Watch as Six Shinez polishes a 24.5 inch Alcoa steer rim in 2 minutes 35 seconds
Пікірлер: 162
@richsimon78385 жыл бұрын
Almost looks fun, like power washing a dirty driveway. Fun for the first 5 minutes that is!
@jonalarcon85645 жыл бұрын
Rich Simon yeah I used to do it at 50.00 a rim
@JREone Жыл бұрын
A true professional at work
@jimbodee40435 жыл бұрын
That came up so much better than I weas expecting it to. Almost felt like it was polished a week b4 and this was just removing the dirt layer.
@gremlin13962 жыл бұрын
But if you look at it it's still very streaky And patchy
@lukenukem11645 жыл бұрын
Top work fella.
@jimdandyishandy48695 жыл бұрын
Only 17 more to go lol
@sixshinez92905 жыл бұрын
jimdandy ishandy lol! Right?
@lex47585 жыл бұрын
U only polish the outside rims...
@Trucker89dude5 жыл бұрын
So technically 9 more 😏
@iamkazie94015 жыл бұрын
@@sixshinez9290 the polishing pad looked purple so I'm guessing was PURPLE METAL POLISH BRAND USED?
@Super_645 жыл бұрын
On a standard dual axle tractor it should only be 5 more... the outside wheels are Alcoa and the inside wheels are steelies usually
@carlspackler915 жыл бұрын
If I didn't know any better, I'd swear he's done that before.
@sixshinez92903 жыл бұрын
Couple times, couple thousand times!
@chuckbrown69942 жыл бұрын
Nice angle of the dangle not burning your edges💪👍
@emonvidaly5 жыл бұрын
Damn robots taking our jobs.
@DALLASONETV4 жыл бұрын
The only way to clean truck wheels brother 💪🏼
@hayyarbrough5 жыл бұрын
What grit of rubbing compound are using..... and thanks for the video again 👍👍👍👍👍👍
@AZsmoothrider5 жыл бұрын
I found this very satisfying to watch..
@sixshinez92905 жыл бұрын
Awesome!
@michaelt76555 жыл бұрын
freaking pro man
@auknix5 жыл бұрын
Thanks for the video. Perfect for a quick cleanup. Our wheels are full within a few weeks because of the mud and salt, so a quick run like this is perfect. Can you do a drive wheel video ? I'd almost think you could put the axles up on stands, put the truck in gear and let it idle. Block the front wheels and leave it hooked to a trailer so it doesn't drive off if something goes wrong then stick the grinder in and give it a shine.
@sixshinez92905 жыл бұрын
Thanks, that exactly what this video was for. I'll do a good one of a drive just so busy lately. I just block the steers, jack up the back rims and take the park brake off. They spin freely, you dont need it running in gear.
@barcelona68014 жыл бұрын
Good job 5 stars 👏👏👏
@ismaelcarrillo39564 жыл бұрын
Remember kids these wheels still have the Alcoa Dura Brite coating. You have to sand them if you want a mirror finish. Great job.
@sixshinez92904 жыл бұрын
Not all rims have the durabrite coating. If you look at the alcoa sticker, if it has blue lettering it is raw, black lettering is the durabrite, and for people who do not know, it is a " clear coat " which they put on to maintain the shine. And thank you.
@lauramurray6690 Жыл бұрын
@SIX SHINEZ your not supposed to try to polish the clear coat ones right? Got a 2 month old truck and dumping a can at the landfill I got something I hope isn't some kind of acid but I can't get it of with soap and a brush and a 4400 psi washer. It's not bad just some spots but it's a front and they are brand new
@gumballer1335 жыл бұрын
The worst part about buffing Aluminum is you get totally covered in garbage. I have the same Shield/respirator setup you have too. Wheel looks great !
@gregdegani4 жыл бұрын
Aussie Rimshine "Hold My Beer!"
@raulnunez28275 жыл бұрын
Cool... Fast work
@carollockhart55535 жыл бұрын
Slightly Hypnotic...!!!!!!!
@kemosabedriv5 жыл бұрын
Excellent work
@sixshinez92905 жыл бұрын
Thank you Jeff!
@kemosabedriv5 жыл бұрын
@@sixshinez9290 your welcome
@billygomez40736 жыл бұрын
How do you do a drive wheel that quick ?
@michaelmacerato88755 жыл бұрын
Where can I find one of those pads the ones we use are like 5 inches
@sighpocket55 жыл бұрын
Nice!!!
@V8RangeRoversGoingNutts2 жыл бұрын
Where do i get one of those pads to suit the 9' grinder?
@notyourordinary104511 ай бұрын
Very nice
@wheatsuperduty3773 Жыл бұрын
I'm thinking about buying alcoa rims for my ford f550. 19.5 Inch. Beautiful rims
@drfox3032 жыл бұрын
What kind of wheel is that? Do you use some type of compound too?
@erichramos91295 жыл бұрын
En Tijuana mi amigo Felipe los pule igualmente y la kedan bien chingones
@rosendorivas13772 жыл бұрын
De cuantas rpm es la pulidora?
@slr379x95 жыл бұрын
dam i wish i could do that. Spend 80hrs just trucking then spend time working on it weekends then you gotta wash it. Shine job quick like that would be the cats ass
@Crawlerjamie4 жыл бұрын
But did you do a good job
@peterjacobs62905 жыл бұрын
I like your technique. It there any way to polish a more intricate 20” wheel for a pickup? The spokes on my wheels are barely wide enough to get a finger in. Thank you 🙂
@sixshinez92905 жыл бұрын
Yes, there is a number of different pads you can use, there is some skinnier ones that should do the trick for you.
@skirkpatrick72805 жыл бұрын
Where we make them at a robot does the work. You can still smell it halfway across the shop.
@jmecillakennedy71026 жыл бұрын
Awesome job,I used to do it by hand..lol
@sixshinez92905 жыл бұрын
jme B thanks man!
@JCA-Z5 жыл бұрын
Great job I've done this too after a while your hand goes numb handling the grinder.
@sixshinez92905 жыл бұрын
If you make sure you're pad is balanced properly it is much easier on your hands
@JCA-Z5 жыл бұрын
@@sixshinez9290 you are most definitely right.
@kennethcraig9766 Жыл бұрын
What dose he keep putting on the polishing wheel
@brandonbarrientos72522 жыл бұрын
What kind of wheel are you using
@hellohumans1755 жыл бұрын
ELD approved
@retireddriver165 жыл бұрын
Nice job
@Skribbles Жыл бұрын
I need this done
@sixshinez9290 Жыл бұрын
Bring er on in !
@Skribbles Жыл бұрын
@@sixshinez9290 I'm in Northern California
@sixshinez9290 Жыл бұрын
@@Skribbles Sweet, get going haha
@100pyatt5 жыл бұрын
Thug Life 👏👏👏👏
@johnsiira94785 жыл бұрын
Yeah buddy fast & good will not be cheap....
@sixshinez92905 жыл бұрын
👍
@Livereater5 жыл бұрын
only 9 more to go!
@sixshinez92905 жыл бұрын
Lol right?
@hasankoseoglu55015 жыл бұрын
Kullanilam malzeme nedir?
@tadheath58565 жыл бұрын
Sweet!!!! What are u using on the pad edge? Tool that is to clean the pad?
@sixshinez92905 жыл бұрын
It is called a polishing rake. It cleans off aluminum and any other debris so you can have fresh polish on the wheel each time.
@tadheath58565 жыл бұрын
@@sixshinez9290 that's what I thought....back in the day I use to use a screwdriver......lol thanks for replying back so fast.
@jdone97745 жыл бұрын
Forgot the holes in rim
@sixshinez92905 жыл бұрын
Jd One Fml
@mastermechanicfelipe46416 жыл бұрын
what products did you use, what type of wheels thanks
@sixshinez92906 жыл бұрын
That is a 10inch purple airway buff and a brown ( Tripoli) jacksonlea polishing bar
@halfmoon50226 жыл бұрын
SIX SHINEZ what Dewalt machine though
@sixshinez92905 жыл бұрын
Oh sorry, that is a dealt dwp 849xp. It is NOT a grinder, it run at 600rpm to 3600rpm.
@desolatesurfer86515 жыл бұрын
You took the nice patina off. WTF man?
@homeisneptune93155 жыл бұрын
How long to get into the biohazard suit? And what about my drive rims??
@sixshinez92905 жыл бұрын
Home is Neptune lol I know right?
@christophertaylor99945 жыл бұрын
Missed a bit 😉
@OscarMartinez-fg8re10 ай бұрын
and the sanding time, to use the other components, the orange and yellow, I am seeing that you are only using the flannel disc, honestly one lasts longer
@carlosescobar53536 жыл бұрын
👍
@lovingmesomeoutdoors87295 жыл бұрын
What are you using for the compound?
@sixshinez92905 жыл бұрын
That is a Jackson Lea brown colored bar.
@eddieordogne6419 Жыл бұрын
What kind of wheel u need to to get that shine how man rpms
@sixshinez9290 Жыл бұрын
Hey Eddie. I'm in the middle of starting an online store with the wheels
@jimstenlund60175 жыл бұрын
All the guys I see doing this just bathe in aluminum dust, no protection, just a gray face, lol.
@Mista_Gee Жыл бұрын
What grinder is that you're using? Thanks in advance.
@sixshinez9290 Жыл бұрын
Dewaltdwpx
@sixshinez9290 Жыл бұрын
Dwp849x
@chinlaiyo95655 жыл бұрын
Got enough ppe
@derricklaster54235 жыл бұрын
What kind of pad he using and at what rpm he running
@sixshinez92905 жыл бұрын
Purple pad but I know like using a red or orange pad. Spinning at 3600 rpm. DeWalt dw849 XP sander/polisher.
@Richard58734 жыл бұрын
@@sixshinez9290 Where do i buy the purple pad You used ?
@ismaelcarrillo39564 жыл бұрын
I counted 3,547 rpms.
@ismaelcarrillo39564 жыл бұрын
@@Richard5873 Purplepad.com
@neiltaylorson6850 Жыл бұрын
What polish do you use please
@sixshinez9290 Жыл бұрын
That video is quite dated, we now use marpol polishing compounds
@Philadelphia191475 жыл бұрын
Always wondered why people were so anal about keeping big rigs so polished.
@baileysherman82512 жыл бұрын
Pride
@lauramurray6690 Жыл бұрын
I have a hooklift dumpster business so the truck and dumpsters is what you see of my business. Mine looks nice the other guys looks like crap I get business like that all the time
@JSBIRD695 жыл бұрын
I'm sure the outer duals don't go quite as fast. I'd be willing to bet, that old boy works by the wheel. I hope you bank that cash son, you may need physical therapy later, after spending so much time hunched over that way! God bless you.
@sixshinez92905 жыл бұрын
Outters do take a little longer, Im going to do one soon and post it.... See how fast I can go, hoping right around 5 minutes.... And a little hard work never hurt no one.
@g98075 жыл бұрын
missed a spot
@dkrink35 жыл бұрын
Are Keds sneakers OSHA approved as work shoes?
@sixshinez92905 жыл бұрын
dkrink3 Haha yep
@jblakec73705 жыл бұрын
Let's see you do that on a rear driver
@sixshinez92905 жыл бұрын
Rear drive wheel I can do in under 5 minutes for sure
@tacomaken155 жыл бұрын
The title say "how to" the description says "watch"👎
@sixshinez92905 жыл бұрын
tomatoes 😎
@budlit18545 жыл бұрын
@@sixshinez9290 tamotoes
@CerebralAilment7 жыл бұрын
What's he using for polish?
@georgealmeida31636 жыл бұрын
CerebralAilment jewelers rouge, different colors are different grit and the buffing wheels are also different for each grit.
@sixshinez92905 жыл бұрын
Think of the rogue like sand paper, each color bar represents a different aggressiveness and will give you different "color" or shine on the aluminum.
@chriscassidy76255 жыл бұрын
He's using zephyrs wax blocks
@robertkurtz75875 жыл бұрын
White rouge which is more for finishing - if you do all the sanding and diff compounds that wheel could come out 10xs better
@tstahler54203 жыл бұрын
Should clear coat them so you won't need to do that again soon.
@brandonruhl45255 жыл бұрын
i do this shit by hand... fuck lol
@vladimirouvarov54162 жыл бұрын
Oh, no 🫢
@highspeedenthusiast66285 жыл бұрын
Quick $100
@sixshinez92905 жыл бұрын
Ziiiiiiiiing!
@justingt3rs5 жыл бұрын
I wonder if his linkedin profile says rimjob technician? ...Stay in school kids
@jakeknelsen23185 жыл бұрын
justingt3rs A buddy of mine makes $500-$1000 bucks per day doing this type of work. He did stay in school 😉
@sixshinez92905 жыл бұрын
You got er Jake! I'll be sure to tip @justingt3rs when I order a Big Mac from his till 😅 !
@jakeknelsen23185 жыл бұрын
SIX SHINEZ Where are you located? I’ll get you to do mine if I ever roll through
@sixshinez92905 жыл бұрын
@@jakeknelsen2318 Up in Alberta , Canada. For sure I would. Thanks!
@jakeknelsen23185 жыл бұрын
SIX SHINEZ cool. I’m in Ontario I was out there for the oil rush of 2014
@lrodriguez93155 жыл бұрын
Instead of buying polish for that truck spend it on new tires.
@MrThisIsMeToo3 жыл бұрын
You must not be familiar with trucks. Tires are almost new.
@lrodriguez93153 жыл бұрын
@@MrThisIsMeToo so u say.
@teucercartearjr98785 жыл бұрын
Y la lijada no mames
@JeeporlandoFL3 жыл бұрын
4 minutes and 12 second.
@sixshinez92903 жыл бұрын
No....
@erickeller19825 жыл бұрын
Don’t forget to clean behind your nuts..... HA HA!!