How to Perform an Oil Change 13-19 Mazda 3

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/85/r/...
In the video, 1A Auto shows how to change the oil. The video is applicable to the 13, 14, 15, 16, 17, 18, 19 Mazda 3
For More Info visit us at 1aau.to/h/zC/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@Guill0rtiz]

I’m obsessed with how having the right tools makes everything look easy.

[@christhorndike4614]

Expecially a lift😂

[@shanequinn8356]

Prime the oil filter protects the otherwise dry paper element from possible Micro tearing when new engine oil blasts thru on first startup as new oil pushes on oil, not paper. Provided filter is oil soaked new filter can be horizontal and half prime still protects. Great video, you can service my Mazda anytime.

[@HDVrock]

Great job! Fast, simple and straight to the point.

[@1AAuto]

Thanks for watching our video! +HaiDef

[@johnnyboy1586]

It's good the filter is fitted directly straight up as it allows you to prime and fit very easily

[@garrettw99]

These originally came with a hex drain bolt that is known for stripping. It’s good to get a regular drain bolt like the one in this video

[@BabaG]

I love your how to videos, makes it easy to tackle things & make it easy to order the parts too. Thank you

[@1AAuto]

+Baba G Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@MeticulousTechTV]

is 4.5 the total including what you primed the oil filter with? Or is it oil filter prime + 4.5?

[@HansLotap]

thank you for this video. planning to do it myself on my mazda 3 2018 1.5L

[@mdd47]

This would be so much easier without that plastic cover in the way, but I will hand it to Mazda, they made the filter and drain plug really easy to access once the cover is off.

[@louislopez55]

The plastic cover just pulls right off, no tools required. (And it pops right back on) I leave mine off in the summer, and reinstall it for the winter. I always remove it when changing my oil.

[@cobramanphil]

For some reason I thought the oil plug was an 8mm hex bolt...I could be wrong or it could be different on different model years.

[@Frickitall]

Thank You

[@abdulaelchami7851]

The 2014-2017 mazda 3 bm and 2012-2016 cx5 and mazda 6 have 8mm hex bolts any mazda newer has a 17mm drain bolt

[@prometheanspark]

Mine has the 8mm hex bolt too (using 8mm Allen wrench or Allen socket).

[@Kyle_Nelson]

Good video, but I always check for leaks at the filter after initial start before calling the job done.

[@1AAuto]

+Kyle Nelson Thank you for the suggestion! 1aauto.com

[@athenahepler4030]

That's a cool torque wrench Great straightforward info btw. Ty

[@1AAuto]

+Mavis Beacon Thanks for checking us out! 1AAuto.com

[@idealynx]

Coolest torque wrench I have ever seen. Do you have a link to it?

[@Kyle_Nelson]

It is cool because its a professional wrench from Cornwell tools which can only be purchased off the tool truck and cost more than $300. More than the novice mechanic is willing to pay.

[@TheMarkoPoloProgram]

If you're a novice mechanic, it would be a good investment to make. Better having piece of mind than over or under torquing bolts which can be a costly repair in the future.

[@chetryar]

I live in Central America according to the weather I recommend using 10 w 30 synthetic, is that correct?

[@atifbashir2452]

What year is your car I can tell you which oil you should use

[@chetryar]

@@atifbashir2452 es del años 2014 2.0 skyactiv segun manual fuera de usa y canada usa 5 w 20 o 10 w 30 sin importar el millaje

[@d1zguy864]

CHETRY AR 10w 30 is best for engine 0-20 only exists in USA because of stupid epa and mileage requirements manufactures face. I always put 10w 30 on all new cars during summer and 0-30 winter

[@greggnelson1462]

Wouldn’t you want to fill the car with oil first and then check for leaks around the drain plug and the filter after the car has been running before you put that panel back on? How else would you know if it was leaking or not unless there was oil back in it?

[@louislopez55]

You would know quite quickly if it was leaking badly as it would be dripping onto your driveway. I always check that the old o-ring gasket is not still attached to the oil filter connection. After you have done an oil change several times you don’t have to worry much about it. On my Mazda 3 I replaced the oil drain bolt with an EZ-oil change plug. I never have to remove the drain plug, just move a little ball valve lever to drain, then move back to close. Makes the job much easier.

[@556suppressor]

Excellent Video. My Dealer now charges $100 for an oil change so I'm doing it myself.

[@1AAuto]

+Dave223 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@009pru]

These videos be so satisfying

[@1AAuto]

+Tallz Thanks for the feedback!

[@idiotboyidiot]

What is the type (brand name) and source of the filter wrench socket used in this video?

[@MeticulousTechTV]

I have a very similar one, got it from Walmart I believe

[@elvistwatty]

Have a link to that oil filter wrench part that grabbed the oil filter

[@unskillfullymasterful]

i wanna learn how to change my own oil, doesnt seem that hard. i just wanna know how long it takes for the oil to cool down? like, if im just turning it on to drive it from front yard to back yard, only like 20 feet?

[@1AAuto]

+소라 Thanks for checking us out! If you are only moving it a that short of a distance it should be okay to work with as the engine won't have time to fully warm up. If you're divining it for several miles it would range anywhere from 10-30 mins to have it not burn your hands, but you should be good to go as soon as you move it.

[@ВалерийШабунин-т3г]

Thank you so much !!! I will try this week) How much liters does the engine need ???

[@amandawong4969]

My 2016 mazda 3, 2.0L requires a purchase of 5 quarts, and it will take somewhat more than 4 quarts but not all 5.

[@amandawong4969]

Not sure about liters to quart conversion

[@addyrcshorts]

I have a Mazda 3 2012 some ppl says since it's old use 5w 30 or 5w 20 but recommended is 0w20

[@onixtheone]

Question: I have a 2017 Mazda 3 2.0 skyactiv G and the manual says to use 0w-20 in USA AND CANADA, but it says everyone else has to use 5w-30! What’s the deal here which is best for the longevity of my investment??

[@1AAuto]

+Onix Junes 0w-20 is better for fuel economy but once the car is up to normal operating temperatures both 0w-20 and 5w-20 are going to identical in viscosity. But for initial start up 0w-20 does less harm to the engine than 5W oil.

[@onixtheone]

1A Auto Parts thank you for that

[@MyKonaRC]

Your owners manual will have the correct information. If ever in doubt, contact the dealer.

[@vzsoltie95]

Both are good. 0w-20 for short trips (for better cold start), 5W30 for longer trips. If the engine is using too much oil about 0W-20, you have to switch to the 5W-30.

[@ishannage248]

Hi, I just did this for the first time today and this video was really helpful. I didnt have time to wait for all the oil to drip out and then I filled it with 4.5L of oil but im worried I put a bit too much as the oil on the dipstick while hot is a little bit higher than the max dot (little less than 1cm) Is that a problem?

[@mdd47]

You're fine. The amount of overage you describe isn't enough to hurt the engine.

[@briany3002]

Youd need to overfill it more than half a quart for it to cause damage. I always fill it with about 4.7Q just to be safe

[@stevenc9207]

@@briany3002 this answer is very manufacturer specific. There are brands that can be very sensitive to over filling (like Porsche). You shouldn't be deliberately overfilling the oil to "be safe". That's not safe. You should fill it the amount it needs.

[@steveyb1901]

What type of screws are the first 2? I know you said you can remove with 8mm socket, but I'm having trouble finding the exact part/screw #. Thank you! (my access panel/cover got damaged, and I want to replace the 2 screws/plastic push inserts).

[@BManVancouver07]

You HAVE to use a filter socket? I have a strap wrench and an oil filter wrench but no socket.. so I have to buy one? Is there room for the above mentioned tools?

[@sebbstarr7453]

what about the transmission oil? can do a video on doing the oil change please😊

[@checkdacontract]

Great video. Thanks for sharing. What torque wrench brand do you recommend ?

[@m74796]

Quality work , nice to see !

[@arthamilton2379]

Very well presented, really clear video, thank you.

[@markreynolds3850]

Thanks for sharing this video, great job.

[@parbjotkhela3072]

Is there a link to the oil filter removal socket? Used in the video

[@1AAuto]

+parbjot khela We currently do not carry the tool you are looking for.

[@marshawinegarner8237]

Excellent

[@juanpower1969]

How can I reset the oil change light ????

[@4uanC]

Juan Martinez In the maintenance app on the LCD system.

[@rwolhar]

Must be reset when the vehicle is in park as well

[@doniadalia]

I’m excited to do this myself

[@social3ngin33rin]

I wish every home garage had a car lift lol

[@andrejcollak9347]

great video thanks

[@mishutz]

What oil filter wrench is that, please?

[@Mr-gb1ob]

Full synthetic , or blind, or regular?

[@LordiJaForge]

Great video! Thanks!

[@buddybadee]

Where can I get that body clip tool?

[@memduh4166]

Is oil brand VALVOLINE ?

[@FC2ESWS]

What is that tab puller thingy?

[@Pewpew4]

Can someone tell me why brake cleaner is listed, but not mentioned? I assume it’s to clean a part, maybe the drain plug bolt? Thanks

[@1AAuto]

+Joseph Thank you for checking us out! Yes, the brake parts cleaner is not required, its just to help clean off any really dirty parts.

[@joelandrade9607]

Do you know where I can find those 8mm screws??

[@1AAuto]

+Joel Andrade Thanks for checking us out! You should be able to get these at a local parts store. 1aau.to/m/Shop-1AAuto-c

[@questionmark9444]

It'l be nice to know how to get rid of the wrench icon

[@1AAuto]

+Question Mark Thanks for watching. That information should be in your owner's manual! 1aauto.com

[@america12183]

Question Mark through the Mazda connect thing. Scroll all the way to the left and it’s one of the settings in there.

[@aaronbistran8281]

Bruh my push pins did NOT go back in like that lmao

[@1AAuto]

+Aaron Bistran Thanks for the feedback!

[@modvs1]

Is that an SP-25?

[@toetoejones]

What did she mean by prime the oil filter?

[@SwayNotZay]

Filling the oil filter with oil

[@kylejrauscher6459]

Thankyousue!

[@1AAuto]

Thanks for watching! +Kyle j Rauscher

[@dlin7810]

I have 2020 Mazda 3 (skyactiv-G 2.0). If I replaced the oil filter, can I just add 4 liters of oil? Because a bottle of oil is one liter.

[@muhdhazim9106]

what oil is that

[@akent46]

4.5 litres not quarts

[@vinny2474]

whoa whoa whoa whoa whoa..............what about the 8mm drain plug?

[@jack765ful]

... what about it? Am I missing something? 🧐

[@gilberttorres3161]

New oil filter or just priming the old one?

[@1AAuto]

A new oil filter was used and was primed before replacing. Hope this helps you out! +Gilbert Torres

[@gilberttorres3161]

@@1AAuto benefits of priming new filter?

[@Golright]

@@gilberttorres3161 She already mentioned that in the video that, when the new oil pressures the new filter when it is dry, it might wear the new filter therefore she is priming it to avoid wear/tear by the first pressure.

[@MyKonaRC]

@@gilberttorres3161 Nothing. How is someone supposed to prime a filter when it goes on horizontally?

[@MyKonaRC]

@@Golright Lol You don't understand how oil pressure works in a car. Try again.

[@oldarkie3880]

You should have reset the oil life monitor computer.

[@mr140893]

Don't see Valvoline...

[@joshw1356]

Lol a woman

[@Hupuable]

5:33 NOOOOOOOO

[@freedomstar3814]

I told my ex gf to use 4.5 ounces of oil .... she said the old oil looked like more than 4.5 ounces ...... I told her because it's old ...... only takes 4.5 ounces when it is new ..... opps ...... just kidding :)

[@justasadomavicius9249]

2:38...?????👎

[@mig21m13]

Most stupid idea to fill the filter with oil.

[@kentcassidy7116]

Why?