How To Pass Forklift Test 2023

[@trailhiker43]

As a trainer for 15+ years, I give this video high marks

[@forkliftjoe3620]

Thanks💯

[@miroslavklaric5538]

​@@forkliftjoe3620 I wanna do the test so If you got any advice, thank you

[@inktownlegend]

The “carriage” is what attaches to the “mast” and the pallet should be against the “lower backrest” (aka, the “LBR”). As a guy that actually installs those parts on Hyster trucks for a living, I give your training a solid A+ and appreciate you providing the information to those that need and/or want it. You’re actually helping folks, so keep it up! 💯

[@forkliftjoe3620]

Thanks Bro

[@ProsperUdeagbala-qs8nu]

@@forkliftjoe3620 Joe please do a video where you are staking a pallet

[@LifeOdysseyMotivation]

@@ProsperUdeagbala-qs8nu you mean, "stacking"?

[@pdxdmt]

Thank you for making this simple and easy. I start a forklift job soon. Never drove one before. Thanks to you I wont look as dumb. I appreciate you! 🙏

[@frankiezzzzzz100]

Thank for the teaching us how to do forklift I really learned a lot. May The Lord Jesus Christ who died for the forgiveness of our sins on cross was buried and resurrected from the dead the 3rd day be with you forever.

[@RossLemon]

I just started driving a lift for the first time ever back in June. I've gotten a lot better at it, but I'm still a beginner. My test was really bad. It was just pick up a pallet of parts, drive it about 50 feet in one direction, and then drive back and put it back down. And then I was certified. Even though their test was not thorough enough thankfully I'm a fast learner and I can drive it decently enough to where I won't cause any issues.

[@TOOINDABUILDING]

Just found out what all I needed to do to pass my test in 2 days. This video just made me more confident in my knowledge. I've never tested for this, always hopped on, moved a load, then hop off. Now I see how important it is to know all the stuff you covered. This a valid ass video, thank you

[@Pun4500]

Did you pass

[@ME-th9yo]

Thanks man about to take my test after my lunch break and super nervous but I’ve been driving a lift for a while now but I really need this job pray for me family

[@MB-pc4cs]

I'm experienced with a forklift but was never certified until today. And it was really simple 15 minutes not including my the written part which I did in early January. In a room roughly 20 ft x 20 ft, with a steel pole in the center, she made me do the check list, lights, mast, fire extinguisher, etc, etc, etc, then she made me get in, pick up a pallet, back around in a circle around that steel pole until I was in my starting position. Then she made me pick up the pallet again, back out and turn to place the same pallet on on upper level. She told the only way I could fail is if I damaged property, or people. Which I didn't. Certified. It's pretty easy actually. Forklifts are easy to operate. I used to need to load 4 of my own pallets onto a 1 ton cude truck inna warehouse, with minimal space between the back of the tuck and whatever was behind. 5 feet space, ouch ng the first to skids up towards the nose of the truck with 3 and 4 pallets. I had to learn. I remember getting into a heated yelling match with my manager about 15 years ago about that. I asked him if he could load my truck for me, he was good on the forklift. I was not certified. He told me to do it myself. I lost it on him. "F*** YOU! I AM NOT CERTIFIED TO USE THAT THING! I HAVE NEVER EVEN DRIVEN IT! WTF!?" I lost it on him in the warehouse in front of everyone and this is a big guy. He could pick me up and throw me through a wall I he wanted. He gets freaked out. I remember him recently, 2017, we got into it for her something he come over to me and grabbed a hold of me almost I'm a big to restrain me because he wasn't sure if I was gonna lose it on him. I think me exploding humbled him. I look crazy when I'm that angry spit flying out of my mouth, barking yelling, truely angry, not a show. I honestly believe it scary to him because he didn't know if I was going to lose it and attack him, I was already super stressed. It was a winter day, storming and I am going a long distance with a lot of stops. I lost it on him, he points towards the office where the boss resides and says "that's who you talk to about certification..." And his tone, I knew I humbled him because I was mad. I was p***ed, but I also had to show him up, so I learned to do it. Without certification. I hadn't driven one in 15 years until this newest place and it felt second nature to me.

[@emphaticstew5807]

Have a forklift test tomorrow at my community college, this really helps calm the nerves! Thanks man subbed and liked the video!

[@slammysosa]

did u pass

[@leonlooby6222]

I’ve been watching your videos because I have a test today/ your videos really helped me out. Appreciate you

[@jimkontos4221]

Safety is the key thing to any job

[@forkliftjoe3620]

I Agree my friend💯💯

[@jimkontos4221]

I operate a slicing machine in a deli I cut cold cuts all day long I always go slow and take my time

[@forkliftjoe3620]

@@jimkontos4221 Yes Sir if you recorded those would be perfect for ASMR videos

[@Veltrosstho]

"Appears overconfident" "Appears nervous" Brother, it's already got "seems irresponsible". They really padding the test, ain't they.

[@nwodofrancis2348]

Planing on going for a forklift course soon but watching videos to know much

[@joshuavelez4436]

So when you’re taking pallets off high rack you pick it up some then tilt back? Then do you bring it down straight or still tilted?

[@nelu9731]

Thanks Joe, we appreciate your work. Could you please make a video about the mandatory driver's clothing, and how to change the gas bottle. Thank you.❤

[@forkliftjoe3620]

I did do tank video already and clothes depends on the warehouse

[@marteyreuben5147]

Thank you Joe for the good work. I watched your videos, I was very confident the first time I drove a forklift.

[@Princesswarriorjesuslover]

Do you keep the load tilted after you tilt it to get it off the rack ? And when you pick it up at a lower level are you obligated to tilt it ? And keep it tilt or do you un-tilt it after you Titled to pick it up after

[@txc_denair]

My man, I appreciate your tutorials

[@jaybe7542]

What’s up question. If the load is to big to see over so I have to drive backwards but in order to do so and exit I need to turn the forklift around but the area is to small to do so, do I lift the load till where I can see then turn it around and lower the load then continue to drive backwards? Or do I move forward with the load I can’t see over until there’s clear space on my sides and turn around? Seems unsafe so to me lifting it in the air, turning then dropping seems like the best option, am I right?

[@Darrkknyt1117]

Thanks man I really appreciate it I have a forklift test tomorrow. I was glad I could come online and make sure I had a heads up things. Thank you much 👍🏿

[@yuyeron]

Im taking my exam tomorrow, cant believe I found this video now. THANKS MAN

[@forkliftjoe3620]

I have plenty more on forklifts bro

[@fredjackson7613]

Pick it up, and lifit down my guy!😂

[@forkliftjoe3620]

Yes Sir💪🏾

[@Szotowiec]

having forklift papers, I watched the entire video🤣,greetings from poland ✊

[@francisowusu5532]

Hello big man will I apply break first before lifting it forklift up

[@johnmahchong1959]

On the theory test, do i write down what we answer I can remember of my head or is it multiple answer questions, where I am able to circle all the answers I think is right?

[@PeggyGonzalez-mv5jk]

You're helping me thank you so much from the bottom of my❤❤🌹🌹🤗🥰

[@blessed403]

Thanks Joe, please how do you know the weight or load Forklift can lifted up ⬆️ are you going to lift the load up without checking the weight?

[@forkliftjoe3620]

These lifts can pick up pretty much pick up about 3,000 pounds with weight directed on forks. I rarely lift anything that heavy so I don’t check weight

[@randomshit1645]

I’ve been certified since April 2023. I watched so many videos of forklift drivers it gave me a lot of confidence.

[@jackiepaper3974]

Thanks for the videos man. Starting certification tomorrow.

[@gweatgunzz1904]

Start a forklift job Monday my boy thanks

[@PeggyGonzalez-mv5jk]

THANKYOU august school😂

[@alisonfalby574]

Thankful you are verry informative.

[@Kehsejogi]

So glad I' have this behind me...

[@BagOCheetos]

I have been driving forklifts for over 15 years. I took a break from working to go back to college for a few years because of the pandemic, and so I became rusty and lost my confidence. These videos are phenomenal, and have really brought me back to my old self. Thanks buddy!

[@broahmed7744]

Bro Joe, I wanted to if I should start checking the oil and water when going for taste? Thank you for your service

[@forkliftjoe3620]

Real companies have certified mechanics from outside or inside company to perform that type of work.

[@xxblazinbeatsxx4314]

I’m thinking about getting my forklift license and just found ur channel and have learned a lot. Thank you for all the education u give and any advice ? U just earned a sub brother

[@forkliftjoe3620]

Thanks @xxblazinbeatsxx4314 💯💯

[@francisowusu5532]

Good brother God bless you

[@bhamptonkc7]

good one

[@dariuszwiszniewski8925]

What about the pre checks

[@Hunnitghost]

That hoody is dope

[@DiorMade-w3e]

Life saverrrrrrr🔥🔥🔥🔥

[@Kas1645]

Do you only tilt load back when travelling ?

[@forkliftjoe3620]

U always wanna have load even but up off ground by 2 to 3 inch’s at least

[@katim3271]

Thank you for your explain!!! I really appreciate it :))))

[@nico2789]

Thanks man! Comment for the algorithm

[@forkliftjoe3620]

Always! Glad I can help💯💯

[@riisecombat8187]

Thanks very much bro, very informative!!!

[@Pennytung101]

Great Video! I have my 1st lesson today, it's great help for reviewing what i've learnt!

[@dennisddiamond854]

You mean learned? No such word as "learnt"

[@Pennytung101]

@@dennisddiamond854 I hope you know how to use google "They are both past tense forms of the verb 'learn', and are used to indicate that someone has acquired knowledge or a skill through study or experience. However, learnt is the more common spelling in British English, while learned is more commonly used in American English"

[@EGonZZA]

I'm trying to get my certification soon thanks a lot for the video man much appreciated stay safe bro

[@Princesswarriorjesuslover]

Thank you god bless you I needed this for my certification tomorrow!

[@ibeosinachi1158]

Hi joe. Must I tilt every parcel am about to pick up ?

[@forkliftjoe3620]

Yes to stabilize

[@ibeosinachi1158]

Ok Sir. Thanks. I'm greatful for the feedback .

[@VICEISDEAD27]

Thank You From London 🇬🇧 I will keep this video on repeat🔁

[@LifeOdysseyMotivation]

Thanks bro.

[@Steven-k4c]

Yes thank you I appreciate it very very good instructions you did a great job easy to understand

[@HawaKikuyu]

Thanks for this video and me I want to apply this job

[@shaylanewlife]

So at my Job I am in training class for 2 weeks. I started today first time doing forklift. Can I get certified through my employer or I'll have to go to school to become certified???

[@forkliftjoe3620]

Both but most likely Employer if they have a certified trainer.

[@shaylanewlife]

@@forkliftjoe3620 Aww ok 😊

[@BidenOurTime]

Legit

[@richardkern2170]

💰💰💰💰💰

[@martynreed835]

Cheers bro. Really useful 🇬🇧🇬🇮

[@RizwanKhan-y4m9r]

Thanks for teaching. sr❤

[@petera4821]

I assume the test is for America.

[@NotaFollower11]

I have my test today, thanks for these videos brother

[@matthew-gowen]

THANKS JOE MY TEST IS TOMORROW 👍

[@RedWoodtrees77]

Thank you ! Thank you!!

[@Jacob0590]

@Forklift joe im interested in operating forklift but i have no experience what should my first step. I was told to take an online certification test if i pass i can apply and my training would be in that job is this correct and what website do visit thank you joe for this videos i been studying some questions asked in the exams i really want this job

[@forkliftjoe3620]

Watch my other videos and start to apply immediately they will give u a lot of confidence

[@aarondaniele4141]

Thank u for this

[@iordachesilviu2371]

Thank you mate

[@dmitrylogvinov8752]

U S E F U L!!!🔥🔥🔥👍👍

[@wilbamate]

Thank you ❤

[@happyhappyhappy365]

nicenice！

[@LocalBreadCreature]

If you’re moving a pallet of stuff off the high shelf are you allowed to get out and make sure you have enough clearance to lower it or does that make you fail?

[@forkliftjoe3620]

You should be able to see from inside lift so short answer yes u can fail.

[@forkliftjoe3620]

You should be able to see from inside lift so short answer yes u can fail.

[@SSDirk1976]

Man thank you so much for the great , detailed Forklift Video Sir - I am looking into becoming a certified Forklift Driver in 2024 and this video helps out immensely #PICKITUPLIFTITDOWN

[@Diddlemiggers]

Thanks cuz

[@krhymestein]

Really appreciate your time in helping out with these videos 👏🏼🙌🏽🫰🏽💯

[@forkliftjoe3620]

Thank you 🙏🏾