I know this video was recorded. It seems like seven years ago that to tell her the truth I tried every other method and this one I read put it on pause did the process and it worked beautifully thank you so much for having this video up for us they are not very savvy, God bless
@eastwood1113 жыл бұрын
As a window covering professional this video was extremely helpful!
@anthonymann20612 жыл бұрын
I have spent ages trying to sort out my somfy blinds.Was about to chuck it in the bin. I now discover all the other helpful or [totally useless] videos were a waste of time. In fact following them always put me on the wrong road. The instructions here are very easy / clear cut - and it works. Honestly this product is fantastic - JUST NEEDED CLEAR BLooDY INSTRUCTIONS. PLEASE DELETE ALL THE OTHER UNHELPFUL SOMFY VIDEOS AND JUST KEEP THIS.
@Skaitboerd3 жыл бұрын
The best tutorial yet
@miriamgonzalez76712 ай бұрын
Best tutorial ever 🥰
@kozakhanda3 ай бұрын
i did all this but the blind stops halfway down, only goes up if i press the remote twice. and then pressing down the blind only comes down quarter way. again press up twice, goes up then it jogs at the top.
@TheIrearmel4 жыл бұрын
Very helpful! Thanks for the tutorial
@bhampatty17 жыл бұрын
What if the blind does not respond at all when I simultaneously press the up and down button? In fact, I can't get the blind to respond to anything I do. Can you give me some advice?
@claytonrhoades9386 жыл бұрын
Ever get a solution? I have the same problem.
@NYDRAPERYGUY80004 жыл бұрын
try to replace the battery in the remote. The motor may be dead. last resort purchase a new remote.
@NYDRAPERYGUY80004 жыл бұрын
one last thing you can try is to get a pin - press and hold the programming button in the back of the remote. If the shade jogs - continue with programming kzbin.info/www/bejne/iYKanmmXe8ughbM
@tombaron3229 Жыл бұрын
I have one remote that works that came with. The two I purchased as back up do not work at all. I have tried all steps . Now what?
@fortunatoquileste Жыл бұрын
Thank for somfy
@ralucy886 жыл бұрын
Step 3 did not work for me, the shade still not rolled up to the top.
@osamahosam56605 жыл бұрын
Lucy Chen have you managed to get any feed back i see your reply was one year ago, and i recently installed them and having trouble changing which direction does what.
@fungayikarumazondo64512 жыл бұрын
My blind is stuck inside the pelmet how can I unroll it
@jthalley7 жыл бұрын
This would be better if the person was also instructing you verbally.
@mrodrigomana4 жыл бұрын
Is the same process to add a new controler?
@OrderblindsUk4 жыл бұрын
No, to add a new controller to a blind that has already been programmed press the program button on the existing handset (the blind will jog), then press the program button on your new handset (blind will jog again). Job done.
@fegodoy3 жыл бұрын
@@OrderblindsUk what if you don't have the old handset? i lost my original one and I'm trying to program the new but I can't :(
@OrderblindsUk3 жыл бұрын
@@fegodoy In this case I would locate the program button on your motor (they vary depending on the motor you have), press and hold for about 1 second and the blind should jog. Then press the program button on your new handset (the blind will jog again) and you should be good to go. If the settings have gotten in a muddle then I would suggest a full reset and then start again. Here's a video on how to do a full reset: kzbin.info/www/bejne/f3axon2tlNyDn5o
@osamahosam56605 жыл бұрын
I am still having problems with step 2 it keeps going in the wrong direction can you please advise
@NYDRAPERYGUY80004 жыл бұрын
to change the direction press and hold the middle my button until the shade jogs. Then proceed with programing.
@johnm57143 жыл бұрын
Make sure all your batteries are charged or it may not take commands-
@mzahidshabir55535 жыл бұрын
Please help me solve this problem.
@datorion4 жыл бұрын
Thanks!
@mcdiebithell28252 жыл бұрын
my blind did not move up ordown when i press the button what should i do.i did the three second method still not working?
@mzahidshabir55535 жыл бұрын
Step 3 no work,after complete step 2 the motor is moving up and down only 5 to 6 cm
@igorvieira91725 жыл бұрын
I'm having this same problem... What u did to resolve It?
@NYDRAPERYGUY80004 жыл бұрын
you will have to complete the programming by getting a pin and pressing the programming button in the back of the remote kzbin.info/www/bejne/iYKanmmXe8ughbM
@dennisdangirwa-qe2kd7 ай бұрын
If a motor is stopping
@tristanwwsd5 жыл бұрын
These blinds are constant trouble. Don't buy unless you want to spend your weekends working on them.
@chicogarcia62735 жыл бұрын
I've been trying to set them right since yesterday!! I am only able to set 2 of the 3..so blinds 1, 3 work but NOT 2, and i put a new solar panel and charged the batteries, still not working!! Hours wasted? I wish I had somebody I can blame,so I could BREAK THEIR BLIPPIN FACE!! Anyone has a video that can help? Ive tried a few already
@valentinmaxim69745 жыл бұрын
@@chicogarcia6273 make sure to reset the motor first. kzbin.info/www/bejne/gpKcgoh9r710hpI Also cut the power to the other motors while you program motor 2 for example. The instructions that come with the remote are a bad joke!
@NYDRAPERYGUY80004 жыл бұрын
I can help you kzbin.info/www/bejne/iYKanmmXe8ughbM
@alastaircameron974 жыл бұрын
This video is difficult to follow. Why don't you have someone talking over it also? The steps are not clear.
@dominicjoslin54313 жыл бұрын
Write down the steps, using the pause so that you have time between steps. I wrote in two columns, left for instruction, right for expected outcome. I numbered the steps 1, 1.1, 2, 2.1, 2.2, 3, 3.1, 3.2 etc. This helped my aging brain.