Shop CO2 Boost Control Components motionracework... FOLLOW US: Website: www.motionrace... Facebook: / motionraceworks Instagram: / motionraceworks TikTok: vm.tiktok.com/...
Пікірлер: 39
@alexstaler15 күн бұрын
Thanks for the Inf, Was really helpful.
@freedomfox81832 ай бұрын
This is hilarious I was just looking for a video and found a video from Doug 2 years ago doing this topic 😂...
@RedmistAU2 ай бұрын
Fantastic explanation of why you should upgrade to electronic wastegates.
@nobodyspecial50262 ай бұрын
I was going to say that a CO2 setup no longer makes sense over an electronic Turbosmart WG.
@kanesaw74562 ай бұрын
I have a small compressor and regulator. 130psi in the tank and regulated to 70PSI. I like it better. Then after a run, pumps itself up again.
@ChrisH-yg2ul2 ай бұрын
I got the same but a fitting on my tank to air my tires up if needed
@kanesaw74562 ай бұрын
@@ChrisH-yg2ul Yeh thats a good idea. Might do the same thing
@MorganMayes20 күн бұрын
Can you fill your tank back at the trailer to save the weight of the compressor and wiring in the car?
@sunfigt2 күн бұрын
Great vid!
@MPHMayhem2 ай бұрын
Great Video !!! Keep them coming !!!
@AdinSLaboy2 ай бұрын
Thats awsome video a learn a lot with this video I want that for a Da integra lsv turbo
@nicholasprusko95902 ай бұрын
Great video, very useful.
@jameswilliams-rc9hj2 ай бұрын
Great video guys.
@GBodyGarageRacing2 ай бұрын
Great video Brett!!
@TxHammer7572 ай бұрын
Enjoy the info. What about using E-Gate?
@b3nny902 ай бұрын
Here's a question though, would you choose c02 over the electronic gates?
@v8tergt6532 ай бұрын
If adding co2 on the dome of the wastegate doesn’t give you 1:1 pressure why not mount the pressure sensor on the manifold and than you’d have closed loop boost controller where the ecu would just add enough co2 to get to whatever you’re trying to make instead of chasing your tail trying to find out what makes what.
@low_boost5.035Ай бұрын
Ever think about making a bottle mount for guys not running a cage?
@justinmorris415325 күн бұрын
He said you can use nitrous on the top of the gate? Can you elaborate on that?
@automotivelifestyle8882Ай бұрын
Can you hook the bottom reference line up to manifold vacuum? Ive heard you could, and that it was more consistent then compressor housing. Just looking for insight
@jellybeansupra26 күн бұрын
yes
@racingdatasystems37082 ай бұрын
Can we *please make a billet regulator? I noticed "glow in the dark" gauge faces on the regulator of someones car last week.
@yojiholmesproductions2 ай бұрын
What is everything that you can control with Co2?
@HoodwinkRicky2 ай бұрын
Do two waste gates needs two dome pressure sensors? Or can you run one dome pressure sensor?
@MotionRaceworksOfficial2 ай бұрын
Just one sensor
@HoodwinkRicky2 ай бұрын
@@MotionRaceworksOfficial thanks
@NorthAvenueRacing2 ай бұрын
The Teflon not fittings...can they be reused? If so is loctite or Teflon tape needed?
@brett_lasala2 ай бұрын
It can be reused. If the sealing ring happens to get damaged from multiple reuse, you can use Teflon tape or blue Loctite.
@The_action_is_the_juice2 ай бұрын
What about the compressed air kits I see some cars running? Is C02 more reliable than the compressed air kits or simpler?
@audikid892 ай бұрын
I’ve personally tried this in the past with an onboard air compressor and small tank. The problem is the air compressor, creates moisture, and if this moisture gets into the top of the waste gate, it’s very hard for it to get out. CO2, nitrogen, nitrous, any dry gas will work best.
@The_action_is_the_juice2 ай бұрын
@@audikid89 makes a lot of sense.
@notyouraveragegoldenpotato2 ай бұрын
Water. You don't get moisture build up from c02, compressors build up alot of moisture- even EXTREMELY Bad/quickly depending on ambient conditions.
@mr.c52172 ай бұрын
and to add a comment more amperage draw on the alternator
@audikid892 ай бұрын
@@mr.c5217 good point!
@toddmitchell41172 ай бұрын
What happened to the Nova???
@nicholasblevins75192 ай бұрын
why co2 and not hpa also why not use a carbon fiber bottle
@bryanshaw5212 ай бұрын
I 🤔 La Salla's worked for Real Street? Is this guy rich. Relatively tweeting.
@bradbranum52602 ай бұрын
Hey guys would you be interested in helping me with a small sponsorship to help me buy a 66 nova so I can start racing