How To Pair A Lutron Caseta Pico Remote

[@connorb485]

Was already resigned to buying a bridge and stumbled across this video. Thank you soooo much for helping me to get my switch and remote working the way i wanted!

[@ericcaldwell3584]

Thank you very much for this tutorial! The other day, I added the Lutron Caseta SmartBridge Pro 2 to my Wi-Fi router via Ethernet and added my Caseta dimmer to it. Tonight when I crawled in bed and went to turn off my main bedroom light with my Pico remote as I've done for the past 3 or 4 years or so, nothing happened; the light stayed on. Apparently, adding my dimmer to my new smart hub automatically deleted the Pico from the dimmer. I searched Google for an answer, and at least one forum Said that the only way to add it back to the switch is to add it to the hub. I did NOT want to do that. I wanted it just the way I had it before. Adding it to the hub would mean that if I took away the hub, the Pico would not control my light anymore, I would think. Thanks to you and your video, I'm back up and running to normal again. Thank you very much!!!

[@strobaholic]

Great tutorial. By the time I got to this part of my installation, I couldn’t be bothered trying to read the manual. This vid was super easy to follow and saved me the trouble 👍🏼👍🏼. Greatly appreciated.

[@juanbedoya4735]

Easy, straight to the point. Thank you!

[@relent107]

Thank you very much, man! Just installed these in the one and only Nick Carter’s house (lead singer of the Backstreet Boys) and you helped me set them up. Much appreciated

[@rubymontelongo6649]

Thank you so much you are the only one who knew what they were doing.

[@OneHourSmartHome]

Thanks for your support!

[@ggeimer]

Thanks, I couldn’t pair my Pico light remote with my fan on the app, but the RF pairing worked perfectly with my fan controller. Now the app shows the pairing. The RF pairing tip made it possible.

[@jerryweiss7157]

Thanks - my switch/remote didn't come with directions on how to pair the remote. The directions I found at lutron were wrong. This worked.

[@tdvols]

Thank You for helping with how to pair the remote! The instructions that came with it did not specify how.Easy as pie!

[@stevewages]

Can you use any 1 gang cover plate or do you need to get some special Lutron Caseta cover plate?

[@georgeberetervide1415]

Simple and easy thank you

[@OneHourSmartHome]

Thank You!

[@seanlamarsh311]

Very helpful. Thanks my guy.

[@philipalexander8826]

Thank you great video

[@OneHourSmartHome]

Glad you enjoyed it! Thanks for watching!

[@danhoy350]

Thank you this was not listed on the QuickStart guide

[@carlyletom301]

I used the RMJ-8T-DV-B Power pac dimmer module and I wish the module could remember the dimmed level after shutting the lights off.

[@fitzmeister5992]

Consise and to the point.Thanks!

[@mark2524]

Thank you so much!!!

[@OneHourSmartHome]

Thanks for watching and the comment!

[@ApeRobHarris]

Thanks

[@flyguy330]

Thanks. That worked!

[@curtwarkentin6167]

I love my remote light switch in my master bedroom. But I bought this kit at Lowe’s and there was no instructions in the box. I hooked up the switch super fast and easy but pairing the remote I had to KZbin it. Lutron needs to seriously consider putting that extra step in the box. Save some of us a bit of hassle.

[@Christian-zz7zr]

Worked! Thanks

[@glockman9c]

Can you use the 4 scene pico on regular home caseta base? It is a pro sku but will it work on non-pro bridge?

[@OneHourSmartHome]

I'm not sure I've never tried that. Is this the pico remote your referring to: amzn.to/3UR9IWl if so it works with the both the pro and non pro bridge.

[@glockman9c]

@@OneHourSmartHome - No. There is a 4 button 3 scene controller pico. Each is engraved for kitchen, theater, family room, or blank. Each button can control any number of lights like a RadioRa scene controller. I was told it will work with regular Caseta bridge. I just ordered some so we will see. Lutron PJ2-4B-GWH-P01 Pico 4-Button Family Room Keypad - (White | Gloss)

[@thomasw796]

The Lutron instructions were very unclear. I went and purchased a Smart Bridge Hub which after viewing your excellent video is totally unnecessary for a simple remote to one wall switch. Next time I will check your Videos!!!

[@turbogokart]

By pairing via RF and without the bridge on wifi, do you lose the ability to control this switch thru the app?

[@OneHourSmartHome]

No it still will work with the app.

[@winstonbarnhart9433]

Is it possible to pair two different single pole switches together, so that you could have one or two remotes powering the two individual lights together at the same time?

[@heatherspore5343]

what happens when you do that and then the remote doesn't actually control the light after? Could it be defective?

[@edgarbaron8218]

is there a way pico remote can be used without the use of the hardwire switch?

[@takeonetheater]

Thanks!

[@rosepassi5271]

Thank you good sir

[@dpierce178]

What’s the middle button do on the remote?

[@daylightSWW]

Can you use these without buying the hub?

[@кйфарик]

Thank you !!!!

[@morrisdibiase9164]

I don’t bother reading manufacturer’s instructions anymore. My go to for how to and instructions is KZbin!

[@jessebotello3617]

I connect them manually but when i connected the in wall dimmer to the app the pico disconnects and doesnt work anymore

[@Raptormeatx]

How far does that remote go before it doesn’t work?

[@RogerDiotte]

I have a remote switch in my house that controls lights on my barn and I'm FAR! I'd say the switch is going from inside my house through the walls obviously then about a good 70 feet and penetrating a steel sided barn etc...so it works FAR!

[@Raptormeatx]

@@RogerDiotte thank you! Ill pick one of these up

[@RogerDiotte]

@@Raptormeatx In it's specs it says it'll work 60 feet line of sight and 30 feet through walls and obstructions! I know it works very very well. Here's an original video I did awhile back that shows how far to my barn that these control...kzbin.info/www/bejne/i32ZlKB5fK2BiZY

[@johnterdik4707]

I purchased 6 pico switches but will be returning two because I don't need them. I paired two with two different switches that were wired to lights in my house and they work as expected. I attempted to pair two other pico switches to two other switches but cannot get them to pair and have made several attempts. I've rewatched the video several times and tried after each viewing, still no success. I press and hold the off button of the switch connected to my light. After 6 seconds the light comes on and the lights on the switch is blinking. I then press and hold the off button on the pico. The green lights on the wall switch go out after 6 seconds or so, the light in the ceiling is still on, I'm still holding the off button on the pico down. In a few more seconds the green light on the pico comes on, but the ceiling light does not go off (I'm still holding the pico button down). I tried both pico units and 3 different wall switches (the wall switches are connected to two different light on different circuits). I want the two pico units to each control one of the two ceiling lights. Since I was successful with the first two pico units it would seem that I'd have success with the second two. Perhaps it is just old age getting in the way.

[@johnterdik4707]

I forgot to mention, I've gone through the unpairing process on each pico unit (a few times) in an attempt to ensure they were not paired.

[@johnterdik4707]

I just took pico 3 and four and paired them with the first two wall switches. I then unpaired them and attempted to pair them with wall switches 3 & 4. Still, they would not pair.

[@johnterdik4707]

I called Lutron tech support. After much testing and resetting the Pico and the wall switch a few times, I was able to pair with one of the wall switches. The tech stated that the 2nd switch was defective and is sending me a new wall switch.

[@gcamacho]

This video didn’t work for me. When I held the button down on my dimmer switch, it never flashed like in the video.

[@OneHourSmartHome]

It's possible your device is already connected to something and you need to reset it. Try this: kzbin.info/www/bejne/aWqaqq2OgqeakLM

[@RogerDiotte]

Yes me also...I don't think my switch is connected to anything other than this new switch that I installed and running 4 lights?

[@hunamsafee2]

Ahh the old 5 way switch

[@RogerDiotte]

Not working for me...holding the off button for 100 seconds now and no flashing!

[@boowah--6201]

Mine isn’t doing it

[@OneHourSmartHome]

Sometimes you have to try it a few times to get it right.

[@siendofranciscojavier]

Hi, my rc doesn' t pair.

[@shawnkemp9454]

How do you disconnect them?

[@machisher]

THANKS