How To Program Your Chamberlain Garage Door Opener. Super Easy!

[@mikemalone6862]

Watched a few other videos, and this is what i was looking for. Short, sweet, simple, and effective. 5 stars! Thank you for sharing! 🙏🏼

[@garagedoorgenius]

Glad to help! I appreciate the awesome feedback.

[@brianwalker6794]

We installed a new opener last night. I wish I would have seen this before we tried to program it. It would have made things easier on me and my dad. Well done sir!

[@garagedoorgenius]

Thank you and you're welcome 😊!

[@blkmacster]

That's my line. 😒

[@jaysee27]

Wow. You saved me some dollars for a service call to a technician. Your second step about measuring the force of the opening and closing was the part I didn't know and was causing my issue. I have a Chamberlain B4505T. Even their manual didn't have that step! Thanks.😊😅

[@garagedoorgenius]

Thanks for the awesome feedback!

[@notfamousprepper7369]

I found the trick is to make the door so the rubber weather stripping at the bottoms barely touches the concrete. Then opener automatically allows the door to gracefully fall into place the last 2 in. Like a built in soft close feature. Use the arrow to slam in into its final resting spot will activate the safety feature when adjusting and ruin the adjustment process. Hope this helps!

[@garagedoorgenius]

Excellent pro tip! Thanks for posting. 👏🏼

[@radioflyer9490]

Thanks so much. My instructions had nothing about the fast flashing up and down buttons after setting up the travel settings. Ten minutes after watching your video it was working! I played with it for hours trying to get it to work using the instruction manual that came with it. Thanks again!

[@garagedoorgenius]

That's great news! I appreciate the awesome feedback 🙂.

[@nunocoelho8979]

This video saved me $150 to have a door company come out where I live..thank you so much

[@garagedoorgenius]

Glad to help!

[@chrischapman276]

Thank you for this. I bought this for my daughter/son in law a couple years ago while visiting and came back to it still unfinished from then. Of course "someone" doesn't know where the instruction manual is for it after 2 years but that's okay.... I've got you here on this wonderful KZbin. Where everyone can be a professional in only a half a day!

[@garagedoorgenius]

@@chrischapman276 I love this comment! I appreciate the awesome feedback sir. 👍🏼

[@chrisgraef165]

Saved my day! Just installed my new garage door opener using the Chamberlain user guide and the open/close instructions were terrible! Thank you so much for this

[@garagedoorgenius]

Glad to help! 👍🏼

[@Subietech]

I just installed mine and its not programming 🥹🥹🥹 its giving me an error, excessive force to close, my guess is i have to adjust the rails on the side or something, manually door goes up and down not that bad

[@garagedoorgenius]

@@Subietech yeah I would definitely make sure the door isn't dragging and running pretty smooth. I would maybe lubricate the rollers, hinges, and springs. If you have an extension spring set up, hit those pulleys with lube. Then press the yellow button twice. That puts it in force setting mode. Press the flashing arrow that's flashing. Let it cycle. Then press the flashing arrow again. Let it cycle....

[@Subietech]

@@garagedoorgenius thank you some much for taking a min and responding 🙏🙏 i will do that tomorrow hopefully that works, love your video by the way

[@Subietech]

@@garagedoorgenius hey can u believe i couldn’t programmed the limits because when hitting the up arrow i was going all the way to the stop to the bolt, you cannot do that u have to stop it like a inch before, i had to watch your video one last time and i noticed it 🙈🙈🙈 , thanks for your video

[@ericdunn8851]

Thanks, probably should have read the directions but I didn't and have no idea where they are now. It worked great for years then this happened . You completely saved me. Thanks again 😊

[@garagedoorgenius]

Glad to help 😊!

[@kenedwin6144]

Thank you so much. Your video saved me from going over several videos to solve my garage door issue.

[@garagedoorgenius]

I appreciate the awesome feedback!

[@giovannireyes9455]

You sir are a metaphorical lifesaver. Thank you very much, now I know what to do in the future when the door starts acting up again.

[@garagedoorgenius]

@@giovannireyes9455 thank you for the comment! This made my day. 🤗

[@atmhillshandy1307]

I'm a handyman and garage door is not my area of specialization but after watching this video i was able to help a client to program his Garge door.. Thanks

[@garagedoorgenius]

@@atmhillshandy1307 I appreciate the comment brother. 👊🏼. I'm glad the video helped out.

[@dq6sf]

That was very helpful ! spent 2 days trying to figure why it's not working, even bought another unit thinking it's has some technical problem, thanks a lot!

[@garagedoorgenius]

Glad to help! Thanks for the comment.

[@farhadeskandari9263]

Thank you very much. Your very detailed instructions and demos helped me to .ake sense of all those blinking and beekeeping on my garage door opener and finally set it up. Thank you again.

[@garagedoorgenius]

@@farhadeskandari9263 you're very welcome! Glad to be of assistance. 🙏🏼

[@joseenriquez5833]

Installed one of these today and was not doing anything thanks to this video i got it working thank you very very much

[@garagedoorgenius]

Glad to help you my friend! 🤗

[@denisema4499]

Thank you. I learned from you to set my garage door in a minute. You save me a lot of time instead reading the thick instruction manual.

[@garagedoorgenius]

Denise ma Awesome!! Your welcome.

[@meganmorales950]

Oh my gosh thank you so much for this video!!! Myq would not open or close and could not figure out for the life of me why. I got it fixed finally! Thanks!!

[@garagedoorgenius]

@@meganmorales950 that's awesome! Good job. 👍🏼 Thanks for the comment.

[@philipblair260]

Sounds like you are a pro. I followed the Chamberlain instructions multiple times. I watched your video once. The programming fails to set the open limit every time. It continues to hit the bump stop. I even set the the open limit to about half open and when done it still raises to the bump stop. Chamberlain is beyond slow to respond. Compliments on your video, that is the way it is supposed to work.

[@garagedoorgenius]

Phillip if it's not keeping the limits it could be the logic board. I know it sucks waiting to speak to tech support. Have your Model # and serial # ready. If it's under warranty Chamberlain will send you a new board. I would definitely go that route. Also tell them Garage Door Genius needs his check!! Lolz

[@philipblair260]

@@garagedoorgenius They had me disengage the door, set limits, run up & down and engage the door. It worked perfectly. A little undocumented trick.

[@jgdscd]

Unbelievable I have spent over an hour trying to get this to work and in minutes following you I am done . Thanks so much

[@garagedoorgenius]

Glad to help, James! 👊🏼

[@eltonbrown2344]

Thanks!

[@garagedoorgenius]

Thank you sir! Really cool of you to give a Super Thanks!

[@skintone007]

Thank you so much for sharing ...Straight to the POINT!! This helps a whole lot. You Rock!!

[@garagedoorgenius]

@@skintone007 glad to help! 🙏🏼

[@Farmerdan_1]

Worked well with my Chamberlain chain drive, I should be able to get my truck in the garage now thanks for the help!

[@garagedoorgenius]

You're welcome 😊!

[@brenterwin1310]

Awesome video! Before I watched this video the chain was way too loose, the bar was bowed from all of the pressure from the cable side, and the cable side was so tight It looked like the cable would cut your head off. I watched your video and it was 1,2,3 and everything worked perfect! You saved me a lot of grief!! Thank you so much for the video.

[@garagedoorgenius]

Brent Erwin That's awesome bud! Good job in taking control of the situation. Thanks for watching!

[@oncdoc01]

Thank you! The manual for the 6753T DOES NOT mention the required force adjustment. The installers had no idea why the door would open, but not close. I've sent the installers links to your videos. Again. many thank!

[@garagedoorgenius]

I really appreciate the positive feedback! Thanks for the support.

[@TraciMoser]

Thank God we found this video! Finally worked!

[@garagedoorgenius]

Awesome! So glad to help you folks.

[@dicksoncamilo7214]

Thank you for your video! You are the only one who have explained this correctly.

[@garagedoorgenius]

🙏

[@jackmeeks2249]

This video was awsome , my manual never mention how to bump the buttons (up/down) . Knowing this , made it so easy to adjust the door . Thank you , thank you ,thank you !

[@garagedoorgenius]

You're welcome 😊!

[@josephbriceno2799]

Your audio...😂 Sounds like you are in the middle of a cicada invasion and your garage door opener is radioactive. LOL! But great video my friend! Thanks, you solved my issue perfectly, and explained it very well.

[@garagedoorgenius]

@@josephbriceno2799 😂 you're very welcome! Thanks for the comment.

[@scotth1946]

Excellent! Thank you ! Exactly what I needed... Programming the unit isn't intuitive, so thanks for your help!

[@garagedoorgenius]

Glad to help, Scott! 👍🏼

[@jimg9613]

Thanx for the comprehensive and calm explanation. Better than the manual.

[@garagedoorgenius]

🙏

[@jamesnketiah]

You really 🎉solve my problem by making a video about it

[@garagedoorgenius]

@@jamesnketiah that's awesome! Thanks for the comment 🙂.

[@jamesnketiah]

Thnx so much

[@MagixScience]

Thank you for this video, this thing was driving me nuts. Got it from a friend with no manual or info. Didn't know the pressure control either. Beautiful video!

[@garagedoorgenius]

Awesomeness !! Thanks for watching.

[@Gonzo3313]

ok....thank you very much...after 8 hours and 2 days it finally works. mysterious things happening in the garage. if it doesn't work double check everything. ..wires and all....somehow the wires got cut...must be a ghost...lol project done. thx for help!

[@garagedoorgenius]

+Patrick Jordan Glad it's up and running Pat!!

[@kristyedison7905]

Hii! Thx for doing this but what do jbdo if it keeps blinking and won't go down at the final step of ptessure?

[@garagedoorgenius]

Check those safety sensors. 👍🏼

[@KAT_JJ]

I followed all the steps, but when I get to the door going down, it does nothing just blinks

[@garagedoorgenius]

Does it blink 10 times? If so, check the alignment of the sensors.

[@shubuua]

@@garagedoorgeniuswhat about the clicker button when I press the remote the unit arrow lights blink but nothing happens.

[@garagedoorgenius]

@@shubuua just press the yellow circle button in and out. Then press the remote twice! 👊🏼

[@MrKingru30]

Thanks for your help! They way they tell you to program it does not work! Your are the Man!

[@garagedoorgenius]

I appreciate the awesome feedback 😃.

[@ryananderson4594]

thanks for saving the day for me a 75 yr old frustrated man

[@garagedoorgenius]

Not all heros wear capes! Thanks for watching 😊

[@jakeritchie9694]

Is there a way to do this physically? It seems like the "Up" button on mine is broken. The black and down buttons are fine but the up doesn't respond when pressed at all.

[@hamer3mark]

Very helpful. But I still have the 4-1 error on the keypad. Springs are not broken and I have reprogrammed the limits - twice. Now what? Thanks.

[@garagedoorgenius]

@@hamer3mark how does the door feel manually? Can you pull it up halfway and let go without it falling to the floor? 4-1 error is definitely a force control issue.

[@michaelmankowski5092]

Very helpful. Far better then the other one I watched. You ga e far better instruction.

[@garagedoorgenius]

Thank you Michael! 🙏

[@kevinf4975]

Had to redo my limits after the drive chain jammed. So easy with this video, thanks!!!

[@garagedoorgenius]

Glad to help!

[@loneranger1791]

You’re The Best Man! 💪🏽

[@garagedoorgenius]

@@loneranger1791 thanks bruv! 👊🏼

[@THATS_CHARMING]

Thank you so much ! This solved the problem for me ! My garage wasn’t going up all the way after we had a thunderstorm

[@oscarservice7407]

Thanks 🙏🏻 you save me some money I appreciate 👍👍👍👍👍👍👍👍

[@garagedoorgenius]

@@oscarservice7407 saving money is the name of the game! 👊🏼 Thanks for the comment 🙂.

[@pepsicolachao4537]

Can you make a video of how to program a Chamberlain opener manufactured in 2022 or newer with the Step Saver feature?

[@garagedoorgenius]

I sure will!

[@cmendeezy858]

Hey I have the same Model and was wondering if this product is capable with wifi. Thanks Much

[@kmeisterus]

MUCH better than the directions that came with the opener. They don't make clear it's the black button that's needed to make this work. It's much easier than other openers, but this made things a bit more intuitive.

[@garagedoorgenius]

kmeisterus Thanks man! I appreciate the comment.

[@JaffaRoad]

Which is the learn bottom for changing the code on the key pad?

[@garagedoorgenius]

The circle yellow button. 👍🏼

[@JaffaRoad]

@@garagedoorgenius thanks - the big yellow circle or the little one? I tried both but neither seems to get the keypad to "take" a new code,

[@garagedoorgenius]

@@JaffaRoad big yellow circle. Try this. Go over to your wall button. Flip the lid open. In the upper left corner. You'll see a button that says learn. Press it two times. Go to your keypad and enter your four digit code. Then press enter. That's another way to program remotes or keypads.

[@Wellcaptured]

Easier than the Chamberlain manual! Great video.. thanks!!

[@garagedoorgenius]

No problem and you're welcome!!

[@artpalo9323]

Fantastic! Thanks for making a very clear description.

[@garagedoorgenius]

@@artpalo9323 thanks for the comment!

[@frankphillips7436]

Thank you sir!! I’ll echo the rest of the comments. Chamberlain support should just link to this video!

[@garagedoorgenius]

Thank you for the comment!

[@alexm8526]

Good video, I'm trying to figure out why my garage door opens all the way on it's own. Not sure if it's a weird coincidence but it's happened when I've stepped out of my front door to leave for work and when I've come home from work.

[@garagedoorgenius]

Either someone else's remote is opening it or some out side signal. Easy fix, clear the memory. Press the learn button and hold it in until the LED light goes out. You'll have to reprogram remotes and the keypad. 👍🏼💯

[@esppics21]

Same here I winged it and the belt was loose on one side and tight on the other because of too much pressure on the way down. Followed your instructions now works like butter.

[@garagedoorgenius]

Eddie Sanchez Bad Ass!!

[@esppics21]

Thank you for the Video!!!

[@plebonhomme6982]

Hello sir, everything works fine when I make the first steps of adjusting the door. I adjust up and down the travel limit, then I press the black button in the hope I can finally just press the up button one time but that moment never come. It's like the motor doesn't want me to reach the final step which starts at 3:25 , it keeps repeating these first steps. Any idea? Thanks for your reply, from France !

[@garagedoorgenius]

@@plebonhomme6982 thanks for replying from France! That is so cool bruv. 😎 Okay, when you set the up limit and then the down, the UP arrow should start blinking. Press the up arrow and let it cycle all the way open. Then the down arrow should be blinking. Press the down arrow and let it fully close. At that point programming is done.

[@plebonhomme6982]

@@garagedoorgenius Yes I understand that, but that step never comes, that's the problem. It's like I'm stuck with the adjusting steps, The UP arrow blinks but it won't do the cycle by itself, it's like I have the adjust the up limit once again and the down one forever. But thanks for replying, it's 1 AM in my country and I'm going crazy over that silly door lol.

[@garagedoorgenius]

@@plebonhomme6982 hmm...that's strange. If it were me write down the serial number and model number and call Chamberlain tech support. I'm leaning towards a bad logic board. It's not letting you continue to the last step. I've installed brand new out of the box before and have had a bad circuit board.

[@plebonhomme6982]

@@garagedoorgenius Yep, I think I'll call them later since I have no other choice. Thanks for your help !

[@garagedoorgenius]

@@plebonhomme6982 let me know what you find out. 👍🏼

[@rmb1731]

Any video available for a door that opens by itself?🙏

[@garagedoorgenius]

Just press and hold the learn button. As you're holding it in (not letting go), wait for the LED light to go off. Then let go. You just cleared the memory. An outside source signal is activating your opener. Then you'll have to reprogram the remotes/keypad. That'll take care of phantom openings.

[@fyrfox2000]

Awesome easy adjustment video. Thank you! The instructions that came with it make No sense. Thanks again!

[@garagedoorgenius]

Glad to help! Thanks for commenting. 🙏🏼

[@michaelschaefer9424]

My down arrow lights but it doesn’t go down and the lights flick three times but the door won’t go down what’s the issue??

[@michaelschaefer9424]

Flicker 10 times?

[@michaelschaefer9424]

Door won’t go down

[@garagedoorgenius]

@@michaelschaefer9424 your safety sensors aren't in alignment. You need to square them up a little bit better than what they are. 10 flashes means sensor issue.

[@michaelschaefer9424]

@@garagedoorgenius thanks !! I got it !! 👍

[@garagedoorgenius]

@@michaelschaefer9424 awesome 😎! You da man.

[@kellytruong6684]

I am trying to re program my clickers and now the rectangular button between the up and down arrow are blinking? Any tips on how to stop that and undo what I've done?

[@garagedoorgenius]

I would just unplug it for 30 seconds. Then see what happens. Even if you have to reprogram the remote.

[@japysingh1986]

Good job mate Keep it up This is perfect job Thanks

[@garagedoorgenius]

@@japysingh1986 thanks 🙏🏼!

[@zacksgaragedoorserviceandr1208]

To be honest I’m gonna give you some good credit on the emergency release rope and handle you are the first garage door installer that I seen who actually tied off correctly so please keep up the good work on doing that and if you have any access rope please just trim it burn and if you want or just leave it but the way you have it set up good job

[@garagedoorgenius]

Thank you Zackary!! Happy New Year my friend.

[@francescogiordano5544]

Wonderful explanation,thanks a lot Garage Genius

[@garagedoorgenius]

Thank you for this wonderful comment! 🙏

[@titilolaowolabi371]

Thank you for this video! I truly appreciate it. It saved me a lot of money! Thank you.

[@richardschroder5770]

I get as far as going up and down pressing the black button. Then press the up works perfectly. Stops exactly where I want. I press the down button and it starts blinking and nothing happens. I unplug wait 10 sec, start over same end result. Any help would be greatly appreciated!

[@edwardtyler8234]

Smooth as butter! Thank you sir. 🎉🎉🎉

[@garagedoorgenius]

You're welcome! 👊🏼

[@felipemorasolano1836]

What should I do if the limits get stuck before are in the expected limit, just get a sound and door back to the other limit without allowme to configure them, this start happening every time I got a power issue

[@garagedoorgenius]

@@felipemorasolano1836 so you can't reprogram the limits?

[@renepaez548]

Sorry for My English, but I have the following problem with my Chamberlain b 750. When I set up My garage opener to close and then I press the black squard button to save it, blink four times and then I can't close the garage door. Thanks

[@garagedoorgenius]

Did you program the (Up limit setting) first?

[@gabrielwilliamson]

Soooo... what do you do when the down force adjustment isn't programming? The door move a few inches to a few feet or so then stops and comes back up and side lightbulbs flash. The bottom beams are lined up. The door worked fine for a few years now doesn't shut unless you hold the main control button the entire way down. Also, it does this with or without the door engaged, it does it even with just just the carriage.

[@garagedoorgenius]

Hmm..well the flashing light bulb is our indicator it's a sensor issue. Trace the sensor wires all the way back to the machine. Check to make sure the sensor wire isn't being pinched. I'd say it's wired up wrong, but since it's been working for awhile that eliminates that. Definitely sensor related.

[@gabrielwilliamson]

@@garagedoorgenius sensors are new as of end of last year. Definitely wired correctly. Door still ride the track smoothly on its own. Garage door opener carriage goes up just fine, but won't go down on its own with or without door. I put this opener in when we bought the house in 2013. The genie on my wife's side of the garage works with no issues and looks to be maybe one of genies first screw drive models. Looks like I'm buying another new opener for my side. I'll just get a basic one this time. Battery backup was nice but never got it hooked up to my phone.

[@garagedoorgenius]

@@gabrielwilliamson Before you replace the unit. Take the sensors off, leave about a foot of wire, cut the rest off. Take the sensors up to the power head and wire them up. Point them at each other and see if it works. Basically eliminating the long stretch of wire. Just to see if it's not a wire issue.

[@gabrielwilliamson]

@@garagedoorgenius , no change in outcome with the sensors on short wires. The unit must think its hitting something on the way down. Maybe faulty control board.

[@garagedoorgenius]

@@gabrielwilliamson That sucks bro. Definitely could be a logic board.

[@mustafael-amin9163]

I have a HD420EVP and I did the troubleshooting codes but it still fails to go down all the way without returning upwards.do you think I need a logic board?Any suggestions?

[@garagedoorgenius]

Here's what I would do. Get the Model number and serial number handy. Call Chamberlain tech support. If anything is faulty on that machine they will know the warranty. They are really good at honoring that.

[@mustafael-amin9163]

@@garagedoorgeniuspretty sure the warranty expired ( over 20yrs old).I wonder if removing and reinstalling the logic board would “reset” it?

[@garagedoorgenius]

@@mustafael-amin9163 I don't think that would help. I mean you can try it. If it's got a yellow learn button it's definitely not 20 years old.

[@mustafael-amin9163]

@@garagedoorgenius ,correct.the manufacturing date was 2015.And reinstalling the old logic board didn’t work.

[@garagedoorgenius]

@@mustafael-amin9163 dang that sucks. Normally parts warranty is 5 years. You could buy a new board or just replace the machine unfortunately.

[@richparker8416]

Thanks for the video.my problem is always once I’ve set the down limit and then try the force control the door always tries go past whatever limit I’ve set. And then just the door just opens again. I even set the travel limit about 6 inches above the ground but still continues to over open. Is this a travel module issue?

[@garagedoorgenius]

Travel module would be my guess. I would contact tech support. Have the model and serial # ready. May get one for free. 👍🏼

[@richparker8416]

@@garagedoorgenius thank you

[@garagedoorgenius]

@@richparker8416 no problem!

[@jandst.6634]

Great video..... So how do I readjust the down travel distance after programming? Do I have to go through the up travel and re-set it etc? When it travels down it stops and makes a click sound like it has bottomed out or overloaded. Guy that installed it said that is normal... Been working for about 6 mos but I do not like the sound... Broke the pulley now.

[@garagedoorgenius]

J and S T. Ouch! If it broke the pulley then it's definitely set to hard. Yea, unfortunately you have to go through the programming steps again. But it only takes a few minutes. Thanks for watching!

[@jandst.6634]

OK, thought that was the case... Gotta wait for another pulley from Azon....

[@munozinni]

Hola señor Richard... the unit we have is a chamberlain whisper drive plus... I will google it to find out more information about it... thank you so much for sharing this video....

[@garagedoorgenius]

Whisper Drive plus I believe the adjustments are on the side of the unit. You wanna back off the (down limit) if the opener is closing to hard.

[@garagedoorgenius]

You'll need a flat head screwdriver.

[@munozinni]

Thank you so much señor Richard for the tip I think my son(teenager)will follow all your advice and tips...may God bless your business with plenty of work and new customers...Gracias!!!

[@stasiu3269]

@garagedoorgenius Thanks so much for this video!!!!! Chamberlain's manual is really poor because there is no image of the back of the unit and so their instruction about the adjustment button is not obvious and it seems like you should start the process by using the arrows. Your video saved my Sunday! Thank you!

[@garagedoorgenius]

You're very welcome! Glad to help my guy! 💯🙏

[@marlongordon390]

Thanks for the info, watching from Jamaica 👍👍

[@garagedoorgenius]

You're very welcome! Yeah Boi! 🔥💯🔥

[@ozarkdaredevils]

Excellent video and thank you ..... Very well explained .

[@garagedoorgenius]

I really appreciate the awesome comment 😊. Glad to help!

[@honestnewsnet]

When I press the down arrow, it goes back up so it won’t go down in the programming process.

[@garagedoorgenius]

Check those pesky safety sensors. That'll cause it not to go down.

[@honestnewsnet]

@@garagedoorgenius I can’t believe a little piece of dust on sensor was causing the problem. Thanks

[@garagedoorgenius]

@@honestnewsnet yeah those sensors can be finicky. Glad that's all it was! 💯🤘🏼

[@sooldt6591]

Hello Genius : This was very good explained. thank you fo making this video. Have a nice day. So Oldt

[@garagedoorgenius]

I'm so glad the video helped! 🙏

[@Tiesamsmith]

I tried this and it all works fine when I test it, but when I leave and use my garage door opener from my car, the garage door does not go all the way upward like I set it to do. Thoughts?

[@XellosMetallium]

I was thinking about cutting those wires but after seeing yours coiled. I like to try that.

[@garagedoorgenius]

Coil them up! Just in case you ever need to rewire. 👍🏼

[@SleeplessArt]

Thank you!!! Dude I had no idea what I was doing 😅, you got rid of my headache!!! 👍👍👍

[@mcdeigo]

i get all the way to the end where its learning the sensitivity of the door. I press up, it goes all the way up. I press down; the door starts to close and then stops and the light blinks. can you tell me what the problem is? thanks so much

[@garagedoorgenius]

Safety sensor issue. Realign them. 💯🙂

[@mcdeigo]

@@garagedoorgenius thanks alot. i'll give that a try!

[@gooch4ya]

@@mcdeigo did this work? I have the same exact issue but my sensors are on and aligned

[@mcdeigo]

@@gooch4ya worked for me too

[@gooch4ya]

@@mcdeigo I adjusted the sensors and lights are on nothing blocking them but door will still not close could there be something else wrong ?

[@beav1962]

We had a power outage and now one of my openers isn't working right. Do you know how to reset the opener so I can then re program the travel?

[@garagedoorgenius]

Ouch, power outage. If it worked before that then you may have smoked the Logic board. There's no actual "reset". All you do is put it in program mode and then go through the steps. Hope that answered your question.

[@beav1962]

@@garagedoorgenius - yeah, I was hoping for something in between working fine and burnt! Oh well, time for a service call. Thanks

[@garagedoorgenius]

Those boards are easy to change out just FYI 😊.

[@garagedoorgenius]

@@beav1962 when you press the black button does it go into (up) limit programming mode? Or is it dead?

[@beav1962]

@@garagedoorgenius - the up arrow and down arrow buttons work somewhat but they're not nearly as responsive as other videos show. Sluggish, not precise response.

[@Himah411]

Thank you very much for your easy way to fix my door issue and because of your video I did it and fixed the adjustment !!

[@garagedoorgenius]

🙏

[@nathanurick8320]

Richard I know it’s been some years but I have this same unit but my problem is my key pad stopped working so I bought a new one and it also isn’t communicating with the inside unit. Any ideas. I’ve went through all the reprogramming things but it still doesn’t work.

[@garagedoorgenius]

Does your remotes work just fine? Those keypads are really easy to program. It's a matter of just pressing and releasing the learn button, enter a four digit pin, press enter twice. If it's not picking up It could be some signal from the house that's interfering or the receiver is having an issue.

[@garagedoorgenius]

Also two make sure that the machine doesn't have LED light bulbs in it. A lot of LED light bulbs will put out interference.

[@nathanurick8320]

@@garagedoorgenius yes my car remotes work good, I even bought the same key pad new yesterday and went through all those push this button steps but still nothing. Things like this drive me crazy

[@joetoyota7903]

Request back wages from Chamberlain for providing this valuable resource. Their manual is a bolloxed up mess to understand. I tried their 800#, but that explanation on programming wasn't any better. When we couldn't get the unit to respond to input, they suggested I need a logic board. After waiting a month and a half, I went back to Lowes., and they were great. I only had to exchange my motor unit with the bad logic board, with a new motor unit, took it home, and with your video to program, it's now up and running and working great. I apparently didn't have to set the force, b/c after setting the up and down travel, the light blinked 10 times, the unit went up and down by itself and then stopped. The wall button was blinking, I pushed it twice to syncro it, then watched your other video on programming remotes, and now everything works as it should. Contact Chamberlain and tell them you'll help them re-write the instructions.....................for a fee of course. Your instructions were to the point, and spot on and easy to follow and understand. I appreciate it. Thank you. By the way, my unit is a Chamberlain, model C2102.

[@garagedoorgenius]

I really appreciate the kind words! Glad you got it up and running. I try and make easy to follow videos. I'm with ya, Chamberlain show me the money! 💯💪🏼

[@Moe504.]

Thank you Sir i know this is a very old video but it worked for me i appreciate it very much

[@garagedoorgenius]

Oldie but a goodie! I appreciate the feedback.

[@Moe504.]

@@garagedoorgenius NP

[@423montecarlo]

Thank you sooo much man saved the day👍👍

[@3ddie21]

Thank you so much my garage door and motor were replaced a few months ago and randomly I started getting error messages for different things such as excessive closing and opening force, sometimes cable tension failure because the garage refused to stay closed without the light blinking. It would go all the way down then immediately back up. I had to manually close it because I had no idea what the cause was and after just reprogramming the whole thing the this solved the issue. Last few saver 🙏🏻

[@garagedoorgenius]

You're welcome!

[@gootieboy1348]

After I set the down position the garage opener blinks five times and does one long beep and then doesn’t work any tips?

[@garagedoorgenius]

If the garage door makes contact with an obstruction while closing, the door will reverse, the opener will beep and the lights will flash 5 times. Does your door work good manually? It's not binding or dragging anywhere.

[@TheSquiggyacfd]

I am in need of help. I have the same opener as in this video. When it opens, the trolley slams because it's going too far. I set travel limits like you said and stop it about 2 inches from the end. It works perfectly for several open and close cycles. The next day it's back to slamming open. It seems like it forgets the travel limits set. I have a Chamberlain HomeLink bridge connected as well. Could this be causing the issue? Thanks in advance

[@garagedoorgenius]

Home Link bridge is alright. It wouldn't cause that issue. I would call Chamberlain tech support, have the model # and serial # ready. If I was a betting man I'd lay my money down it's either a control module or Logic board.

[@TheSquiggyacfd]

@@garagedoorgenius Thanks for the quick response. Will try that.

[@garagedoorgenius]

@@TheSquiggyacfd No problem. Let me know the verdict!

[@cwsosby]

I’m getting an error code 15 that I have been able to fix by unplugging everything for a bit. I’m gonna try to reprogram it to see if it will keep me from getting this error in the future. If not, guess I will replace the logic board. Thanks for the video!!!!

[@donnacampbell1111]

Thank you so much. My garage door is working again😊😊

[@garagedoorgenius]

Glad to help! ☺️

[@nrfa6229]

I just installed my new opener like you have. I'm having issues with the garage door closing!! Instructions say, to make sure that nothing is blocking the reverse sensors, which "nothing" is. On the part where I say it has to get a feel for it? It comes up fine, stops where I have it programmed. Then when I press down it, it comes right back up? I had it working right off the bat, now it won't close, even when I programmed it right. The eye lens on the green one, sounds loose when I barley touch it, where the other doesn't. Any help would be greatly appreciated. Thanks

[@Worshiper1298]

How do you set it up with your car mirror to open and close?

[@garagedoorgenius]

@@Worshiper1298 hey thanks for commenting! One of these videos will get you going! kzbin.info/aero/PLNBqhck32l2WY-4UmGscNcK7kRymr8Frs&si=okhnoSnmn7Km4hB5

[@getutrucking9405]

Thanks!!! This was excellent

[@garagedoorgenius]

You're very welcome! 👍🏼

[@Ingram7519]

I have the b4505t version. Be aware that it does not have a battery back up. I fought it tooth and nail and to reset the unit to start the travel over, you leave it unplugged for a few minutes. Once I did that I followed this video and finally found success.

[@toddharris3035]

Definitely better than the manufacturers video thanks

[@Egsworld]

How do I get my wall garage door opener connected to the garage chamberlain ??? And the garage door opener car opener? I think I disconnected everything and now I cant open the garage door …

[@garagedoorgenius]

@@Egsworld does your button that's mounted on the wall have a light that's on?

[@jqmylife9805]

I’ve brought the 750. And all day yesterday we have a major issue. At times the garage door will operate but at first as it closing it will come right back up reaching around where the sensors are. Can you give me some tips what you think my issue is

[@garagedoorgenius]

Make sure the sensors are in line. If it reverses and clicks 10 times, then that's an indication the sensors are misaligned. Just reposition them on the vert track. B750 is an awesome machine. Super popular here in Austin TX 😎.

[@jqmylife9805]

Garage Door Genius I’ve notice that that lights keep blinking multi times. Let me try that. Been working on it since 9am this and all day yesy

[@darnellstewart9297]

Thank you bro, Straight to the point. Jeez

[@garagedoorgenius]

Glad to help my guy! 👊🏼

[@HDmvp41]

We've done these steps a few times. Works great for like 3 open/close cycles. After that it gets way out of sync, jams into the top bolt, then tries to go way too far down and comes back up automatically. We also have a Chamberlain model with a 10 ft door. Any ideas how to fix? Thanks.

[@garagedoorgenius]

Sounds like a possible control module or circuit board. How old is the machine? May be worth your time calling Chamberlain tech support. Have the model # and serial number ready. They can tell you if it's under warranty. If so, they'll ship you what you need. Hope this helps.