I have been building plastic models now for 52 years I started when I was 10. I never had the confidence to paint small parts such as bolts on a 1/48. Watching all of your videos inspired me. I got a cheap fine point brush and just dived in. To my surprise I’m actually pretty good at it. I would have never tried unless I had watched all your great videos - OLD DOGS CAN LEARN NEW TRICKS. Thanks David keep making great videos and I’ll keep watching them.
@BrookieCooki847 жыл бұрын
Stunning work as always David! Any aircraft modeller that says he has never used his airbrush to make a prop spin is a liar.
@pouletbidule98314 жыл бұрын
I actually never tried
@lookout247 жыл бұрын
I've been watching your movies for a while now and as an former plastic model builder I must admit, your workshop is simply stunning. Your creativity and skills are very high and while there are very good plastic models out there, as well as very skilled modellers, you have it all - the knowledge, the feel of aesthetics, respect and love to history. Thank you for sharing your work!
@erikkunkle95742 жыл бұрын
The rust looked so real, I got tetnas watching you.
@SirRathalos7 жыл бұрын
wow, awesome! I've got to paint 4 of these on a 1/48 B-24 so this video helps a lot, but your pure talent still amazes me! Keep up the great work! Thanks
@idaemonplasmo7 жыл бұрын
Thanks and good luck. You will need a lot of patience :-D
@amuxpatch27986 жыл бұрын
you should be a watchmaker, the way you assembled and painted the Hellcat engine.
@jirimikel12527 жыл бұрын
Davide bomba jako vždy. Na každé tvoje video se moc těším.Vracím se k modelařině po skoro 25 letech a s úžasem sleduju,kam se to všechno posunulo. každopádně díky za inspiraci,to je studijního materiálu na celý život :-)
@way2sh0rt07grad5 жыл бұрын
I had the great pleasure to work on one of the real ones and test bench it. Clicked cause I’m building a 1/16 Camel and the Britannia casting is sub par so I’m looking at ideas to mask the seams and bring some life to it. Thanks!
@butlersmodellingpaintingan39747 жыл бұрын
Excellent, loved the bit with the engine starting as well.
@archiemcewen17237 жыл бұрын
Wow! When I see this I am blown away. So much detail!
@karenannew6 жыл бұрын
Love the finish - including sound effects. Thanks for the video.
@nigeljohnson80227 жыл бұрын
Resin engine looks fantastic and far more detail than the plastic version. Love the rust effects on the exhausts.
@paladinlv17 жыл бұрын
Great video! Thank you for posting! I really liked the engine startup.
@DaiElsan4 жыл бұрын
I needed to see this. I've got 4 to paint up for a 1/48 B17. I'm using OOB engine but know this can be made to look better than it comes. Thanks for the video.
@paulflorence37867 жыл бұрын
David, This video was very well done and extremely helpful. Thank you
@paulsawyer2326 Жыл бұрын
Incredible job on the detail, especially on the exhaust pipes. Nice job!
@bruceboatwright74886 жыл бұрын
Well done, again. I envy your steady hands, my hand/eye coordination isn't what it used to be, but you inspire me to try harder and be patient. Good music too! Bruce
@reconranger13707 жыл бұрын
Hey PLASMO: Just wanted to let you know that I really enjoy your build videos. I have picked up some good model building tips from them. Thank you very much for sharing your model building skills!
@STEAMBOLTANNIE5 жыл бұрын
I have bought the resin kit and extras for the boeing 17 g cant wait to do the painting...Thank You for this video..it helps lots...CHEERS
@duncanferguson68486 жыл бұрын
Superb work David, you make it look so easy.
@paulrobison31187 жыл бұрын
one word unbelievabie ILL watch anything you build.
@texasbasementbuilds45437 жыл бұрын
As always thanks for your time doing these little movies..I know how much time it takes..
@janbala71857 жыл бұрын
Love the Kerbal Space Program music :P
@fridaycaliforniaa2363 жыл бұрын
LMAO I'm not alone ^^
@aoates22496 жыл бұрын
Love your dedication - pure expertise and skill . thank you for your video :)
@cjcar637 жыл бұрын
Thank you David for this great video. I will be starting a new build soon, (Hasegawa 1/32 Mitsubishi Zero), and this will certainly help make for a more realistic finished model.
@smigoltime7 жыл бұрын
This should be considered as "most satisfying videos"
@Smootus7 жыл бұрын
Good job and thanks for detailed instructions on radial engine painting and weathering.
@cobrawingman7 жыл бұрын
pleasure to watch
@userequaltoNull5 жыл бұрын
Yeah, it's way more pleasurable than sand.
@russemerson48727 жыл бұрын
As with all your videos, that's just plain beautiful work.
@hellfox77777 жыл бұрын
No kamaráde ty si strašný frajer veru! Úplná dokonalosť ! Znova nemám slov... proste vždy onemiem keď pozerám ako to dokážeš dokonale vyšperkovať. Och kiež by moje modely vyzerali aspoň z polovice tak dobre ... čo z polovice aj z osminy by mi to stačilo :D Fakt krásna práca! Neskutočne super!
@idaemonplasmo7 жыл бұрын
Wow moc díky. Stačí dodržet postup a určitě to zvládneš ještě lépe.
@rocko112camaro7 жыл бұрын
Great informative video. To get chipping effect for bare metal (silver). I have been using a Sharpie - permanent marker - Silver metallic. You can make nice paint chipping effect. Also if you make a mistake you can use thinner to fix/clean the area. The Sharpie metallic marker (brass, gold, copper, silver) are very handy and easy to use for metal effects. Just sharing information since you do a lot of sharing your work.
@idaemonplasmo7 жыл бұрын
Thanks, I will try it.
@anthonywendt58347 жыл бұрын
Great stuff. Appreciate you showing us how you do your craft.
@FreakazoidakaBen7 жыл бұрын
Very nice video with great technique. You are an inspiration. Greetings Ben.
@orcasea597 жыл бұрын
Beautiful work! The only think I could possibly suggest is that the intake pipes from the supercharger might have been slightly discolored from heat, but most likely a blueish discoloration, whereas the exhaust pipes would have definitely had rust. Also (I once worked overhauling radial engines, specifically the ignition systems) the high-tension spark leads from the magnetos are a heavy, grease-resistant black rubber. Other then that, awesome work!!
@idaemonplasmo7 жыл бұрын
That will be good for my next models. Thanks for the info.
@EBS656 жыл бұрын
Great work. I always have trouble working with photo etched parts and this is fantastic
@janhansen37536 жыл бұрын
Omg. Was boring at start (My first time here). But like a good book it got more and more exiting. And what a result, amazing job :)
@CH4NNELZERO7 жыл бұрын
Just amazing. Such skill; it's truly a pleasure to watch. Thank you very much for inspiring me and (this might sound cheesy ..) giving me hope in the human spirit.
@davidmcmanamy13867 жыл бұрын
Another amazing job my friend, and I believe this guide is great for all modelers everywhere. Keep up the great work. PS Are we going to get to see the plane that this engine is going in? :-)
@idaemonplasmo7 жыл бұрын
Thanks. The engine is from f6f hellcat and sometimes I will build it.
@martinluerssen94874 жыл бұрын
Very nicely done and a an inspiration!
@mcastesoft7 жыл бұрын
You are a genius!! I love to learn with your techniques!!! Thanks!!
@duggiebader17987 жыл бұрын
mind blowing. thanks for sharing your skills.
@DEVASTATOR4786 жыл бұрын
little masterpiece
@matetochips79277 жыл бұрын
i love ur videos and i think u are a great model builder. I admire that u have so many subs just for a model building chanel. The only thing is i don't understand a thing u say to be honest
@richelias29734 жыл бұрын
Always excellent
@toequantumspace7 жыл бұрын
Thanks - very nice build. Absolutely top notch.
@jamesmcgowen17695 жыл бұрын
Thank you! Very informative and very entertaining! 😂 great soundtrack also. Very well done.
@michaelmontefusco8967 жыл бұрын
Nice tutorial! The only info I would like to pass on is that exhaust systems don't normally rust that heavily on active aircraft. Thye are normally pretty well preserved with oil and such.
@Christospap7 жыл бұрын
Great work David! Best wishes.
@busabkickinbutt7 жыл бұрын
Fantastic! Love all your videos!
@idaemonplasmo7 жыл бұрын
Thanks.
@richardlechinois82367 жыл бұрын
wow wow wow 100/100 you are incredebille tanks for you amazine works from a friend from quebec canada.
@MrKrc20027 жыл бұрын
David, Outstanding Video.
@boomerhgt7 жыл бұрын
Wow amazing work you are a model master love your videos
@juliohernandez68567 жыл бұрын
fantastic! I love watching your videos. Great learning tool.
@sjoerdn30767 жыл бұрын
Very impressive!
@ecosurfshop4 жыл бұрын
Another great video - thanks again
@ijsbrandvr7 жыл бұрын
before I forget. your video's are great!!! and help me very much!
@g.oliverburnssr.81157 жыл бұрын
Superb Tutorial
@EduardoMartinez-dm5pp7 жыл бұрын
i just love watching your videos men!!! you do some heavens work here
@MightyCrazy7 жыл бұрын
Awesome work! Thanks David!
@james199129106 жыл бұрын
This guy is good at it.
@pedroalbicastrense3534 жыл бұрын
Very helpful for me thanks
@stefan-mihaitoma947 жыл бұрын
im very sure that you are a painter, you acuracy is amazing
@claudiopalaciocampo62587 жыл бұрын
Very nice tutorial video pal! Really enjoyed it a lot
@CaptRed-tx8br7 жыл бұрын
Beautiful work!
@JohnSmith-yb6sd6 жыл бұрын
Very good video and instruction
@gryf85317 жыл бұрын
Very nice.Thanks for this tutorial cause i have the tamiya 1/32 f4u-1a corsair.I think this can help me for make a more realistic engine.
@yycflyguy7897 жыл бұрын
Another great video!👍🏼
@phayzyre10527 жыл бұрын
Beautiful!!!
@sunrisesurfbum6 жыл бұрын
Really nice but a lot more to it here than anyone thinks!
@aarongaponoff94894 жыл бұрын
Great work!
@jackpreston8762 Жыл бұрын
David, thank you..
@DrengrWolf6 жыл бұрын
Very clean start! sounds beautiful! :P
@captainyamato42527 жыл бұрын
Great video you got me wanting to build a model spitfire
@kevinhedrich60267 жыл бұрын
Love your videos!
@TheKillerjohny7 жыл бұрын
Krásná práce.
@alejandrosienra21794 жыл бұрын
Excellent moi!!🌠🛩️
@StonyRC7 жыл бұрын
Beautiful job.
@lewistaylor19652 жыл бұрын
I'd like to see how you did the prop...Very realistic!...Thanks for the vid...
@lynxostrovid75226 жыл бұрын
Pěkná práce...
@TheModelGuy5 жыл бұрын
Pretty sure if you add fuel that thing will run. Amazing work
@kurk1701a7 жыл бұрын
stellar craftsmanship bravo!!!!!.
@mauserbear91586 жыл бұрын
Those engine noises fooled my stoned ass for a moment there!! hahaha great vid man
@mileskessler66346 жыл бұрын
I’ve never thought of using my airbrush to start up a prop, but I have used fans.
@Tenderification7 жыл бұрын
Great to see this !
@aiperlink7 жыл бұрын
Always great video a david. Thanks.
@RoosterG33rs7 жыл бұрын
Fantastic
@328Watcher7 жыл бұрын
As always a great video. I must admit that I find that PE wiring looms are too two dimensional so I always end up replacing them with wire.
@Marius_CN2 жыл бұрын
Bonjour très bonne vidéo merci
@chiripitio7 жыл бұрын
Excelente vídeo amigo , Ud es el mejor !!!!
@stevenchadbone5526 жыл бұрын
Nice work as always, and it even starts 1st try. :-)
@randypurtteman11835 жыл бұрын
Fantastic . How did you ever get the wear on the blade to look so realistic?!!