How to prepare EG (Engineering Graphics) Tamil | Special Lecture 2 | Overview | Preparation Tips

EG (Engineering Graphics) is a technical drawing subject provided in all engineering students' curricula. A special lecture 2 is delivered in this to discuss the overview of the subject and preparation tips for the exam.
So, watch this Tamil video @SM EDUTALK to know how to prepare EG.
For more videos about Engineering Graphics in both Tamil & English,
Click the following link to enter into the Channel Page :
cutt.ly/smedutalk
Follow me on Instagram :
/ sm_edutalk
Make me your friend on Facebook :
/ malligarjunan.s
Projection of Solids (Tamil) | Part 4 - Problem |Lecture 10.4 |Engineering Graphics |Cube
• Projection of Solids (...
Projection of Solids (Tamil) | Part 3 - Problem |Lecture 10.3 |Engineering Graphics |Hexagonal Prism
• Projection of Solids (...
Projection of Solids (Tamil) | Part 2 - Problem | Lecture 10.2 | Engineering Graphics
• Projection of Solids (...
Projection of Solids (Tamil)| Part 1-Intro & Drawing procedure | Lecture 10.1 | Engineering Graphics
• Projection of Solids (...
Projection of Planes (Tamil) | Part 5 - Problem| Lecture 9.5 | Engineering Graphics|Hexagonal lamina
• Projection of Planes (...
Projection of Planes (Tamil) | Part 4 - Problem | Lecture 9.4 | Engineering Graphics
• Projection of Planes (...
Projection of Planes (Tamil) | Part 3 - Problem | Lecture 9.3 | Engineering Graphics
• Projection of Planes (...
Projection of Planes (Tamil) | Part 2 - Problems | Lecture 9.2 | Engineering Graphics
• Projection of Planes (...
Projection of Planes (Tamil) | Part 1-Intro & Drawing procedure | Lecture 9.1 | Engineering Graphics
• Projection of Planes (...
Projection of Lines (Tamil) | Part 5 - Problems | Lecture 8.5 | Engineering Graphics
• Projection of Lines (T...
Projection of Lines (Tamil) | Part 4 - Problems | Lecture 8.4 | Engineering Graphics
• Projection of Lines (T...
Projection of Lines (Tamil) | Part 3 - Problems | Lecture 8.3 | Engineering Graphics
• Projection of Lines (T...
Projection of Lines (Tamil) | Part 2 - Problems | Lecture 8.2 | Engineering Graphics
• Projection of Lines (T...
Projection of Lines(Tamil) | Part 1-Introduction & Drawing procedure | Lecture 8.1| Engineering Graphics
• Projection of Lines (T...
Projection of Points (Tamil)| Part 2-Problems | Lecture 7 | Engineering Graphics |Dr.S.Malligarjunan
• Projection of Points (...
Projection of Points(Tamil)|Part 1-Introduction & Drawing procedure| Lecture 6 |Engineering Graphics
• Projection of Points(T...
Theory of Projection Part 1-Introduction(Tamil)| Lecture 4 |Engineering Graphics |Dr.S.Malligarjunan
• Theory of Projection P...
Orthographic Projection (Tamil) | Theory of Projection Part 2 | Lecture 5 | Engineering Graphics
• Orthographic Projectio...
Dimensioning (Tamil) | Lecture 3 | Engineering Graphics | Principles | Methods | Dr.S.Malligarjunan
• Dimensioning (Tamil) |...
Line Types & Suitable Pencils (Tamil) | Lecture 2 | Engineering Graphics | Dr.S.Malligarjunan
• Line Types & Suitable ...
Frequently used terms | Engg. Graphics | Must watch video| Tamil medium students| Dr.S.Malligarjunan
• Frequently used terms ...

[@jairoyalmech2997]

கோடான கோடி நன்றி தலைவா கோடான கோடி நன்றி❤️ உங்களுடைய பிளான் அப்படியே வந்தது தலைவா மிக்க நன்றி காலேஜ் படிக்கிறவங்களுக்கு முதல் ஆசிரியர் யூட்டிப்

[@SMEDUTALK]

மிக்க மகிழ்ச்சி! நல்ல மதிப்பெண்களுடன் தேர்ச்சி பெற வாழ்த்துகள்.

[@udayakumarmohan667]

Very nice Explanation. sir

[@SMEDUTALK]

Thanks and welcome

[@yogaprakasam892]

2day my semester. It's really useful shortlist for portions sir thank u sooo much

[@SMEDUTALK]

Most welcome. All the best for your exams.

[@vls415]

So tq sir and make it video for most respected important sums

[@SMEDUTALK]

Sure 👍

[@berlinbenita217]

Very useful for explanation sir....

[@SMEDUTALK]

Thanks and welcome

[@user-tz9um3lv8o]

Nice explanation clearly understand

[@SMEDUTALK]

Glad to hear that

[@syedmusfirj8505]

Useful for my future

[@SMEDUTALK]

Glad you think so!

[@ramasrijramasrij4417]

Thank you sir..💯👍

[@SMEDUTALK]

Welcome 👍

[@vvyy2394]

Tharamana video😇

[@SMEDUTALK]

Thank you

[@jparthaSarathi-xw9xl]

Thank you sir 😊😊

[@SMEDUTALK]

Most welcome

[@thebigchance7530]

NANDRIGAL❣️

[@SMEDUTALK]

மகிழ்ச்சி!

[@MariyappanpMd]

Thanks sir....✨✨

[@tktamilan45]

Thank You Sir ❤

[@SMEDUTALK]

Most welcome

[@Shangkari-zt9dw]

Thank you sir

[@SMEDUTALK]

Welcome

[@arvinthvibes237]

Thank u sir💞

[@SMEDUTALK]

Most welcome

[@user-fu3xx7ot2w]

Thank you❤🙏

[@SMEDUTALK]

You are so welcome

[@aishu4980]

Thanq u so much sir 🙏🙏🙏🙏🙏

[@SMEDUTALK]

Most welcome

[@user-tz9um3lv8o]

Nice explanation clearly understand

[@soniyasekar283]

Thank u sir

[@SMEDUTALK]

Welcome. All the best for your exam.

[@maddymaddy7540]

Keep doing sir it will be helpful to all

[@SMEDUTALK]

Thank you, I will. But, fewer views make me to think "my effort has gone in vain".

[@viennalifeithuemptylife6412]

@@SMEDUTALK no sir your effects are very useful sir

[@SMEDUTALK]

Thanks. Please share and like the video.

[@viennalifeithuemptylife6412]

@@SMEDUTALK already liked sir

[@viennalifeithuemptylife6412]

And shared sir and welcome sir

[@pmpriyapmpriya2818]

tq.

[@SMEDUTALK]

Welcome

[@aishu6653]

Thankyou So Much Sir. Arrear pasangaluku thani tips and tricks Videos Upload pannunga sir.

[@SMEDUTALK]

I've explained everything here. All the skippable portions and easy portions are enlightened in the video. Arrear students can focus on that easy portion and skip the tough parts. Never attend only 2 or 3 questions. Attend all the questions (Even you don't know, just try to get grace marks) or at least 4 questions.

[@aishu6653]

@@SMEDUTALK ok sir thankyou

[@ROAMROVER2022]

👍👍👍

[@SMEDUTALK]

💐💐💐

[@21-sakthig71]

Helpful for Us Sir 💯

[@SMEDUTALK]

Glad to hear that

[@srrrtractors1476]

Sir 5 unit isometric projection video podunga

[@SMEDUTALK]

Ok sure

[@Vlmsg]

Sir unit 5 video podunga please

[@SMEDUTALK]

I'm going in order. I'll try.

[@piratebeatzofficial867]

Sir neega sollura units change ah irukku oru sella units name verra mathari irukku

[@shivamayam8001]

Iyaaa U great

[@SMEDUTALK]

Thanks a lot Shivamayam

[@archuspapercraft4238]

Circuit Analysis endha mari konjam sollunga 2021 regulations

[@SMEDUTALK]

I belong to Mechanical Engineering. Ask your department faculty.

[@crazyedits7355]

Sir 2022 batch 1st year eg pathi sollunga

[@SMEDUTALK]

You are following R2021 syllabus. You have Engineering Graphics (GE3251) in the second semester. So, no changes. Follow all my EG videos in this channel. The EG(Tamil) playlist is gives below; kzbin.info/aero/PLbRA7g9I38qmPW-Yh51FdNcIligksjlwU

[@sakthisree7835]

Sir, is this portions for autonomous colleges ,affiliated to anna university

[@SMEDUTALK]

Almost same

[@iniya650]

Sir.. I'm having some drawing tool (curve shape) for drawing parabola... Is this allowed in exam centre??

[@SMEDUTALK]

Set squares are allowed. Usually, these curve shapes are given in hollow form in one of the set squares. If you mentioned the same, you can use it. It is allowed. But, other instruments are not permitted except set squares, protractor, compass, divider and scale. You are allowed to do so if the invigilator isn't aware of this.

[@MahimaRamkumar]

Sir...thank you so much sir.... Enaku oru doubt sir... Unit 1 la irunthu 2 ques varuma athula one atten pananuma athu mathiri thaa ela unit ku varuma sir ..why am asking is previous year questions la unit wise kekama avangala ela unit la irunthu ketrukanga unit 1 la irunthu oru question kooda kekala sir ..

[@MahimaRamkumar]

Sir am waiting for ur reply pls reply me sir

[@SMEDUTALK]

It is convention to ask one question (either or type) carrying 20 marks from each unit. It is followed for years. But, it is not a rule. Very rarely, they may change this.

[@k.soniyakarunakaran9608]

Nandrigal pala EG ayiaa🙏🙏

[@SMEDUTALK]

மகிழ்ச்சி!

[@shivamayam8001]

Sir oru doubt unit one la epicycloid , hypocycloid illayae sir.......

[@SMEDUTALK]

In unit-1, it is mentioned that construction of cycloid. Cycloidal curve can be simply mentioned by cycloid. Cycloidal curve has three types; cycloid, epicycloid and hypocycloid. The term cycloid indicates cycloidal curve and also its first type cycloid. But, it is not clear which one is mentioned in the syllabus. So, on safer side, you have to study all three types.

[@shivamayam8001]

@@SMEDUTALK thanks a lot god..........if I have any doubt in EG I ask only with U....... because you only cleared to me

[@SMEDUTALK]

@@shivamayam8001 My pleasure

[@abdulwahith8733]

Sir Na 2022-2023 batch nannu 2021 regulation tha apo ennaku intha portion thana sir neega pota 2 years ago video iruku atha pathu padikalama Na leave la iruka book innu tharala pls reply me sir

[@SMEDUTALK]

Yes, You can study this.

[@abdulwahith8733]

@@SMEDUTALK Thank you sir

[@rashikarashika1290]

Examku procedure eluthanuma sir

[@SMEDUTALK]

No need

[@arulrx45]

Sir cycliod la antha 3 parts um syllabus la unda

[@SMEDUTALK]

In unit-1, it is mentioned that construction of cycloid. Cycloidal curve can be simply mentioned as cycloid. Cycloidal curve has three types; cycloid, epicycloid and hypocycloid. The term cycloid indicates cycloidal curve and also its first type cycloid. But, it is not clear which one is mentioned in the syllabus. So, on safer side, you have to study all three types.

[@arulrx45]

@@SMEDUTALK ok tnq sir

[@aluthipudigaming1343]

Na eg la pass aynum ena pananum

[@SMEDUTALK]

இந்த வீடியோவில் சொல்லியிருப்பது போல படித்தால் போதும்.

[@viennalifeithuemptylife6412]

Ella unitum mudicha alavuku teach pannuga sir please its my kind request sir

[@SMEDUTALK]

Definitely I'll do it. But, I don't have time to publish the videos continuously. In addition, many times, fewer views of EG videos make me to create other videos.

[@viennalifeithuemptylife6412]

@@SMEDUTALK ok sir

[@jairoyalmech2997]

💯👍🏻👑🥰❤️🦋

[@SMEDUTALK]

💐💐💐

[@-vaitheeshECE]

Thank you sir ❤️

[@SMEDUTALK]

Most welcome

[@Yhjsdyhj]

Thank you sir

[@SMEDUTALK]

Welcome

[@balusamyperumal7986]

Thanks sir

[@SMEDUTALK]

Welcome