How To Spray Paint Your Wheels the Right Way (ONLY $25!)

[@KevG]

FAQ: Q:How’s it lasted? A:Here’s my 90 day update: kzbin.info/www/bejne/Y4TIkoxjo7OKa5o Q:Does this work on aluminum wheels? A:Yes, BUT swap out the paint. Dupli-Color has a paint that bonds better with aluminum. Any more questions, please leave a comment. And do your research please

[@llnorthwindll]

Your 90 day update is the same URL as this video... just a heads up.

[@KevG]

Fixed thanks

[@TheoFennel]

How many of the gloss paint would you say to get, x2 or x3?

[@aydentorres5646]

@@TheoFennel how many did you end up needing for 4 rims?

[@jdjd9534]

J

[@lowes1388]

We’re gonna need those samples back big dawg

[@KevG]

Lmaooo 😂

[@thehomedepot3006]

@@KevG you’re more than welcome to come take as many sample cards as you’d like , we beat and match all competitors prices as well 😉

[@lowes1388]

@@thehomedepot3006 pull up

[@KevG]

@@lowes1388 do I need to hire a lawyer or not

[@lowes1388]

@@KevG , since we’re not paying you for advertising at the moment , well let this one slide 😉 ...... we beefed up security in the paint section . Cheers

[@ikxndal5709]

In the middle of doing this, bought everything you got and prepped my wheels. Did all the layers now just waiting the hour (UPDATE) They look amazing, saved me so much money!

[@Steven-uv8lc]

Did you prime them?

[@ProstheticToes]

yo how've they kept up

[@SLEV7NELEV11N]

For those that can’t take off the wheel. DO NOT GET PAINT ON YOUR BRAKE DISC OR BRAKE BLOCK. what I’ve done, grab a bunch of trash bags, scrunch them up and place them between the wheel and brake disc. And instead of using the color cards he uses to separate the rim from tire, I use scotch tape, can even use an ID card to wedge the scotch tape in.

[@CameronDC-Grimes]

I'd argue if they can't take off a wheel they shouldn't paint. It's very dangerous to get paint on rotors, calipers, slide pins, wheel hub bearings ect... Just jacking up the car from Δ points which is on frame after lower control arms and wheel wheels near center of vehicle. Put jack stands under axles taking care not to hit brake lines with jacks. Use a breaker bar or impact wrench to remove lug nuts and then wheel, put wheel under vehicle frame near Axle where skid plate is. When you put wheels back on only snug the lug nuts while it's lifted off ground, drop vehicle weight on tire then tighten lug nuts in a star pattern to torque spec with torque wrench! Usually between 80-100 Ft-Lbs

[@rcrhinehart66]

Whoops, I wish I had read this before I finished painting my rims today. My old cop car has mostly solid steel wheels with the little holes around the center so I am pretty sure no paint touched the brakes. I'll take a good look tomorrow. This advice of yours should be pinned at the TOP ^ TOP ^ TOP ^

[@andycomella1726]

I would love to do this but I can't take my wheels off I'm disabled.

[@samdavis-zh3cv]

What if he did it already what might happen??🙁

[@NoobieLandCity]

@@samdavis-zh3cv It's the part made to stop your vehicle when you press your brake, it doesn't have the same friction like it used too, you'll have to press harder to brake because it'll slide like if you put wax on it, on small road you'll "probably" be fine but when you get to an highway you might get surprise and potentially crash your car.

[@griffinsteel8908]

My mannnnn you just saved me 1000

[@KevG]

Love to hear it. DIY life

[@loliverde9955]

Same lol

[@VISlXVI]

Facts

[@ryanmarshall3324]

@@KevG do these types of rims and paint chip if a light wash is used on your car or any sort of scrubbing or power washing? Just wondering!

[@deletedaccount6663]

@@ryanmarshall3324 get professional spray paint if you want it to last

[@recardothompson3798]

I did this on the rims of my crv and i didnt have to alter it in any way till nearly two years. for a cheap fix like this its totally worth it, if you like doing things yourself

[@qtepiee88]

I’m literally watching this video wanting to do the same thing to my 2018 Honda CRV. Of course as a woman I don’t have the ability to take my wheels off. Any recommendations if you want to spray the rims while still on the car?

[@ChicagoNicky]

@@qtepiee88 Hey I'm I lady too asking the same question I happened to find a video for us If you haven't found one already 😀 kzbin.info/www/bejne/nYrXhIutia2UiqM Hope this helps!

[@DistanceCinematics]

@@qtepiee88 probably best not to, paint tends to overspray. Especially when wind is involved and if your car is a vibrant colour and you use black paint. It’ll spray over your cars paint and unless you buy a cover for your car, it’s probably best not to try it. (even just old / unused rags/ towels) I highly suggest to take your wheels off and lay them flat so the paint also doesn’t drip. You should only have to take 4-5 bolts off. Most cars if not all should have a lug wrench in the boot for it

[@matchfoe1130]

@@qtepiee88 just did mine yesterday get a bunch of bags and painters tape nd tape around the rim and bags on the tire and put the plastic bags around the break disc (make sure there cooled off) nd just go light around the rim nd wait about 3mins in between sprays to avoid crazy over spray

[@aaronjames8547]

@@qtepiee88 you can take the rims off why even limit yourself

[@jimneese9335]

Just painted my 1982 Porsche 924 wheels using this method. The results were amazing. Great video.

[@KevG]

Awesome to hear! Thanks so much

[@Lord_Sunday123]

Idk if anyone else noticed, but the final product had a little bit of a gritty finish. There are a couple ways to minimize that. Don't do one light coat then two heavy coats. Maybe try more for like five light coats. Also, once your last coat of paint dries, you can lightly sand with high grit sandpaper (800 to 1000) then wipe down. Then do a few light coats of clear.

[@ScratchyBaws]

Agree, the finish was not as good as he kept boasting about which kind of defeats the object of the title.

[@LORDSLADE]

Can I still do this after I applied clear coat ? And then reapply ? I just noticed that gritty look after finishing

[@agamadden123]

Orange peel who cares as long as a owner happy we are happy dope

[@kodeman3515]

I like to wet sand between coats.

[@MrBigBoy4Life]

I’ll just buy the rims already professionally painted.

[@unnamed7570]

It completely depends on what colour you're doing but i would highly recommend doing the inner wheel barrel. It adds alot to the final finish.

[@Krono3ditz]

I just did this over the weekend and I can say that I am very pleased with the results. I really appreciate the help from your video as it saved me 100s of dollars

[@KevG]

Love to hear that!!!

[@harrissyed4876]

How are they looking now?

[@Krono3ditz]

@@harrissyed4876 they look a little less glossy but that’s to be expected because of weather and dirt and stuff, but I make sure to clean them once every week and a half or so. But overall they still look really nice for 25$ worth of paint

[@onyayekekay5357]

@@Krono3ditz just wandering how they look 4 months later

[@Krono3ditz]

@@onyayekekay5357 they are still looking good and there is no sign of the paint coming off anytime soon. Like I said two months ago they look a bit less glossy compared to when I first painted them because of that car being my daily driver, but other than that I am very pleased with how this turned out and I have no regrets with this whatsoever.

[@mcjrocker]

Stripped my plastidip and painted my wheels with this and it looks amazing!! Thanks!! 👏👏👏👏

[@KevG]

Heck yeah! Glad to hear

[@gabrielolivo1116]

Dude I just finished doing it to my car following every step and it looks completely amazing, thank you. Like well deserved

[@KevG]

Thank you! Love to hear that

[@jimmyramos744]

How long does it last

[@jnoel7166]

BROOOOO YOU SAVED ME SO MUCH MONEY GOD BLESS YOU FRFR😂🙌🏾 CAME OUT BETTER THAN I EXPECTED AND I GOT 2 people who want me to do theirs! I’m stoked man thanks again!

[@KevG]

🤘🏼🤘🏼🤘🏼🤘🏼

[@NNWarrior]

I just scratched my 20s on the curb just now and this is the first video I saw. I guess I know what I’ll be doing this weekend.

[@karterandreason4504]

Just wanted to comment and say that I did this about 7 months ago and it still looks new! Take your time on it, don’t be afraid to use the paint. The more black you put, the more shine that’ll come. Also, go ham with that crystal clear enamel - makes a world of difference when dirt and nasty things gets on it.

[@AlienCreatureThing]

How did it hold up?

[@gxbefuentes]

?

[@N55Behrens]

Is it still looking like new?

[@1chica4u]

My brother used deck of cards to put around and he used a leaf blower for the dust that set in area , but great job! Looks awesome!

[@kevinquinn5339]

Found me a project for this weekend

[@paulhughes3961]

They came out very nice. I have to correct you on one thing when a paint says enamel it does not have anything to do with it being oil base or latex as both have enamel finish or hardness. Also you might give Dupli-color a try as it is an epoxy paint and has excellent bonding characteristics.

[@iimbig3544]

what do you recommend for alloy rims?

[@davper8619]

what do you recommend for allow wheels?

[@acidspaz4252]

@@iimbig3544 primer before paint. 2 part clear

[@Febreeze_Odor_Eliminator]

⁠@@acidspaz4252 wdym by primer and 2 part clear? Thanks!

[@acidspaz4252]

@@Febreeze_Odor_Eliminator clear coat. Epoxy

[@DR_Bloom86]

Looks good and I like those wheels I had them on my old charger as well. Only things I would do different (and maybe overkill) would be after the scuff its best to use a wax/tar degreaser to make sure everything is off the wheels and then do a coat or 2 of primer before the paint.... Another good option to protect the tires is a deck of cards if you want want to rob the paint section at lowes lol. The 2 times I have painted wheels black I actually used high temp engine enamel paint, but I think any high quality enamel would be good.

[@rcrhinehart66]

Thanks so much!!! I had a black Detective's Crown Vic that I've been doing a resto-mod on. I looked at a hundred rims online and nothing clicked with me. Today I painted the formerly black steel holed rims with Behr Soft Iron Satin Metallic. It came out GORGEOUS. Thank you so much!

[@AngelHernandez-lk8oz]

I wanted to paint my rims black. This video helped a lot. Thank you!!

[@KevG]

Glad it helped!

[@jeremiahhoyle7085]

Just used the same Rust-Oleum professional enamel semi-gloss on my wheels and it turned out really amazing. The prep work making sure everything is nice and clean and smooth is the key and if you know how to use rattle can spray paint take your time keep your distance don't rush it and it will look great. I've used different spray paints on wheels and I think this one did the best by far smooth and clean finished product this is great paint for wheels I won't use anything else after this

[@davidkehaya9840]

You could save a step by using the scuff pad also known as scotch Brite pad while you're doing the washing. Also, if you're painting aluminum or alloys that don't have paint it's good to use an etching primer first to ensure paint sticks well or you could end up peeling or chipping in a short period of time.

[@Begreatbob]

does it matter which primer

[@johnwickbitch1298]

I like watching videos late and hearing people say there goal of likes or subs and then I check and it’s above their goal

[@KevG]

Man this made me smile

[@zretro-_rd5714]

I just did it today! Man, this video saved me!❤️

[@KevG]

Very glad! Happy to help

[@jackglass0505]

@@KevG just curious why didn’t you use a primer before laying the black on?

[@ArcaneCustoms]

Just a tip, if you put the rims on the side, it makes it easier to paint the rims and reach all angles. Painting downwards can make it easy for beginners to apply too much paint and cause it to run or even miss parts of the rim, but great work. Can clearly see the talent in your work!

[@J20-k8c]

Awesome video man, extremely straight forward! Thanks

[@KevG]

I appreciate it!

[@missdai9613]

Complete genius using the card to protect the tire! Now i think i can do it myself

[@KevG]

Not a bad idea right! I was just sure to take a few of each color that had a lot of cards in stock… don’t want to leave them with none 😂

[@titot.vt.v.1142]

Can you do a follow up and chipping and stuff looks good tho just wanna see the long term.. I wanna do my car but don't wanna mess up my rims if they just going to chip off like crazy down the line ?

[@eggy7346]

I smoked my lights for 20 bucks (paint cost). I've been practicing using paint/dip instead of vinyl and I've been having fun learning It's a useful skill for those who would rather spend hundreds in hard earned cash elsewhere

[@jmpthefirst570]

You should Do a update video to show how the paint held up over time

[@midnight183]

Every tire change you need to repaint unless it's powder coat paint

[@T_Y_G_E_R_]

@@midnight183 wait why?

[@luistomas9444]

@@midnight183 what’s the difference with powder coat?

[@khalilwalker6715]

@@luistomas9444 powder painted rims can be scratched and still look new

[@bluestang9530]

@@T_Y_G_E_R_ spray paint scratches off when they put the wheels on the tire changing machine, just had this happen with my car

[@lesteraddison4638]

Thanks bro. Very good video. I'm Gonna do this on my truck rims this weekend

[@alemb2582]

I’m about to do the same thing! 👏🏼 saving tons of money! 🤑

[@swat3isharder]

I scratched my black rims, so I need to patch the scratch. This video was helpful.

[@andrewferraro8797]

i’ve been looking for a cheap and easy way to get black rims/wheels and this just helped so much. bless up bro

[@KevG]

🤘🏼🤘🏼

[@petepeters3288]

Just painted my rims on my challenger. The black came out nice, saved me money.

[@raymondjeremiahchikakesta7404]

This was indeed helpful Thank you so much for going straight to the point without so many irrelevant stories.

[@ezonedawg]

Great idea with the card samples. I used an old deck of cards. Worked great!

[@amberforestrecoreds]

One of the most important videos on KZbin💯

[@KevG]

Much appreciated🤘🏼

[@armyslukecage38]

Did this on my Camaro !! Came out amazing

[@johnkotze7720]

Great video. Quick question, when spraying the black, sometimes it’s not completely gloss because I don’t spray the coats too thick in case of a run. But does the lacquer take away that dry look of the black? Thanks

[@rasmadrak]

There's glossy and "dull" clear coat. Choose appropriately :)

[@Middlestepofficial]

You can improve it further by applying firstly few layers of primer before painting as well as graphene coating after the clear coat is cured.

[@lynnfraser9195]

Hi Kev, loved your video. I have been thinking of spraying my alloys and was wondering if you or anyone you know, has tried using a matt finish paint. If so, what were the results and would you recommend it?

[@KevG]

Don't know anybody who's done that.. but good luck! should be the same result.

[@watchingthefireburn74]

Cleaaaan bro. Doing this to the trashed OZ racing wheels that came on my newly acquired WRX Wagon. They were painted in a charcoal colored plastidip with texture. 😤

[@MC-px9eq]

Excellent job, just got a question for you. Just before the 10 minute mark you gave a close up of the finished rim. Appears to be either air bubbles, dirt speckles or in perfections in the rim in the paint. Hoping it's the later, this can be removed with proper sanding, correct?

[@beverleylagunas3285]

I did exactly what this guy did, my rims are drippy and the paint is easily peeling off. Do not recommend.

[@MrBENTPIN]

@@beverleylagunas3285need to prime alloys with an etch primer then spray light coats. I doubt these will last that long

[@Nunyabidness2024]

That dust and crap on the wheel looks incredible!

[@djederz]

looks fire

[@KevG]

I appreciate it brotha!

[@kaleidoscopicmind5]

I got some black satin/matte work emotions and I low key hate them lol. They look almost blue ish. But they were expensive enough I don’t wanna have to pay extra to paint. I’m def gonna try this! Thx

[@TheAndy7042]

Definitely doing this too my noogaro gti rims

[@KevG]

Best of luck!

[@sneakerHeads825]

I am going to do this ,I have a 325i base model and I can't afford new 18in rims so this is the video I was looking for

[@dimmadeluxe6278]

Doing my rims with the rustoluem primer as well

[@KevG]

Good call. For a big color change I recommend it

[@EightiethRaptor]

I never thought of using sample cards like that, that's gonna make my life so much easier when I paint my rims

[@juniormata98]

How long did you wait for in between coats?

[@Roy-xu2nb]

I paint my wheels today, same color, thanks a lot for the video

[@zuhairsworld4074]

This is awesome, drop a before and after shot!

[@rogerskeir1]

I just seen the video very helpful to be honest thank you it was too late for me to know about the cards is there away to get spray off the tires

[@stevooliver3877]

I would use the clear design for wheels ..rustoleum wheel clear ..home depot has it..reason for the wheel paint cause it has the properties for UV protection & temperature rating for wheels...normal paint will peel at higher temps..the inner wheel gets real hot around the wheel bearing & rotor disc(which get cherry red at rush hour) normal clear coat will crack or spider vain with expanding & contracting

[@jkstdstang]

Might be picking up some incubus origin 22” tomorrow for my silverado for a deal. Seller says they are structurally sound but have blemished chrome. They are only a couple hundred bucks so if they wont clean up to my liking ill be hitting them with some paint if all goes well so thanks for the vid!

[@AlexVorasane]

Have you scratched them or dinged them since? If so, did the paint come off and the rest start to chip little by little?

[@villyrivera6856]

Thanks for the lesson ! Now I will paint my Vette wheels gun metal gray...

[@evanmillett6857]

I’d recommend doubling up on the clear coats with that product to put enough material in so that you can level and polish the finish after it’s cured to have an acceptable product. The orange peel in that finish screams rattle can

[@HalfdeadRider]

You'll still get that with a gun, but a little less so. Pros still cut and polish as clear never lays flat.

[@mazent8084]

Hi thank u for Video and Excellent job....soon my project to change my car wheel from silver to dark gray and I have minor dent all wheel I don't now how to fix I can filling body car use for wheel aluminium....thank you Again for Explaining..KSA.

[@scratchcrafter]

How long did you wait before you sprayed the clear coat from the paint? I’ve had orangepeel issues before when spraying clear coat too soon

[@scottreynolds1984]

spray clear within an hour or after 24 hrs stops orange peel

[@parthraj89]

Hey, I really liked your video. I have black rim for my winter tires. I want to have same look as what you did. How much spray bottles would i need? I want to black, glossy look. Could you please suggest how would get it from Canadian tire?

[@smileismild3095]

Hey man! Great video! I am wanting to do this soon but I just had a quick question - How do I spray the inner wall? I have light grey aluminum wheels and want to spray gloss black as well and I don't want the inner wall standing out. Should I do the front of the wheel first, wait to dry then flip over then do inner wall?

[@TheROBINFL]

Excellent question brother! That was gonna be mine for my wheels 👍✌️

[@KevG]

Yes I’d say that’s the best way to do it

[@HH_M313]

Respect bro 💯

[@slighce]

This is dope bro. Getting my Mazda rims painted black this weekend August 20, 2022

[@Mag1c4lyfe]

Turned out amazing man! Looks so good! Question for ya.. 2 cans of paint and 2 cans of clear coat will be good for all 4 wheels? Just wanted to clarify. Looking to do this on my Lexus rims👍😊

[@KevG]

Fauna the Deer thanks! 2 cans of each worked for me. Don’t cheap out on product and put the time into prep work👌🏼should be fine!

[@Mag1c4lyfe]

@@KevG alright thanks buddy! Appreciate it. 👍

[@davidnoahgoldstein]

@@KevG Funny you say don't cheap out... I was thinking you cheaped out by using crappy paint...

[@KevG]

@@davidnoahgoldstein it’s lasted 2 years!

[@davidnoahgoldstein]

@@KevG Thanks for the update that is good to know! I reread my comment and feel that it was a bit harsh... as your did come out good! I plan to do mine in the next few weeks and will do a bit of research to find the best product available (if it is $25 like yours that would great... if it is $150 that is fine too... as it is a lot cheaper than having it professionally done)!

[@kingcalero1088]

are 2 spray cans enough for all 4 wheels? please let me know I plan on doing this next week

[@raymundopalisoc6903]

Need to use a self etching primer then wet sand, also use a 2k clear coat it would look like a professional paint and it last longer.

[@sydost9514]

You don't need primer if you already have paint, because the new paint adheres well to old paint.

[@mgshizzle2213]

If u want half ass results do it the 25 dollar way if u want great results use 2k clear and wet sand get rid of that nasty orange peel then clear and use better paint and primer

[@e36fanatics]

@@mgshizzle2213 tell me biggest difference with 2k clear compared to normal clear? i always thought the difference wasnt in appearance but in the hardness of the clearcoat

[@mgshizzle2213]

2k clear is pretty much same quality as a professional would use on your car u can buy it at any auto body store its by far rhe best clear u can spray out of a can

[@e36fanatics]

@@mgshizzle2213 how to tell me you dont know shit youre talking about without telling me. Thanks

[@zerimar6970]

he talks about prep work. spray a couple of coats of automotive primer , 3 coats of black gloss , and 2 of 3 of clear. my wheels stay good for 4 years and still get compliments. I have painted a few sets by now

[@KILLAWATTS804]

Got a project Easter weekend i see...good shit cuz

[@bobbylong5349]

This guy is really into himself a legend in his own mind

[@KevG]

Nah just like goofing around😂can’t take life too seriously

[@lmhsvb9010]

I recommend finding some other clear coat because upgrading the clear coat would really make the paint pop more. I believe some 2k clear would do way better but then again i know if it is heat resistant

[@KevG]

Thanks for the advice!

[@SNiiFiinPAiiNT]

Hi guys, does adding paint enhance the appearance of curb rash? The damage is there either way but I’m also wondering if this changes up the process a bit

[@mimijoseph9036]

Black definitely would hide it more than chrome. HOWEVER if you incur MORE curb rash after painting it, it will be pretty obvious

[@wrek815]

Do you spray the inside of the rim? Curious since it wasn’t on the video.

[@PS-us5fo]

im wondering the same thing, idk if i have to or not

[@wrek815]

@@PS-us5fo I ended up doing the whole rim and it turned out nice.

[@Moosehammiez]

Love this video bro , this weekend I’ll be doing this if the weathers nice

[@jeanettelage6824]

Thanks to you my car looks dope🔥

[@KevG]

Love to hear it!

[@Tj-bf7me]

Ok so I followed it finished my wheels. Came out great! However I still had a can of clear left🤷🏻‍♂️ and did all the coats he instructed. Used Gloss Black came out like a matte and looks really cool. Will see how it holds up! I may post a video of it soon. Great video tho. However it costed more these days. Like 50$ lol.

[@KevG]

Glad to hear! And yeah, paint prices (along with everything else) are like double now🥲

[@Shermanator2010Tyler]

Using this method on my Tesla Model S P85D OEM rims this weekend, just sanded using an orbital sander, drill abrasive ball, and did first coat. So far so good. Wish me luck! Comment - For the paint samples idea, never understood why is everyone so worried about getting paint on their rubber tires? It will just wear off or give the tires a shiny "Just added tire shine look" which is OK with me! lol

[@MoparAdventure]

Done this a few times 3 coats each holds up well even when scuffed

[@marcusbritton3725]

Awesome job bro, have you ever tried that on already chrome rims?? Project coming up and wondering if I can apply this to that

[@cathrynhonschar]

I don't recommend painting over chrome. To do so properly, you'd really need to sand down the finish with multiple grits of sandpaper, and be aware that sanding chrome can be a bit dangerous, definitely need to wear a mask and long sleeves. If you just have a bit of rust coming through the chroming, try some phosphoric acid to clean them. It won't be perfect but will look a lot better....

[@MsChellaJay]

I came here not knowing what car you drive. I drive an Audi A5 Quattro and want to keep the original rims, but paint them a different color. Thanks for sharing this with us!

[@KevG]

Happy to help! And that’s awesome to hear haha

[@westst12burke56]

Awesome video man. Had a few ??'s 1) Can this be done with a Chrome finish? I have Copper-looking alloys right now. Or would you alternatively recommend something like stainless steel finish for a steel, shiny look. 2) Can you leave the tires on the car while you're painting (physical limitations). I was thinking I could either mask off the inside of the tire - or if the inside gets painted, who cares, it's still shiny? :) As long as this doesn't damage anything in the inside of the wheels. Thanks again!

[@cathrynhonschar]

There is no real way to get a chrome finish except actual chroming. If you want to paint your rims and have a metal-looking finish, you could try Rust-Oleum Bright Coat Metallic Finish spray paint in Chrome. Prep well and apply light coats, but please don't use a clear coat or you may completely ruin the finish.

[@cathrynhonschar]

You can leave the tires on the car when painting, just mask off well so you don't get overspray on your car. Overspray goes farther than you think...

[@CasoChosen]

Ooo yea I’m excited now. You sir just earned a subscriber

[@hammadkhan6584]

Hey mate can I apply this paint to my cbr's alloy wheel? it's not a metal alloy though, also does this peels off by kerosene ?

[@pauldempster640]

That wheel looks perfect . Question. If I'm changing the colour from standard silver to black do I still not need a primer. Thanks

[@jabreepatterson]

Thank you 🙏🏾 btw you only got 4 toes?

[@KevG]

I have all my fingers and toes 😂

[@SavageSpartan-]

FYI. Gumout Carb and Choke Cleaner works really well to clean the wheels from brake dust and oil, grease etc.

[@silentthunda84]

this video was helpful. leaving a comment.. Thanks. 👍🏽👍🏽

[@KevG]

Thank you! Glad I could help

[@Rolleminawoodty]

Starting a spray paint business after this thanks bro 😎 💰

[@MeAndMyRT]

I'm going to be doing the same thing soon

[@pheesh565]

Good video, does the prep work apply the same if you have chrome wheels?

[@MAaRo0c1]

I might have missed it, but did you mention how much time you let dry in between the coats ?

[@Elisarenee916]

Got a genesis coupe, gonna get coils bud can’t afford wheels atm too but I want to sand down the curb rash from the previous owner and paint my rims just for rnnn till I can get some wheels in a few months :) thank you !!

[@davidtravolta5293]

Nice job man I am going to do this to my fusion now.

[@KevG]

Good luck!

[@fish10381]

Thinking of doing the same David to my Fusion. How'd it turn out? Holding up?

[@davidtravolta5293]

@@fish10381 I sanded and used black matte spray cans with primer in it 3 coats and 3 more of 2x clear and they came out better than what I anticipated I just saved myself a load of cash on black rims and I also blacked out the head lights,tail lights,side mirrors, gas cap, black wing and black grill now I am just waiting for my side skirts and now the fusion is looking dark blue and sexy sleek with black detail around the whole car.👍 thx for asking pal.

[@nikamira1]

@@davidtravolta5293 did you take the wheels off to spray paint?

[@davidtravolta5293]

@@nikamira1 No I put cue cards standing upright close together around the whole edge of the rim. 3 coats of black with primer in 1 and 3 of clear coat of course after some light sanding and it came out professional thanks for asking and you can do it to.

[@honestreview9019]

Great work. Quick stupid question. Can’t i do it without removing the car wheels?

[@lilchvrles]

My A4 wagon in Saginaw says thank you 😈

[@jackfitzpatrick257]

sweet! Did you use 2 gloss black spray cans for all 4 rims? Thanks

[@SuperMoonem]

My have aluminum lines on my wheels. Do you need I primer or am I good painting on it without primer? thansk bro! helpful vid. I was planning to go with superwrap spray but they're removable.

[@bighes100]

5:05 it say's you don't wanna get paint on your wheels 😅. But yeah I sprayed my alloys the other week using the card trick (without holes in).... it really saves time & mess.