Nice and clear description. A big thumbs up. Please make another video of it with actual working mode. I mean connecting a heater and humidifier to it.
@mykitvideos59374 жыл бұрын
Ok. Thank you so much
@1973jdmc3 жыл бұрын
Thank you so much. There’s NO video telling you about the upper and lower limits- THANK YOU
@mykitvideos59373 жыл бұрын
Welcome
@kamiloalvarezrego96843 жыл бұрын
El unico señor que explica bien de verdad como se conecta todo. Los demas solo te enredan.... Excelente video😁✌️
@mykitvideos59373 жыл бұрын
Thank you
@chronicreview35383 жыл бұрын
Good video. My unit didn’t come with a manual. Life saver. Thank You 🙏
@mykitvideos59373 жыл бұрын
Welcome
@rajiv60895 жыл бұрын
Nicely explained, I am buying this product online and was confused about how could these two buttons will set the upper and lower limits .... you made it clear man ! Thanks !
@mykitvideos59375 жыл бұрын
I am glad my video helped. Kindly Subscribe and LIKE ❤️ my channel please
@achimgazelle3641 Жыл бұрын
So my incubator is made of Sytropor and use the STC 1000. So far could successfully hatch quails. In the 2nd brood, the chicks are unfortunately all died in the egg. My humidity meter was installed in the wrong place, the condensation ran directly into the meter and thus I had wrong values and believed that the humidity is too high tried to regulate down by opening the lid of the incubator, but in reality I have dried the air even more. So that this mistake does not happen to me again, I have now decided to rebuild my incubator. The whole thing works with 220AC only the fan runs manually with 12V. After my research I have read everywhere that a temperature fluctuation of more than 0.2 C° is not good for the embryo. Unfortunately, the STC 1000 does not keep the temperature constant. It has a temperature switch on difference of at least 0,3C°. This means that if I set for example 37,5C° then when this temperature is reached the heater is switched off and the temperature drops to 37,2C° (0,3C°temperature switch on difference) so that the heater switches on again. This phenomenon is unfortunately not suitable for a healthy brood. That is why I am interested in this model STC-3028 1st question Is the exact set temperature maintained here? So at the set value, the heater will also heat permanently? How many degrees Celsius is the temperature switch-on difference? 2nd question How can I connect a 5V donut humidity controller? Do I have to connect a step down converter 220AC>5V DC in the phase cable (+)?
@cacahuateconchile35394 жыл бұрын
very good explanation the best of all in KZbin...
@mykitvideos59374 жыл бұрын
Thank you
@winstonclarke92215 жыл бұрын
This is a wonderful piece of 2 in 1 equipment.
@mykitvideos59375 жыл бұрын
Oh yeah.
@mykitvideos59375 жыл бұрын
Do you have one already
@slava1234ify Жыл бұрын
Can you please tell me if this sensor can be installed outdoors? Is the sun and rain a hindrance?
@badr15123 жыл бұрын
شكرا للترجمة . واضح جدا 👍
@jsepulveda75504 жыл бұрын
Thanks for your explanation. It helped me.
@mykitvideos59373 жыл бұрын
Welcome
@benjaminjohannes41622 жыл бұрын
Nice video,very educational
@mykitvideos59372 жыл бұрын
thanks
@cmsense8193 Жыл бұрын
The humidifier controller displays very low humidity. I tried to calibrate as you instructed but it only allows up to 50. Can I reset everything?
@mykitvideos5937 Жыл бұрын
just set the calibration back to 0.0
@windelusita8613 жыл бұрын
Thanks. Helpfull video. 5star
@lamisticakandi14474 жыл бұрын
Thanks very much for your teaching
@gregoryyoungmorris2814 жыл бұрын
Is there any way to get this to operate in dehumidify mode? I'm using it to control a drying oven, and I want it to turn on a fan when it gets too humid.
@paulpangilinan95134 жыл бұрын
I have just bought stc 3028 thermostat humid controller online for my incubator but I am really confused about how set properly set the temperature because it will display first LLL when I switch on this unit to start, and the light bulb still not lighting, can you explain further? Secondly, stc 3028 has only 3 wires for sensor as I have seen in the diagram in the internet ,but this one which I bought-stc 3028 has four wires which are blue, yellow,green and red exactly like stc 2000 sensor...please help me sir,,,
@iqbalahmadiqbal3 жыл бұрын
How accurate is this device??
@DeewaanBhai4 жыл бұрын
Hello, what's the difference between this model and sht 2000 , which one should I buy?
@mykitvideos59374 жыл бұрын
Mainly the screen display. And number of wire terminals
@jujucattys156 Жыл бұрын
What’s best way to calibrate the temp make shore the temp is ready sis correct
@mykitvideos5937 Жыл бұрын
Clinical thermometers are good
@mykitvideos5937 Жыл бұрын
kzbin.info/www/bejne/q6K8couFrr-Me68
@sethasante47723 жыл бұрын
Nice and simple
@mykitvideos59373 жыл бұрын
Thanks
@mykitvideos59373 жыл бұрын
I showed how to calibrate too
@bullyberto26384 жыл бұрын
You showed the donut usb humidifier in part1 but you haven't showed how to integrate it to the thermostat. I want to see it become integrated with the sensor.
@sbmmobilesdpi4 жыл бұрын
Which one controller best for egg incubator pls tell me
@mykitvideos59374 жыл бұрын
Depends on your budget. I love the ZL7801D
@dantasudi2yt5 жыл бұрын
Hi, I'm from Brazil and I did my eggs incubator and used one of this model. But they have a problem. The temperature from STC3028 display is 38º but on the others thermometers, is down near 36,1º 36,0º. dif. near 2,0º Have way to calibrate to exacty?
@mykitvideos59375 жыл бұрын
Press the 2 buttons at the same time and adjust. For temperature calibration, press both buttons at the top
@mykitvideos59375 жыл бұрын
Let me know if it works For you. If not I will make a video on it
@dantasudi2yt5 жыл бұрын
@@mykitvideos5937 Good information.... well if it have way to adjust. please if you have video to how can do it, please tell me where is it ... I'll very thanks to help me....
@mykitvideos59375 жыл бұрын
Have you subscribed to my Channel
@mykitvideos59375 жыл бұрын
I can't find a video on it but I will make one probably tomorrow. Just subscribe I will get it done
@ลุงต๋อม4 жыл бұрын
Thank you so much
@zatechincubatormachine34374 жыл бұрын
Thanks for ur explanation but i want know how to humidity fan and estracter if the heat is high
@mykitvideos59374 жыл бұрын
Ok I will make a video on that topic. Just make sure you subscribe so that when I post it you will know
@HappybeseleBeseleАй бұрын
Thanks sir
@lukenguyen86235 жыл бұрын
Hi, I just got this device and want use it to control just my 24V humidifier. I don't need it to control my heater. I also use 24V input power not 110V. Could you tell me how to wire it?
@mykitvideos59375 жыл бұрын
So what is the input voltage of your controller
@currentreviews24373 жыл бұрын
Impressive. More education
@mykitvideos59373 жыл бұрын
Thank you
@musevenihakizimana54613 жыл бұрын
Good video
@mykitvideos59373 жыл бұрын
Thanks
@lukenguyen86235 жыл бұрын
24 V for input voltage. The humidifier also uses 24V
@AlexeyMatushevsky4 жыл бұрын
Nice explanation.! Thank you, Can you comment on how to setup the %RH for dehumidifier! Thanks
@mykitvideos59374 жыл бұрын
Okay.
@News-Now-UK4 жыл бұрын
I am also stuck here. Did you manage to sort it and if so how? I am beginning to think it is for a humidifier and not a de-himidifier.
@mykitvideos59374 жыл бұрын
Yes it can be used as dehumidifier
@mykitvideos59374 жыл бұрын
Just set it the opposite way. UP button is used to set the high humidity u want And DOWN button is used to set the low humidity you want
@mykitvideos59374 жыл бұрын
Let's make it pratical. At what humidity do u want your dehumidifier to start working
@gregmilner25804 жыл бұрын
How much for the 12 converter and fan and the link
@mrsimangop5 жыл бұрын
How does one get this?. How much and how long will it take to get this into SA? . I also want to know about xm-18 . Thanks
@mykitvideos59375 жыл бұрын
Hi Promise. I have videos on XM-18 too
@shivakumarpatil78554 жыл бұрын
How much this device cost? Where did you buy this?
@mykitvideos59374 жыл бұрын
Please the link is in the description
@ปูนามิวสิกแก้วหานาม5 жыл бұрын
ขอวิธีต่อหลอดไฟ และพัดลมหน่อยครับ เป็นรูปน่ะครับ
@mykitvideos59375 жыл бұрын
??? 🙏
@mykitvideos59375 жыл бұрын
আমার জন্য ইংরেজী অনুবাদ করুন
@manuelgomez51743 жыл бұрын
Nice vedio. How we reduce Humidity?
@mykitvideos59373 жыл бұрын
What humidity range do u want, tell me higher and lower Humidity u want
@manuelgomez51743 жыл бұрын
@@mykitvideos5937 Hi, how are you. My humidity range 50 to 65 and 65 to 70 for incubator.
@manuelgomez51743 жыл бұрын
@@mykitvideos5937 STC 3028 showing in humidity display HHH most of the times
@mykitvideos59373 жыл бұрын
Is your sensor connected well
@manuelgomez51743 жыл бұрын
@@mykitvideos5937 yes sensor connected well
@pablodeestrada30804 жыл бұрын
Can I use this controller for cooling?
@mykitvideos59374 жыл бұрын
Yes Sir
@mykitvideos59374 жыл бұрын
That means your settings will be opposite of mine
@ramonmangampo32424 жыл бұрын
Nice video.
@holzuhrenratgeber39674 жыл бұрын
Simple step by step user guide: nerd-corner.com/stc-3008-2-temperature-sensors-in-one-device-full-user-guide/
@khondo19974 жыл бұрын
Hi bro, Can I use 12 volt inverter?
@mykitvideos59374 жыл бұрын
Yes. But u should consider the capacity of your inverter
@mykitvideos59374 жыл бұрын
What items do u want the inverter to power
@khondo19974 жыл бұрын
I have 150mah battery inverter
@indralie61525 жыл бұрын
Hi...how to calibrate this model?
@mykitvideos59375 жыл бұрын
I will upload the video tomorrow please.
@mykitvideos59375 жыл бұрын
Kindly subscribe first so that you don't miss the video
@mykitvideos59375 жыл бұрын
This video shows how to calibrate kzbin.info/www/bejne/q6K8couFrr-Me68
@mykitvideos59375 жыл бұрын
Hi Mr Indra. Have you watched the video on calibration
@kiranbhoye94564 жыл бұрын
Yechyat ky ghanta dakhavlay
@mykitvideos59374 жыл бұрын
??
@MultiRafaelw3004 жыл бұрын
У меня он наебнулся в первый же день. Кто может сделать, или сброс