

[@OriginallyWorn]

Jessica Shavies thank you ❤️

[@salk2157]

Hiya hun great job, just wondering how they are holding up? Thanks:)

[@OriginallyWorn]

Sal K hey! A few of the knobs have a few knicks but the other things I painted are still perfect, so I am still happy with it all :)

[@renegenung2027]

St

[@jewelofwisdom8279]

@@OriginallyWorn Do you think the knicks are due to the finish not drying completely since only done of them have them or if not, how do think they can be prevented? Thank so much!

[@debsnider919]

Do the hinges also...great look

[@OriginallyWorn]

We did :) thanks!

[@michianamom6343]

Does the door close as easy as before? I have done this to several doors but the latch part (in the strike plate) doesn't slide shut as well. I have to turn the handle and intentionally close it, It doesn't just glide close. Also, for anyone watching this, do the hinges one at a time so you don't have to take the whole door off. I have 5 doors in my master bath/closet area. I did the top hinges first. When they were finished and reinstalled, I did the middle hinges. Simpler than doing the entire door at one shot.

[@OriginallyWorn]

I have had no problem with my doors gliding easily. But you could replace just the strike plates if that became an issue.

[@Tmesso]

THANKYOU.....VERY HELPFUL!

[@OriginallyWorn]

Tmesso thank you

[@aaronsnyder4176]

Short strokes work better in my opinion never lay on the trigger half second to a second tops.. Practice makes perfect. Just from my experience. It turned out just fine. Good vudeo

[@OriginallyWorn]

Thanks for the tip! :)

[@charbelkhouri9653]

exactly what i was looking for. im wondering if this will also work with metal legs with nickel finish.

[@OriginallyWorn]

Charbel Khouri thanks! It certainly should :)

[@samanthaharris230]

About how many doorknobs have you been able to paint with one can? I have 26 knobs I need to either replace or paint and I’m trying to decide if it’s actually cost effective.

[@OriginallyWorn]

Samantha Lutz hey! You know, I didn’t really keep track. I did all of them in our home but have no idea how much spray paint I used. I do know that it was more then I thought it would be. I did do the math on one batch, can’t remember the specifics just that it was cheaper to paint. BUT if I had it to do all over again, I would buy new knobs/strike plates but spray other fixtures (towel racks, toilet paper holders, etc) and hinges. Everything has held up fine but the strike plates and a few of the knobs have nicks. It doesn’t bother me... but they were a bit of a pain to spray also with the angles. 😂🤷‍♀️

[@samanthaharris230]

Originally Worn thank you so much for your reply and honesty! Was debating doing it in our basement bathroom that doesn’t get used much but I think I’ll still with new simply because I know ours are going to get used quite a bit for the most part

[@OriginallyWorn]

Samantha Lutz you’re very welcome! Not a bad choice :)

[@debravallejo8819]

Do you need to use the bonding primer if your original color is a gloss black to get it to a matte/satin black?

[@OriginallyWorn]

That’s up to you. There is a chance it won’t stick as well without it, but most spray paints claim to have a primer built into them. Cleaning well and a scuff sand will probably go a long way for you too.

[@homesstell6014]

Can you tell us how it’s held up a year later? I want to try this in a few weeks but don’t want to waste my time if it won’t last a least a year or two! Thank you!!

[@OriginallyWorn]

Homesstell hello. All the hinges, towel bars, light fixtures and toilet paper holders are perfect. The strike plates are half worn off on doors we use. Most of the door handles look as good as the first week I put them back in. The have a few knicks and spots but overall are still good.

[@homesstell6014]

Originally Worn thank you so much !!! This is such helpful context!!

[@OriginallyWorn]

Homesstell you’re welcome ❤️

[@hlucienne]

Great info thanks!

[@OriginallyWorn]

Lucienne Henneberry thanks!

[@jol7486]

Not sure if I missed it but what about the key hole? Just paint over and use the key to open it up after the fact?

[@OriginallyWorn]

Jo L these don’t have key holes, but yes, you could just paint over them lightly.

[@MadHatch]

Metal looks way better than color/paint on furniture. Especially brass, you can polish it and even coat it after to protect it.

[@robine5454]

I've seen recommendations to use etching primer. I don't know if the bonding primer is the same thing.

[@OriginallyWorn]

Not sure either 😬

[@bertings6372]

Hi! Would like to ask how I can paint the door hinges without removing them since spray painting inside the house is too risky health wise

[@OriginallyWorn]

Hey. I did remove all of mine to paint. If you didn’t want to do that you could try painting them with a chalk paint because that has high adhesion.

[@sarj4real]

Good Tutroial! would this paint be water proof? planning on painting bathroom tap lever. TIA if can help

[@OriginallyWorn]

Hey. It may work for a short term solution but I wouldn’t recommend as waterproof. You could try the same basic steps but switching out the topcoat for something with better waterproofing ratings if you want to test it out.

[@rawtruthisahardpilltoswall6180]

Great video. Question, there’s no sanding needed before the primer you used?

[@OriginallyWorn]

Thanks. I did not, mine had a rough texture to them some. And it is not required by that primer. But you certainly could. It would only help.

[@rawtruthisahardpilltoswall6180]

@@OriginallyWorn thank you very much, have a great life.

[@OriginallyWorn]

❤️❤️❤️❤️

[@OldSchoolNoe]

2 Things; once you wash the hardware wouldn't you clean it even more with stuff like "Bar Keeper's Friend" or Brasso? Also I assume the paint&primer can should be enough, going to try 1 door without using that initial primer coat.

[@OriginallyWorn]

OldSchoolNoe you certainly can clean it with that if you want, I didn’t find the need. And you can do the paint & primer together. I don’t typically trust that type of product as a primer on a hard to stick surface, but it’s probably fine.

[@OldSchoolNoe]

@@OriginallyWorn Spray painted the hinges and about 17 hours later I can scrape the paint off with my nail. I'll let it cure for another 31 hours. If it doesn't adhere I'll strip the paint and sand the hinges with P400 and use a primer before using the paint&primer.

[@lanishayoung2129]

How is the paint holding up? And is it durable to scratches? This looks amazing

[@OriginallyWorn]

lanisha young hey! A few of the knobs have a few knicks but the other things I painted are still perfect, so I am still happy with it all :)

[@dananold6910]

Ok, Here is my question. Does anyone have an answer? I got curtain rods, rings and finials. The rods came in black but the finials and rings are a pewter color. Do you think I can antique the poles using this method. Maybe spray a bit of silver on the black poles, use a sponge or cloth to dab and then do the top clear coat?

[@OriginallyWorn]

I think that would totally work!

[@manuelramirez4716]

So its the farmhouse black the same as the flat black???

[@OriginallyWorn]

Manuel Ramirez i imagine they are close, but I’m not sure. Farmhouse black may have a bit of brown to it... but I’m just guessing

[@randyman8984]

I am doing this now and found your video by searching. We use those 16 oz Styrofoam cups around the house alot so pulled 6 out of the trash and used them as my holders. They work great cause you can just poke it right through. I poked the screws right throught the side underneath the door knob on top so I can paint them. How long do you wait in between coats?

[@OriginallyWorn]

Randy Man wonderful!! Yes, those would work great! I tried to wait overnight but I think you probably only need to wait an hour or so. I believe it says the recoat time on the cans :)

[@randyman8984]

Just finished about 5 doors. They look great but I realized the dang door hinges are brass too, UGH. I am going from brass to black

[@OriginallyWorn]

@@randyman8984 Great Job!! 5 down!! I actually painted my hinges too, and all my bathroom fixtures and even a light in my bathroom like this :) It sucks to take the doors down, but does make a difference in looks in the end :)

[@BlendedBarbieDoll]

What is the time frame between costs to dry and total dry time? Thank you

[@OriginallyWorn]

Depends on a variety of factors but I liked to leave 12 hours between coats. They can’t be sticky at all when you spray the next one.

[@courtneymelanson7075]

This paint is unavailable on amazon for some reason. These look great. Are you aware of any other black that may be comparable?

[@OriginallyWorn]

You should be able to find it at your local hardware store or big box store. :) but no, I don’t have another one to recommend as I also used that one. Sorry.

[@CampfireRachael]

Just curious if there's been any paint thats rubbed off after 2 years?

[@OriginallyWorn]

A bit on the more used handles, but really overall not too bad.

[@localone1597]

Hi, great video. Just one question. Won't the door knobs be sticky after you paint them? Or does putting the clear primer on afterwards fix that? Thanks.

[@OriginallyWorn]

Hello! Thank you! The knobs are not sticky. If they are properly cured they will not be.

[@localone1597]

@@OriginallyWorn thank you

[@hanad1627]

I sprayed my draw handles. Nearly all seem to have dried ok, although they never dried great. However I am having major problems with 2. They are not screwing back in properly and when holding them even slightly tight they get finger prints and all smudged and a mess. I completely cleaned off all of the paint with acetone and then gave them a wash after. I sprayed them making sure the create the thinnest layer possible and left them to dry for 2 weeks but I am still having this problem with them. Why are these 2 handles so impossible?! 😭

[@OriginallyWorn]

Hello. I am sorry you are having trouble. I have no idea why you are having such problem withs. I have spray painted many things and haven’t had such issues. Did you follow all the steps? Use the same paint? Do you clean them really well, and clean the acetone off? And let each layer cure well. Maybe try bringing them inside with each sprayed layer to make sure they cure. I’m sorry I can’t be of better help.

[@hanad1627]

@@OriginallyWorn Yes they've all dried in well ventilated room and even in direct sunlight. I don't know what their problem is! No i used a different spray paint as we're in different countries. I just have no idea why these 2 handles hate being gold so much! 😭

[@OriginallyWorn]

@@hanad1627 I’m so sorry you are having trouble! That really does suck. I think you did what was right and started back over again. I hope this time they behave! ❤️

[@handyhands6773]

Hello my friend, great job. Question how is this holding up after a year any scatches? Do you need to go over it again. Please answer. Thanks.

[@OriginallyWorn]

Hello! The strike plates have scratches on them, the knobs have a few dings (but nothing major) and the hinges are still perfect. I would still do this again. :) hope that info helps you.

[@handyhands6773]

@@OriginallyWorn Yes this helps out. I'm up grading my hallway and looking to save money during the process. Door handles add up if brought. I'll see how this method turns out.

[@OriginallyWorn]

@@handyhands6773 that’s exactly why I did it. I can live with a few knocks for the savings of replacing everything.

[@philstricker]

How have the strike plates held up? I'm curious if paint would be rubbing off there especially.

[@OriginallyWorn]

Hey. They have worn off the most. The hinges are perfect. The strike plates have scratched quite a bit where it rugs and a few of the knobs have a few nicks.

[@llamacebu216]

@@OriginallyWorn take some 400 grit sandpaper and lightly go over the metal. Then primer. Sanding is the most important part to any paint project. It what makes the paint stick

[@davidreed192]

How have these held up over the last 2 years?

[@OriginallyWorn]

Pretty good! I would recommend It! A few got a few little knicks in the beginning but they haven’t budged in a long time.

[@sandradavidson4857]

how did they wear over time ?

[@OriginallyWorn]

They held up great for a long time. We did this years ago and have started replacing the knobs slowly as they wear but the hinges are still perfect.

[@carlaszczechowski5924]

Can you paint bathroom faucets in this same way?

[@OriginallyWorn]

Carla Szczechowski technically you can, not sure how long it would last.

[@maysiphanh]

Hi. I'm wondering how is this holding up? Do I not need to sand the handle?

[@OriginallyWorn]

Mine have held up great! A few nicks here and there on the handle but overall once they cured they are good to go. Sanding won’t hurt at all. I chose not to, but you certainly could!

[@willagrant7403]

How long is "curing for awhile"?

[@OriginallyWorn]

I would suggest 12- 24 hrs depending on temperature and humidity

[@fornello123]

It's been a few years, how is it holding up?

[@OriginallyWorn]

Pretty good! A few knicks and worn spots on the knobs. I would replace the strike plates if I were to do it again. Hinges are perfect. But definitely worth it to me.

[@veepee5434]

Thank you for this video. I am attempting this on some door handles now! The products list a curing time of 48hrs. Do you let each of the 3 cure for 48hrs? Or just 48hrs at the end?

[@OriginallyWorn]

I tried to let each layer cure at least 12 hrs... sometimes I did longer, sometimes not. The longer you can wait the better. I don’t remember what I said in the video, but I would follow that as they turned out good. Haha I break my own advise often.

[@kaylaperkins8309]

Did they were down at all I only used the spray paint on my garage nomb to test it out and it's all chipped off.

[@OriginallyWorn]

No. They look good. You need to clean them well and use primer. Sealer helps too.

[@kaylaperkins8309]

@@OriginallyWorn I was thinking if doing this same thing to my bathroom faucet, and tub faucet, how do u think it would hold up in a wet environment?

[@OriginallyWorn]

@@kaylaperkins8309 I don’t think it would hold up for really long. But you never know. I have heard of people have success for it for a year or so.

[@melaniem4365]

How have these held up over time?

[@OriginallyWorn]

Hello! The strike plates have scratches on them, the knobs have a few dings (but nothing major) and the hinges are still perfect. I would still do this again. :) hope that info helps you.

[@msjoy2005]

How’d it hold up?

[@OriginallyWorn]

Really good!

[@mihaithemystic2890]

those would look perfect golden like if were polished not painted lame black. it's more like rust-oleum commercial LOL.

[@marjannedescamps4453]

Would this work on an outdoor front door?

[@OriginallyWorn]

Marjanne Descamps technically yes, but there are a lot easier ways to paint a front door :)

[@andreahamblen8993]

How long did you let each coat cure?

[@OriginallyWorn]

Andrea Hamblen 12-24 hours if I could stand it 🤪 probably more like 8 though.

[@mjschradersmith]

How much $$$ were those 3 cans of spray paint?

[@OriginallyWorn]

Honestly I do not remember. Maybe $5 each, so $15.

[@nathanphillips5156]

2 years… how is it holding up?

[@OriginallyWorn]

I am very pleased. A few knobs has some Knicks but really great overall

[@cardsaremycanvas9065]

Great tips but why dint you use Annie’s. I am about to do mine and that is what I thought I would try. Would like to know your thoughts before I do that

[@OriginallyWorn]

Cards Are My Canvas hey! You could certainly use Annie Sloan products. I have many times for furniture hardware. I like to dabble in all the stuff without really good reasoning. But I also like how the spray paint seems to make a black “shell” on the knobs. Like you can’t tell they are painted. They look purchased black, new.

[@cardsaremycanvas9065]

Thanks for the quick response Rochelle! I think I will try the spray too! Fingers crossed it lasts!

[@OriginallyWorn]

Cards Are My Canvas I hope so too 🤪

[@boomdiddyah]

How is it holding up a year later?

[@OriginallyWorn]

They have held up great. A few knicks or wear here or there sure. The strike plates are the worst looking. The hinges are perfect.

[@davidderolph2845]

So, you used a black primer as the topcoat. In other words, you did not actually apply paint, you simply stopped after applying the primer. So, I'm wondering why you did not take another step and actually apply paint.

[@OriginallyWorn]

No. You must have misunderstood. The black is a rustoleum spray paint that does contain an element of primer in it. So if anything you could have skipped the white priming steps, but I think prep work is important, so I do both.

[@davidderolph2845]

@@OriginallyWorn OK, thanks for clarifying. I overlooked the fact that the black coating was a primer & paint product.

[@OriginallyWorn]

David DeRolph glad to help clarify :) hope you have a great day.

[@useyonina_]

Is it blog or vlog ?

[@OriginallyWorn]

It’s both. I have a blog and a KZbin channel.

[@useyonina_]

Like Barrio - Varrio 😄

[@Kooshad1]

3:08

[@tree3po]

TIP # ONE: Don't paint your door knobs, hinges, screws and such hardware.

[@bethh4271]

Why

[@tree3po]

@@bethh4271 why? cause you shouldn't paint over original materials like that. I just spent months stripping the paint off knobs and hinges from my new house (11 doors). Now I also have to figure out how to remove painted bricks around my fireplace. People are so dumb sometimes. You don't paint on metals or prick etc.etc. I mean, one can do anything one wants to do of course..... but it don't make right.

[@bethh4271]

I disagree. If you want orig cheap gold doorknobs that aren’t worth keeping and you want to strip them back to original status, go for it. Most might agree that painting them updates a Hime.

[@Kate-zc2jd]

How have these held up over time?

[@OriginallyWorn]

Pretty good. There are a few nicks on the knobs but everything else I did is still perfect.

[@alopezreo]

I was just thinking about that too. Do you know if she made a follow up video?

[@OriginallyWorn]

No video follow up, just the info in the comments. It would be a short video ;) few nicks but overall good. Might replace knobs if I were to do it again, but paint everything else still.

[@iiammyalashay919]

How did this hold up ?

[@OriginallyWorn]

Pretty good! The strike plates look the worse, the hinges are perfect and the door knobs are good for the most part.