How To Perfectly Tune Your Slot Car Chassis Height - Tips And Tricks!

[@3roomsraceway612]

Nice educational video Nico Keep it up mate👍 🍻Mal

[@slotcardude68]

Thank you, trying to come up with more helpfull content.

[@IrrerasCarrera]

Very cool Nico! Thanks for sharing your methods🎉

[@slotcardude68]

@@IrrerasCarrera hope I can be of help!!! Thanks Joe!!!

[@josephstanczak4340]

Just found your channel. Great tech tips. Very clear and to the point. Thank you!

[@slotcardude68]

@@josephstanczak4340 thank you!!! Check my Playlist, there are more hints on how to setup a slotcar!!!! Thanks for stopping by and feel free to subscribe to my channel!!!!

[@Lews_SlotCarTesting]

As always very good information!🏁

[@slotcardude68]

@@Lews_SlotCarTesting thank you Lews, always trying to help!!!!

[@JimsSlotCarObsessions-v2k]

Looks like a tip that most would want to do on there cars why would you not .. great tip ... Thumbs up

[@slotcardude68]

@@JimsSlotCarObsessions-v2k 🙏🙏🙏👍😎🙏🙏🙏 thank you!

[@SCALE_SLOTCARS_AND_RC]

Great stuff Nico .we need posts like this for folk who don't know , I too like my wheels to just touch the track and in some cases sand a little angle at the trye edges 🤗thanks for sharing as always your valuable advice 👍

[@slotcardude68]

@@SCALE_SLOTCARS_AND_RC thank you Harry for your ongoing support!!!! Trying to help wherever I can!

[@DTSlotRacing]

Now I know where I been going wrong thanks Nico great tips 👌🙏

[@slotcardude68]

@@DTSlotRacing more than happy if I could be of help!!!!!!!! Thanks for stopping by!!!!

[@DASSlotCarBox]

Nice instructional video Nico. Cheers 👍😎🇦🇺

[@slotcardude68]

@@DASSlotCarBox you're very welcome, hope it helps!!!!

[@slotr]

Great video Nico, like you say there is no wrong way, I prefer mine slightly more on the braids than on the wheels :)

[@slotcardude68]

@@slotr it all comes down to personal preference!! Thanks for your comment Dave, highly appreciated my friend!!!!!!

[@BSslotcars]

Nice! I had to do that with our racer sideways lambos then they ran so much better!

[@slotcardude68]

@@BSslotcars yes, adjusting the front hight does improve the handling of the car so much!!!!!

[@kylespeed1]

Handy to know, thanks

[@slotcardude68]

@@kylespeed1 glad if I could be of help!!!!!

[@SlightlyMadSlotCars]

Your the dude👀🚙🚘❤️👍

[@slotcardude68]

@@SlightlyMadSlotCars thank you SlightlyMad, highly appreciated!!!!

[@pachifueradecarril]

Muy bueno 👌 NICO😊

[@slotcardude68]

Muchas gracias!!!

[@Bavarian_Diecast_Racing]

Wow, way kool 😎

[@slotcardude68]

@@Bavarian_Diecast_Racing thank you buddy!!!!!

[@HBslotcarBench]

thats the way to do it!!!...okay next movie...set the difference to wood/Carrera/Ninco Ninco particular requires a completely different attitude

[@slotcardude68]

@@HBslotcarBench I absolutely agree!!! I just picked the 2 most common used tracks over here where I race

[@modelracecar]

Where did you get that chassis, it's 100% identical to one I designed and printed, in fact I'd say that is one of mine because there's features on it not being used.

[@slotcardude68]

@@modelracecar I bought it at the UK Slotcar Festival 24 together with a Hoonigan Mustang V1 body

[@modelracecar]

​​@@slotcardude68 that's right I couldn't recall what car it was, I printed that bodyshell and that's my chassis... I'm over the moon that you're using it to show what it can do. The front axle holders are actually sized to take a 1/8" brass tube, the chassis is designed for inboard spur gears either side as you'll see the little cutouts and clearance. I have the original car in my collection and it goes really well with the same motor you have shown.

[@slotcardude68]

@modelracecar Great body print as well!! I will document the rest of the buildup here on my channel. You can already see the body in my Community pics here or on my Instagram channel! You can also find a Short video here on my channel with the body.

[@Bowl_of_roses]

Are you using M2 grub/set screws?

[@slotcardude68]

@@Bowl_of_roses yes, the long ones! So either 6mm or 8mm in length.