I'd be proud to have a set of wheels painted that good on my car.
@aintmybabyfour4 жыл бұрын
Just a little suggestion to everybody, I would take the center cap off then paint them separately. When whoever goes to balance the wheels, they might peel the paint up when taking the center cap off.
@TENNESSEETRACKHAWK5 жыл бұрын
Nice to see someone demonstrating the REAL and most PROFESSIONAL way of painting ur rims. Great video bro! Gonna paint mine that exact same way thanx 👍 subbed....
@PHARRAWAY5 жыл бұрын
Thanks brother
@craigglossop45954 жыл бұрын
The most professional way would be to take the tyres off the rims
@goatpier75702 жыл бұрын
@@craigglossop4595 and have it in a fully dust proof room. You can do this by a special film you tape around you walls and air purifier
@dmalott09084 жыл бұрын
I've watched so many of your videos on painting but have never painted anything until now. I painted the inside of my nephews rims on his mini cooper last night using your guidelines and they turned out so amazing!!! Painting the front of them tomorrow and hoping for the same results. Love the videos and the fact that you're sharing your skills and knowledge for those of us who want to do this, but are a little timid to "pull the trigger." Been subbed for a while, finally putting some of your knowledge to use.
@accuratein044 жыл бұрын
Woke up this morning and decided I want to properly paint my wheels so I came here to learn. Thanks for your video!
@chasinggreatness424 жыл бұрын
After watching your video I'm excited and can't wait to get started on my rims tomorrow. I'm going to follow your exact steps.
@MrProxl5 жыл бұрын
Love your work. Here is a tip that may help in the future. I let about 25% of the air out of the tire making the tire drop below the rim. You can push the tire down and its much easier taping the wheel/tire that way. The tape can get way under the rim. Paint the rim and simply re-inflate the tire. Keep up the great videos.
@PHARRAWAY5 жыл бұрын
Yup that is a good tip I did let the air out completely forgot to mention that on the video oop's
@iwerkalone4 жыл бұрын
Thank GOD a video without CRAP music playing in the background. THANK you for posting, great video, WAY better than the others here on YT.
@PHARRAWAY4 жыл бұрын
anytime brother
@camsac3 жыл бұрын
I like how you made sure that the tabs on the rim protector were all in the same place near the tire valve
@tcreed11435 жыл бұрын
Great job, I did the same to my rims looks way better then before n I saved a lot money also. 👍
@PHARRAWAY5 жыл бұрын
Nice yes they do come out better
@jamlee3444 жыл бұрын
That Finish is like glass! Nice work 👌
@reytinoco50194 жыл бұрын
Looks very good, thanks for taking the time to do videos for the "new" people trying to do something like this.
@PHARRAWAY4 жыл бұрын
No problem 👍
@JuanMejia-lc7he4 жыл бұрын
I love this vid I watch it all the time lol with my full-time job I don't get to paint much so honestly watching these vids keep me inspired
@ManBolo54327 ай бұрын
That is classic admission there…..the things I nerd out on inexplicably
@douglasgreen4375 ай бұрын
They look incredible..
@HelenDriggers-lm2cj5 жыл бұрын
Thanks for sharing this with me from one fellow human being to another fellow human being great job on the painting job
@PHARRAWAY5 жыл бұрын
Thank You brother
@frankiebpr5 жыл бұрын
Your work is outstanding. Wish you were in Puerto Rico. Frank
@PHARRAWAY5 жыл бұрын
Thank You brother
@beyerch4 жыл бұрын
I bought a set of winter rims that are a bit gnarly looking and was considering some DIY painting to make them better. (I don't need show quality by any means....) Some questions from this video: - Any thoughts on using an electric turbine HVLP gun? Seems like this project is small enough that it should work? If not, what would you recommend for a non-professional on a budget? - For wheel prep, assume you are not going down to bare metal, just getting through factor clear / scuffing up paint a bit so that next adheres properly? - Are you using primer? - Any guidance on the brand / type of paint to use? Also, any thinning / modification? - For clearcoat, any specific recommendations due to exposure to elements / harsher cleaning chemicals rims get exposed to? - How much time are you typically leaving between coast of paint / clear / etc? - If someone has minor knicks / gouges in a rim any thoughts on how to fill that in? I believe there are some products for this purpose, though curious if any are better than others? Thanks!
@PHARRAWAY4 жыл бұрын
Hi, brother, you can get a husky paint gun from home depot they work good and about the paint here is a site that is on budget and will do good shop.thecoatingstore.com/Metallic-Paint_c48.htm just get yourself a quart they sale them in qt. kits with clear and all the reducers you need
@Mxyzptlk-kk2pg5 жыл бұрын
I'm new to this, what kind of paint and gloss did you use. Can you be specific in name and brand. What kind of paint gun are you using? Can you put that info in the description of all the materials used?
@kevinshea47764 жыл бұрын
Great job! Maybe look into a used tire machine to dismount the tire to cut back on the time it took to mask the tire from the paint target as the masking you showed looked brutal!
@Vladesco9115 жыл бұрын
Great video and great work. I wish the guy that I will give him my wheels of my Jeep SRT 2019 to paint does exactly the same as you. Keep up the good work!
@Vladesco9115 жыл бұрын
I just did not understand why you used different pressures for the paint and clear... Is there a particular reason for that?
@PHARRAWAY5 жыл бұрын
@@Vladesco911 Yes the clear flows out better and smoother with higher pressure
@BigG616sts3 жыл бұрын
Bro u make that look so easy, painting rims isn't as easy as it looks coz of all the tight curves and the wheel nut holes, so easy to get a run if ur not careful
@PHARRAWAY3 жыл бұрын
Thanks 👍
@paintbydenn4 жыл бұрын
Looking good 👌🏼 The paintjob came out very nice 👍🏼
@HAMEED...5 жыл бұрын
Nice job .Waiting for your upcoming videos .
@PHARRAWAY5 жыл бұрын
Thanks It's coming up
@CVM222VOLT4 жыл бұрын
Thanks for taking the time to video this and explaining the process.
@giovannogalindo87855 жыл бұрын
my man you got down! appreciate you spreading the knowledge & happy new year
@PHARRAWAY5 жыл бұрын
Thank You brother Happy New Year
@antoniowade33182 жыл бұрын
Nice work bro, that's an awesome job you did, Wade Out.
@gedionsamuel22562 жыл бұрын
Impeccable
@Marcanthony_3105 жыл бұрын
Dam clean as hell
@jonathangomez31865 жыл бұрын
Amazing job man just had a near collision with a moron and scrapped my rim bad so this will give me a idea what ima need to get to fix it myself if possible lmk if this is the same method they use to paint cars aswell thanks for the video man
@PHARRAWAY5 жыл бұрын
yes brother I got videos showing how
@fordawin78114 жыл бұрын
The prep was more impressive than the finished product.
@carlossweden49745 жыл бұрын
Hi BOSS, that turned out very nice, good work man. And the way you mask the wheel is very Good way/tips..see you on next video BOSS
@PHARRAWAY5 жыл бұрын
Thank You brother
@Duncv83 жыл бұрын
Amazing gloss.
@jamie.7775 жыл бұрын
Awesome work! JUST A WONDERFULLY, AFFORDABLE WAY TO GET BAD ASS RIMS FROM YOUR BORING STOCKS
@julioramirez23996 ай бұрын
Long shot but what gun would you recomendable for beginners? Fixing my wheels at the moment and would like to paint with a gun rather than cans.
@PHARRAWAY6 ай бұрын
The NO NAME Z Gun from spraygunner
@TheSootpig5 жыл бұрын
great video. a pack of playing cards is good for masking the tyres
@PHARRAWAY5 жыл бұрын
Nice tip brother
@ZacCjw5 жыл бұрын
Or even 5x7 index cards 👍🏼
@edvinlopez94202 жыл бұрын
Dam 😍😍 them wheels
@youngone6974 жыл бұрын
That was a very professional done. Love the colors brother❤🙌
@AutOdometer3 жыл бұрын
I really like your tape and cover method
@PHARRAWAY3 жыл бұрын
Thank you
@habibtil55444 жыл бұрын
Awesome
@thelizardking85253 жыл бұрын
Like a boss!!! Looks good!
@omartalavera69745 жыл бұрын
You should cut up all the pieces of tape ahead of time so it not sitting their ripping them individually everytime over n over
@arnoldchapa78235 жыл бұрын
They look fresh af!!!
@PHARRAWAY5 жыл бұрын
Thanks brother
@hamirudinhalipah79433 жыл бұрын
Nice job..i from malaysia
@jorgevasquez-lz4be4 жыл бұрын
YOU ARE A REAL PROFESSIONAL!!!!!!!!!! did you mix the black color with clear coat ? the best video you are a master
@PHARRAWAY4 жыл бұрын
No added the Black color first and then applied the clear
@jorgevasquez-lz4be4 жыл бұрын
THANKKKKK YOUU I am subscribed in your channel and i will keep looking your amazing videos
@PHARRAWAY4 жыл бұрын
@@jorgevasquez-lz4be Thank you and God Bless
@jamesm97665 жыл бұрын
Patients and time good job bro 👍🏻
@PHARRAWAY5 жыл бұрын
Thanks brother
@TylerLove5 жыл бұрын
Love the video. Thanks for the constant good uploads!
@PHARRAWAY5 жыл бұрын
Thank You brother Happy New Year
@lchuckg50003 жыл бұрын
Good video 📹 👍
@cecilsarfraz84774 жыл бұрын
Very nice job bro just wondering which brand and ratio of the mixture are you using?
@varunchhabra63165 жыл бұрын
What is this red tube over tyres?
@PHARRAWAY5 жыл бұрын
It's just a decorating decal
@SprayWayCustoms5 жыл бұрын
Very nice...just painted my rims also
@PHARRAWAY5 жыл бұрын
Thank you brother
@tomsti4 жыл бұрын
I've been looking for a wheel painting video that used a paint gun and not rattle can. What gun tips did you use and paint system? Did you clear the back side of the wheel the day before? Looks great!!!
@PHARRAWAY4 жыл бұрын
about the gun tip, it was a 1.3 tip and the paint system it was Urekem paint and yes I did paint the inside a day before
@kimfrank76585 жыл бұрын
Nice job, going to do that to my rims.
@PHARRAWAY5 жыл бұрын
nice brother
@GeekyJay79 Жыл бұрын
Not gonna wet sand and buff a little at all? Amazing
@slowmojoe695 жыл бұрын
Love the paint job, I would pay you to do mine
@PHARRAWAY5 жыл бұрын
Thank You brother
@drmikeyb12 жыл бұрын
How long in between coats. Did you have have to retape the inner drum? Due to overspay from the top.
@PHARRAWAY2 жыл бұрын
10min
@mauricechappell83074 жыл бұрын
Good good job!
@TitoSchammy2 ай бұрын
Why didn’t you have to prime it? I’m seeing different responses on when and when not to.
@PHARRAWAY2 ай бұрын
@@TitoSchammy it's best to apply primer
@javiertorres49213 жыл бұрын
Me encantan tus trabajos siempre te sigo bro
@PHARRAWAY3 жыл бұрын
Gracias amigo
@aussieone39883 жыл бұрын
great video i did them before didnt use undercoat bugger do it again this week
@meglo6125 жыл бұрын
aye, holmes, first off a great job on those rims!!!!!! what kind of paint did you use? and where can I get it.... I'm trying to paint mines as well!
@hugomanai64524 жыл бұрын
Before painting your rims you sanded them with 320 grid. But the pad you used to scuff it down, what was that?
@PHARRAWAY4 жыл бұрын
it's a red scotch brit
@hugomanai64524 жыл бұрын
@@PHARRAWAY Thanks!
@IPLAET75 жыл бұрын
Nice tutorial
@PHARRAWAY5 жыл бұрын
Thank You brother
@dnrm14 жыл бұрын
Great job!!!!
@23MBeezy4 жыл бұрын
Wow! I have a black on black 2011 lexus gs350 and I wanna paint the wheels myself to save the cash but I'm contemplating on getting them powder coated for about $280 or do it this way myself...decisions decisions 🤔
@JustAGuy7814 жыл бұрын
The paint will be easier to touch up if it ever gets blemished whereas the powder coat is not so easy to just "touch up". I have all my own powder coating equipment and an oven, but painting them will yield identical results and the ease of repairing later is far better with painting them.
@23MBeezy4 жыл бұрын
@@JustAGuy781 you're the man!! Now would you recommend I paint them with these products in the video or other?
@jakubjozwiakowski77352 жыл бұрын
@PHARRAWAY how much base coat did You use to cover all 4 wheels?
@PHARRAWAY2 жыл бұрын
1qt of paint
@sscmodz26494 жыл бұрын
How much base and clear did you need?
@PHARRAWAY4 жыл бұрын
1quart of each
@amritpalbharajvideoproduction4 жыл бұрын
PHARRAWAY 1 quart for 4 rims? I have 16 of my own rims to paint
@amritpalbharajvideoproduction4 жыл бұрын
PHARRAWAY what’s your ratio for this job sir?
@nearheaven53115 жыл бұрын
Excellent!!!
@PHARRAWAY5 жыл бұрын
Thank You brother
@davenevarez47385 жыл бұрын
Awesome.
@PHARRAWAY5 жыл бұрын
Thank You brother
@aaronkelsey30712 жыл бұрын
So you can powder coat and let them sit to dry. I thought you had to like bake them that’s been the only thing stopping me doing mine
@PHARRAWAY2 жыл бұрын
It's not powder coat brother I painted them
@mikkowade45725 жыл бұрын
hi! hope u see this. i have new bmw rims in grey, i want to make them black. can i just use primer then after that black paint? no need to use sand paper because theyre smooth already? or should i use the sand paper to remove the grey paint? please reply asap. thanks in advancep
@PHARRAWAY5 жыл бұрын
You need to sand it with at list 320 or 400 so that the paint will stay
@mikkowade45725 жыл бұрын
thanks man appreciate that! 🙏🏼
@bigjoeisabeast37012 жыл бұрын
you should leave them to fully cure before putting rim protectors on.
@benrobledo9979 Жыл бұрын
Didn't watch the primer stage , what king of adhesive primer did you use?
@x-man50565 жыл бұрын
Very nice job. Looks great.
@PHARRAWAY5 жыл бұрын
Thank You brother
@roberthamilton23343 жыл бұрын
Great paint job on your wheels and mirrors, what is your compressor size and type of spray gun?
@PHARRAWAY3 жыл бұрын
the compressor is a 60gal
@stevengonyaw1617 Жыл бұрын
If you're good with a paint brush, you don't need to tape anything
@BlackHornetTactical Жыл бұрын
Do you prime the rims before? Or just go straight to painting?
@PHARRAWAY Жыл бұрын
Some times depending if it has body work
@michaellowery89372 ай бұрын
What kind of black paint did you use? You should provide, it helps. Or at least helps me. Either way great job
I’m assuming the weights clip directly onto the red plastic trim without a problem?
@PHARRAWAY4 жыл бұрын
No i use stick on weights
@tracycolorado5 жыл бұрын
nice job
@PHARRAWAY5 жыл бұрын
Thank You brother
@RawPunjabipodcast4 жыл бұрын
What type of black colour did you use bro? There are few different types of black in my local store
@husky12324 жыл бұрын
Hello pharraway I am looking back how you sprayed these wheels as I am starting tomorrow my ? Is dose the inside of the wheels. how money coats base and clear did you use and also is it a matter of choice if you wish to spray inside of wheels?
@LuisHernandez-de2nk4 жыл бұрын
Thanks alot for the help man! New to paint and this video helped alot before spraying a wheel set👍🏼
@PHARRAWAY4 жыл бұрын
Glad it helped
@wcmauldin813 жыл бұрын
So you don’t have to mask anything on the barrel since that was already painted correct?
@PHARRAWAY3 жыл бұрын
Yes that is correct
@proudcanuck4 жыл бұрын
What's your paint setup. I'm interested in learning a little more about painting that way? What spray gun is that? Is it easier painting that way then spray cans? Worth it to purchase that setup?
@sumerig44234 жыл бұрын
Beautiful
@PHARRAWAY4 жыл бұрын
Thank you! Cheers!
@waynejohnson33883 жыл бұрын
How long did you wait in between coats of paint? I’m getting ready to paint the pro comp rims the same color as the body (Desert Gobi) as my 2017 Jeep JK 2 door. Currently the rims are black and have 37x12.50x17 Firestone destination MT2’s on them.
@PHARRAWAY3 жыл бұрын
It's 15min between coats also for clear
@mh22885 жыл бұрын
Very nice man! 👍 What kind of paint did you use? Oil based?
@duncangregho19863 жыл бұрын
hello, whats the best way to paint chrome wheels to bkack color? so the paint last longer , thanks!
@PHARRAWAY3 жыл бұрын
same way brother the only difference is that you add adhesion promoter first
@duncangregho19863 жыл бұрын
@@PHARRAWAY oh ok thank you!
@lg20814 жыл бұрын
They look nice, but why didn't you prime them before paint? Is it not necessary like on the body of the car?
@PHARRAWAY4 жыл бұрын
kzbin.info/www/bejne/gl6vk5Sijdt3b7s
@lg20814 жыл бұрын
Ok, I thought that the rims were polished aluminum. What size of tip did you use to spray; I have a 1.4mm tip, can I use that one or should I buy a different size?
@PHARRAWAY4 жыл бұрын
@@lg2081 the 1.4 will be good
@lg20814 жыл бұрын
Cool bro thanks.
@TheDNM774 жыл бұрын
What kind of hvlp tip do you have on that gun. 1.3 or 1.5 ?
@PHARRAWAY4 жыл бұрын
It's a 1.3
@TheDNM774 жыл бұрын
Thanks
@yahirgarcia50344 жыл бұрын
What would be some more affordable choices for a good paint gun that could pull this job off ?
@adriannavarro54324 жыл бұрын
How much would a job like this run? I don’t want to get ripped off taking them for Someone to paint. Thank you.
@PHARRAWAY4 жыл бұрын
you can email me at pharrawaypaint@gmail.com
@mikekruger96423 жыл бұрын
FINE IDEA & GREAT LOOK !!!!!!!!LOOK OUT MIATA WHEELS !!!!!!!ZOOM ZOOM !
@PHARRAWAY3 жыл бұрын
Right on!
@Yves1443 жыл бұрын
why didn't you use a primer on the mags?
@PHARRAWAY3 жыл бұрын
you don't need primer brother
@abanoubarmanious13592 жыл бұрын
Hey sorry man I know this video is old but I hope you can help me clear up some confusion. 1. Do I need to prime the wheels if they are alloy wheels? If so, do I need primer and sealer or just primer? 2. What kind of paint gun are you using in this video? And what paint gun do you recommend when priming? If you can drop your cashapp below I’ll gladly tip you for the help! Thanks man
@PHARRAWAY2 жыл бұрын
You can just use sealer just add some adhesion promoter first
@abanoubarmanious13592 жыл бұрын
@@PHARRAWAY Thanks for the reply! What good budget friendly gun do you recommend for applying the sealer? Or can I just use spray paint cans?
@alexthepainter40355 жыл бұрын
Awesome!! The only thing I hate when I am doing rims is the taping.. Do you do this full time?
@PHARRAWAY5 жыл бұрын
No just on my spare time
@alexthepainter40355 жыл бұрын
@@PHARRAWAY I work in a Body shop.. I do alot of side work. I am a painter and bodywork. Over here in Boston is winter I stop until the summer..
@PHARRAWAY5 жыл бұрын
@@alexthepainter4035 Nice
@mikegoyette84692 жыл бұрын
Nice job on the wheels! What type of paint did you use for this?
@PHARRAWAY2 жыл бұрын
Automotive paint
@CameronFry-tl9dr5 ай бұрын
Hay guys I'm getting into refurbishing alloy and looking for knowledge would you call it but I've got a question when it come to spraying with a hvlp gun what do you do with the inside of the alloy that sits against the disc do u leave it or do it and what doe you do with the front with the weights on the inside with the tyre on the rim or doe you doe the face of the alloy kind regards Cameron
@franciscojaimes95834 жыл бұрын
Why does clear have higher psi than the paint? Non painter asking lol
@PHARRAWAY4 жыл бұрын
The clear is much thicker then the paint so at that psi it will lay down much smoother
@khouan75 жыл бұрын
Looks good! Just hit he subscribe button. The only thing I would’ve done differently is brake the bead in the front side. But the job looks good.