How to Prep Bad Paint for Wrap: 1991 Toyota MR2

[@bruceduece22]

You have inspired me to do this. Just received my wrap today. Shaved my door handles last weekend. So stoked

[@cindysorokowski2667]

I just came to watch your video for tips on my 2005 spyder. I previously laced the vehicle and it looked great. I wanted to have it wrapped and was told that the paint finish wasn't good enough. I find it funny I'm watching your video and and you have a spyder sitting in the background exact year and color as mine.

[@ParadoxTheWrapper]

Just sand it smooth and wrap it

[@FaderSkate]

Just what I needed to see my car has damage in the same spots and I’m about to wrap

[@flippusgarage7417]

Love it. And love the little piggy.

[@PorscheV8]

I had to sand off all the bad clear coat off my bumper...learned the hard way...wrap looks great

[@kinda.careless6835]

Did you need to clear coat over it or a primer? If not did it come out good ?

[@TheKiddOnDrums]

Did it stick well over the base coat or did you clear it again?

[@gangweed9979]

Bout to start sanding down my c4 after it got hit and run, it also has many chip spots. I bought the metallic gloss midnight red from ur shop too, can’t wait to start next week.

[@ParadoxTheWrapper]

Nice! Thank you so much for supporting the channel!

[@miketdarnell]

Post some videos of your experience wrapping the the c4

[@OverkillEverything]

Loving this as usual

[@shiftwrenchrepeat]

Keep up the good work man! so many niches in the automotive world and you're awesome at yours! Love the videos! #shiftwrenchrepeat

[@ParadoxTheWrapper]

shiftwrenchrepeat thanks for the support!

[@shiftwrenchrepeat]

No problem man! We godda support each other in the automotive KZbin community!

[@KB-ip6ji]

Thanks for the informative video! The chicken was icing on the cake!

[@ashtonh991]

I love seeing the 3G in the background! I had a junkyard RS, but just upgraded to a GT in much better shape. But some panels were changed and the greys are just off enough that I think paint correction will make it obvious so I'm thinking of getting her wrapped! Do you have any advice??

[@dellyboo01]

I got A 1991 Toyota Celica lift back... and the paint job is up-to-date , fully reconditioned so on so forth. This has given me an idea for my car.

[@olliej914]

got an 82 mustang gt. paint is horrid on her.. however bodylines all match up.. wondering if i can get away with a wrap instead of all the body work blocking and priming that is needed thanks for the vid.

[@MrSwagMcmuffin]

Just to be on the safe side , wrap can go over primer ?

[@doomsday751]

What sandpaper grit do you vinyl wrap over?

[@siavasherami6071]

how much vinyl did it take to wrap the mr2?

[@thestig560]

At 9:10 your MR2 looks like it has one light from a 300zx and it looks pretty dope! 😃

[@sofia96]

I have paint chips on the hood of my car , should I sand the whole thing ☹️

[@vincentmeredith2561]

I feel bad for you guys in Cali with those exhaust issues over here in Colorado I don't even have catalytic converters on one of my cars and the cops don't care at all

[@Nathan_Jay]

Even in Illinois, cops told me I should straight pipe my previous car (not that they didn't do it to their own personal vehicles)

[@permanentvacation2406]

In Louisiana no cat catalytic converters no mufflers no problem

[@alonsogarcia6505]

Yup. Cali is terrible with this.

[@zaybanks634]

How did u pass smog in Colorado , my cats are aftermarket and the light comes on because of it,

[@vincentmeredith2561]

@@zaybanks634 no emissions testing in El Paso county

[@juarzzzz]

I have a ram truck im going to be wrapping but the hood has a lot of cracks how should i approach

[@AlexB-ul2rl]

Is this worth it the sand just for a wrap for resale when youre not looking to put a ton of money in it to fix everything?

[@goodvibestv5380]

This dude has an everlasting smile

[@slow3.756]

Can you wrap a car hood that dont have primer on it?

[@strana6875]

I want to wrap my car, but I have some paint chips just in one spot on two doors. If I spot fix those, would I, as a beginner, have to worry about the wrap? Both how it looks, and when I remove the wrap down the line, the paint potentially flaking off?

[@Pinkielover]

Back in the day with my choice of car was the MR2 this body style or the rx7 I ended up getting rx7 GEN two

[@bababooey1234me]

really helpful thinking about wrapping my 3000GT vr4 it needs a paint job or wrap really bad

[@felipedeleon550]

Is it the same procedure with bad paint if I want to plasti dip my truck

[@rstezza]

What’s the name and brand of the dark red colour at 3:44?

[@KRIPI-ud6yx]

what would you charge to wrap a olds starfire wrap provided

[@christiamsaldarriaga3831]

Where did you purchase that vynil?

[@porsche962lemans]

Question sir. I just did exactly what you did to my trunk but my wrap looks awful!? It has this glaze to it to where I though I needed to put quick layer of gloss spray paint on it first. Do you primer the sanded parts before you wrap? I wrapped my hood that didn’t need sanded and it looks great.

[@xaviersjordans2331]

Whenever you primer the area you have to re-sand again to make it smooth but without sanding off all of the primer then you can wrap it and it should be a perfect finish

[@josuerodriguez8888]

Where do you buy your films from? Is there any price difference from what you get than what the public does? I’m only asking cause you’ve inspired me to take Wrapping Courses through 3M starting small and eventually open more to the public

[@jasonking9903]

Do you have to use primer or can you wrap over the body filler?

[@elenadominguez7101]

You can’t wrap it on bondo the wrap won’t stick at all you have to deal of with primer

[@billjones8608]

Did you predict covid19 a year ago with the hint at getting a respirator?

[@recheveste31]

I dont get it.

[@Rafael-Sanabria]

He just watched The Simpsons 👀

[@tb2565]

Hey man wanting to wrap my MR2 and I love this colour, have you got a link to the product you used?

[@petermillar5302]

T B 3m has a solid line with decent selection

[@randompost8121]

did u wrap it under 220grit sndpper ??

[@C10AZ]

A bit late to the thread here. I have an issue with the hood of my 4Runner. Clear coat has flaked off in a small area behind the hood scoop and I've been told to repaint entire hood before I wrap it. One wrap shop quoted me a couple grand to sand it. What grit sandpaper should I use and do it myself?

[@ParadoxTheWrapper]

400 is good

[@SweetWrapsGarage]

use some krud kutter next time for your rust it removes and protects from rust, use it on my 1970 mustang and my steel tools

[@ParadoxTheWrapper]

Thanks for the tip!

[@JSUTI1995]

You have some nice rides bro ... no doubt ... great work!

[@ParadoxTheWrapper]

Thanks!

[@Jdriven999]

My paint is like that, so i dont have to prime it before wrap just sand it smooth?

[@SHILLGATESCRYPTO]

I wish I lived near you.

[@user-bx9ke5cx6o]

What’s your thoughts on an old car paint in good condition with some chips in paint could I just wrap it as is?

[@A-moose1234]

The pig lol that was great.

[@mattfarmer8053]

I love how I clicked on this video for my truck and then see one like mine in the background😂

[@kingtazler2571]

What truck u got

[@arredondojori]

What do you recommend if it's just light bubbles on the paint? What grit should I use for just the clear coat.

[@CosmicTarot333]

cool looking miniature pony

[@sirhcmi3]

I hoped this worked out being 5 years ago, but if you only primered the base metal then you likely have rust by now. Primer doesn't seal anything. You have to top-coat it to keep the water out.

[@MA-fk5ot]

How much was the wrap ?

[@rafaelbarrientos8212]

LMAO first time watchin your videos.. listening carefully.. pig just comes out the blue... 🤣🤣🤣

[@itsreamo]

Please reply lol I know it’s old video but so I’m good just doing the whole car in 220 grit? Nothing finer to make it smoother. ?

[@Ls400Saint]

What grit did u end up using ?

[@mitigga]

Where u at in cali ?

[@BPoweredLove]

I see my man dry sanded. Is there a quick explanation as to why dry sand vs wet sand? Thanks!

[@ParadoxTheWrapper]

As long as it’s smooth it will stick

[@puddentaine]

@@ParadoxTheWrapper im looking into wrapping my car. So it will stick even to the primer and sanded paint? How long has it lasted? My paint on the hood is getting chalky.

[@keithrx3c]

What breed of dog is that? :P

[@cblizay1165]

Damn I came to this video wanting a wrap but It instead got me wanting a pig now 😂😂

[@MrDizaier]

Same proces for fiberglass bumper???? Sanding with primer or just sanding [ xxx grip]

[@ParadoxTheWrapper]

Yes just make it smooth

[@TheKiddOnDrums]

@@ParadoxTheWrapperso just sanding or primer?

[@DeeWadeSoundz]

Wat camera you using ?

[@ParadoxTheWrapper]

Dee Wade I phone 11

[@DoozFam]

7:43-8:05 was for me bro, but i was too late, wrap ruined.. i gotta work magic now😂

[@ymardoublem4651]

Link to business that you get your rolls from ??

[@ParadoxTheWrapper]

Teckwrap.com

[@anaiesabina]

the piggy stole the show hahah omg love it

[@Apple08Guy]

So there was no problem wrapping over a sanded area? No need for a wet sand? The wrap sticks fine?

[@ParadoxTheWrapper]

Ya been on there for three years

[@SGaminggOfficial1612]

Can you wrap right over sanded paint ?

[@ParadoxTheWrapper]

Yes

[@SLYDIT]

What grit paper? 200? 1200?

[@ParadoxTheWrapper]

400 is good

[@6ixthstage845]

subbed for pointers when I do my cars :)

[@kevbec7069]

link to vinyl

[@ForestFire2142]

where do you buy your wrap from?

[@ParadoxTheWrapper]

ParadoxStyling.com

[@zacvogan3000]

can you leave a link to where you bought your wrap

[@ParadoxTheWrapper]

Yes you can get wrap from ParadoxStyling.com

[@saeedm6363]

Man I got an MR2 that looks just like this but it’s black

[@stealthynoodle2707]

OMG CUTE LIL PIGLET

[@bradyrobinson9338]

Omg that piggy is so faaaaaaat😩 fucking adorable

[@jsimmonstx]

RE: exhaust - Move to a free state.

[@rapidmist2414]

Still watching but Hamilton stole show for me 😂

[@TooDiffRell]

Where u ordered wrap from

[@ParadoxTheWrapper]

ParadoxStyling.com

[@CombinationGamerFireskull]

Honestly kind of viven with the weathered paint. Look after you sanded the whole thing

[@trig8364]

everyone does!

[@Fishin480]

4:59 he was close lol

[@frannyfisher8734]

Came for the tips, stayed for the pig

[@ParadoxTheWrapper]

🐖

[@frannyfisher8734]

Was that.....a..peacock?

[@damianserret8263]

This is why I’ll never move to Cali.

[@ivangarcia9352]

Sad. I have to sand my whole car to make it all even .-. Might even have to use a bit of bondo and the car is only 9 years old

[@jacobjordan2732]

I am the first to know

[@shadowikr2457]

4:00

[@DaSNoble]

Hope you still have that mask today!

[@eduardoperez7797]

Got to love a government that doesn’t let you enjoy the things that cost you and for what you pay taxes thats the reason I left California never to go back lol

[@lindascraftcorner5898]

You too

[@Bzzz2000]

Like to the pig!!

[@jameseasterday8362]

so, i think i just asked about this in a different video. so please disregard that comment >.

[@birdbangbobaruni]

Car was leaking

[@gabe6152]

Or Covid apocalypse 😭😭

[@Atrociousa3]

That’s a weird looking dog

[@chanoybrown7419]

Respirator for covid

[@JasonStevenson72]

Your music volume was 10x your voice... need to bring it way way down...

[@LordWassie]

The pig hahah

[@SleuthHustler]

OMG its a PIIIIIGY

[@jvst20051]

Law? thn remove from the seat who Ever passed that stupid law you voted for them get them out

[@bcxaz]

Why would anyone live in a state where literally their freedom is totally compromised and not speak up or move out of that state?

[@pyrocl0]

Right...why would someone comment about "freedumb" on a video about prepping a car for vinyl? Shit is shocking!

[@bcxaz]

@@pyrocl0 obviously you are too young to understand freedom is never a given and wait and see how dumb it is when it is taken away causing you to lose property or even livelyhood. My comment stands and your reply will nkt age well i assure you.

[@g.o.dspeed9759]

Exactly. But nick is so fast to voice his concern to you but not the state😁

[@lieutenantpliskin]

​@@pyrocl0 do you have a issue with freedom or somthing?

[@spiderman-vd7kq]

@@lieutenantpliskinthe thing is this video isn’t about freedom it’s a video showing us how to prep for wrap

[@anastacioramirez2295]

When are you gonna eat the pig?

[@jimstaszko1675]

LMAO, The People's Republic of California.

[@mr.realistic9791]

Cali car scene is lame to many laws

[@hsinyo]

Wrap is like a woman with makeup

[@ParadoxTheWrapper]

Lmao don’t tell you gf that, the one you got in your profile pic

[@hsinyo]

Lol you got me 😂😭

[@JoMammaSmurf]

Move out of california. Worst state in the country. Move to FL. You can have your farm, cars, guns beaches, everything... and for 1/4 of the price. We're all about freedom here!

[@squrilebrain]

you need to learn the right auto language. if you are going to use a DA sander use an air compressor that can run an airpower DA sander that has a high CFM on the air compressor you need 4 or better at 90 psi and 6 or better at 40 psi. an airpower da sander runs at 90 psi and if you have a small tank it will run like a slug or just cut out all togetherr