How to Port Nissan 370z (Upper & Lower) intake manifold 🛠 ** Update 08-2020 **

[@runemproduction3187]

Hell ya bro thanks for the video. I just ported my upper manifold thanks to your video and a few others. I finally built up the courage to just go for it and I'm glad I did after about 5 mins I felt like a pro. I subbed

[@TriggaM]

💪❤❤❤

[@CiccccciO]

This is dope dude, you just saved VQ owners quite a bit of money. Gonna do this to my G when the snow goes away, nice little summer driveway fun

[@TriggaM]

My pleasure

[@bandidomxgarage7898]

Radicas en cali ?

[@Marcos0ne]

I really want to port mine but I also don't want to have my car apart while I'm doing the work in case something happens and I mess them up or can finish. I may just buy the power pack from you.

[@TriggaM]

Your best bet is buying my kit my dude. Makes the process easy. And you get a tested and properly shaved and ported manifold set with my 75mm tb kits. And il also buy back your stock set later when you have it off. I pay typically 150 to 165 shipped for the stock set.

[@wizkhalifa323]

@@TriggaM where are you located bro?

[@TriggaM]

Temecula CA

[@brycedickson6367]

Love the set that you modified for me brotha! Smooth transcation, great doin business with you!

[@TriggaM]

Thank you so much for the review & for your business my brother 🙏 ❤

[@torvarrisevans3961]

Hey bro , Did you notice any gains from the ported plenum manifold, am thinking about it as well.

[@snakes5506]

Always do the gold stuff you the man brother 💪😎

[@TriggaM]

Just for you 😘

[@Cybuch44]

How much of the material do you take off on average from both lower and upper manifold? 1-2mms?

[@TriggaM]

That information varies set to set. They aren't all the same

[@ryanscanlan9875]

Hey Trigga. My HR has ported upper & lower(stock injectors), do you think I'm better off with the Big Throttle bodies or ported VHR upper & lower. Can't afford both.

[@TriggaM]

Hit me up il hook you up with a killer price for the TBs. If you have a ported HR set you don't need to switch. The HR still makes plenty of torque with tbs and ported manifold. And it's much simpler

[@bigdogstreetperformance6761]

You do nice work my friend!

[@TriggaM]

Thank you 😊, if you ever need some work done your self plz just lmk 🙏

[@jonathanlay2005]

Does porting make a noticeable power difference? Like how much whp can you gain

[@TriggaM]

Car to car varies but typically these you see alit of mid / top end be gained with tons of torque

[@jonathanlay2005]

@@TriggaM Gotcha because i’ve been eyeing down the upper/lower plenum you sell but just don’t know how beneficial they are

[@TriggaM]

Very Ask around I've sold lots of them. They work very well

[@jonathanlay2005]

@@TriggaM Appreciate you answering. I’ll probably buy a pair then. Look out for my name on orders lol

[@TriggaM]

When ready just shoot me a Dm or email @triggaspec [e-mail]

[@elcolin_]

Love the video and the project. Props to all of us DIY guys. Question though: doing it manually at home by hand... my concern is that you'd end up with slightly different sized ports just due to human error and "eye-balling it". I wonder if there is any way to measure each port to make sure they're as close to identical as possible?

[@TriggaM]

Each one that is done is measured and brought to near %5 accuracy of each other. I've done so many manifolds now. Just not lexus. But yes all are same and even to one another

[@Go714Hernandez]

After u ported the lower and upper plenum and installed, does the car need to be tuned?

[@TriggaM]

Not needed to tune right away. But yes eventually you will want yo grt s tune to get the Max results. When no tuned you can drive the car and do all the stuff you would normally. Just don't best on the car too much till it's tuned

[@Go714Hernandez]

@@TriggaM who do u recommend for the tune? I live in the High Desert

[@TriggaM]

instagram.com/saul_nismo_knights?

[@TriggaM]

His my tuner and if your in cali I recommend him

[@Turtlefarm]

Buying a ported lower intake manifold.. but i Wana add a spacer, can I do this without having issues re-installing the fuel rails with a spacer?

[@TriggaM]

Correct! You won't have any issues. You might need a longer front and back stud. Which I can provide you if you buy a manifold set from me

[@Proasff]

What air compressor do you use I Baught a 240$ husky 20 gallon tank and it would last 60 seconds than pressure would drop than I would have to wait for the air compressor to build air again made the process longer I noticed you just kept going at it no problem

[@TriggaM]

Maybe lower your pressure for the tool.

[@Proasff]

@@TriggaM I had it at 90 psi wbu ?

[@TriggaM]

130 to 170 But my gun varies

[@Proasff]

@@TriggaM so you think the tool would play a big factor in the tank itself not holding the pressure what tank you got boss if you don’t mind me asking

[@lospitufos8890]

@@TriggaMhey do you still port them?

[@fernandohood5542]

What percentage increase in airflow does the flow bench say after the porting.

[@TriggaM]

About 20 to 25% depending on the port! Since they are all hand ported it can very but they are range in that percent range

[@fernandohood5542]

@@TriggaM That was a trick question by the way.

[@TriggaM]

Trick qustion 😂😂 okay.....

[@rustypwnismo7384]

To make your burr bits last longer and not load up with aluminum. Dip them in ATF fluid before you grind with them.

[@TriggaM]

Wow rusty thank you for the advise 🙏 I will try that on the next set I do this week! I've been also using alot more sanding wheels ( Christmas tree looking thing) they seems to help and clean up the final finish! But I will try this trick! Thank you so much 🙌🤝💪❤

[@1MADZ]

Bout to do this on my Cammed Z

[@TriggaM]

Your gonna love it

[@370Z-t5v]

I just started doing mine a few hours ago but I still don't have it too clear so you basically have to get rid of all the bumps? Or is they're like a certain measurement you have to get it to or how do you know when it's done?

[@TriggaM]

It's hard to say since it's all muscle memory for me & proper tools. I could t tell you till I saw it. Becarefull with thr bumps. Shaving those off can sometime cuase crack in manifold

[@370Z-t5v]

@@TriggaM ok bro thank you 👍

[@bandidomxgarage7898]

Esos tokes de mari…..estan bien chingones 😂😂😂😂

[@TriggaM]

si vivo en cali! si desea un conjunto u otros productos... no dude en ponerse en contacto conmigo

[@icesalami]

how much for upper and lower mains on vq37? how much for the ported tbs

[@TriggaM]

Manifold set alone $650 shipped With tb Better know as power pack combo $1100 shipped

[@user-fj5ul9ci7d]

How long does it take to do the upper and lower?

[@TriggaM]

Typically zero wait time, I have tons in stock. But if ordered at busy time, it takes 2 days before it's shipped

[@user-fj5ul9ci7d]

@@TriggaM my bad shoulda specified that im going to do it myself most likely lol was just curious how long. Nice work man appreciate the video.

[@xBRYANx213]

Is it basically the same as the Z1 ported manifolds?

[@TriggaM]

Not same but yes I guess same concept. My manifolds are ported to a bigger degree as well the runners are fully ported! Unlike others they only do about %40 of the way through the runner 🤷‍♂️. Not here tho I do the full runners and as well for the lowers I do injector bump delete with the upper bump delete, for a full smooth pass through the runners. My manifolds are best in the market bro 👌 no doubt 100% guarantee 👌 😎 💪

[@icesalami]

@@TriggaM what’s your contact info? i’m tryna get mine done

[@TriggaM]

Ether Dm me @notrigga or @TRIGGASPEC Or Email me [e-mail] And I got you my dude

[@torvarrisevans3961]

Nice bro , can I still drive my car after porting my manifold. And will I notice a difference after the install , or I need a tune

[@TriggaM]

You can drive it with no issues and you will feel the difference. Car might run a bit lean which means more gas consumption but that's normal due to the extra air. But over all no issues. When you get tuned you will then feel the full gain.

[@TriggaM]

Lower will help out but main thing after in tune. Depending on your injectors size you might need to up them but rare if your not cammed

[@torvarrisevans7254]

@@TriggaM thanks

[@torvarrisevans7254]

Hey bro , does z1 coil pack makes a difference in performance over the oem coil pack

[@TriggaM]

Oem is best nothing less

[@PResmejor]

Hey brother , do you have an IG? Love the content btw ! 🙏🏽

[@TriggaM]

You the best And Yes here you go @notrigga @triggaspec

[@PResmejor]

@@TriggaM thank you for the response brother ! Your content has helped me a lot and inspired me as well ! 🙏🏽🙏🏽🙏🏽

[@TriggaM]

Hearing those words make my day man 🙌🙌🙌🙌🙌❤❤❤❤

[@BunnyBUNGALO]

Do you have a website

[@TriggaM]

I do Triggaspec.com Currently being re designed so for all orders. You can contact me directly Ether email [e-mail] Or Instagram @Triggaspec

[@BunnyBUNGALO]

@@TriggaM do your prices include the intake manifold or are they just porting services? How much is the intake manifold worth on its own?

[@TriggaM]

@@BunnyBUNGALO the price you see is a for a full kit. Upper and lower both ported with new hardware for installation Please for more info Ether email me or DM me

[@dannys69]

how much do you charge?

[@TriggaM]

As of now VHr set are 675 & HR sets are 575

[@sachadagnino9675]

for a 370z

[@TriggaM]

Yes sir 💪

[@bulletis3503]

You only can port VQ’s manifolds ? Or would you be willing to do a Lexus is350s manifold ? I’d ship it to you.

[@TriggaM]

I can do it msg me and let's get it done 🤝💪

[@wheeli1612]

How much for me to send you my lower manifold and have you either port it or send another ported one my way

[@TriggaM]

Please if you wanna do that contact me Via Instagram @notrigga but for a ported lower it would be 200 only if you trade in your stock one. So that works ether way you like, ether wait 2 days and I port your own or you just take a new ported one and i keep the stock. Let me know what you wanna do. Please on instagram so its easier to communicate

[@mandegarkitchen1042]

👍👍👍👍

[@TriggaM]

❤

[@sachadagnino9675]

How Much for an upper and low shipped to England?

[@TriggaM]

$650 shipped! Shipping international sometime cost more but I will take care of the extra cost for you like I always do when I sell international! Take it as a Complimentary service for the customer 💪. Please let me know if you like to place order. I currently have 1 lower and upper thats fully ported ready to go 😉🛫. If insta is easier for you mine is @notrigga

[@sachadagnino9675]

@@TriggaM Great thanks bro moneys a little tight with this hole covid BS going on right now. but will deffinitly order them ASAP. will contact you on insta. Stay safe and keep up the good work.

[@TriggaM]

We can work out a deal for you my dude! Jut hit me up and we make it happen whenever 💪

[@sachadagnino9675]

@@TriggaM Thanks bruv will do.

[@my93foxmustang1]

where you located at bro? I dont have any social media but im interested in porting my upper and lower for my 370z

[@TriggaM]

Temecula CA You can always email me @ [e-mail]

[@my93foxmustang1]

@@TriggaM Im in Sacramento. How much would it cost for upper and lower?

[@TriggaM]

So you have ether 2 options! Option 1 : you can purchase a ported manifold set ($650 shipped to your door🚪😀) & then install them and resell your own stock cores. Option 2: (mandatory deposit $100 needed at start & rest can be payed when job is done) you would need to take your own manifold off, package 📦 them up and ship them to me for a port job. You Will also need to include a return label that I can use to send it back to you when job is done and payed in full! Option 2 is only $400 since you are supplying the core. So 400 plus 2 shipping labels 🏷 . Read this over & if you wanna continue let me know and we can arrange it

[@dom_z3480]

I got a dyno run today

[@TriggaM]

💪💪💪💪

[@aaronthemartialmechanic893]

How did it do

[@dom_z3480]

@@aaronthemartialmechanic893 man 😂 z1 intakes 34 row oil cooler , tomei aam y pipe , I made 317hp 270 tq

[@dom_z3480]

@@aaronthemartialmechanic893 later down the line I got art pipes and fortune auto coil overs. Retuned for 355hp and 280 tq

[@dom_z3480]

@@aaronthemartialmechanic893 then I crashed it. Bought a wrx, gas was like 6.00 so I bought a Tesla, next car I get will be a z 💀 life story sorry.

[@brandini2557]

How much would you do mines for

[@TriggaM]

Please if you have ig dm me @triggasped Or Email me ( [e-mail]) to get a quote

[@henryace24]

How much for just the upper manifold

[@TriggaM]

330 shipped

[@henryace24]

Nice I messaged you on Instagram bro

[@gianlucare3319]

Ma compratelo un cazzo di tavolo....