How To Prime & Paint a Gas Tank with Spray Paint-Vintage Motorcycle Restoration Project: Part 52

Sign up for the E-Newsletter!
www.keeponwrenc...
Let’s prime and paint this old motorcycle gas tank! Medium Red Honda paint is about to go on the CL350 from 1972.
Subscribe for updates and follow along on social media!
/ bvmatson
/ bvmatson
This video series features the complete restoration of a 1972 CL350 Honda Scrambler motorcycle. The videos should help anyone whether working on a cafe racer build or a full-on original restoration. I'm definitely not an expert so please refer to your manuals for proper disassembly and assembly instructions. Please leave comments if you have any questions. I'll be happy to help answer questions if I can confidently provide solutions. Again, I'm not a professional. This is my 2nd Honda motorcycle restoration and I'm learning every single day. I'd love to hear your tips if you have better ways to do things. I hope you find the series useful and entertaining. I strive to show as much detail as possible so that the videos can be used as not only a how-to resource but also a reference for the placement and original set up of parts and systems.
If you don't have one already please get a manual for your specific project. There are many available online for download for free.
Common Motor Collective, from which I source many of my replacement parts, has a fantastic resource on their website: bit.ly/CBManuals
You can also join groups on Facebook and get involved in the community.
Keep on wrenching, Friends!
Please consider supporting the channel by purchasing items that you’ll need to complete your vintage motorcycle restoration project. Any support is appreciated.
BUY & SUPPORT
WD-40: amzn.to/3hIzIzg
PB Blaster: amzn.to/2N9CVtR
JIS Screwdrivers (A MUST HAVE): amzn.to/2NasN43
Marvel Mystery Oil: amzn.to/2NfYMjj
Steel Wool: amzn.to/2YU0Anh
Colonel Brassy: amzn.to/2zMK1RX
Wizards Chrome Polish: amzn.to/3dcD7Tv
Turtle Wax: amzn.to/2zMTNDv
Feeler Gauges: amzn.to/2V39tdn
Anti-Seize Thread Lubricant: amzn.to/2Yg7rIB
Blue Thread Locker: amzn.to/2Yg7AM9
Red Thread Locker: amzn.to/2CixExK
Test Light: amzn.to/37IC10R
Compression Tester: amzn.to/3elhWAi
Snap Ring Pliers: amzn.to/3fH4sii
Multimeter: amzn.to/2YSjefj
Micro Fiber Towels: amzn.to/3elil5M
Shop Towels: amzn.to/3etBRg8
Your support is extremely appreciated. THANK YOU!

[@TheDallasHopeDealer]

Great Job!! I didn't read the comments because ppl and their unnecessary criticism is just beyond annoying and disturbing. You helped me with some pointers for sure! Thank you for sharing your passion project with us! 💜

[@KeepOnWrenching]

Thanks for making my day!

[@daveco1270]

I'm doing my first tank right now. Haven't put the top coat on it yet, still doing some prep, trying to get it right. It had a little damage I had to fix with Bondo. I've noticed that once it's primed you can use a flashlight to help find any tiny dings or high/low spots. You put the flashlight close to the tank at different angles and you'll see a slight shadow if something isn't perfectly smooth.

[@KeepOnWrenching]

Great tip! Thank you.

[@Technewlogy]

You did a good job but i think u can apply heavier coats as well. We use a spray gun to paint and no matter how much you reduce the nozzle setting the coats come more heavier than yours.

[@KeepOnWrenching]

I’ll try heavier coats

[@jtmchannel7640]

Nice work, I’m 14 and me and my dad fix up and sell used / broken dirt bikes and motorcycles. I am in the process of painting a Harley Sportster for a guy, and this was very helpful. 👍 ( he gave me multiple bottles of spray max 2k primer and 2k clear coat, along with a good hot rod red, so I’m pretty excited.)

[@KeepOnWrenching]

Happy to help.

[@Steven1Cicero]

Be sure to get your primer as smooth as possible, Don't rush the job, The smoother your primer the smoother your end results. Do some research on guide coating and sanding, This will ensure you get it preped well for the smoothest finish. If there is one thing I have noticed about everyone that use's spray cans it is that they don't prep well enough and rush the job.

[@katebeckinsnail910]

You inspired me to fix my tank. It fell over in a trailer and got a dent on the tank. Always said I'd fix eventually, but after watching your vids about stripping and painting this tank, I realized this really is something I can do myself. Plus after having the skill, I can keep painting and trying new colors and what not. Great vids 👍

[@KeepOnWrenching]

Totally doable! Good luck. Be sure to use the 2K clear coat when you get it where you like it.

[@SHIDDYDRAHLS]

I really liked your video! It was very honest and very real! I messed up my gas tank on my bike trying to “fix” it. So I’ve been watching a lot of videos on painting tanks and yours is my favorite.

[@KeepOnWrenching]

Thank so much. I’m glad you found it useful. My vids are pretty honest! Lol. Doing my best. Good luck with restoring your tank. It can be done.

[@lukaspriest]

Great video! I love the idea of hanging the tank from the ceiling to be able to circle around it. Thank you for posting this!

[@JamesCouch777]

I love the work you do. I have the same passion for vintage bikes, I've got a garage full. Excellent job on the paint, I hope my current project turns out half as good.👍

[@KeepOnWrenching]

Thanks, man. Appreciate sure that. It’s definitely a passion. Kind of slightly maybe addictive too.

[@Technewlogy]

Sell me some projects

[@kpeters080188]

How long did you want to do the clear, and did you sand it before? I'm doing a step by step on your video and needing to find out. If so what grit and how long for a dry time? Thank you for your help and time.

[@KeepOnWrenching]

I waited I think an hour on the primer. Light sanding. Then color. Let the color sit for a couple weeks before I hit the clear. I think. It was a long time ago. You want that color to breathe out fully before putting clear on.

[@frankrizzo5057]

Wet sand it and clear it again. Than let it sit for at least 7 days and compound and polish to get it mirrored

[@KeepOnWrenching]

Absolutely. I need to clear it again now that I’ve applied the decals. Picked up a proper paint gun too. It should end up nice and minty!

[@scottwooldridge8946]

Orange peal is now an acceptable factory finish.

[@robertheck1806]

You should’ve tried the 2k clear. It’s automotive grade and resistant to any solvent. Amazing stuff. Spray max and I personally use kustom canz. You can always buff it out and do that over it.

[@KeepOnWrenching]

Yup. Since the time I filmed this it’s 2K all the way!

[@stephenhawley2160]

Looks amazing Brian, well done 👏

[@KeepOnWrenching]

Not bad for a rattle can!

[@tedatkinson4547]

Clear lacquer is not going to hold up to gasoline. Should use Spraymax 2K clear. It has a catalyst and will withstand gasoline. Also I bet your floor was a mess after you were done. You mention not to touch tank but you handled the rear mounting tab. By the way Spraymax has epoxy primer 2k also. Sprays with a wide extra fine pattern.

[@KeepOnWrenching]

Agreed. Lesson learned. 2K clear or nothing.

[@tom1263]

Thinking you may have quite a bit of overspray on the Honda right next to you

[@KeepOnWrenching]

It’s fine. I don’t really care. Lol. I covered it up at some point. Just more rust protection. ;)

[@M.C.Salazar3837]

I’m getting ready to paint my twinstar and found your video really helpful. Thank you for the content mate

[@KeepOnWrenching]

Great to hear. Be sure to clear it with 2K clear. I didn’t like how the stuff I used ended up. 2K clear all the way. Good luck!

[@M.C.Salazar3837]

@@KeepOnWrenching thank you

[@llewvirtue861]

Still nice, I tend to agree regarding the darker primer and the wet sanding, maybe another colour can would have done it, but that is how we learn. Well done

[@KeepOnWrenching]

Will apply what I learned for next time. Thanks!

[@quinnymandude1234]

Did you sand the primer before laying down the paint? If so what grit did you use? Did you only use 1000 grit?

[@KeepOnWrenching]

I used a pad like a fine 3m pad for paint. Seemed to smooth everything out nicely. I suppose you could’ve use like 1000 or more paper though.

[@claytonsmechanicalworld4733]

This video helped me restore a gas tank and I'm currently painting it now, thank you so much. How long between each coat?

[@KeepOnWrenching]

Great to hear. I usually set a timer for 7 mins between coats.

[@claytonsmechanicalworld4733]

@@KeepOnWrenching if I get wrinkling, do I dry sand or wet sand the spot down?

[@KeepOnWrenching]

If you have wrinkling that could mean some oil or other contaminant was on the surface. Let it dry and sand it down. Make sure to wear gloves and never touch the surface with your bare hands.

[@robertmiligi4835]

That clear coat you used is not chemical resistant, so what ever you do ,don't get no gas on it or it will lift your clear. You have to use a 2 part clear

[@KeepOnWrenching]

Oh there was a lesson learned. 2k clear from here onward.

[@sfdrcm]

I want to paint my CB candy orange tank, but keep the factory striping. Can I mask off the stripes and paint the tank, or repaint the whole thing and try to duplicate the stripes?

[@KeepOnWrenching]

I haven’t tackled painted stripes yet. I’ve went the decal route.

[@FlyNineVictor]

Hi Brian, Your videos are so helpful! Just bought a 78 cl 350 project, super fun. The wiring videos are so helpful. Love your Martin Sexton T. Keep up the freedom of the road, and stay in the journey

[@fuentes8503]

Why didn't you spray on the other side of the garage, all that room, overspray on tools, car, bike.. cover things. Believe me i know, that tank had you chasing it. Thanks 4 sharing

[@KeepOnWrenching]

It’s where I have a good anchor in the ceiling. Only reason. I wish I would have used two lines to reduce movement. Once i started it was too late. Lol. It all worked out at the end of the day. Really pleased with how the tank turned out. Thanks for watching!

[@BasicPoke]

@@KeepOnWrenching If you use wire to hang parts, it won't rotate. When you speed up your videos, we can't tell how fast you are actually moving while painting. Also you don't need to paint the bottom. Thanks for the videos.

[@capnkente1]

did you have any issues with overspray in your garage?

[@KeepOnWrenching]

Lol. Yeah. But it doesn’t bother me much TBH.

[@quinnymandude1234]

also did you sand at all before applying clearcoat?

[@KeepOnWrenching]

Just with a pad. Aggressive brush and wipe down.

[@wikidcustomsgarage]

I'm sort of restoring my 1982 Harley Davidson Sportster (XLH 1000) on my channel. I'm looking at getting a used tank, and front fender now. I have the rear fender already. I love the color that's on it but the paint has alot of scratches so I want to repaint it. Hints why I'm here lol. Anyway, I want the spare tins to paint so I don't mess up the beautiful color that's on it now. I'm not a great painter, but I've painted ALOT of projects, including custom rattle can paint jobs on guitars. Your video has definitely inspired me to try my luck, and see what I can do! Definitely check out my channel if you want to see the work I've done so far, and there will be alot more videos to come! Keep It Wikid💪

[@KeepOnWrenching]

Go get it. Subbed

[@wikidcustomsgarage]

@KeepOnWrenching I'm bout to order the parts! Thanks for the Sub!

[@ecirlos4902]

Did you get any rust inside that tank with out gas in it? How do you prevent that?

[@KeepOnWrenching]

I fogged it with some WD40

[@snoopdogguk2003]

next time sand primer smooth then hit it with a very light coat of black then sand till all black guide coat has gone then you will know its all smooth, you can see where its filled and the dent left highlights it, on 2nd coat very lightly run 3000 paper oer it then hit itwith a wet final coat for deep finish then high gloss it with 2k clear but nice job

[@KeepOnWrenching]

Thank you for the constructive tips! I love that idea of the black coat. Definitely will try that.

[@martinandrews6875]

Nice job 👌 lots of good tips 😁

[@KeepOnWrenching]

Getting better everyday. I wouldn’t hang it like that. Could just set it on a box.

[@poultonprojects]

Nice job going to tackle mine this weekend!

[@KeepOnWrenching]

Thanks! Painting those tanks feels so momentous. Good luck & have fun with the project.

[@thetruthisoutthere8598]

I use a coat hanger to minimize the spin

[@KeepOnWrenching]

Definitely needed something more sturdy! I laugh at myself sometimes. Getting better every day.

[@richierex]

Red primer might have been a choice!

[@KeepOnWrenching]

Maybe.

[@anthonyricchiuti4128]

@@KeepOnWrenching The gray worked.

[@abdulromaain5972]

sick man !! thanks for the vid. & for the crap talkers . this was done with a $20 budget & it came out almost if not exactly what you’d pay for having someone do it with a spray gun . again this is rattle cans and it came out sick ‘

[@KeepOnWrenching]

abdul Romaain thanks, man! So true. I appreciate it. I think it came out great too. For the record I did use Paint Scratch paint to match the original color that was a bit more that 20 bucks. :)

[@CMFOT]

It definitely inspired me. I have an 82’ gpz550 I’ve been working on all year and the tank is what I’m working on now. I have to clean the inside and get it prepped before I paint of course but coincidentally it’s red so I’m going for the same color you went for here. It looks good man! How long did you wait before putting on each coat of paint btw?

[@KeepOnWrenching]

Applied coats every 10 mins. Use 2K clear from spray max when you get to clear coating. Way better stuff than I used.

[@mattduncan5500]

Will that clear coat protect from petrol spills ?

[@KeepOnWrenching]

Use the spray max 2k clear. Great stuff. Worth the money.

[@2HYPR]

Tack Rag?

[@juewa9596]

You do spray a gastank without covering the motorcycle in the backgroud....🤔

[@KeepOnWrenching]

I covered it up eventually. Whoops! Lol

[@peterfettig8666]

Hey, I have a stupid question. I want to paint my tank a matte/satin color. When I put the clear coat on will that just turn the satin finish into a glossy finish?

[@KeepOnWrenching]

There are different levels of gloss for clear. Just like paint.

[@peterfettig8666]

@@KeepOnWrenching Thanks! Another quick question. The paint color I like came in a can that's primer and paint together. I wold still obviously prime it correctly, but will there be any harm in using a paint/primer combo.

[@KeepOnWrenching]

I don’t think it should hurt anything. Best to always follow the product descriptions tho. Be sure not to mix enamel and lacquer paints. It can be very problematic.

[@chrisstokley7687]

i painted mine mirror gold with rustolium/ then clear coated .. then 2 days i installed and had too use it work! when i filled it gas.. i spilled 2 tablespoons and all paint ran off top ..ugh.. no way ..soo sad :>( ....why hell takes so long dry?

[@KeepOnWrenching]

That’s brutal. During winterization my 70 seeped a little. Wah wah. Gotta use 2k Clear. It’s at least fuel resistant. I’m sorry that happened to you.

[@stevek4048]

How long did you wait between the last layer of primer and using the 3000 grit pad ?

[@KeepOnWrenching]

Steve K I waited several hours until it was completely dry before scuffing it.

[@enzprintco.8625]

3000 is too fine of a grit for a mechanical bond. Maybe use a guide coat, 600 grit sand paper and fix the ripples (low spots, high spots) and get it closer to perfection?!?! Nice video though! :) Also, waiting hours for it to dry kills any chance of a chemical bond.

[@golffoxtrotyankee]

I admit. .this video did inspire me... to always let a professional handle paint!! And to always ride American bikes.

[@KeepOnWrenching]

Cool.

[@BCrane]

Awesome video! How did the dust spot end up looking when all was said and done? Again, great video!

[@KeepOnWrenching]

It was fine. I lightly applied compound and tried to smooth it out once dry. Not bad. Especially after clear coat.

[@cdrseabee]

Is that clear fuel resistant like Spraymax?

[@KeepOnWrenching]

I believe it is. It was not a 2 part spray tho. I’m pretty careful with gas on the tank for sure. Since filming this I’ve use 2K clear and I highly recommend it.

[@tomservo3401]

I need to repaint my Honda Monkeys tank this summer

[@KeepOnWrenching]

You can do it! You can do pretty well with a rattle can. I’d live to upgrade to a paint gun one day though.

[@vincecloudchaser2486]

You shouldve used a black base to achieve darker color

[@KeepOnWrenching]

It came out right where I needed it. Darkening with darker primer would do it though!

[@888jackflash]

A straightened coat hanger would have been more stable than a rope

[@KeepOnWrenching]

Definitely! Lots of chasing around! Lol

[@jerrycagle7565]

Good job

[@KeepOnWrenching]

Thank you!

[@tommybader6054]

Alright guys...alright guys...alright guys....ALRIGHT!

[@KeepOnWrenching]

Sounds like I need to mix things up a bit on takes. Lol noted.

[@gsmacka96]

I cant wait to re do mine in matt black. I somehow had the impression there needs to be some sanding in-between coats. Idk why i thought that when i was younger when i did the paint job. Now that im researching more, i think i got this.

[@KeepOnWrenching]

You can definitely sand between coats. But I just went for it. Check the comments for tips from pros. My tank still looks great with a methodical rattle can method. Make it so.

[@aman2742]

NOOO! Cover your other CB back up before that wet coat 😫. I know, it'll only be dusty, been there. Otherwise nice vid!

[@KeepOnWrenching]

Ha! You can imagine my terror when I realized it wasn’t covered. Lol. I covered it up. No damage done. LOL

[@frankrizzo5057]

I was just about to ask how bad the overspray messed up the other bike.

[@haj811]

wonder why you'd repaint the tunnel.

[@KeepOnWrenching]

Not sure what you mean?

[@rupendersinghrajput5757]

Good job sir

[@myrnavandegeest583]

nice video! how many spray cans did you use? 1 primer, 1 color and 1 clear coat? or did you use more of each one? i am going to repaint my tank as well. but i'm not sure how much spray paint it will cost. your video is very helpfull!

[@KeepOnWrenching]

Almost 1 primer. Almost 2 full color. 1 clear.

[@lazzyboy333]

can you do mine 😭good job man looks mint!

[@KeepOnWrenching]

Ha! You can do it!

[@mattovictimcycles1334]

Should used black or dark grey primer imo color would have been closer..but nice job...

[@KeepOnWrenching]

Yeah, I used what came in the Paint Scratch kit. Definitely would have liked it to be a bit darker but I’m pleased with the transformation overall. I just clear coated this last week and it’s bulletproof! I may need to paint the side covers to match perfectly but for now I’m excited with how it can out. Great point on the darker primer. That could have made the difference. Thanks, Matthew!

[@lanceoverton5919]

First rule of paining a gas tank…..make sure you get the right colour !! ……Deerrr !!

[@KeepOnWrenching]

It actually came out great.

[@joehmingsanga4735]

it is really a DIY Project

[@KeepOnWrenching]

Yup! It can be done.

[@joehmingsanga4735]

just done my project, wish i could post pictures in the comment

[@KeepOnWrenching]

Me too, Joe. I’m thinking about putting together a group where we can share easily. Stay tuned for that. Congrats on finishing up.

[@KeepOnWrenching]

Joe Hmingsanga be sure to get that clear on too. Don’t wait on that!

[@hortyist1]

Brian, thanks for the video. I gave it a thumbs up. it was an easy way to show appreciation ...maybe the easiest. I'm sorry to see however. that there are those who would thumbs down a video like this. It reminds me that we share the planet with truly miserable people, sad. I have a question. I recently purchased a 4.5 gallon tank (new but not finished) to replace the peanut tank on my sportster...2 questions : is a wet sand between coats of clear a bad idea ? and... will bondo adhere well to sanded primer ?

[@golffoxtrotyankee]

Ahhh . .you ride a Sportster, now your comment makes more sense. Cute bikes, my Mom has one. Cheers

[@hortyist1]

@@golffoxtrotyankee That ain’t all your mom rides

[@anthonyricchiuti4128]

Bitchen narley work. I need to see the tank after you buffed it.

[@KeepOnWrenching]

Check out the IG account keep_on_wrenching it turned out pretty good!

[@anthonyricchiuti4128]

@@KeepOnWrenching When I was 17 years old I rode the friggin guts out of a 1971 honda CB350, the one painted gold. At the same time I had a 1961 Triumph bonneville, wrecked that one on the side of a mountain in West Va, came up with a few breaks in that one. Still ridin.

[@mekongman3339]

Too funny, when you are too happy getting some colors and forgot to put on the respirator

[@KeepOnWrenching]

Mekongman i do that ALL the time. I just get so excited by each bit of progress. Lol

[@p.s8950]

Glad yer happy with it. I'd be piss if it was mine. And enjoy having everything in your garage that shade of red. lol

[@KeepOnWrenching]

It really didn’t carry around the garage at all. Check out the later videos if you get a chance. It came out really nice for that barn find. I hope the vid kept you entertained at least. Thanks for the feedback.

[@mekongman3339]

aww shit, when you drop that cloth on the ground, RIP.

[@KeepOnWrenching]

Lol. Yup.

[@robertveith2571]

You should paint in one direction!!!!!!!!!

[@KeepOnWrenching]

I’ll try that! Thanks.

[@Vv_Twisted_vV]

All that work only to make silly mistakes. First the repair work wasn't complete. I seen one flat spot in the bondo area. Was clear as day with the first primer coat and then there is the multiple pin holes. As for the paint job... never touch your work with bare hands after the prep is done. Wipe it down in one motion with prepall and spray. Chasing your work around is never a good idea. Next time use two hangers, one left and one right and you wont have to chase it. With that all said you have talent just tighten it up a bit and you will see major improvements.

[@KeepOnWrenching]

Learning every day. Thanks for the constructive criticism and insight.

[@tmarx88]

Good job, but you must not worry too much about overspray getting on that other Honda right next to you. But over all nice work.

[@KeepOnWrenching]

I forgot to cover it up at first. As soon as I noticed o wiped her down. You can see it in the edit.

[@tmarx88]

@@KeepOnWrenching yeah i did that once and got overspray on a roommates Harley and he wasn't too happy, that was 30 years ago or better. Thats why i noticed

[@simongarcia8474]

Nice

[@KeepOnWrenching]

Thanks, Simon. The tank came out great for a rattle can job.

[@JoseRojas-sh8sn]

Hello Brian! Do you do work for other people as well or just yourself?

[@KeepOnWrenching]

Jose Rojas I’m just focusing on my own projects right now. I’d encourage you to look locally for any work you need done. I’m still learning and can live with my mistakes. :)

[@jronmorgan]

lol.. always paint a test piece when color matching....

[@KeepOnWrenching]

I really didn’t have any other options so I just went for it. The paint scratch ended up coming out remarkably close for a 50 year old color. It was a “it is what it is” kind of a situation.

[@nzkiwitwowheels4017]

If that’s not enamel engine paint gas will dissolve the paint

[@KeepOnWrenching]

It was enamel paint. Cleared with 2K.

[@michaelangelod5008]

I like ur voice

[@KeepOnWrenching]

That’s nice. I talk a lot so that’s good. Lol

[@MeatsackMiracle]

Wow, a lot of orange peel

[@KeepOnWrenching]

I honestly didn’t see it in my final result at all.

[@nakoawarrior3186]

Well this guy sure has the spirit,.....but rattle can paint jobs to me never look good. Yeah,....I was forced to do mine that way,....I did it in the 2 hours between jobs,.... so I wouldn't have time to clean my spray gun. My advise is read the can first to make sure it's enamel,.....not Lacquer,....or to do the job right you would have to strip it down to bare metal,.... again. With enamel you just scuff it and paint it. You cant spray enamel over Laquer. That's old info but I prefer enamel to the new crap. Base cote clear coat? Do the same thing twice? Epoxy paint? Not in my spray gun? WATER PAINT? My cheap scate company made me use that crap. If theirs putty involved you need to seal it before you paint it. For a smooth finish you wet sand the primer. But you put the primer on heavy,.. not fast and dry. See you wet sand,.....the primer to make a smooth surface. You spray it slower so that it go's on like paint,......not dry like over spray. You should not have to sand your paint between coats. A) seal your bondo. B) Heavy primer C) wet sand,....wipe off good. D) Paint,....you should see gloss,... not flat over spray from going too fast. E) After that keep the paint glossy,....after 3-4 coats your done. To me his paint job looks like he went too fast with the primer and its essentially over spray? Then he sprayed his paint over,......the over spray and instead of gloss its a almost flat haizy look. You want about a pint,...in a touch up spray gun,... and it will look as good as it can look. You will see all your bad bondo work,...unless you paint it white.

[@KeepOnWrenching]

It actually turned out really well. I’m sure a paint gun would do nicely/better tho. Thanks for all the info.

[@johnharrison2466]

You sound like Jack Black

[@KeepOnWrenching]

People keep saying that! Lol

[@flintsmiley9595]

Lol hes chasing his part around and around

[@KeepOnWrenching]

It was a workout! Got it done though.

[@scruffy4647]

That swinging tank is making me dizzy.

[@KeepOnWrenching]

Totally. I put them on boxes now. Lol

[@rudolfcarp9139]

Das ist nichts besonderes

[@KeepOnWrenching]

es kam gut tho!

[@2thehook773]

Wrong! You should wet sand primer between coats. Wet sand the color, then clear. You would have had a much better result. It's also obvious that you can see the bondo areas and a few dents. Orange peel city.

[@KeepOnWrenching]

I couldn’t be more pleased with how this tank ended up. It was a complete mess before. Noted on wet sanding. Thanks for the tip. Always learning! It’s a hobby not a lifestyle.

[@devin297]

What grit of paper for wet sand primer and what grit for wet sande base coat? Then when you spray 2k clear do I have enough to San buff and wax it or am I good to go!?

[@alexhogan1]

​@@KeepOnWrenching4yrs later I'm doing my vn1500, I've just laid the base coat on the front fender. As it probably takes more of a beating from road grim etc I thought I'd make my mistakes on it and learn before doing the tank. So far I'm very pleased! Thanks for the video 👌🏼

[@swanny8869]

That can does have a wide spray pattern, your technique was poor. if your using up and down movement hold the can horizontally, if side to side then hold the can vertical. you will waste less paint and have an even finish.

[@KeepOnWrenching]

Thanks for the tips!

[@IAMNABR]

why are you chasing your tank??.. walk around it and spray a bit slower.. you and the tank are moving way to much.. if you have too, hang the tank from two lines to stop it from spinning.. man.. I was getting dizzy watching your video..

[@KeepOnWrenching]

I got dizzy too. I needed two lines for sure. A great workout tho and the end result was pretty good!

[@IAMNABR]

@@KeepOnWrenching actually.. from what I saw it was mediocre.. at best... your technique to prime is seriously flawed.. you are wasting way to much paint just throwing it at the tank.. slow it sown a bit.. relax.. remember.. its only paint.. if it doesnt turn out right.. it can be redone.. your overlay should be about 65 to 75%... depending on the spray pattern of the nozzle.. and you should go around your seams and edges first to allow to get a good coverage there when you do you final spray...good luck..

[@NHEFF09]

is this a joke ?

[@KeepOnWrenching]

Nope! Just a vid for us rattle can guys! It’s pretty fascinating what can be done with those bad boys. The tank came out great!

[@thecentralscrutinizer5105]

WHA???...No wet emory sands between coats???.... bahhhhh... another hack job with a pressurized can

[@clementflutto6921]

Sir, This is petrol tank, not a Gas tank, correct it yourself

[@KeepOnWrenching]

Lol. Depends on where you are.

[@clementflutto6921]

Majority in this world, And we call it as petrol tank , And every corner of the world and advance country say it. Stop fooling your self,

[@KeepOnWrenching]

I’m an American. We don’t care what the rest of the world calls it. It’s a gas tank. Always will be. But you can call it whatever you want. It’s not like we would send in our military or anything. America!

[@clementflutto6921]

@@KeepOnWrenching nobody needs all your use less, etc

[@fareesthehilsss1138]

Clement Flutto shut the fuck up stupid ass name. sound like a fungus.

[@SteveSherron]

So the Wifey asked me if you were getting spray on the gold bike? Any overspray on the other bike? I'm like Kentucky Yankee, I think it's time you graduate to a spray gun and compressor. Find a local automotive paint store and mix and match your own paint and colors. You will never go back. I will say you are probably getting the best job out of a spray can that is humanly possible.

[@KeepOnWrenching]

I had the gold one covered “most” of the time. I did give her a good wipe down though once I realized the error of my ways. Spray gun has been acquired for the next bike. But I am pretty thrilled with what can be done with the spray can when you TAKE YOUR TIME. Plus, not everyone has an air compressor, etc or funds to acquire them. It can be done via alternate means.

[@frankrizzo5057]

I have gone to spray gun and airbrush gun and I am done with rattle cans. The guns are so much better in finishes and ease of usage.

[@jayalarcon1575]

Slow video

[@KeepOnWrenching]

No. It was recorded at regular speed. Thanks for watching. I hope it was helpful.

[@ghostghost6268]

cough cough

[@KeepOnWrenching]

Here’s a cough drop!

[@714thegooch]

Don't make how to videos if you don't know how to.

[@KeepOnWrenching]

It’s a journey!