How To - Pioneer DEH-S1200UB - Subwoofer Settings

In this video, you'll learn about the Subwoofer Settings on the Pioneer DEH-S1200UB.
You can find more videos about the Pioneer DEH-S1200UB in this You Tube playlist: • Pioneer DEH-S1200UB - ...
For more information about Pioneer DEH-S1200UB check out: www.pioneerele...
Follow Pioneer on facebook / pioneernorthamerica
Join the conversation with Pioneer on Twitter / pioneerusa
Follow Pioneer on Instagram / pioneercaraudio

[@zainaman710]

Thank you for the help.

[@pioneerelectronics]

You can find more videos on Pioneer's KZbin Channel here: www.youtube.com/@pioneerelectronics

[@eosroorigin4801]

Thank you so much

[@pioneerelectronics]

You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@ZER03542]

can u explain again this -24 to -12 thing for the LPF? what is better and what does it do?

[@deckerdotto6035]

Please read this complete answer, I hope you'll find it interesting. The -12/-24 thing is the slope for the crossover. The LPF is a Low Pass Filter also known as a crossover. When you choose a crossover point, for example 80Hz, that means only frequencies lower than 80Hz will be sent to the subwoofer for playback. That's what the crossover does. However, it's not cut off like a knife. It's not like 80Hz is played by the subwoofer and 81Hz is not played. It doesn't work like that. That's where the -12 and -24 thing comes in. -12 and -24 is the slope of the crossover and it's measured in decibels per octave. So with 80Hz as the crossover point one octave higher, at 160Hz, the volume of the subwoofer will be 12 dB lower, or 24 dB lower depending upon your setting. And one octave higher again, it will play another 12 dB lower or 24 dB lower. One setting is better than the other depending upon the speakers in your system and the type of music you listen to. You can find a video that explains the use of crossovers and slopes on Pioneer receivers here: Please take a few minutes to watch this video. It explains this idea in a lot of detail. kzbin.info/www/bejne/jaetiYyea9uelZI You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@LordDarthSmyth]

Thanks. That helps a bit with my limited knowledge on the subject. I listen to a lot of metal and I find with 80hz and a -24 slope with two ten inch subs makes the kick drums hit a bit more solid. Least it seem like it to me.

[@deckerdotto6035]

It's your system, and the sound that works best for you is the best option to choose. You can learn more about crossover and slope settings in this video: kzbin.info/www/bejne/jaetiYyea9uelZI and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@mannyb.5925]

Does it have a setting for the treble too ?

[@pioneerelectronics]

Modern Pioneer receivers don't have a bass and treble setting. There is a much more powerful sound shaping tool called a graphic equalizer. Don't be afraid of it. It's easy to use. On the Pioneer DEH-S1200UB, all 5 settings in the Equalizer are frequency adjustments. You can use them to make any given frequency a little louder or a little quieter as compared to other frequencies and without changing the volume of the other frequencies. The frequency adjustments are arranged like a piano keyboard with the low frequencies to the left and the high frequencies to the right. If you want more bass, I recommend the "SuperBass" preset. It will add a lot more bass into the music. If you want more treble, I recommend the "Natural" preset. It will roll off the bass, and add in more treble. If you are listening to a ball game or people talking, or an audio book, I recommend the "Vocal" Preset. You can see the presets in this How To video from Pioneer: kzbin.info/www/bejne/kInKZ2CqgdqInrM You can make your own adjustments too. Simply start with any EQ preset that sounds pretty good to you, and make your own adjustments from there. The 50, 80 and 125, frequency bands are typically the bass frequencies. 3.15k, 5k, 8k, and 12.5kHz are typically the treble frequencies. You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@VictorM47]

I have a mvh 330dab and i connected my subwoofer with the blue remote wire but it doesnt work... should i need to setting my autoradio ? Can you help me please

[@pioneerelectronics]

Here is a How To video from Pioneer about wiring your receiver: kzbin.info/www/bejne/oYOVfoJooNx5q8k Operating a subwoofer requires an external amplifier. The Blue/white wire should be connected to the System Control connection on your external amplifier. The amplifier is connected to the subwoofer. Use the Red and White RCA connections on the back of the in-dash receiver to send the subwoofer signal to the external amplifier. You can find more videos on Pioneer's KZbin Channel here: www.youtube.com/@pioneerelectronics

[@pashaboss6]

Can we link our phone wirelessly to it?

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? The Pioneer DEH-S1200UB seen in the video above, does not have any option for wireless connectivity to a phone. Pioneer makes many receivers with built in Bluetooth for hands free phone calls and streaming audio from the connected phone. Please consider the Pioneer MVH-S322BT seen here: kzbin.info/www/bejne/eIXJZauAhKiHrs0 or the Pioneer DMH-WT7600NEX seen here: kzbin.info/www/bejne/hWrciZ2cqr-Dqq8 You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@gaurishk1236]

Please send me settings of subwoofer jbl1200watt increase bass on pioneer stereo

[@deckerdotto6035]

To operate that subwoofer you'll need an external amplifier. I recommend the Pioneer GM-D8701 seen here: kzbin.info/www/bejne/Y4bUY2h9pNRjqbc After installing the external amplifier I recommend setting the in-dash receiver's subwoofer crossover to 80Hz with 12 dB slope. You can see it here: kzbin.info/www/bejne/g6myoGWejbRrrbM Set the EQ to Super Bass. You can see it here: kzbin.info/www/bejne/kInKZ2CqgdqInrM You can learn more about Pioneer amplifiers here: kzbin.info/www/bejne/b2qrl6CZbbarjMU and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@r0y219]

good subwoofer for this radio?

[@deckerdotto6035]

The Pioneer TS-WX1210AH is a great sub for the DEH-S1200UB. You can see it here: kzbin.info/www/bejne/mXqchJmXhauYpKM It depends upon how much subwoofer is good for you in your vehicle. I recommend to get started with a self-powered subwoofer. This type of product has a subwoofer and an amplifier combined together in one product. There are many to choose from with different sizes and power levels. Take a look at this video for more information: kzbin.info/www/bejne/d5zYpJuEis6fjNU You can find more videos about Pioneer subwoofers here: kzbin.info/www/bejne/a3Oyiquuq56fa80 and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@bradendaniel3740]

Mine doesn’t have this it’s really annoying idk what’s wrong with it but it’s the same radio but it don’t have these settings

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? The model number is usually printed on the face of the receiver and starts with the letters DEH, or MVH.