How To Pool Crete (Pool Krete) Your Inground Swimming Pool Kits Floor by Pool Warehouse.

Pool Warehouse!, Selling inground Pool Kits Online For Over 26 Years!
Click Here: bit.ly/1oH175L Too Shop Our Pool Kits!
Pool Warehouse has been selling swimming pool kits online since 1998 making our company the oldest and largest factory direct inground swimming pool kit company on the internet. Click Here bit.ly/VhV8aj to shop our pool kits!
Finishing the bottom of your swimming pool kits floor can be done in a day.
In this video there are 4 people working on the floor.
1 Person Mixing
1 Person Caring Buckets of Pool Crete
2 People Applying Pool Crete
Total time to Finish the floor was 3 hours.
If you only had 2 people this job would probably take 6 hours.
This is a great DIY video on how to Pool Crete a swimming pool kit from Pool Warehouse. If you have a question feel free to visit our website www.poolwarehouse.com or give us a call at 1-800-515-1747.

[@bobbydennis7925]

This guy is the icing on the cake. He didn't do all the work but he makes it or breaks it. Respect to him. An Artisan!

[@chrispippin1242]

These guys did a great job. From the looks of it

[@SwimmingPoolKit]

How To Pool Crete (Pool Krete) Your Inground Swimming Pool Kits Floor by Pool Warehouse. #poolkits How To Pool Crete (Pool Krete) Your Inground Swimming Pool Kits Floor by Pool Warehouse.

[@SwimmingPoolKit]

Swimming pool kits that have an Aqua Genie skimmer system made by Hydra Pools and sold by PoolWarehouse. com do not require main drains. Please check your local sate/county/city regulations for details to make certain.

[@mrtaktiks]

Don't require but they sure help to clean recess.

[@mikimiki195]

How much water do I use on one bag of pool krete ?

[@wadewilson5296]

A lot of hard work going on there!

[@joelloyd158]

Is it pool krete specifically that mixes so well and buttery looking? The mix looks a lot better than most other vermiculite brands I've seen.

[@jkmurphy3]

Sitting somewhere between back-breaking labor and an artform.

[@junfang3146]

Very skillful.

[@Twinleo1]

Having main drains removed sure seems nice. Skimmers works so well! Between skimmers and vacuuming once in a while, what would be the point of even having them?

[@mrtaktiks]

Main drains cut the vacuum time in half. Had both setups.

[@rudyvasquez1513]

Play what's the cement mix for the outside

[@TheMarpalm]

That was by far the hardest part if the build when we built out pool

[@glassmanforshore7995]

What is your sand to mortar ratio? Plus where are the main drains?

[@matthewvanbenschoten445]

What was in the squirt bottle he was using on the mortar? Assuming just water.

[@blairfright9622]

It’s to help the trowel not pull the material back as you slide the it back and forth.

[@menagerie1066]

Thank you!!! Just what I was looking for!

[@koruush]

main drains have not been being installed for a few years now, many children were gettting pulled down to it, the only way you can have one now is if you have 2 that are t'd together so there isnt as much suction.

[@jaynesadler6596]

Seth Korich v

[@mrtaktiks]

That's why I got more pump hp and to be saf(er), spread drains more than 3' apart, use domed strainers, AND leave the filter off when there are swimmers. I've even had 2 pumps and 2 filters, it's just that I am not a big fan of vacuuming or cleaning the robot.

[@chrispippin1242]

I need my floor refinished. I wonder what the cost is nowadays. In Wetumpka Alabama.

[@chrispippin1242]

It’s a Grecian style 14’x28’. I did some patching on it this year and I put the liner in but I’m gonna have to get the bottom refinished in a couple years.

[@florimbaj]

I need these guys to work in my pool great video and excellent work

[@kevinburke5592]

How come there's no main drains at the bottom of the deep end? I thought those were necessary.

[@mikeallan3710]

Hey Kevin, maindrains are a handy addition however, not necessary. They have rules and regulations that go along with their installation. Most builders now just opt out of installing them all together.

[@coltonhunt4794]

We install main drains on every pool...

[@jayadrian4239]

They are contractors, whatever they could slide with . Shame

[@Dee_Vee_us]

I stopped installing main drains as they are the most common part of pool plumbing to fail and the most costly and time consuming to dig up and replace.

[@c130aviator]

@jay I am having a pool built right now and the main drain is an expense to the customer. The contractors are not taking short cuts by not doing it. They are saving the customer a pricey useless addition. I am a customer that doesn't want it. If the pool needs drained you install a cheap hose to your pump and drain it. New pool owners will think its necessary and it's just silly to blanket recommend it.

[@geraldjansen5434]

thank you !!! after replaster pool walls with mortar 3-1ratio can one trowel a layer +- 6mm thick ?

[@oldtimedrumcorps]

And here comes spot the happy dog to greet the workers

[@nayefalkurahi3357]

wheres the rebar?

[@RonenLin]

So do we need to lower the digging hole by 2" to accommodate the concrete floor or is it calculated in the measurements already? Adding 2" concrete will reduce the panel's height by 2" (since we need to overlap the panel at the bottom) and will decrease the depth by 2".

[@swagdaddy8561]

Yes

[@MrFreewill240]

Very speedy finish it seems. But if you cut corners, you can finish a little faster. Uneven lines, unsquare hopper. etc..

[@zackalali5853]

Would you please tell me what mix did you use in this pool ? Thanks .

[@user-li4gk5lb4f]

So there's no need for rebar reinforcement with this pool?

[@SwimmingPoolKit]

Not on the floor of a Hydra Pools steel wall or polymer wall pool kit!

[@gtdsdaddy1]

Is Pool Krete the same as Vermiculite?

[@sharkson7725]

gtdsdaddy1 yes

[@I2aMpAnT]

For reference, what size pool is this?

[@kevinkevin9448]

What is the coverage per bag and can I order it form pool warehouse ???

[@SwimmingPoolKit]

Hi please find more info on coverage area here: www.poolwarehouse.com/shop/pool-krete-pool-crete/

[@Jennypherz12]

How long did it take for them to do this?

[@SwimmingPoolKit]

this was done the same day!

[@gtdsdaddy1]

I have an 18'x36' in my back yard. It's been empty for 6 years now. Of course the liner is toast. The pool-crete has busted up and needs removal. I'm working on cleaning out the weeds and getting it ready for refinishing. I'm a little apprehensive about taking this on because of the unknown. Any tips for a scaredy-cat?

[@CrazySon]

gtdsdaddy1

[@wadewilson5296]

Are the polymer sides better than the steele?

[@thetruthisonlyperspective4872]

Fuck no

[@claypot10]

Yes

[@metalmastersc]

If you're in an area with consistent ground water or rain. Steel sides are fine out west where the ground is pretty dry or in gravelly soils where there is lots of drainage. I'm in Maryland, we did ours 7 years ago with the poly after the steel sided one that was here failed from rust, but our environment is humid and has some salt in the air between the Chesapeake and the Atlantic (Eastern Shore next to Delaware).

[@wrkhrse]

How can you make this without using a level?

[@jessybwoy8677]

it doesn't have to be that accurate. You're not finishing a slab on wich you gonna raise a building...

[@dwaynejava]

The ground us graded as level

[@johnwayne5069]

Why arent you using reinforcement?

[@SwimmingPoolKit]

Hi John, this is not a concrete pool and does not require re-bar on the floor of the pool.

[@johnwayne5069]

@@SwimmingPoolKit what kind of mix did you use?

[@johnwayne5069]

@@SwimmingPoolKit but then again that is just great and thanx for the vid.

[@Sazonman]

He's suppose to apply Crete up to 2 inch through to the entire lower bottom of the pool walls...the indication line is at the bottom of every wall panel...I don't see him doing it the correct way.

[@koruush]

i havent installed one in over 4 years.