How To Program Dip Switches For Garage Door Gate Remotes Like Linear Chamberlain Universal Video

[@danoabramo1]

The dip switches on my SteelCraft garage door opener have three positions (labelled: '-', '0', '1'), not two. ☹️

[@MightyMorbin]

The intro sent me back in time 20 years you son of a bitch!

[@KungFuMaintenance]

Good thing it sent you back instead of forward! Make wiser decisions and enjoy your youth!! Time flies!!! :D -KFM

[@aprildiamond42]

I just spent several hours working on this, and unfortunately, this didn't solve the problem with my 2 new remotes. No learn button, but the dip switches are set correctly. I tried all up, then setting, all down, then setting, I tried setting them opposite, I tried upside down, nothing worked. I was using an old remote that does work and trying to set new ones with the same number of dip switches, supposedly compatible, but the new ones just won't operate the door.

[@endezeichengrimm]

Ok I see. So you leave the extra ones OFF, and don't forget the learn code step at the end(see instructions of the one you bought).

[@joeyweber4870]

This video saved them a return. No where could I find an explanation. After 14 clicks it located and activated my garage door opener. Thank you. Poor, poor chamberlain needs to add this video to their website.

[@williambrown9978]

This video was very helpful. I followed the instructions. As I was doing my 18 clicks I hit 14 and the door opened up. After that I pushed the program button and locked it in. Thanks.

[@TheFat_Operator]

William Brown same for me bro 👌🏾

[@matthewwilson2727]

Thank you for your informational video for programing dip switch openers! Nowhere in the instructions does is say to press the remote 18 times! After watching your video, I went out and followed your instructions and it worked right away!

[@salemdog100]

You are my new best friend. We have an old AllStar garage door opener, and needed a new remote. Could NOT figure it out. until you said, "Keep pressing the switch, this one is set to 18 so I will press it 18 times." And eureka, ours worked when we got to 14. Of course, that was AFTER I reversed all the dip switches. You da man.

[@sirosis1971]

Hi, thano you for your video, although it didn't show how to solve my problem. I currently have a garage opener with 8 dip switches set to open and close the door, but I need another opener and the one I have uses 10 dip switches. I followed your instructions but no luck. Any ideas? I can provide pics upon request. Thanks!

[@sotoronaldo22]

ONLY HELPFUL VIDEO

[@stevecho]

Dude. THANK YOU. The manual is garbage. With a few seconds of your video, I programmed my buttons correctly. Appreciate you.

[@dogface1911]

Wow! Mine worked exactly on 18th time! I had no idea. Thought I'd wasted money. The manual didn't say anything about 18 times. And who the hell is gonna go that long. Normally you hit button 4-5 times then just try with the learn button again. I never would have figured it out if I hadn't watch this video. Should have watched it first. It was like when Clark got the Christmas lights to work! Thanks.

[@adama2511]

Great video, I have an old Stanley engine with switches, I matched them all and used the same technique on a different universal remote that uses identical instructions. The door did not respond, could it be that it does not match that specific model? (Stanley 440) Refoss remote (Amazon)...

[@KungFuMaintenance]

Check out this video for possible fix. Hope it helps! kzbin.info/www/bejne/hn6lmWV7p7uci80

[@IAMDAD909]

Great video, I’ve been searching for an hour on what position 9 10 11 and 12 dip switches need to be in To work with an eight dip switch remote. Thank you so much

[@malgorzatabiskup]

great video - the best I should say. Thanks!

[@watersprite402]

What if there are zeros? What should I switch them to? I have an old sears/craftsman HP 1/2 with nine dip switches and they go in order like this 0 - + - 00000. I wish this would work for me!

[@adamgranzow519]

Very helpful, not sure why there are so many thumbs down. This video showed me exactly what I needed to do.

[@christopherlowe7184]

I see where the dip settings are on the transmitter, but where is the dip setting at on the garage door receiver itself? How do I know what to set my transmitter to????

[@tonyalindskog4600]

Why don't all the tutorials say this??? I spent an hour or so trying to find the "learn" button when it was TOTALLY unneccesary. THANK YOU!!!!!

[@td4830]

Thanks for the video. The Chamberlain internet site wasn't working, so the video was a huge help in getting the new remote to control the garage door opener.

[@karenwilliams9288]

LD500 model how doo I program this?

[@luciabrack8180]

Thank you so much!!!! You saved me!!

[@jessema1212]

Thank you

[@MattSyversonthePaperbackRocker]

THANKS!

[@reckermk]

This was so helpful! I could not figure out how to program my new remote because it has more switches than the old one. This was very easy to follow.

[@jacquesfrancois9715]

where is the dip switch on the motor itself

[@TheDARKNESS8030]

Thank you so much..I got the house that has two doors we had one opener but the wife wants to park in the garage to. I went all over the internet to find instructions and manuals on the type of opener i have and got nothing. Saw your video and found my control box worked in a minute

[@vegantrader]

thanks... you made my day!

[@emtz412]

Awesome thank you so much!

[@karenwilliams9288]

LD050

[@DC-uq9vy]

finally a video that told me how to do it!!!!!! thank you

[@biancamorales4613]

Thank you!!

[@letseeitplease]

this was fascinating and interesting because i didnt even know they had dip switchs in those remotes, i learn something new everytime i see your videos, great job,

[@travisbaker782]

Thank you!!!! Got it to work!

[@KungFuMaintenance]

+Travis Baker Yay!!

[@survivormary1126]

Can't see diddly squat.

[@KungFuMaintenance]

+SURVIVORMARY Let it be known that Diddly Squat no longer works for me or my company.

[@aaroncordova2885]

KungFuMaintenance that is the funniest thing I have read on this internet machine in months. Good video, great comment. Thanks for both!

[@stoogler180]

Thanks my friend. You just help me program my chamberlain universal. I followed your exact instructions and it worked perfectly. Thank you.

[@KungFuMaintenance]

+Arthur Foots Excellent! Good work! You are welcome!