How to program a Majortech Digital Timer MTD8

How to program a Majortech Digital Timer MTD8

[@_Paul_Williamz]

Thank you so much for this. It makes a Lotta sense now. The manual is honestly a set back.

[@KFR8766]

Soooo helpful. I will see how it works from now on. Your totorial was straight to the point. 💯

[@Iwantedto]

Never understood the flippin thing until now! Thanks m'n!

[@Jligoo]

Much better than the manual that comes with the timer. Very helpful indeed

[@aubreydebruyn84]

Thank you so much. I had the timer laying around and final had the guts to install it after watching the video. Worked like magic.

[@jmd55-jmd]

With all these fluctuating low shedding times, it will help from not getting up too early to switch on the geyser for work. Very helpful video, clear and precise. We probably will have to reset the timer everyday, until there is no more low shedding. 😂 Thank you for sharing your expert knowledge. 👍😊

[@AmiTheo]

Huge thanks this vid has been a God send in loadshedding...

[@bensmit6441]

Wow...amazing and very well explained...thank you a ton ...

[@botsle]

Thanks bru Saved my arse with this video! The step of setting days on timer for on and for off…

[@lunell499]

Thank you for the great, easy to follow instructions. We'll now save power and have hot water at the right intervals.

[@michaelmazu1293]

Lu Nell for the installation contact michael electrical services at : [e-mail]

[@ShalomBlack]

Thank you, saved me from bathing with cold water coas i did not know how it works.

[@thomasmahlangu4119]

Last time the Electrician battled with set up. Seeing that we lost power supply and had to rest found your Video very helpful. Thanks

[@rossmcc4061]

Thank you for taking the time to make this.

[@martinsimmanuel754]

Thanks your video was helpful to me.... God bless you

[@raeoliver4156]

Wow you saved the day. Thanks for such a great, easy-to-follow video. Much appreciated!

[@markiworthington6658]

Thanks for such great instructions, appreciated !!

[@eikkieyforles905]

Thank you for your great video

[@hennievanderwalt3017]

Good work my friend

[@ecologicaltime]

Thanks Hennie

[@samublackdiamond]

Thank you. Very helpful 👊🏾

[@QueeneLele]

Can I set the timer for week days and another time for weekends only? If I can, please advise. Just bought the timer and will be installing it soon.

[@ecologicaltime]

yes it can do that

[@catmastercat7084]

very clearly explained. Thanks

[@kennethfisher7861]

Thank you for taking the time to make this video. Is there anyway that the timer can be set to only sound for 5 seconds and not a full minute each time? Thank you.

[@danishanfrancis8738]

This is so helpful a BIG THANK YOU TO YOU

[@rasklopper6238]

Thx very helpful great instructions

[@legdan1866]

Is it possible to set the MTD8 in seconds, Like you want it to close @ 12:10:30 and open @ 12:10:50?

[@ecologicaltime]

i didnt see seconds when i made the video.

[@michaelmazu1293]

This is wonderful explanation thank you very much

[@dezmotlhamme7153]

qp000⁰000⁰⁰p⁰⁰⁰0000000p0p0⁰⁰⁰⁰⁰0⁰0p00⁰00⁰

[@dezmotlhamme7153]

a

[@StreetArtist360]

Thanks, you the best.

[@gavinnugent8119]

Well explained! Thanks

[@mirandadavids5198]

Thank you for a great video

[@shanedutoit8369]

Bladdy decent video, thank you

[@stephenlokker6310]

What a legend, shot bro

[@aneurin2711]

Very helpful, thank you

[@khathutshelonelukalo189]

Awesome video. Thank you so much for clear instructions. The on light doesn't work

[@TheGudanie]

Hi. is the power rating of MTD8 compatible for a geyser?i.e wont blow up? i don't know much about these things just making sure

[@ecologicaltime]

yes it says 20A which is suitable for domestic geyser under 4kW

[@michaelnuttall9249]

Mine is slightly different regarding the auto / on / off it reads auto on / auto off / off / on. My question is, which setting is used for the timers to functions properly

[@jorgesinga449]

Me ajudou muito hoje

[@garethgc1141]

Got the plug in MtD 8, got it working perfectely but now struggling with it as sometimes it switches on sometimes it doesn't

[@avrilpretorius1762]

Mine seems to be doing the same...the light goes on as if it should be working but my pool pump does nothing. Not sure if the unit is broken or if I need to call the electrician.

[@garethgc1141]

Seems to be an electronic problem, had to replace mime

[@avrilpretorius1762]

@@garethgc1141 good to know, thanks for the reply!

[@fe2392]

Thanks a lot for these Video. But honestly its the most owful timer. Not even the electricians know how to operate without manual... The figures are too Tiny difficult to see, worse if you need a torch. 😩

[@leehermans4564]

👌👌👌

[@ShayneBapela]

W video! Thank yoy

[@moeketsirathebe1865]

What could be the problem if you set all timings correct but it doest go On?

[@royrowley7779]

I need the timer to switch over every four hours???

[@gman6807]

Hi, my clock is out after a month, can I reset it without having to starting all over again?

[@pearllebesa1539]

Please help. Mine is completely off and I can’t figure out how to switch it on

[@pieterse4075]

Hi is it possible to program it to cycle on short intervals for instance every 15 min on and of? Thank you

[@ecologicaltime]

no you only get 8 intervals, However teh CBI timer does do it. kzbin.info/www/bejne/pHrNeZSJl8yprs0

[@vivanmarcusmoodley2354]

wha happens when this unit gets switched off during loadshedding, does it lose its settings, meaning u have to reset this unit, all the time.

[@givennxundu4773]

Very helpful

[@LindoShandu]

Thank you!

[@alexmichael7469]

Please can someone help me. I have a timer that has auto on and auto off as options. And then has on and off. I'm so confused.

[@tammyhale2399]

Thank you

[@philipamoahmanu4233]

Noted 🙏

[@mieliepapET]

thanks!

[@nelsonmakeketa6188]

Great , no more cold shower 🙂

[@geraldmolaletsi3242]

Thanks , for programming major tech MDT 8 timer.

[@kevinbukasa1860]

Thanks

[@afriiquanontop1234]

About your video on how.to get rid of the admin password on windows 10, it didnt work and now I'm stuck in safe mode. Can you help me?

[@ecologicaltime]

use the boot menu to exit safe mode.

[@zohancargotis2109]

South african

[@ecologicaltime]

yebo

[@SizweMajola]

I was about to say the same, picked it up within 10 seconds . . . going to get one - now that we can buy at hardware stores during lockdown

[@brianpugsley8902]

Timer

[@dr.y.venkateswarlu311]

How to set programe to switch on alternate days 1,3,5,7,9,11,13 on from 6 to 8 AM, 2,4,6,8,10,12, off

[@VitiableTea]

your timing was mad

[@sylvesteruchia5263]

Soo complicated.

[@levi_ronald6794]

Check this man doing the lords work 🥹👍🏽👍🏽

[@noluthandomakhaye1011]

Thank you

[@Africanbararian]

Thanks